Very big problem....please help me

Hai,
I am in big trouble... that I am developing site in jsp in that i need to print one htmltextarea editor.I am using ephoxlive editor that is third party tool.
Here I am able to retrive all content from this editor then I need to print this content if it is successfully printed based on that I need to update the print_status column in database...
Becaz i will allow the user to print only once... based on this column...
How i can handle the printer status..
please help...
-Thiru

http://forum.java.sun.com/thread.jsp?forum=45&thread=446990&tstart=0&trange=15

Similar Messages

  • KT4AV Big problems Please Help!!!

    I am having a few problems. I have just built a new computer here are the specs:
    AMD Palimino 1.9GHZ
    MSI KT4AV
    Winfast 128DDR 8X AGP
    80GB Seagate Harddrive
    128SDRAM
    I have tried booting this up and it boots up then after about 10 secs it just turns off and makes the "nee nar nee nar" sound like an ambulance. Can anybody please help?

    i had same problems before..i think its the ram problem..just give it a small 'twitch' to align it a bit and it boots ok..sometimes when i mess up inside my mobo it occurs again and i just have to try and twitch it again untll it's ok....i think the ram slots are not so good and the rams are quite 'loose'..good luck

  • I have a big problem please help

    Hi...
    Im trying to log in to my MacBook laptop with a password...but the problem is that the letter r is being only capital...and the Shift button is writing also capital r...so as my password has the letter r in it then I cant log in to my laptop...please help I need to fix it all my work is there...
    Thank you

    I'm not suggesting anything. Your options are:
    Start over. It'll take anywhere between a few days and a few months depending on your CD collection
    Go to a CD ripping agency. It'll take a day or two, and they charge about a buck or two a CD.
    Go to a data recovery agency. They charge a few hundred dollars an hour.

  • I have a big problem please help me

    Hi,
    first of all, excuse my very bad english.
    I have a big problem. I made a big movie (2 hours) with a lot of effect in iMovie HD and I made a big mistake : I erase it without burning.
    Is there a way to save my life ??? A secret folder with a backup ?
    thanks a lot

    Hi yab-yab:
    Welcome to the discussions! (Your English is not bad)
    How did you delete it? Empty imovie trash? Empty Finder trash?
    Did you look in Applications->iMovie (or wherever you saved it) and see if the movie was saved there? if it is not there, it is gone ;(
    Sue

  • Some very basic problem PLEASE HELP ME :(

    hi,
    im just new to EJB's and WebLogic. i have integrated JBuilderX with BEAweblogic 8.1 and then made simplest ejb.
    started the server.
    server successfuly startedthen made test client and while running test client i got following error...
    "EJBModule.jar": Spaces in the temporary directory path may cause WebLogic APPC utility to produce fatal compile errors.
    "EJBModule.jar": Spaces in the classpath may cause WebLogic APPC utility to produce fatal compile errors.
    "EJBModule.jar": C:\bea\jdk142_04\bin\javaw -classpath "C:\bea\weblogic81\server\lib\weblogic_sp.jar;C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogic81\server\lib\webservices.jar;C:\Documents and Settings\Administrator\jbproject\ejbsess\EJBModule.jar;" weblogic.appc -keepgenerated -forceGeneration -compiler C:/bea/jdk142_04/bin/javac "C:/Documents and Settings/Administrator/jbproject/ejbsess/EJBModule.jar.jar" -output "C:/Documents and Settings/Administrator/jbproject/ejbsess/EJBModule.jar"
    AND
    "EJBModule.jar": <Nov 3, 2004 10:47:15 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSesBean that is in the classpath. This class should only be located in the ejb-jar file.>
    "EJBModule.jar": <Nov 3, 2004 10:47:16 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSesHome that is in the classpath. This class should only be located in the ejb-jar file.>
    "EJBModule.jar": <Nov 3, 2004 10:47:16 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSes that is in the classpath. This class should only be located in the ejb-jar file.>
    "EJBModule.jar": [J2EE:160127]ERROR: Could not delete previous archive: C:\Documents and Settings\Administrator\jbproject\ejbsess\EJBModule.jar
    PLEASE HELP ME WAT TO DO....
    WAITING...
    :-(

    hi,
    i again made the whole thing with C:\project\weblogicsessproject
    i just simply made session bean and one method getMessage() which simply return String message.
    i compile that code and get following warning..
    "EjbsessModule.jar": Spaces in the temporary directory path may cause WebLogic APPC utility to produce fatal compile errors.
    then i run the server from JBuilder which runs correctly and gives the message to client that...
    <Nov 10, 2004 1:09:41 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address *.*>
    AND ON RUNNING TEST CLIENT OF JBUILDER I GET NAMING EXCEPTIONS...
    C:\bea\jdk142_04\bin\javaw -classpath "C:\project\weblogicsessproject\classes;C:\bea\weblogic81\server\lib\weblogic_sp.jar;C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogic81\server\lib\webservices.jar;C:\bea\jdk142_04\jre\lib\charsets.jar;C:\bea\jdk142_04\jre\lib\ext\dnsns.jar;C:\bea\jdk142_04\jre\lib\ext\ldapsec.jar;C:\bea\jdk142_04\jre\lib\ext\localedata.jar;C:\bea\jdk142_04\jre\lib\ext\sunjce_provider.jar;C:\bea\jdk142_04\jre\lib\im\indicim.jar;C:\bea\jdk142_04\jre\lib\im\thaiim.jar;C:\bea\jdk142_04\jre\lib\jce.jar;C:\bea\jdk142_04\jre\lib\jsse.jar;C:\bea\jdk142_04\jre\lib\plugin.jar;C:\bea\jdk142_04\jre\lib\rt.jar;C:\bea\jdk142_04\jre\lib\sunrsasign.jar;C:\bea\jdk142_04\lib\dt.jar;C:\bea\jdk142_04\lib\htmlconverter.jar;C:\bea\jdk142_04\lib\tools.jar" weblogicsessproject.WebLogicSesTestClient1
    -- Initializing bean access.
    javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved ]; remaining name 'WebLogicSes'
         at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
    -- Failed initializing bean access.
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
         at weblogic.jndi.internal.ServerNamingNode_813_WLStub.lookup(Unknown Source)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:369)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:357)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at weblogicsessproject.WebLogicSesTestClient1.initialize(WebLogicSesTestClient1.java:34)
         at weblogicsessproject.WebLogicSesTestClient1.<init>(WebLogicSesTestClient1.java:19)
         at weblogicsessproject.WebLogicSesTestClient1.main(WebLogicSesTestClient1.java:270)
    Caused by: javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:897)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:230)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:154)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:188)
         at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
         at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:108)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    IM DOING ALL THAT WITH HELP OF BORLAND WHITE PAPERS...
    please help me
    waiting

  • Macbook not booting - big problem - please help!

    Ok, here's my story.
    The macbook was re-formated, and was working fine. Software updates followed and firmware update as well. It completed well and the computer was running flawlessly for a day or two.
    After beeing shut down, it doesn't want to boot anymore.
    When i turn it on, it stays on the gray screen with the apple logo and it loads. Before OS X turns one, it shuts down.
    I have already tried all the troubleshooting that the help section offers (reset ram, check battery, reset power management etc...)
    I called Apple on the phone, the first guy suggested that i restore the firmware using the firmware restore disk that is available on their site. The computer refused to boot the CD. It also refused to boot from Mac OS X installation disk.
    I'm really out of options here.
    The second time i called, they told me they couldn't much unless i paid, since the warranty is expired.
    Any suggestions will be greatly appreciated. Hopefully i won't have to send it for repairs, because i'm on a tight budget.
    Thank you very much.
    Joey
    [email protected]

    welcome to macbook forum.
    insert your installer disk #1, restart and press alt/option and it will give you all option to boot from.
    if it only shows you to boot from installer disk system folder, that might be the sign that your HD is failed.
    or you can insert installer disk #1, restart and press C to boot right away from the isntaller dsik.
    after select the language, open utilities from menu bar and select utility / and check if your hd is mounted (on the left portion), if it mounted, choose repair disk and reboot (you might need to re-install the OS X if the system folder corrupted). But if it didn't shows up, then it might be failed as suspected.
    Since your warranty is already expired, you can consider to get a new HD yourself and install that HD and OS X yourself (cheaper than using apple genius guy at apple store).
    Good Luck.

  • Very unusual problem, please help

    Hi. I have CS4 and use an iMac with an Epson R1900 printer.  Here's my problem:  Every time I print a picture, the picture comes out with a textured background.  For example, I'm attempting to print a picture of a flower with a green background.  The picture  prints such that the background is textured (just as if I had applied a texture filter) but the the flower comes out just fine with no texturing.  This just started last night and I don't know whether I hit some sort of setting by mistake but it is frustrating the heck out of me.  I've tried printing several images and they all come out the same.  The main subject comes out fine but the background is textured or patterned.  Can anyone help me?
    My guess is somehow the program is corrupted.  Now I still have PS3 installed too (never uninstalled it when installing CS4)  and tried printing a picture.  The exact same results; textured/patterned background.  Has anyone ever had this problem before?  Appreciate any help you can give.

    Well Jeff, you were right.  I printed a test page last night and it seemed to have no problems.  Once I read your post I reprinted another page and sure enough, the yellow and black nozzles were not right.  Although they weren't completely empty, I replaced those cartridges and ran through some cleanings.  The prints then came out correctly.  The way the picture printed really threw me.  I thought these were patterns or textures but they were just due to clogged nozzles.
    Thanks for your help.  I really really appreciate it.  From now on I will definitely check the nozzels before printing especially if the printer has been standing idle for a while.  Lesson learned.  Thank you.

  • I have a big problem ,please help,please,please,pl...

    I have bought N97 recentley and I have install an application to hide the photos but all my data have been lost and i couldnt start my phone gain. My phone is not starting at all.
    any one know how to format the phone??
    please,

    If that fails your ONLY option at this stage is to return it to the retailer or visit a nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Memory fault?? very strange problem please help!

    hi!
    my computer return from lab today. i replase a CPU fan+MB fun.
    the techntion also touch the memory card because i ask him something about it and he pull it out and than return it.
    now i come to home i start the computer and suddenly i hear long beep....
    i open the case ,pull the memory card off and than return it again. all seems good .
    suddenly .in game,the computer stuck. after restart i hear long beep again!!!
    i pull out the to memory (thay connect at dual channel) and the result is this:
    whan i put one memory card in GREEN SLOT-all seems good. i try with the second memory and he work good(alone)
    whan i put the memory card in the the green connector and the other one in the green connector (BOTH) all seems good!
    whan i put the memory in the PERPEL connect-i HEAR A BEAP!  doest meter if i put one or two card. in BOTH OF THE PERPLE CONNECTORS! (and of course it beep on dual channel)
    what is the problem?

    ECC is a stick of memory that double-checks every signal before passing it on, one might say. ErrorCorrectionCode.
    You cannot have Dual Channel with only one stick. Two sticks needed.
    Reasons:
    Your two sticks can't work at the same speed. They are too different.
    Not good timings for the memory. Timings is mostly how the memory works, and how it waits.
    (You memtested so it seems as if the sticks are in good physical health. And the slots.)
    The memory sticks want different voltage, and one wont work well with what the other wants.

  • Please, I am in a very big problem I designed the project by Adobe director And you test the software on the computers on Windows and works with high quality When I tested the project on Apple Macintosh operating system, Li appeared a number of problems

    Please, I am in a very big problem
    I designed the project by Adobe director
    And you test the software on the computers on Windows and works with high quality
    When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
    But I have a problem too big
    The project works on some devices and others show me messages mistakes and why chasm different operating system version
    Apple's Macintosh and these messages
    "biosegnatures" can't be opened becouse it 's from undefined developer "
    others
    shokwave player error
    pleas what can i do

    Welcome to the Support Communities.
    m.raslan wrote:
    I tested the project on Apple Macintosh operating system
    Click on the  menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
    Update your product list
    m.raslan wrote:
    "biosegnatures" can't be opened becouse it 's from undefined developer "
    This Apple doc may help:
    OS X: About Gatekeeper
    m.raslan wrote:
    shokwave player error
    Is Shockwave Player installed?...
    http://www.adobe.com/shockwave/welcome/
    ...If not, get it here:
    http://get.adobe.com/shockwave/

  • Just upgraded to Lion, how can i use my microsoft office especially excel.  I'm getting messages that it's no longer supported.  This is a BIG problem.  Help, please.

    Just upgraded to Lion, how can I use my microsoft office especially excel.  I'm getting messages that it's no longer supported.  This is a BIG problem.  Help, please.

    Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
    All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
    Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
    Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
    Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
    Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
    Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
    Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
    Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
    This handy site can advise you what software doesn't work with the Lion.
    http://roaringapps.com/apps:table

  • Choppy video on big screens  PLEASE HELP!

    I've noticed that the videos that I have exported from CS3 are very smooth when played on a computer screen and average size tv screen, but are very choppy if played on a large TV or projected on the wall.  Is there a way to remedy this?  Please help!
    Drew.

    I think I figured out the issue.  Thanks for all your advice.  I'll repost if I have any other problems.
    Drew.
    Date: Wed, 24 Jun 2009 10:24:22 -0600
    From: [email protected]
    To: [email protected]
    Subject: Choppy video on big screens  PLEASE HELP!
    Drew,
    How is the large-screen projector connected, via a set-top DVD player to it, or by a computer connected to it? If it's via a set-top player, is it the same one used for the small-screen TV, or a different one? What is the make and model of the set-top player(s)?
    Also, what DVD media was used, and what was the burn speed used to create the DVD? Was this authored in Encore, or with some other authoring application?
    Good luck,
    Hunt
    >

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

    I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

    Hey Z,
    Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
    Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
    Project:
    - total project duration: 79:04 minutes
    - total project capacity: 4.327 GB (max. available: 4.172 GB)
    Menus:
    - number of menus in project: 1 menus
    - total menu duration: 0:39 minutes
    - total menu capacity: 37.370 MB
    Movies:
    - total movies duration: 78:25 minutes
    - total movies capacity: 4.291 GB
    I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

  • Very big problem with JSF about FORM and "id=" for HTML form's elements and

    I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
    Suppose you have something like this, to render some datas form a Java Beans :
    <h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name"/>
    </f:facet>
    <h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
    </h:column>
    </h:dataTable>
    Everything works fine...
    Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
    <td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
    You think you can use the java instructions :
    Enumeration NamesParam = request.getParameterNames();
    while (NomsParam.hasMoreElements()) {
    String NameParam = (String) NamesParam.nextElement();
    out.println("<h4>"++NameParam+ "+</h4>);
    YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
    Edited by: ungars on Jul 18, 2010 12:43 AM
    Edited by: ungars on Jul 18, 2010 12:45 AM

    While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
    However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
    In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
    "Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
    If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
    https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
    If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
    I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
    Ed

  • X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

    9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
    So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
    I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
    So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
    Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
    So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
    I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
    There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
    I don't know.. I need clarification and help, PLEASE.
    Thank you very much in advance!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

Maybe you are looking for