Very Big Videora MP4 File not copying to iTunes

Hi,
I have followed your exact steps from the Videora guide, the problem I am experiencing is that when I drag and drop my MPEG4 file into iTunes, nothing happens.
When dropped into any of the valid directories in iTunes, the + icon shows that the action is valid, but I can't see that it has put my movie into iTunes anywhere?!
The only thing that I can think of is that the movie file i'm adding is rather large, 2.3G. In fact all the DVD's i'm trying to convert are massive and takes hours?!
Has anyone else experienced this?
Help?
theOne

You may want to check your videora settings. The file size you speak off sounds like a very uncompressed file. 2.3gb is bigger than any movie file I ever had on my computer and once I run films through videora it usually makes them about a third of their original size.

Similar Messages

Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Why do I keep getting, this mp4 "was not copied to your ipod because it cannot be played on this ipod"?

Why do I keep getting, this mp4 "was not copied to your ipod because it cannot be played on this ipod"?

See:
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

Files not Copied Error Message in BB Link

Some of my iTunes music won't copy to my Z10. Here is the message I get:
Files not copied to Blackberry-AD6F as they are protected by digital rights management (DRM) technologies: 4
Midnight Bottle
Realize
Bubbly
The Little Things
Those are Colbie Caillat songs if you need to know!
Any suggestions would be great!

Hello Amber,
Thank you for your question.
Content owners use digital rights management technology (DRM) to protect their intellectual property. BlackBerry Link doesn't support audio files that use digital rights management (DRM) technologies.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I have some mp3 files not purchased from itunes on my ipod nano; recently got a new laptop - how can i transfer now those mp3 to itunes?

i try to transfer mp3 files; not purchased from itunes, from my ipod nano to my new laptop/itunes/itouch. i dont have the original files/cd;s anymore and no backup! can somebody help please

http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer

Why do .mp4 files not show up in the Finder/work in iDVD?

Hi
I downloaded some .mp4 files from the internet on my Windows PC and as per usual they are played by quicktime on my PC.
When I saved them to my external HDD and plugged it into my MBP, the folder containing the mp4 files does not appear, and neither will they import into iDVD where I am trying to burn them.
I am a new MBP user (and a happy one so far) so I am well aware I coukd be missing something here, but I thought that .mp4 was practically guaranteed to play on a Mac especially given the relationship to video iPods?
Thanks in advance for your contributions!
Macbook Pro Mac OS X (10.4.6)

Thanks, but after installing this nothing seems to have changed except that if I download the .mp4 files from my Mac they appear on the Desktop. They can be played with Quicktime but if they are played in VLC there is no sound
The folder on my external HDD which contains the .mp4 files still does not ahow up.
I am now very confused!
Does anyone have more ideas, I'll try whatever!
Thanks

Local video file (.mp4) file not play in MAC OS using netstream (NetStream.Play.StreamNotFound)

I have developed adobe air application using adobe flash builder 4.6 for Windows and Mac OS. Application allow user to download movie (.mp4) file in his system at specific location for play without live streaming. File downloading correctly in both OS and also file playing from download location in Window application correctly. but when start playing file Mac OS application not start playing.
When start playing in mac OS, NetStatusEvent.Net_Status event return "NetStream.Play.StreamNotFound" event info code. I have found one solution for mac OS is use colon notation instead of slash notation. I have tried it but it also not working.
Code:
_nc = new NetConnection();
_nc.addEventListener(NetStatusEvent.Net_Status, connectionHandler);
_nc.connect(null);
private function connectionHandler(event:NetStatusEvent):void
trace("Connection to server: " + event.info.code);
/// Get "NetStream.Play.StreamNotFound" code in mac OS.
slash notation path: /Users/mayur/Downloads/myvideo.mp4
Colon notation path: I have tried following colon notation path
1) :Users:mayur:Downloads:myvideo.mp4
2) Users:mayur:Downloads:myvideo.mp4
3) Macintosh HD:Users:mayur:Downloads:myvideo.mp4 (Macintosh HD - Drive name)
Please help me to solve this issue.

Finally I found a solution...
The problem is that AIR on Android stores the application data in the protected directory /data/... which is not accessible by StageWebView (or any browser app).
So you have to copy the video file you want to play to a temporary pubic directory on the sd-card for example and use this in StageWebView.
You also have to create a temporary html-page with the video-tag and load this page in StageWebView (not the string) because external resources are only loaded in StageWebView when using an URL.
On iOS the application storage directory is readable for StageWebView so you don't have to do this step.
Hope this helps

Postoffice-startup-file not copied from SYS-volume

We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw

It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different

How to open files (NOT copy) from external hard drive

Hello there,
I have a Western Digital My Passport external harddrive. I bought the hard drive so I could take stuff like my music off my laptop harddrive, free up space and make it run smoother.
Problem is, every time I select a music file on the ex harddrive to play in itunes, the file is copied to the laptop harddrive! Completely defeats the purpose.
Does anyone know how to stop my laptop from copying music files and just get it to play files from the external hard drive? I have looked and looked but to no avail - this is my first Mac and it is the one issue that really bugs me.
Any help will be much appreciated!
N.B. it doesn't seem to do this with other file types (documents etc.) just music files/files supported by itunes.

How are you selecting the music files? I have my entire music library on an external drive. If you go to preferences in iTunes, their is an option to select where your music library resides. I think it is under advance but I'm not sure since I don't have access to my mac.
Glor

MP4 files not playing in Quicktime 7.3

Lately, I have been getting the following error when I try to play MP4 files in quicktime on my Mac:
"The movie could not be opened. Operation could not be completed. (OSStatus error -50.)"
This error also prevents me from adding the files to iTunes. The weird thing is that they play fine on a PC.
I have tried updating my Quicktime (I am running Leopard), and that did nothing.
Any ideas?

How can I tell that. I have several. I am also unable to view them in the finder window like I can other .m4v or .mov files.

Sharing of mp4 files not allowed

Just wondering, if in the near future Adobe CC will allow to share mp4 files, currently our clients ask for the h264 format all the time.
Is there a reazon why the mp4 format is not working with CC?

The official (idiotic) explanation is that video files are frequently used for piracy and Adobe is afraid subscribers to CC will use it to share copyrighted material without permission.

Finder moving files not copying

I have been using a mac for over 15 years but this one has me stumped.
When coping files I have always held down 'option' to copy the file. A small green plus symbol appears and the files then copy into the target folder, or hard drive.
I have a Mac Pro, with the latest updates of Yosemite .... but now the files are moving and NOT copying.
So when I back something up, they are no longer in the original location, only where i have copyied them to. They disappear.
Should I be using cut and paste instead? Anyone else have this problem?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Download and re-install the 10.10.1 update.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Very big iMovie project file

Here is what I do. I record a movie with Miglia Eyetv and a Mac Mini, setting Apple Imovie, it is ---.mp4 format. The file is about 1,7 gig. Next I want to remove begin and end, commercials and add some chapters. So I import the movie file into iMovie. After doing the simple editing stuff I end up with a project file about 26 gig (!?). Then I want to share it with iDVD to burn a disk. The disk space that is required is about 7 gig. It is to big for a single layer disk.
The editing work is done on my new iMac. I think I have enough power under the hood to do this kind of work.
Then, I life in Europe, so my records are in PAL. Each time I create an iMovie project its is set in NTSC. I cannot change anything; Preferences doesn't show any option. Importing the mp4 file takes considerable time, probably because the recoding PAL to NTSC.
In short, I want to burn (a standard, 2 hour, movie) on a single layer disk, with normal quality. Then I don't want to hustle withe the PAL - NTSC thing.

You can set the PAL vs NTSC when you create a project. However, if for some reason you cannot, you can export the movie as QuickTime and convert it. You can wait until you have completely finished the movie and then convert it, or you can export it at the beginning when you have just a couple of clips in the movie, and then you can continue to add to your movie and edit it.
See this from iMovie help:
+Exporting your movie for viewing in PAL or NTSC format+
+When you first create a new project in iMovie HD, you can select a video format for the project. The video and images you later add to the iMovie are converted to this format. However, if you need to format your movie to be viewed on a VCR or DVD player that uses another format, you can use the expert export options to convert your movie.+
+NTSC is a format commonly used in North America and Japan. PAL is a format commonly used by devices in Europe. There are also different versions of these two formats, such as DVCPRO-PAL and DVCPRO50-NTSC, so determine the precise format you need before exporting.+
+To export a movie in NTSC or PAL format:+
+Choose Share > QuickTime.+
+Choose Expert Settings from the "Compress movie for" pop-up menu, and then click Share.+
+Type a name for your movie and choose where you want to save it.+
+Choose "Movie to QuickTime Movie" from the Export pop-up menu, and then click Options.+
+In the Video pane, click Settings to open the Compression Settings dialog.+
+Choose a format from the pop-up menu (DV-PAL or DVCPRO-PAL for Europe, DV-NTSC or DVCPRO-NTSC for North America and Japan).+
+Choose a value from the Frames Rate pop-up menu (25 for PAL and 29.97 for NTSC)+
+Drag the Quality slider to the desired quality. Best is recommended.+
+Click OK.+
+Click Size to open the Export Size Settings dialog, and then click "Use custom size."+
+Type a value in the Width field (720 for both PAL and NTSC) and in the Height field (576 for PAL and 480 for NTSC), and then click OK.+
+Click Settings in the Sound pane.+
+Choose Stereo (L R) from the Channels pop-up menu in the Sound Settings dialog.+
+Choose 48.000 from the kHz pop-up menu (or type it in the Rate field).+
+Choose 16 from the "Sample size" pop-up menu, and then click OK.+
+Click OK in the Movie Settings dialog.+
+Click Save.+

Saplogon.ini services files NOT copying over durring PACKAGE INSTALL

I have an server sdmin install that ive put together and created a package. its fully patched server. In the scripts area ive placed the script that was in the chm file to copy over a private logon.ini and services file in the "ON END INSTALL" section of the package..
The issue is that it does not copy over the files that are listed in the customerfiles folder that I have.
the user on the machines have admin rights to the machine so I dont think its a rights issue. any idea out there for me ?
this is SAG gui 7.10 patch 2.

Hi
This is the script I use when deploying a package.
ON END INSTALL
NwEngine.Context.Log.Write "Event: Copying customized saplogon.ini"
If NwEngine.Shell.FileExist("%SAPSrcDir%\ConfigurationFiles\saplogon.ini") Then
NwEngine.Shell.CopyFile "%SAPSrcDir%\ConfigurationFiles\saplogon.ini", "%WinDir%\saplogon.ini"
End If
Basically I have installed my SAP installation server to a share SAPINST$ the \ConfigurationFiles\ folder is within the SAPSrcDir (SAPINST$\ConfigurationFiles\).
Hope this helps?
Stu

.mp4 file not opening in safari

Hi all. Got a problem. I have posted an mp4 file on my website and for some reason when i go to the link, it opens up with millions of numbers,text and crazy stuff. However on other browsers, it plays fine. Any thoughts? Thanks in advance, Matty

I have posted an mp4 file on my website and for some reason when i go to the link, it opens up with millions of numbers,text and crazy stuff. However on other browsers, it plays fine. Any thoughts?If you have QT Pro, you could try using the "Save As..." option to place you file into an MOV file container before uploading to your web site. If you are using direct URL access of the file, consider embedding your refeences/play instructions.

Very Big Videora MP4 File not copying to iTunes

Similar Messages

Maybe you are looking for