Very bottom of iPod touch 4g does not work correctly.

I have tried, resetting it, turning it on and off of course. Nothing appears to be working, but the odd thing is, I can slide it to unlock easy enough, and the bottom tabs on the home page work fine, but the bottom part in Saffari or any other tab/app, will not work, for example: I cannot type: "." "space" "123" or any of those, which gets really frustrating, I was just wondering if there is a way to sort this, as I have seen that it is a very popular error among the iPod touch's. Any help would be greatly appreciated. Thank you.

- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.
-  Make an appointment at the Genius Bar of an Apple store since it now appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

    The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

    Apple will exchange your Pod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like this one is less expensive.  Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I dropped my phone and the very bottom of the touch screen does not respond. would i need to get the screen replaced or is there another way?

    I've dropped my phone quite often, and the back of the phone is cracked, but I haven't bothered to fix it. I dropped my phone again today, and a tiny bit chipped off near the top edge of my phone. Later when i got home, I couldn't unlock my phone except when I slid my finger across the very top of the arrow and it JUST opened. but I can't use the bottom now, so on the keyboard, I can't type with the space bar and anything else at the very bottom of the touch screen.

    At Apple Store for $149 you can get a replacement iPhone 4 which will be just like New. Everything will work perfect and the there will be no chips or cracks. New battery and buttons too. Make Genius Reservation and take iPhone to Apple.

  • Brand new ipod Touch (8GB) does not work with DHCP

    I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

    its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • IPod touch 2G does't work with Kenwood car radio anymore

    Hi
    since a few days ago, my iPod touch 2G does not work anymore with my car radio Kenwood KDC-W4544U.
    When i connect the iPod to the radio, the radio display shows "Reading", which it normally shows for like 5 seconds. But now the "Reading" lasts forever, after 10 minutes of trying to let my radio read the iPod, i have no other possibility but listen to CD or radio...
    I have already shut down and restarted the iPod, synched it, even restored it via iTunes. I also tried three different connection cables.
    Is this a known problem and is there maybe a solution?
    Thanks in advance for an answer

    Problem could be solved by hard-resetting the radio

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My ipod touch 4g does not show in Windows 7 or itunes.  I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables.  Ipod is charging when connected.  I've also done a complete rollback to factory defaults.

    My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes.  I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

    Did you remove and reinstall all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to see if it helps determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem'
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • I have a problem with my ipod touch it does not light at all, what should I do?

    I have a problem with my ipod touch it does not light at all, what should I do?

    Try the troubleshooting here for your specific symptom:
    iPod touch: Hardware troubleshooting

  • IPod Touch (4) does not automatically fetch email

    My iPod Touch 4 does not fetch email unless I force it to. Push is off and my mail accounts are all working (MobileMe & Gmail).
    I've tried everything and the device just sits there, even though it is set to fetch new emails every 15 minutes.
    Any idea why? Also, does auto-lock interfere with fetch?
    Cheers!
    Doug
    San Cristobal de las Casas, Mexico

    I believe you need to have "Push" turned on. Try that and see what happens

  • My ipod touch 4g does not appear in itunes when connected

    My ipod touch 4g does not appear in itunes when connected

    See the suggestions in this article.
    http://support.apple.com/kb/TS1538
    B-rock

  • When I enter an appt on my ipod touch it does not sync back to ical. Only those appts I enter on ical sync to my ipod touch. Anyone have a remedy for this?

    When I enter an appt on my ipod touch it does not sync back to ical. Only those appts I enter on ical sync to my ipod touch. Anyone have a remedy for this?

    You buy one and only one download.
    As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
    http://www.apple.com/support/itunes

  • My ipod touch 4g does not want to complete the restore process

    alright my ipod touch 4g does not want to complete the restore process like it does go through but at the last min, it doesnt want to complete i left it there untouch for 2-3 hours and still hasnt complete it . i tried almost anything i can think of. any help ?

    If you look at the status bar at the top of iTunes, what stage does the restore stop at?

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6

    My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6. The screen is black and it doesn't work.

    Downgrading the iOS is not supported by Apple.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

Maybe you are looking for

  • Purchase Order Release Help

    Dear friends, My question is about PO approval strategy. I add a new field to CEKKO (ERNAM - name of person who created the object) and create a characteristic (Z_ERNAM) that referrers to CEKKO-ERNAM. Then assign this characteristic to PO release cla

  • How do I display the DRM Metadata in a human-readable format?

    1. Ensure you're working with a metadata binary - if you extracted the DRM metadata out of an HDS or HLS manifest (.f4m or .m3u8), you will have to base64-decode the string into a metadata binary. 2. Run this following Java command line tool, which i

  • Java NIO's puzzle

    hi,all In traditonal thread-pool based programming way,the Server can process multi-clients by thread(time-sharing),all clients's time is equal. In Java NIO programming way,the [select] will process multi-clients without thread pool.So,the the second

  • Solution manager "Maintenance Optimizer" System Logical Component

    Hello friends! I have some troubles with my Solution Manager! After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction. Steps for reconstructions: 1) start tcode SOLUTION_MANAGER 2) select my solution from list (the same like i

  • How to tie ICF_NODE to path in SICF

    Hello, Is there a way to tie the 25 character ICF_NODE to the SICF path?  We are starting to use web services more and more and would like to secure the S_ICF_ADM node to the specific host/service.  When we run ST01 traces, we get the technical name