VERY cool site - how do you think they did this?
http://jacksonpollock.org/
hi,
its done with flash actionscript using the drawing api. visit
www.kirupa.com or www.gotoandlearn.com and they have a tutorial for
it.
gaurav
Similar Messages
-
My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S
My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S
-
Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneralHere's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand. -
My iphone 5 power button does not respond do you think they will exchange it for a new one?
help do you think they will exchannge it?
For the second time: Take it in for evaluation. Maybe they will: maybe they wont replace it. Only they can determine that after examining the phone. Endless redudant and circular questions will NOT solve your problem.
-
I just opened an email from someone I knew via Insight Broadband. It was a link. I clicked on it and it led to a enhancement drug web site. Do you think I downloaded a virus? I didn't buy any anti-virus software. Thanks to anyone who has time to help me.
Hello:
There are NO viruses that affect a Mac running OS X - none. FWIW, I suggest that you NOT buy A/V software. It is a waste of both money and computer resources.
Having said that, there are a couple of instances of malware that have popped up. Just don't follow links from unknown sources.
Barry -
I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck. -
i got ipod in a public toilet but no one is there to ask who owns it. it has passcode so i cant access her/his info. so i decided to keep it and want to use it. i want to reset the passcode so that i can change the settings. do you think they can track it and know whos using it?
Hand it to the police and if nobody claims it maybe they will let you have it. The person who loss it will be grateful.
-
Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life. -
RoboHelp 11
When previewing topics from within the project, a script error diplays: 'HHComponent Activator' is undefined.
How do you get rid of this script error?Hi there
Have you tried clicking Help > Updates and applying the service release?
If not, I'd start with that.
Cheers... Rick -
Any idea how they did this??
Hey guys check this out, does anyone have any idea how they did this http://www.adidas.com/campaigns/styleessentials2010/content/Default.aspx?headerType=discre et&strCountry_adidascom=us#/journey
I would like to emulate this technique if I can.that's masking with dynamically created movieclips (or sprites) and some additional dynamically created objects.
-
I lost my ipod nano,how can you help me on this?
i lost my ipod nano,how can you help me on this?
Unfortunately, there is no way to track or locate it. Report the missing item to your local authorities.
Reporting a lost or stolen Apple product
B-rock -
I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software. When I go to update my software, it's telling me I'm running the latest version??? HELP!!
you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to run Iphone 5
-
How would you go about doing this? (some broken links)
Okaaaayy,
Let's say every link in your document has broken and you now have to go back into it and relink everything before print time tomorrow...
Sure, no problem, but why did it happen.
I know that if you rename a file or folder or move a linked image file out of it's original location, the link in Indesign gets broken, but what about surrounding/encompassing folders? Seems kinda weird.. but to provide an example I included a picture of how I have the uber-structure set up.
What I actually did was rename (I think I did.) the "UBER"-folder's name
"Prepress guide pages/ image links"
What's inside of that folder is another folder for each page in the document with another separate folder for 'linked images'.
MUSTA BEEN A BAD MOVE TO NENAME 'PREPRESS GUIDE IMAGE LINKS' BECAUSE ALL LINKS ARE BUSTED NOW.
frikkin' indesign.
Honestly, I never changed names or moved anything else, in fact..
I spent most of my time organizing what you see on the picture here..
minus the details... lol
http://i14.photobucket.com/albums/a349/coffeyville1975/Picture4-4.pngYou changed the name of a folder containing your links. InDesign is
still looking for the old folder name and won't go any further until it
finds it.
You really have a bit to learn about proper workflow but you'll get
there. These types of mistakes are the kind that you usually only make
once and learn from.
One more piece of advice...lose the slashes in file names. They're not
cross platform and you won't always be working in a vacuum.
Bob -
Disable the pop-up message box "How would you like to open this file" to open pdf file??
Hi,
is there any way i can stop the pop-up box displaying to open pdf file in sharepoint document library? Right now whenever i am trying to open pdf file, asking "how would you like to open" Read only or edit mode. currently MIME Type is setup
but still pop-up message box.
Thanks in advanced!Hi ,
As far as I know, This is a default feature. and is not recommended to delete or deactivate this pop up.
This is a feature of office and there is a dll called owssupp.dll which is responsible for getting the popup to open.
You can go to IE tools> addon settings and deactivate the above dll (sharepoint open document class). But if you do so, then the other office office files which are word/excel/pptx etc.. would aslo gets affected and they also wont get the popup.
Hope this helps.
Best Regards, Ashok Yadala -
How do you guys work around this trivial situation?
Hi,
I'm using GlassFish v2 and JSF 1.2.
Since JSP can be run using the direct url of the JSP page and the JSF pages require some prefix like "/faces/" how do you guys deal with situations
when somebody accesses the direct link of the JSF (that means without typing "faces/") ? - I noticed that GlassFish throws an error in this case which must be addressed I think.
Any hint or constructive comment would be highly appreciated. Or is this an open problem when using JSF?Well thank you a lot, I did more googling before finding your second reply and found some info about filters, I will check your links as well and
see if I can polish my solution based on your links.
For those who might look for solving the same issue:
I added to web.xml this (my faces are prefixed with "/fx" rather than "/faces", a matter of taste):
<filter>
<filter-name>JsfFilter</filter-name>
<filter-class>xlinuks.JsfFilter</filter-class>
<init-param>
<param-name>search_token</param-name>
<param-value>.jsp</param-value>
</init-param>
<init-param>
<param-name>add_token</param-name>
<param-value>/fx</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>JsfFilter</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>And the filter itself is this:
package xlinuks;
import java.io.IOException;
import javax.servlet.*;
import javax.servlet.http.*;
public class JsfFilter implements Filter {
private FilterConfig filterConfig;
private String sSearchToken, sAddToken;
public void doFilter( ServletRequest request, ServletResponse response, FilterChain chain ) throws ServletException, IOException {
HttpServletRequest httpReq = (HttpServletRequest) request;
String sUri = httpReq.getRequestURI();
if( (sAddToken == null) || (sSearchToken == null) ) {
chain.doFilter( request, response );
return;
int iIndex = sUri.indexOf( sSearchToken );
if( (iIndex > -1) && (sUri.indexOf( sAddToken ) < 0) ) {
sUri = sAddToken + sUri.substring( sUri.lastIndexOf( "/" ) );
filterConfig.getServletContext().getRequestDispatcher(sUri).forward(request, response);
return;
} else {
chain.doFilter(request, response);
public void init(FilterConfig filterConfig) throws ServletException {
this.filterConfig = filterConfig;
sSearchToken = filterConfig.getInitParameter( "search_token" );
sAddToken = filterConfig.getInitParameter( "add_token" );
public void destroy() {
filterConfig = null;
}
Maybe you are looking for
-
How to use ZMATERIAL info object attribute in existing report
Hi all, Using generic extraction we have created data source related that data source we have created navigational attribute for info object ZMATERIAL. Data available for ZMATERIAL info objects. Now ZMATERIAL info object related navigational
-
I just installed Aperture on my Macbook Air, and spent quite a bit of time editing, deleting, and re-dating photos. Now I want to move the entire library, just as it is, to my existing iMac. How do I do that? Also, after I do that, I'll want to mak
-
After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all. Can someone tell me how to correct this problem?
-
HT1657 how can I watch a movie on my apple tv that i rented on my mac mini?
Anybody? They're otherwise shared nicely with functionality with the ipad and ipods as remotes. Library synced. Just this flippin movie issue...
-
Ok, so I created a form in Livecycle Designer, and I made it so that when a certain option is selected from the drop down box, new form fields will automatically pop up. First off, there is one box that takes a few seconds to pop up when the selectio