Very Critical....Barcode Configuration..Plz Help....

Hi SAP Gurus....
Could you all plz help me to map in SAP..MM..Its very critical need to provide solution to my client ASAP
1.     Client procures two types of products from ABC Dubai namely, A and B products.
2.     The products under warranty are being tracked using Barcodes.
The barcodes are generated at the client place with the Purchase Order and sent to the Vendor by Post or through E-mail.
3.     Barcodes have to be printed in the case of Post, or converted into .PRN file in the case of an E-mail
4.     These barcodes are then pasted on the products as required and shipped back to the Client.
5.     Barcode used currently is EAN 14, code 128.
6.     Client has different Handling Units (HU), like Outer, Inners (smaller carton inside Master carton), and items inside Inner carton. All the three HU has different barcode series. Inners have Master carton number of Pieces have respective Inner carton numbers.
7.     At the time of GR, Masters are scanned, and details up to pieces are collected into system automatically.
8.     All goods movement happens then with barcodes.
Could you all plz tell me how to create the below details....respective of above requirements....
u2022     Question - -
      How to Create Barcodes
Edited by: shrii on May 22, 2009 9:31 AM

Map the procurement with inbound delivery so that handling units will be captured and barcodes can be sent to the vendor with the help of data from inbound delivery. For barcode printing, follow: http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope, this will help you.
Regards,
Sudhir Dahake

Similar Messages

TS2326 my ios is 5.1.1 but still im facing to this issue, this is very annoying... plz help me

my ios is 5.1.1 but still im facing to this issue, this is very annoying... plz help me

You need to tell us what "this issue" is if you want help.

Free goods configuration, plz help

Pl help for this scenerio:
1) Sales order - Material A - Qty 23
    Free Goods - Material B - Qty 3 Nos and Material C - Qty 1 No
    There is a scale also.
2) Sales order - Material A and Material B - combined qty - 30 Nos
    Free Goods - Material C - Qty 4 Nos
    There is a scale also.
Arshad

Hi
Not possible in R3 sir
Certainly possible through bonus buy in IS RETAIL
Constraints in R3
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
This is taken SAP library
Regards
Raja
Edited by: ramanathan raja on Dec 4, 2008 3:00 PM

What is the Differences between Caingorm2 and Parsley(Caingorm3) ? Very Urgent ...plz help me out..

Hi all,
I am familier with caingorm 2 , and i am new to parsley , can any one give differences between caingorm2 and parsley(caingorm3) ?
and also please
1)how to create a BeanConfig.mxml configuration file in parsly ? how many ways we can inject beans in BeanConfig.mxml
2)and how the event dispatched in parsly and handled by parsley step-by step?
3)please explain by taking a small example insert usename and password in to data base using LCDS ?
thanks
-Balu

Hi
You can refer the following links for your question.
Difference between AET and EEWB
What is the use of AET? What are the differences between AET and EEWB?
Difference between EEWB - UI Configuration Tool - AET
http://senthilsapcrm.wordpress.com/2010/02/04/adding-custom-fields-in-sap-crm-7-0-using-aet/
What is the main difference between eewb and aet tool ?
Hope it is useful.
Thanks and regards
Preeti Viswanath

Ma iphone 3g is very bad with application plz help me :"(

hi all
ma iphone is 3g ( 4.0) i mad unlock and jalebreak to it and now many times crashed from application like photos, mails, safary, many games
what i can solve this problem ?????

ahaaa
i mad jalebreake and unlock becoz i traveled to another city now and ma iphone was locked on my city is this illegal or what ???

Error while opening a module. plz help me, very urgent.

when i try to open a module, the following error message appears on my screen.
          " no j2ee component found in d:\krisp\programs\servlets".
          i've installed bea in c: drive and my servlet program is in d: drive.
          plz help me, it's very urgent.

Can you provide some more information? What were you doing when this happened?
          Can you post the entire error message?
          -- Rob
          WLS Blog http://dev2dev.bea.com/blog/rwoollen/

How to write code for this logic, plz help me very urgent

Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char      are   belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
                                    s_hkont for bseg-hkont,
                                     s_budat for bkpf-budat,
                                     s_processed for zfibue-processed,
                                      s_processedon for zfibue-processedon,
                                      s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
                  p_chk2 as checkbox.
                  p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
          Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
          IF sy-subrc = 0.
                 Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
              Modify Table GT_ZFIBUE. Update Product Hierarchy
             Endif.
    Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
    Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
          IF sy-subrc = 0.
                 Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
              Move X to GT_ZFIBUE-MAPPED.
              Modify Table GT_ZFIBUE.
             Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
   Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
                          LWA_ FIELDCAT -DATATYPE = NUMC.
                          LWA_ FIELDCAT -OUTPUTLEN = 9.
                          LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                          LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
          Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
         b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
         c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
                                                           rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1.     If r_ucomm = SAVE, continue. Else exit.
2.     Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a.     IF GT_ZFIBUE-PROCESSED = X.
i.     GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii.     GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Plz help me TEXTPOOL PROBLEM(VERY URGENT)

hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.

Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane.

Plz help me to design the system......Its very urgent

Hi all members
I have a problem and i am not able to start with the solution of this
if all of u can help me to move with the solution of this problem
I have to send the Java interfaces, and a brief write-up with assumptions and class-design.
Challenge
Your challenge is to begin development of a back-end system for the Galactic Census.
You will be designing and implementing a Java API;
you will not be building the user interface.
The specifications have been written on a stack of white index cards.
Each card has a title at the top and a few sentences describing what is desired.
Your customer, the Galactic Government,
has also communicated to you some idea of the value of each card.
Card Title Description Value
Person Data Entry Several persons may be entered into the system.
Each person has a full name, date of birth, planet of residence,
local address (on that planet), and annual income.
Being able to enter this data is critical to the Census.
Person Data Report All the person data in the system may be retrieved at once.
The data should be grouped by planet,
and ordered alphabetically by full name within each planet.
This report will be needed in the future,
but is less immediately valuable than the various statistics.
Statistic: Galactic Total The total number of persons in the Galaxy may be retrieved
from the system. This statistic is one of the primary goals of the Census.
Statistic: Planetary Total The total number of persons on any given planet
may be retrieved from the system.
This statistic is one of the primary goals of the Census.
Statistic: Galactic Per Capita Income The average income per person in the
Galaxy may be retrieved from the system.
This statistic is required by Government economists.
Statistic: Planetary Per Capita Income The average income per person on
any given planet may be retrieved from the system.
Some university researchers have asked for this statistic.
plz help me to start with this problem
Thanks

plz help me to start with this problemRead the problem description and make a class design based on which class needs to do what. Take these "white cards" as basis. Think about the services your system has to offer. Make interfaces for those.

Experts plz help its very urgent

hi expert
plz help- me
previously i was getting dump in this statement
TRANSFER v_tab TO p_file.
FYI:
here v_tab is a table which hav som records
and p_file contains the path of a file like c:\new\ggg.txt
DATA: v_tab TYPE STANDARD TABLE OF t_line WITH HEADER LINE,
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
END OF t_line.
DUMP I WAS GETTIN :
For the statement
   "TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
to avoid this dump i used feild symbol
assign V_TAB to <IN> casting.
      p_file = <in>.
      unassign <IN>.
nw there is no dump
but problem is p_file contains the contents of v_tab not the file path .
plz help me its very urgent
thanx in advance

Hey, no probs,
after your initial declaration, do this.
TYPES: BEGIN OF n_line,
pspid(9) TYPE c,
tab1(15) TYPE c,        "check the length you want
post1 TYPE proj-post1,
tab2(15) TYPE c,         "check the length you want
vernr TYPE prps-vernr,
tab3(15) TYPE c,         "check the length you want
END OF t_line.
DATA: n_tab TYPE STANDARD TABLE OF n_line WITH HEADER LINE.
now after you fetch data into v_tab,
move it to n_tab.
using a loop at v_tab and move corresponding fields to n_tab's work area
append to n_tab.
once you have populated n_tab and are ready to TRANSFER.
OPEN your file using
open dataset <file> for output in text mode encoding default.
now
loop at n_tab.
TRANSFER n_tab to p_file.
endloop.
CLOSE DATASET.

Plz Help me.Very urgent

Hi Frds,
When i am creating generic data source for master data table KNKK, getting following error : Invalid extract structure template KNKK of data source ZRF_KNKK_CRDMNGT. why I am getting error?
In the table/view entered KNKK. may be this is wrong. So i have to create View compulsory to master data generic data source.
Plz Help me . Very urgent

Hi,
Check your table knkk...does that table have any currency or weight units?
if it have any of the above units then those units might be referring to some
fields.
Currency and weight unit fields should always refer to fields in its own table.
In your case,it should refer to some field in KKNK table.
If your currency or weight field is referring to some other table then while
creating the datasource you will get the error mentioned by you.
Regards,
Senoy

Jaxrpc compilation exception(plz Help very Urgent Plz)

Hello there....
while deploying a simple webservice using deploytool i m getting this error while the application that is being deployed is not even using ejbs....
i m trying to compile the example given on the forum by Qusay H. Mahmoud, so plz help me to get out from this......
Thank u ....alll
distribute: C:\Sun\AppServer\apps\Add.war
deployment started : 0%
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
!!! Operation Failed !!!
!!! With The Following Failure Messages !!!
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
[Completed (time=24.0sec, status=13)]
**********************************************************************

I had a similar problem with Sun App Server.If you can check the domain/log/Server.log.It explains a valid endpoint address is missing in the deployment.To do this open the deployment tool and click the Implementation class in the tree(Bean Shaped).
You can see a endpoint tab within which you need to configure the Endpoint address.
The deployment went fine after this.
Good Luck !!!

My ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

my ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

3.5.x will be supported until August.
http://www.mozilla.com/en-US/firefox/all-older.html
Also see: [[Installing a previous version of Firefox]] and [[Installing Firefox]]
If you want to troubleshoot your problems with Firefox 3.6.x you can start with [[Firefox hangs]]. Start basic troubleshooting with [[Safe Mode]].

Plz help?????????/tell me e-book of recovery manager. its very urgent

plz help?????????/tell me e-book of recovery manager. its very urgent
its very urgent

Satyaki De was asking how to get the ¿ character. I never said it was how you managed to get it. :))
Satyaki, I have windows Vista on my laptop. It's very pretty but does little more than windows XP as far as interface goes.
;)

Plz help me on this very simple error

hello everybody...i'm very new to java programming...i'm unable to execute my program though it has been compiled...my coding is something like this and is very easy>>
class abc
public static void main(String [] args)
System.out.println("hello");
and at the time of execution...this error is shown up>>
C:\Documents and Settings\Ishan\Desktop>java abc
Exception in thread "main" java.lang.NoClassDefFoundError: abc
Caused by: java.lang.ClassNotFoundException: abc
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: abc. Program will exit.
plz help me on this. thanks.

Follow the instructions in this tutorial:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html
See problem solutions here:
http://java.sun.com/docs/books/tutorial/getStarted/problems/index.html

Very Critical....Barcode Configuration..Plz Help....

Similar Messages

Maybe you are looking for