VERY dissapointed by lack of Mac support

Hi,
well I've read a lot of posts on the web now about this and they all say the same thing: Why doesn't Creative make Mac drivers? And I've yet to see a reply! I've bought a Vista IM and of course it won't work on my iMac G5. I think this will put me off buying anything from Creative again.
Theo
UK

Same here. I looked all over for a mac-compatible USB webcam, and found very little support out there. Macam is good, but due to Creative's lack of support (which amounts to simply giving the Macam people documentation, takes practically no effort on Creative's part) none of their recent webcams are supported. I went with a competitor for a couple of webcams instead, including the Philips SPC900NC (works well with Macam).
If Creative can't be bothered to support Macs, the least they could do is have some open dialog with the Macam people or send them a bit of documentation. But as it stands, Mac users will simply have to ignore creative.

Similar Messages

Lack of Mac Support Disappointments

I was very disappointed that the iPhone doesn't allow a Mac (MacBook Pro in my case) to use it's EDGE internet connection via Bluetooth. I would like to be able to use the iPhone's internet connection for my MacBook Pro when there's no WiFi available.
Also, Bluetooth dialing support and SMS Messages in MacOS X's Address Book application isn't supported as well. This is really bad when other cell phones provide more integrated support for features in MacOS X than the iPhone.
PowerMac G5 2.7GHz DP Mac OS X (10.4.10) thawte Web Of Trust Notary

On the first point, I completely agree. Why the iPhone folks decided not to allow it to become a hotspot is beyond me - other than the low bandwidth, and resulting poor impressions from average users. I would like to be able to sign something that says "I UNDERSTAND WHAT I AM DOING THANKS" and have access to things like this that might displease "average" folks.
On the second point, I don't think I agree. The iPhone has its own screen - the address book is duplicated. I don't see any reason to use the Mac address book to deal with the phone, when the phone can display everything the machine can....

VERY DISSAPOINTED at the lack of accessori

Very, very, very dissapointed at the complete lack of accessories for the Creative line. I own a creative micro photo 8 gb which I purchased two days ago. I started out with the Sleek photo, but was very dissapointed in the sound quality. I used 4 different set's of headphones, and they all sounded like garbage. I exchanged it for the creative zen microphoto, and what a world of difference in sound quality, using those same headphones I had used before.
Now, I want to listen in my car. The creative site advertises the belkin tunecast fm transmitter. The store I bought it from had it, so i bought it too. This too, was a dissapointment, as 88. was a dead station in my area and my sirius unit broadcasts crystal clear to this station. With my sirius unit off, and unplugged, i attached the belkin tunecast to the creative and heard a lot of static and garbage. I didn't matter where I moved the tunecast and the player too, it was not clear, had a lot of static, and was again, another dissapointment.
I guess I'm done with creative. Sadly, I love the X-fi line of sound cards, as I have the the extreme music version. However, the lack of support for any sort of car dock, to hardwire the player into the stereo, or any sort of decent fm transmitter that fits on the creative player (like the i trip) is going to make me *dry heaves* buy an IPOD.
I REALLY like the player itself. I am dissapointed that none of the creative accessories (what few there are) were carried in ANY retail store. Wal-mart, Best Buy, Circuit city, none of those had ANYTHING. No cases, no speakers, nothing. Come on Creative, get it together. You came halfway and made a great player, now follow through and offer supporting accessories. -
Someone, please enlighten me as to other resources I can use to hardware my player, or at least a decent fm transmitter.

JK23 no offense, but I am not lugging around a huge set of speakers that requires AC Power. What I am referring too is a powered speaker system that has a built in dock. One simple piece of equipment that I can stick in a suit case that requires no AC power, but runs on batteries. Yeah I know about the travel speakers and I also could go out and buy a boombox that has an aux-input. But guess what JK, if I had an iPod I wouldn't have to do either of those because there are dozens of companies that make power speakers systems with a built in dock. Creative made a nice one for the Zen Micro, but you'd think with the ZV:M being their Cadillac they would have been smart enough to realize they needed to make one for it.
The fact is there is no powered speaker system with dock for the ZV:M because creative doesn't make one and apparently no one else in the industry has any incenti've to do so. I won't except excuses and I darn sure won't make any for them, nor will I suggest that someone buy something else, when clearly that isn't what they want.
I could buy a set of computer speakers anywhere, but that isn't what I want and if I had an iPod that isn't what I'd have to settle for, so I hope this clears that up. I know I am being rather blunt, so don't get offended, just setting the record straight.

Lack of Mac & Linux Support Hurting Javafx 2.0 Early Adoption and traction.

Lack of Mac & Linux Support Hurting Javafx 2.0 Early Adoption and traction.
Oracle needs to come out with a Mac & Linux Beta built, or let developers know the real story behind Mac OS and Javafx 2.0.

I too would like to at least be able to try the Mac/Linux ports, even knowing that they are behind the Windows version. But just knowing that Oracle is committed to them is enough to ease any nervous feeling that I'm choosing the wrong tech.
I have no problems with the fact that Oracle is concentrating on Windows first. It makes sense. If you have to pick one platform to focus on while you are getting the kinks out, it makes sense for it to be the most popular platform. That's Windows. But there mustn't be too long of a wait for the others. (E.g. if they were in a public beta stage when the Windows version is at final release, that would help boost confidence in the platform.)
So long as they don't make the same mistakes that were made with Swing, where there are too many assumptions that all platforms work the same - so things like Mac's screen menu bar had to be fit in after the fact by Apple using awkward hacks. (I notice that now even popular Linux distros (Ubuntu) are using the screen menu bar concept, though they have managed to fit that into the window manager in such a way that it didn't seem to cause much problems.)

Lack of Migration support for 6.0 & 10g users

Hi,
One of the 1st things we wanted to do with the beta as an existing customer is to validate migrating a project from our existing Production version (6.0) to 11g.
While the import appears to work, opening any imported diagram throws an XML parsing exception.
After raising an SR, it turns out that migrating from previous versions is unsupported until 11gR2.
This puts me in a tricky spot as one of the main business drivers to adopt 11g is product upgrade.
I am very surprised to see existing customers nt being catered for in the new version, as running multiple versions in Prod is not a realistic option for most.
Backwards compatability is therefore very important to the existing user base!
So, questions for Oracle:
1. Can you please reconsider the lack of migration support for R1?
2. if this feature cannot be working for R1, what is the expected release date (even if its just a quarter) for R2?
3. To save my time, is there a list of what other features are not for going to be available in the Beta / R1 release?
As a Beta tester my time is precious, and I need to know what I can expect to work, rather than report issues only to then find out that its not supported...
Thanks,
Ian
.

Hi Ian,
You are right in the sense that upgrade will be supported in BPM 11gR2. More specifically, the upgrade will support OBPM 10gR3 to BPM 11gR2. Customers in older versions of OBPM and ALBPM will need to upgrade to OBPM 10gR3 before attempting the upgrade to BPM 11gR2. To upgrade to OBPM 10gR3, there are a series of pointers in our documentation on how to do this. I can explicitly provide links if you are interested in this mandatory upgrade before moving to BPM 11g.
As per the reason for not being able to support upgrade in this first version of BPM 11g, it simply boils down to time to create the new unified BPM platform which in itself is a major undertake from an Engineering perspective. Once the foundation is complete (this is the objective for BPM 11gR1), we will start working on completing the delta to upgrade OBPM 10gR3 projects to BPM 11gR2 as best as possible. There is a document we have been sharing with customers with Best Practices for implementing OBPM 10gR3 projects with idea of an upgrade to BPM 11g. We do have significant knowledge on some pieces that we will be able to automate from a migration perspective and some others that will be hard to upgrade. If you are interested in this document, we can provide this to you.
If you have any other questions, please let me know. I would be more than happy to assist with migration questions with the most up to date knowledge I have on this front.
Regards,
eduardoc.

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or Flash which are platforms needed to do online business banking. I am now faced with ditching it and replacing it with a competitors product

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or flash which are platforms needed to do online business banking. I am now faced with ditching an expensive toy for a competitors product that offers full business functionallity. Is there any way round this ? It seems extremely bad form on apples part not to support this or make it very clear of the products limitations at the time of purchase.

Well, my bank has an app but the website does not use Flash or Java. While my credit union doesn't have an app, their website doesn't require Flash or Java either.
I pay all my bills online, bank, and access my brokerage accounts. None of the sites I have encountered require Flash or Java. Some government sites do require Flash so I use Photon, it's a browser that does Flash content very well. So you might check out some alternatives browsers.
Otherwise I suppose you will either dump you bank, your iPad, or just not do online banking.

Very Dissapointed with Creative Customer Supp

Well, here's my correspondence with Creative Support , and let me say I am very dissatisfied with this level of support...My initial email I thought clearly spelled out the issue --
>>Detailed Problem Description:>>In the process of updating my firmware on my>>Nomad Jukebox Zen Xtra to 2.0.03, the firmware>>update failed and the device was no longer>>recognized by Windows. When the Zen rebooted,>>it showed "Firmware Problem" and booted to a>>recovery mode. After trying to reload the>>firmware from recovery mode, the device rebooted>>again several times, and now will not power on>>at all. I have tried resetting the device via>>the reset button on the side and still will not>>power up. Thanks>>>>=======================
That was my initial email to customer support...and they respond with:
>>Dear JAy>>>>Thank you for contacting Creative Labs technical support department.>>>>Creative Labs is a leader in sound systems, portable devices, Mp3>>players, and audio performance. (Nice blab of adversting :smileyindifferent: )> >>>If you would like to view any of our products, or view our knowledge>>base system with helpful troubleshooting tips and driver downloads,>>please visit us.creative.com.>>>>We want to fully assist you in the best way possible, so please bear>>with us as we help you solve any technical issues.>>>>I understand you are having problems with your zen.>>>>It is recommended that you download and install the latest driver as>>well as the firmware update, and then format your player or resetyour>>player by booting the player into its unique Recovery Mode, if you>>experience one or more of the following symptoms:>>>>Your player is not detected in Creative MediaSource or Windows Media>>Player>>The battery does not last as expected>>Your computer stops responding during file transfers>>There is a power outage during file transfers>>There is an error about firmware>>>>. Detach the Zen player from your PC , and ensure that it is turned>>off.>>2. Connect the power supply to the player.>>3. Hold down the Play/Pause button while inserting a paper clip into>the>>Reset hole on your player.>>4. Wait for 4 seconds or so, and then remove the paper clip.>>5. Keep on holding the Play/Pause button till the Rescue Mode screen>>appears.>>6. After the recovery mode has started, release the Play/Pausebutton.>>
<They continue to talk about going through the recovery mode...So after stating I cant turn the power on in my problem description that is what I got...Do they actually even READ your emails? Now my turn to respond...
>Ok - I have tried your recommendation --->>*". Detach the Zen player from your PC , and ensure that it is turned>off.>2. Connect the power supply to the player.>3. Hold down the Play/Pause button while inserting a paper clip intothe>Reset hole on your player.>4. Wait for 4 seconds or so, and then remove the paper clip.>5. Keep on holding the Play/Pause button till the Rescue Mode screen>appears.>6. After the recovery mode has started, release the Play/Pausebutton."*>>And like I stated in my problem description, I have tried severaltimes>to>reset the player, including holding the play/pause button and pressing>the>reset button and the unit no longer powers up at all.
<Makes sense right? The unit no longer powers up...no nothing, nada, zip, zilch, zero... Their response...
Dear Jay,>>Hi, Sorry you are having trouble with your creative product! Regarding>your last email. Looks like you may have a defecti've Creative Labs>product and I would suggest taking back to place of purchase for a>speedy replacement. If you are not able to do this and you have aretail>version and a receipt showing date of purchase then you can send the>product into Creative Labs as long as its still under warranty for an>Return Merchandise Authorization (RMA).>In this case, an RMA service request would be necessary. Please note>that if the product has exceeded its warranty period or there is any>User damage, an out-of-warranty RMA will need to be issued. Thiswould>require the cost of the repairs to be sent with the product when
<They go on explaining the out of warranty and RMA procedures and also have info for me to fill out regarding the getting an RMA....So looks like I may be getting somewhere, at least send my unit back to get fixed right? I respond with the info they request regarding model number purchase date, etc but then follow up with another problem description...
Brief Problem description: In the process of updating my firmware on myNomad Jukebox Zen Xtra to 2.0.03, the firmware update failed and thedevicewas no longer recognized by Windows. When the Zen rebooted, it showed"Firmware Problem" and booted to a recovery mode. After trying toreloadthe firmware from recovery mode, the device rebooted again severaltimes,and now will not power onat all. I have tried resetting the device via the reset button on thesideand still will not power up, and also tried getting back into recoverymodeby holding down play/pause and pressing reset and still no powering up. Thanks
<After I sent that email, this is what I get back to my surprise ----
Dear Jay,Thank you for contacting Creative Technical Support.With regards to the issue, before we proceed with the RMA. I would liketo inform you that as the player has exceed its warranty period, it willnot be covered by warranty. Therefore if the player is deemed out of warranty of the RMA department,the estimated cost of service is around $43.00 - $88.00May I know if you are still willing to send the player to us forservice? If you wish to do so, kindly reply back to us with yourdescision and on receving your reply we would process the RMA. In case if you need any clarification, please do not hesitate to contactus. Thank you. If you still require assistance, please reply to this email with anyprevious correspondence to ensure the quickest and most accurateservice.
<WHOA ---- $88 bucks?!?! I can buy a "new" refurbed unit online for cheaper than that...AND I would get a warranty!! Since they said if I needed clarification or assitance, reply, to which I did:
Let me make sure I understand this... I tried updating my player withyourlatest firmware, and it fried my mp3 player, and now I have to pay up to$88 to fix a problem cause by your software? I just want to make sureIunderstand this issue. Thanks
<Now for the kicker!!! Here is what they say:
<
Dear JayThank you for contacting Creative Labs technical support department.Creative Labs is a leader in sound systems, portable devices, Mp3players, and audio performance. If you would like to view any of our products, or view our knowledgebase system with helpful troubleshooting tips and driver downloads,please visit us.creative.com.We want to fully assist you in the best way possible, so please bearwith us as we help you solve any technical issues. I understand you are having problems with your zen. It is recommended that you download and install the latest driver aswell as the firmware update, and then format your player or reset yourplayer by booting the player into its unique Recovery Mode, if youexperience one or more of the following symptoms:Your player is not detected in Creative MediaSource or Windows MediaPlayerThe battery does not last as expectedYour computer stops responding during file transfersThere is a power outage during file transfersThere is an error about firmware. Detach the Zen player from your PC , and ensure that it is turnedoff.2. Connect the power supply to the player.3. Hold down the Play/Pause button while inserting a paper clip into theReset hole on your player.4. Wait for 4 seconds or so, and then remove the paper clip.5. Keep on holding the Play/Pause button till the Rescue Mode screenappears.6. After the recovery mode has started, release the Play/Pause button.<IT'S THE EXACT SAME EMAIL AS THE FIRST EMAIL THEY SENT BACK!!!!! I responded to that email just a little while ago requesting that a supervisor or manager please contact me... Their support is absolutely HORRENDOUS! I am wondering if these people in "tech support" are technically or are just flowing a flow chart for procedures.
I have been the IT field for 8+ years, I deal with customers on a daily basis. I have never in my life seen this kind of business practice, of A) a company not standing behind their products & work and B) supporting the customers issues after the fact. I understand I am a lowly MP3 owner, but I have always purchased creative products, I've got 2 sound cards running in my pc's here at home. I've purchased speakers, this mp3 player, referred my father in law to purchase a similar mp3 player from creative, bought my brother the same mp3 player. This whole exprience has put a bad taste in my mouth and to see that there are quite a few others are having the same issue makes me sick...
P.S. sorry for being so long winded in this, I know its alot to read, I tried to cut out the non-essential stuff in the emails I posted but I still can't believe my player is junk now after a failed firmware update.

harryhibbs wrote:
A quick question: When you try to reset the unit, is it connected to the charger? If yes, OK you say it's dead, so no screen display, BUT, can you hear if the hard dri've is spinning? I think it's very unlikely that a firmware upgrade process would have any chance of physically killing a unit altogether.
Another thing to check - is the battery firmly located in place? You can remove the front cover to access the battery compartment.
Hibbs
Yes - that is correct, I have been trying to reset the unit with it connected to AC power via the charger...No you cannot hear the harddri've spinning. Yes the firmware can kill the unit, not "physically" but it has logically shut down the unit to where it will not power up. The battery is firmly seated...Just as a side note, when I tried the original firmware upgrade the unit was plugged into the charger as well, so I know there were no power outages etc during the attempted upgrade.

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

Lack of Tech Support and inferior product

So tired of this lack of tech support for the G2. I'm on my second one. First one had a headphone jack issue that caused the mic to stop working, now this one is doing that, and to top it off I've had to do 3 factory resets in order to send picture messages. Fed up with this.

Headphone jack is basically shorting out the phone. This is a refurbished "like new" one and I've only had it a month maybe. The first phone I had replaced on the warranty. If you barely moved it, it would register as you having unplugged the headphones. Eventually it got to the point where the microphone wouldn't work either. So people could talk to me, but I couldn't talk to them. I've tried multiple headphones and auxiliary cords, they all do the same thing. I've googled the problem and it's a known issue with this phone, at least know by the customers, perhaps not acknowledged by LG.
Picture messaging is working for now, after my second or 3rd factory reset, this is also a known issue, I've gather from perusing the forums. Supposedly a glitch in the new OS. Hear there is talk of a fix in September or August.....I only use the native app to text pictures. I tried sending with data turned off and wi fi on, with data on and wifi off, and with both data and wifi on, and it refuse to compress the picture.

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

No noticeable speed differences running the four latest OSs on my machine.

New Mac Mini, Not so new LCD HDTV Monitor, no mac support

I have been attempting to set up a Mac Mini with a Maxent LCD 26" HD TV I can't get either the RGB or DVI-D input to accept signal. I have purchased DisplayConfigX and SwitchResX_X. Maybe they could work, but I can't get a signal to stay on long enough to change the settings as listed in other posts. I have tried booting in safe mode as DisplayConfigX instructions suggest. But still only am able to see the screen until gear starts spinning with apple logo, resolution changes spontaneously to one that I suppose is unsupported and I get the unsupported display and a beautiful blank blue screen. I tried manually inputting the resolutions the monitor manual lists, while connected with an lcd pc monitor. But I can't get the Maxent LCD TV monitor to stay on. It appears that if I could get the Mac Mini to send this resolution signal to the Maxent I would be able to delete any unneeded settings and that would be it.
Perhaps Tom Fussy can help me.I have been at this for over two weeks now. So I have become super frustrated. Of course Maxentusa.com offers no Mac support. But state that if Mac mini is supposed to work with PC that it should work with my Mac Mini. My LCD TV is about 6 months old I could still return it for maybe a Sharp Aquos, if that $300 dollar more TV would work. I am happy with the Maxent otherwise. Keeping it, and having it work with Mac Mini Is my choice. Of course Apple offers no support for the Maxent monitor and directed me here. This is my first discussion group post. School me if I have not followed the rules completely.

I was able to get the settings for Maxent using Gregory's software to force 640x480. Here are my settings
DDC block generated by SwitchRes X for display
MX-26X3
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 34 38 35 08 06 44 00 00
1 | 0C 0F 01 03 0F 3A 20 78 88 00 0D 00 00 00 00 00
2 | 00 47 4A BD CE 00 31 59 45 59 61 59 81 80 81 C0
3 | D1 C0 01 01 01 01 FF 1D 56 EA 50 00 20 30 46 28
4 | 55 00 40 44 21 00 00 18 8C 0A D0 8A 20 E0 2D 10
5 | 10 3E 96 00 40 44 21 00 00 18 00 00 00 FD 00 3C
6 | 55 1F 45 0B 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 4D 58 2D 32 36 58 33 0A 20 20 20 20 20 00 2D
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........MAX
Product Code........13576 (3508) (0835)
Serial Number.......17414
Manufactured........Week 12 of year 2005
Max H Size..........58 cm
Max V Size..........32 cm
Gamma...............2.20
DPMS Supported Features:
Standby
Display type:
RGB color display
Input signal & sync:
Analog input with: 0.700V / 0.300V
Serration Vsync
Sync on green
Separate Sync
Composite Sync
Color info:
Red x = 0.000 Green x = 0.000 Blue x = 0.000 White x = 0.280
Red y = 0.000 Green y = 0.000 Blue y = 0.000 White y = 0.290
Established Timings:
800 x 600 @ 60Hz
640 x 480 @ 75Hz
640 x 480 @ 72Hz
640 x 480 @ 67Hz
640 x 480 @ 60Hz
720 x 400 @ 70Hz
1024 x 768 @ 75Hz
1024 x 768 @ 70Hz
1024 x 768 @ 60Hz
800 x 600 @ 75Hz
800 x 600 @ 72Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
#0: 640 x 480 @ 85Hz (3159)
#1: 800 x 600 @ 85Hz (4559)
#2: 1024 x 768 @ 85Hz (6159)
#3: -768 x -614 @ 60Hz (FFFF8180)
#4: -768 x -432 @ 60Hz (FFFF81C0)
#5: -128 x -72 @ 60Hz (FFFFD1C0)
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1366 x 768 @ 60Hz
H. Active...............1366 pixels
H. Blanking.............234 pixels
V. Active...............768 lines
V. Blanking.............32 lines
HSync Offset............70 pixels
HSync Pulse Width.......40 pixels
VSync Offset............5 lines
VSync Pulse Width.......5 lines
Pixel Clock.............76.79MHz
Horizontal freq.........47.99kHz
Vertical freq...........59.99Hz
H Image Size............576mm
V Image Size............324mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #1 is Timing definition:
Mode = 720 x 480 @ 60Hz
H. Active...............720 pixels
H. Blanking.............138 pixels
V. Active...............480 lines
V. Blanking.............45 lines
HSync Offset............16 pixels
HSync Pulse Width.......62 pixels
VSync Offset............9 lines
VSync Pulse Width.......6 lines
Pixel Clock.............27.00MHz
Horizontal freq.........31.47kHz
Vertical freq...........59.94Hz
H Image Size............576mm
V Image Size............324mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......31-69 kHz
Vertical frequency range.........60-85 Hz
Maximum bandwidth unspecified
Descriptor #3 is Monitor name:
MX-26X3
Mac Mini 1.42 g, superdrive, ATI 9200 Mac OS X (10.4.2)

Non existent mac support

I have three major problems - i have to restart safari twice a day cos it slows to a crawl, i have to reboot my mac at least once a day, and snow leopard defaults to mac email but i use gmail. i have set up support calls with mac support, which i pay for, and get the callback which says calls are answered in the order received and then tell me i am on hold for ten minutes. Is Apple becoming Microsoft? And since Apple no longer provides support, how do I stop the ongoing "callbacks" which always put me on hold. I run a business. Should I go back to Microsoft and Dell for non existent support?
Safari = memory leak? not enough cache? problems with snow?

mhh.. when i phone apple care, i wait my 10 minutes and have someone on the line who will try to help me. don't see where the problem is, as i'm not the only person who calls them.
you could try to delete safari's cache, if the browser gets slower. it's an option in the safari menu. also, if safari's generally to slow for you, you can easily try other browsers like chrome, opera or firefox.
why do you have to reboot your mac once a day? does it freeze? or kernel panic?
as for SL defaulting to mac email instead of gmail... i don't get it. Sl has it's own mail client. there you can setup your gmail account as POP3 or IMAP account and the mail client will send and load mails only from this account. but the same here as for safari. if you don't like apples mail client, install another one like thunderbird.

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?

billqaz a écrit:
Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?
It's the default sort order. You can choose chronological order( ascending or descending) or by Import batch or by filename. Contrary to older versions, those sort orders are available not only in thumbnail view, but also in Folders view and albums. In albums you can sort as you like 'custom order'. No difference in Mac or Win.

I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd Re setting be re starting and pressing some keys, Can you help?

I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
Re setting be re starting and pressing some keys, Can you help?

I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
Re setting be re starting and pressing some keys, Can you help?

VERY dissapointed by lack of Mac support

Similar Messages

Maybe you are looking for