Very Fast Rendering to sudden Painful Crawl

Both AE and AME updated to most recent CC 2014 versions ~
I've been attempting to render-out a 8-minute composition that starts to encode in Adobe Media Encoder at a gangbuster's pace, only to stop to an almost insta-crawl. 75% of the encoding in AME took less than an hour, with an estimated 10 minutes left. Then BAM. Hit a brickwall. Now it's been going an additional 2 hours and only updating a frame every few minutes. At this rate, having been cruising this whole time, it seems like it won't finish rendering for hours or maybe days with "3 minutes estimated left".
Multiprocessing is off. My resources right now show AFTERFX.exe taking up 3.8 gigabytes of RAM, and Adobe Media Encoder.exe 463k. I have 16 RAM installed. Compositions are not Raytraced.
Any help greatly appreciated!!!

Hi Szalam,
Thanks for reply. Having seen no apparent issue with the crossover to 2014, I uninstalled CC. That of course wasn't the smartest thing. However, I've had a few days now of success -- I closed out of absolutely every other program after beginning the encoding in AME, and also closed-down After Effects. Since then, it's been rendering without too much of a hitch. I guess there's a memory issue happening somewhere. Perhaps 2014 is more resource-heavy? Anyway, so far things are going ok. I also "saved as" a CC version of the file, which might also be the reason for the current success.

Similar Messages

Bluetooth Apple mouse suddenly very fast

I've used the Apple BT mouse since getting the Mac mini G4 more than a year ago with no problems. It's set to the second highest notch in Systems Preferences. Yesterday the batteries ran out and I replaced them after switching the computer off. When I turned the mini on 10 minutes ago, the mouse movement was suddenly very fast. I had to bring it down to the second slowest notch and even then it feels faster than it was before. The lowest setting slows it down to an unusable crawl. I've repaired permissions, rebooted and switched the mouse off and on without changing its behaviour. I'm on 10.4.7 and up to date in OSX. It isn't a major bother. Just curious about what's going on.

Hi again, Glenn:
I solved the problem by changing the batteries. Very strange. I started fiddling with the mouse after the new postings on this thread and all of a sudden it stopped working. It would click but would not move. I thought I had a dead mouse since the battery gauge still showed 3 bars and there was no warning of low power. I changed the batteries and the mouse came back to life in its original condition. Funny thing is, all 4 batteries were from the same pack of 8 Duracell alkalines. If this was a battery defect, it's certainly the first time I've ever come across one. Now I find the "reduced" speed too slow and have set the tracking speed to maximum!

Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

Browsing is very slow on Mac Mini connected to 100mbit LAN. FTP and file download is very fast.

Hi all
I have a strange behaviour of my Mac MIni 2012. The mini is connected to the internet by LAN. When I download a file via http or ftp everything is very fast (arround 95mbit/s). But when I try to open a website in Safari, Chrome or Firefox i have to wait some seconds until the page starts rendering.after the page is rendered completely, everything works fast and smooth.
Do you have any ideas where the problem migth be? I have reinstalled Mavericks from zero yesterday. The problem resists. With my Macbook Air (conntected to the same router) and my Windows computer I dont have this problem.
THanks in advance for your help.
Greets
Marc

By any chance, do you run sophos? I had the same issue as you and fixed it on my mac mini and macbook pro by doing the following:
Sophos --> Open Preferences --> Web Protection --> General
You will need to enter your admin password after clicking the padlock in the bottom left to allow you to change settings.
From there, deactivate "Block access to malicious websites using realtime URL reputation checks". For good measure, I also deactivated "Block malicious downloads from websites".
Hope this helps!

TS2634 Battery draining very fast?

My iphone 4s battery suddenly began draining very fast with no change in how I use the phone. Any way to correct this?

You might try force closing all your apps: double-tap the home button, tap and hold one of that apps in the list at the bottom until it wiggles, tap next to all the apps on the list to close them, finish by tapping the home button. Hopefully that will resolve things. Also, there are some suggestions from Apple on maximizing battery life here: http://www.apple.com/batteries/iphone.html.

Why did my podcasts started talking very fast? iphone4s

I listen to podcasts on my iphone 4s. Suddenly they all started talking very fast. They are fine on iTunes and on muy other iPod. Any ideas?
Thanks,
Dgood930

Connect to Computer
Click on iPod under Devices
Click podcasts
unCheck Sync pod casts- remove - apply
Recheck Sync podcasts- apply
Is it fixed?

My iPhone 5s button home is not work and battery draining very fast

is buy new iphone about 1 month in true shop in thailand
1.is use about 15 days have a problem battery draining very fast * 16/5/2014
i go to shop true but shop tell is not problem
2.bluetooth is not compair with my car
but in the first time i can connect bluetooth. But 1. shop true restore my device after then i can not connect this
3.the button home i cannot used 25/5/2014
i go to true shop again
- tell to me this shop not receive becasue the phone have scratch and i want to change i pay 9800 bath about 326 us dollar
BUT i seach information scratch about 4mm. right
*1 min 1 per*
i hope apple help customer i buy product apple a lot of because i thust your brand but this case im not sure
plese reply is mail as soon as im wait your answer....

12 hours i don't have a answer.... this time my phone not used

 hello actually I have purchased my iPod touch 4 generation 1 month back.initially I find that it's battery life is superb.it works for 5 -6 days in standby and 8-9 hrs usage time but from past 2days its battery list draining very fast I have to charge i

 hello actually I have purchased my iPod touch 4 generation 1 month back.initially I find that it's battery life is superb.it works for 5 -6 days in standby and 8-9 hrs usage time but from past 2days its battery is draining very fast I have to charge it twice a day.i m using iOS 6.0.1.plz suggest me what to do??its just 1 month old ..I have spend lot of money to buy it, I don't want it like that..plz reply.....

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then see if placing the iPod in airplane mode when in standby helps.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

After upgrade to IOS 6 my iphone 4S is heating up a lot and the battery is getting depleted very fast (within 2-3 hrs).

I have upgraded my Iphone 4S to IOS 6.0 Yesterday. Afterwards I noticed that the phone gets hot quite often, even when it is idle. Additionally the battery gets depleted very fast ( 100% to 20% within 3 hrs while I was reading a book on the app mobibook for about 30 min). Last night, I left the phone connected to the charger, as I normally do, I found the phone to be extremely hot in the morning. Any help will be appreciated. In case there is no rememdy I would like to rollback to 5.1.1.

If your iPhone 4S is extremely hot, do the following:
Turn off your iPhone 4S and wait for 1 - 1 1/2 hours.
Turn on your iPhone 4S.
If the problem occurs, turn off your iPhone 4S and wait for 2 - 3 hours.
Turn on your iPhone 4S.
If your iPhone 4S is getting low, charge your phone
Repeat in step 1.

I got my iphone 5 3 weeks ago and the battery life is very short. It drains out very fast. Does anyone know if it's a problem with the iOS or with my phone? Because I'm a bit concerned

I recieved my iPhone 5 3 weeks ago and the battery life completely *****! After doing a few things and maybe using it for about 30 minutes the phone start overheating like crazy then the battery starts dropping very fast. Does anyone know if it's a problem with the iOS or with my phone? And is anyone else expierenceing these problems?

It sounds like you have an app that is incorrectly continuously using data and power... from normal use the phone should NOT be getting that warm... only constant video playing via data like Netflix for example would result in that...
I'd say that you should remove all apps in the recent app tray... tunr phone off... then once you power back on...
Hold BOTH home and sleep wake buttons together until you see a white apple symbol... then release both buttons...
This will ensure you have no apps running...
I've experienced a hang up with mail while out and about that has resulted in this on my iPhone as well... Once I performed these steps it was fixed... it seemed like it got stuck and that's what caused the warm phone and battery drain...
I notived that when it gets stuck (mail app that is) I will see the text connecting at the bottom and it never changes to "updated" like it should... this is my trigger that it's gotten stuck.
Have not really figured out what causes mail app to get stuck yet...

HT4623 I updated ios6.1.2 on my ipad2 and it is draining my battery very fast. How do I go back to 6.1.1 ios

I Updatedios6.1.2 on my ipad2. It is draining battery very fast. How do I fix it ? Can I go back to old version of ios6.1.1 if yes how?

Honestly this is the final nail in the coffin. Mine too has terrible battery life since the 6.1.2 update.
What the **** has happened apple. .? You have totally ruined iOS 6 its been a shambles since day one!
I have tried every suggestion so far and it's just the same.
But that's it now. My ipad is goin up on ebay and I'm looking at other tablets. I haven't had one issue with my nexus 4 since I went from iPhone 4 to that. Infant the updates have made that better not worse!!

Battery draining very fast on MacBook Pro

Just in the past month my battery has started to drain unusually fast. It will go from 100% to less than 20% in 3 hours. Most of the time the only programs I am using are Microsoft Word and Safari (thus, wi-fi), but even if I am not actively using web pages it drains very fast. It doesn't seem to help if I dim my screen. Any ideas? Is it just time for a new battery?

Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

What is the best way to turn emitter on/off very fast?

What is the best way to turn emitter on/off very fast? Now we are using very slow shutdown.
Why do we need this feature? Because it is important to solve the problem of interference, when two IR sensors are working at the same time and are grabbing the data.
We are porting now our solution to Kinect v2 from PrimeSense/RealSense.
I am also have a list of other questions (interpolation of data, problems with different types of surfaces, etc) and it will be great if someone can contact me by email ([email protected]), so I can
provide link to our assets (PLY, video, shots) and detailed report about issues that we have.
Best regards,
Konstantin

There is no api to support turning on/off the emitter. The only way to stop the sensor is to call Close on the sensor/reader object. Keep in mind if there are other applications with outstanding readers/sensors open will keep the sensor on.
Carmine Sirignano - MSFT

I recently performed a upgrade from 7.0.5 to 7.0.6 and I found that my phone battery drain up very fast and the battery unable charge to 100. Besides, the battery live is going down when I charging with 3G on.Any solution for my issue? Please help.

Hi, I had my iPhone 4S and I'm recently upgraded it from 7.0.5 to 7.0.6 and I found the battery drain up very fast if compare to iOS 7.0.5. Besides, I also unable to fully charger my phone to 100% now - max is 85% with phone either in airplane mode or switch off totally
May seek help from your advise on above case.
Thank you
Best regards,
Adrian

Try killing the battery (Let it drain---turning on all the settings, playing a video, and having the brightness up kills it faster), then let it fully charge from there. Let me know if that works.

I dropped my iPhone 5s (with a otter box) and the rear camera just stopped working. It also now starts to over heat near the rear camera and the battery drains very fast.

I dropped my iPhone 5s on the floor on accident. Of course I have a otter box on it, but when i picked it up, the rear camera stopped working. Also the area around the rear camera started to overheat. I was so hot that it you touch it it will burn you. The battery also started to drain very fast.

You broke it. That seems pretty obvious. A case, including the otter box, is not a magical force field that can protect your phone from the force of gravity.
make an appointment at the genius bar. An out of warranty replacement will cost you $269.

Very Fast Rendering to sudden Painful Crawl

Similar Messages

Maybe you are looking for