Very high contrast or inverted colors during scree...

I've had this same phone on my 1st 1520 and this is repeating on the new replacement as well.. so far I've seen it twice in the last 10 days, latest 15mins ago. When I unlocked the screen, the lock screen goes all weird.
It was like high contrast or the colors were inverted? I tried to take a screen shot, but it corrected itself before I could get the screen shot off.
Anyone else have or had this issue? Something to be concerned about?
I've seen similar post here - http://forums.wpcentral.com/nokia-lumia-928/253914​-very-high-contrast-screen.html I'm experiencing the same kind of screen.
Attachments:
1520Screen_Glith.jpg ‏51 KB

Hay guys I've gone throw 5 of the Nokia Lumia 1520 the cyan have a problem that att will not address or give a recall for because not enough of us are experiencing the problem we are it either your graphic card or your screen I will let yall no no matter what replacement cyan you turn in they will not admit to there faulty device the cyan Nokia Lumia 1520 they all do it no matter what even the brand new ones your get from the store I will let you know as well that eventually the screen rolls bleaches and inverts in the end. My phone works fine by the way the colors are just messed up.they will work fine if you can deal with your near 700 dollar phones screen looking funny then by all means lets not complain to Nokia about there phone. Unfortunately att doesn't make the phone they sell it so tell Nokia about the cyan problem and we should have our problems resolved

Similar Messages

  • IPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast primary colours only, no tonal graduation. Wifi no longer works.

    iPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast with bright primary colours only, no tonal graduation.Initially problem arose every time I switched the Camera on, but has worsened such that any application can cause it. In Camera, after a short time screen goes black. Also,  Wifi no longer works. 

    You're welcome
    In case you don't want to buy a new iPhone, Apple will replace the whole unit if you are willing to pay the service fee of 149$ for the iPhone4.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Windows 8/Firefox 19/Dell Laptop Any way to decouple High contrast from my color settings?

    I find the following note on Firefox help pages:
    "Firefox automatically detects if you are using a High Contrast theme and displays everything in your high contrast color scheme. This overrides all other other browser or web page settings, and it affects the Firefox interface itself (all menus, windows, and dialog boxes) and the content of any web page you visit."
    Is there any way of decoupling this behavior? It makes some of the web pages I read unusable. The fact is, Win8 seems much worse than Win7 in allowing the user to have flexibility in their color selections. For my color blindness, I cannot seem to find a workable standard color scheme. The high contrast is no great shakes, but is the best of the lot. The coupling of FF display to high contrast seems particularly odd since FF seems to have all the tools necessary to allow a user to configure their pages that way anyway.
    Any pointers people can provide would be great - even pointers on how to get to Win7 style color personalizations which I cannot find - largely because I cannot read the screen easily!
    Thanks.

    see this link:
    [[Change the fonts and colors websites use|Change the fonts and colors websites use]]

  • High contrast when viewing a slideshow

    When I look at a photo in full screen mode, it is fine, but as soon as I click on the slideshow, the contrast changes and the pictures all appear in very high contrast, and they look horrible. Does anyone have any idea why this is, and how to fix it? Does anyone else suffer from this problem? This is on a 24" iMac.

    Start with this basic fix: trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Regards
    TD

  • T510 DISPLAY Issue: Intermittent high Contrast/Brightness

    Hi folks - This is my first Lenovo forum submission and I will do my best to describe the problem with my laptops' video/display. I'm all ears for your suggestions.
    *Issue*
    The display would occassionally dip down in brightness/contrast then change up to a very HIGH contrast level on its own. The desktop icons, background image & browser images become un-sightly bright BEYOND your normal Lenovo Power Manager settings. All the white hues turn even brighter, and some hues are NOT viewable at all on certain backdrops. Usually, it resolves itself after several minutes.Then it's business as usual.
    I do not believe it has anything to do with the Power Manager settings (e.g. Idle Time, brightness control, Battery vs AC power, etc.). It simply occurs on it's own then disappears. A reboot can help and so does closing the lid and re-logging into Windows. But who wants to practice that technique after paying over $1600 for a professional grade business laptop?
    I found only ONE forum message that came close to reporting the problem, found in the body of a message and NOT as a subject (SEARCH:  "screen image fades as if you lose contrast")
    Frequency ? - Atleast 4 times a month for the past 3-4 months since my purchase in summer 2010.
    OS: Windows 7 (64 bit)
    CPU: i5-540M 2.53GHZ
    RAM: 4 GB
    Laptop model: T-510
    Laptop Product ID: 4313CTO
    Graphics: 15.6 HD+
    Battery: 6-cell
    Purchase date: summer 2010
    Solved!
    Go to Solution.

    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-Screen-flickering-randomly-screen-cont...
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Firefox option "Allow Website to choose their own font/color" fails in High Contrast

    On Windows 8.1 and Firefox 32, the option to Allow pages to choose their own colors, instead of my selections above" Fails completely if Windows 8 is using a High Contrast Theme.
    Regardless of the Windows Theme, Firefox should allow pages to use their designed colors otherwise problems will exist on a number of sites. Including the Mozilla.org page.
    With the Allow Pages... turned on, it should look like this:
    http://yosemitelandscapes.com/temp/correct.jpg
    Instead the Windows High Contrast is forced upon the web site:
    http://yosemitelandscapes.com/temp/incorrect.jpg
    For reference Chrome does this correctly which has forced me to switch to the Chrome Browser until a fix is issued for this problem.
    NOTE: This is not the same problem people reported where High Contrast did not function in Firefox 29. But I think it may be related to the fix.
    I have tried "reverse logic" and turned these options on and off to see if the behavior changed. Pages refreshed and even closed and reloaded. I can find no way to work in High Contrast Themes and allow pages to show up normally in Firefox 32.
    I much prefer the security and design of Firefox. Help us please!!!

    That's a painful example. I don't have access to Windows 8/8.1 myself, but I suspect this is by design, as I have seen other screenshots from users using high contrast dark themes that did not have background colors and images.
    Firefox 32 contains a change from this bug: [https://bugzilla.mozilla.org/show_bug.cgi?id=1042625 Bug 1042625 - Page should be drawn in accordance with the high contrast themes]. The testing (and a comment in the patch) refers to solving a problem on Windows 7, but apparently Windows 8 also was affected.
    I don't know whether there is a workaround to tweak what is and isn't displayed in the page with a high contrast theme.

  • High Contrast Mode (VERY URGENT)

    (VERY URGENT...)
    Hi all ....
    I am developing a Java-Swing based application in Win2K and I need to find out whether the user has switched to the high contrast mode on the fly .... Is there any method that can be called to test the high contrast mode in J2sdk1.4 ??
    Also... how do I get the new system font and the new system font size in the high contrast mode ???
    Can somebody give me a sulution ??? I need it very urgently ....
    Thanks a lot...
    Ganesh C.N.

    I have got the same question for Windows XP. More generally, most of the apple applications (paje, calandar,contact..) interfaces (itune, icloud) and web pages (forum, support..) have a low contraste or colours that are impossible to change.
    Any help would be appreciated...

  • My screen went high-contrast.  color profiles and calibration didn't help.  It looks fine before I log in though!

    My screen went high-contrast.  color profiles and calibration didn't work well -
    HOWEVER-
    It looks fine right before I log in!
    Is there a way to repair the color profiles or whatev?
    I Installed Photoshop Elements and Premiere Elements a couple weeks ago that's when I think it began

    I found it!  "Enhanced Contrast" was set in the "Universal Access" control panel
    Thanks, whoever posted that!

  • Trying to use windows in high contrast mode but DW CC goes all black background too and I loose code coloring. I dont mind the black, but code coloring must be essential

    Is there a way to keep the code coloring when using windows in high contrast appearance?

    Sorry, I don't have your version, but have you checked in your personal configuration folder and editing these files?
    https://forums.adobe.com/message/2260994#2260994
    CodeColoring.xml
    Colors.xml
    You can also download color schemes like
    http://www.xenon-webdesign.co.uk/dev/dark-code-view-theme-color-scheme-dreamweaver-cs3-sub lime-text-skin/

  • Suggestion for outdoors high contrast colors that will be used by farmers in their fields.

    I am intending to use 'Mexican Blanket' as palette for my farmers app.
    It would be great to hear from someone what for outsoors app would be good colors.
    So if you have some references or thoughts about outdoor high contrast colors for tablets or phone app's, please let us know.

    Hi Budone,
    We are just getting started here and are happy to hear your suggestions.  We'll be making improvements as we go along and your feedback is much appreciated. 
    Thanks!

  • Macbook Pro very dim screen + inverted colors.

    I picked up a 2006 Macbook Pro that was pretty beat up from a friend (probly dropped a few times.) The Macbook runs alright but I am having a few problems with the screen that I just can't seem to find an explanation for.
    First, the screen is very dim. Not dark, as if the backlight was burned out, but dimmer than the lowest brightness setting on my newer Macbook. This is with the brightness set to the highest setting, it will get dimmer if I use keyboard key to adjust the brightness.
    Also, the colors are inverted. Now I have triple checked the Universal Access settings and the colors are inverted when the setting is set for normal colors and the colors return to normal(although still dim) when the inverted colors option is selected.
    As far as troubleshooting, I have hooked the computer up to an external monitor and it displays at the correct brightness and color settings. So, while the colors or normal on the external monitor they are inverted on the macbook.
    I can provide pictures if needed, and can work my way around the inside of the macbook if need be. Any suggestions or ideas are greatly appreciated!
    Message was edited by: babyed (Grammatical Errors)

    Thanks for the response!
    I tried resetting the PRAM like you listed but that had no effect. I bought a new LCD inverter for my macbook pro to see if that could possibly fix the brightness problem, but the problem still persisted.
    The previous owner had mentioned something of a overheating problem. I noticed nothing melted/browned on the logic board and all the cables seemed to be fine. I reseated all the connections to the LCD screen and the computer still booted with the same problems. I have not noticed any excessive heat problems with the computer since I have had it.
    Also note, when the computer begins to boot and displays a white screen with an apple, it is just as dim as when the computer is running. Leading me to believe it is a hardware problem(I have also reinstalled the OS recently).
    Tilting the screen to different angles and putting pressure on different parts of the back of the LCD does not make any differences either.
    Thanks again for the input.

  • Change menus to black background and white text (not invert colors option)?

    I have an iPhone 5 on the way to me as I got one for a very good price. I am visually impaired. I currently have a Samsung Galaxy s3 which is crapping out on me after having it for a long time). One of the features I love about it is, the menus (settings, contacts, etc etc) are in high contrast (black background with white text, which is much easier on my eyes and easier to read. It is my understandiing that the iPhone is not the same way. I had a friend look on his, and the only option he found was the "Invert colors" option. The reason I don't want to use that is because it inverts ALL colors for everything on the phone, including pictures. t just want to invert the colors in all the menus so I can read them easier. Is there any way to do this? BTW it's running IOS 8.

    the invert colors option is the only way to achieve that on iPhone currently
    you should go to http://www.apple.com/feedback/ and request that feature added, I think a lot of people would use that

  • Brightness very high in video store purchases?

    I use iTunes only to buy music and just now decided to try a video, I have the player installed for Windows 7. For some reason, the videos I download seems to have a very high brightness setting. Since the iTunes player doesn't seem to have a way of changing brightness I tried quicktime. The problem persists, but here at least I can play with the brightness, contrast and colour. Still not perfect though. Is this normal for iTunes? Does everything have this high brightness? If so, why?

    When shooting interviews or other static scene, best to set focus and exposure to manual and lock them in so nothing changes during the course of the taping. To correct in post, you'll need to apply one of the available color correction tools in Adobe, and then keyframe the results over time to smoothly counteract the on-screen problems as they happen.
    Without seeing the footage, hard to say which is the best tool. In fact, I use Matrox hardware and therefore use the Matrox Color Correction plug-in and honestly never use the Adobe color tools myself so can't be of much help there. If you need help with animating keyframes, there are plenty of tutorials on that type of thing at the Cow, etc.
    Thanks
    Jeff

  • Looking for a high-contrast extension for Safari for Windows

    First of all,what do we call them - extensions or plugins?
    Is there an extension for Safari for Windows for high-contrast? I can't find one anywhere. Windows 7 is set to a HC theme. IE just follows suit. Chrome detected this, ad offered to install a theme.
    Don't know why, but I still prefer Safari on my Win7 system. But really need HC. One that just inverts the colors would work, but one with several other options like the Chrome extension would be better.
    A Link! A Link! My kingdom for a Link!

    Apple has dropped support for Safari on Windows

  • Images on a page cause the High-Contrast mode to fail

    I have created some very simple two page PDF files, with both Microsoft Word 2013 (using the Acrobat Pro XI PDF Maker) and Adobe InDesign CS6.
    When viewing the PDF I set a high contrast colour scheme by going to Edit/Preferences/Accessibility and selecting to "Replace Document Colors" and choosing a high contrast color scheme (such as "Green text on black").
    Without an image in the document everything works fine.
    However as soon as I place an image on the page, then all I get is a completely black page. The second page without the image displays as expected.
    Does ayone know of a workaround for this problem?

    The page definately has text on it.
    In Word the page consistes of a Heading 1, followed by a few lines of text in a single paragraph. This is repeated on the second page. This works fine without an image, but as soon as a small image (about 200px square) is placed in-line with the text it displays as just a black page when the high contrast scheme is selected. If the background colour is change to something other than black it is as though there is a large rectangle over the entire page, and the underlying text can be seen underneath if it is a lighter colour, but is obscured if black.
    Further experimentation seems to indicate that if the image is a JPG image then it works fine, but if the image is a GIF or a PNG image then I get the black page. I was not aware that there was a limitation that prevented these two types of image being used?

Maybe you are looking for

  • Need to add navigational attribute in query level

    Hi,     Im new to bi . in dso i have  a navigational attribute  0CRM_MKTELM _ 0BPARTNER . 0CRM_MKTELM is a master data and  0BPARTNER also a master data that dso is used in infoset , 0country is the attribute of 0bpartner. i need to bring the 0countr

  • Partially Paying AR Invoices using DTW

    I am trying to add a cash payment for $500 against a $1000 invoice using DTW by filling in the below fields. However, it is closing the invoice even though it hasn't been fully paid. Are there additional fields that I need to fill in to specify that

  • How to programmatically add af:setPropertyListener to CommandImageLink

    Hi All, My Requirement: programmatically add af:setPropertyListener to CommandButton I referred this post how to programmatically add af:setPropertyListener to CommandButton and followed the following code. Code: // create a value expression ValueExp

  • PLS-00306: wrong number or types of arguments  help!!!

    Hi, I am new to pl/sql programming I am stuck into oracle error for my code. Plz help me with this issue my code is as follow: CREATE OR REPLACE PROCEDURE raise_salary (emp_id IN employee.employee_nb%TYPE, amount IN employee.salary%TYPE, emp_name OUT

  • JFrame.setVisible(boolean) -- strange behaviour

    I have a class derived from JFrame, (not set visible by default) and a global instance of it, initialised by an other classe's constructor. Problem: Whenever I invoke its setVisible from this constructor, it works fine, but called from the same class