Very long time for 0EC_PCA_3 ectractor

Hello,
We have a problem with 0EC_PCA_3 extractor in delta mode. It takes very long time (4 hours) for a very few records. Is it normal .? How to optimize this ?
Thank you in advance forr your help.
Best regards
Nicolas

Dear Nicolas,
Iu2019m going try to help you regarding your question,
I have searched in help sap, some feature about how get better performance:
I found the following information:
To optimize the performance of data procurement when DataSource 0EC_PCA_3 accesses line item table GLPCA in the OLTP, you should set up an additional secondary index. This should contain the following fields:
1.     u2022         RCLNT
2.     u2022         CPUDT
3.     u2022         CPUTM
For R/3 Releases 4.0B and 4.5B, you have to install note 580273.
More detail in:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5d/ac7d8082a27b438b026495593821b1/frameset.htm
I hope this information can help you,
Luis

Similar Messages

Why does it take a very long time for shows to post to VOD?

A lot of programs say they will be on demand the following day. This isn't true. Seems you have to wait a week or longer for shows to post. Why? Comcast would usually be by 4:00 PM the following day. When you miss something and want to catch up on it you have to wait, and then the next show is already being shown by the station. It's a pain. I know I can get a DVR but that costs more $$$. If you advertise your VOD to be current then be current.

Since the Verizon Forums are for users to help other users, I doubt you will get any definitive answer. We customers simply do not have access to any information on how Verizon handles VOD.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Discoverer report is taking a very long time

Hi All,
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
Regards
Kumar

Please post the details of the application release, database version and OS along with the discoverer version.
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Middleware- Taking long time for generation of Runtime objects- SMOGTOTAL

Hi Experts,
I am doing middleware settings for connecting CRM 2007 with R/3 4.7.
When i am generating all the required objects ( Replication objects, publications....) using the transaction code SMOGTOTAL, system is taking very long time for generating the objects. Generally it takes 4 to 6 hours but in our case it has already took more than 36 hours and still its running.
Can anybody tell me what i need to do to make the generation process faster.
Regards
Nadh

What I read in the best practice:
It is not required for a new installation.
Typically this activity has already been executed during the system installation or upgrade.
Use transaction SMOGLASTLOG to check if an initial generation has already been executed. In this case you can skip this activity.
I checked transaction SMOGLASTLOG, and in our case the initial generation was not yet executed. I also couldn't continue with the next steps.
That's why I started up the job, it is finally finished after 104 hours..
Thanks for your fast reply.
Jasper.

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

When we run $CRS_HOME/root.sh scripts-This hangs for a very long time

Hi,
At the time of oracle cluster ware installation, when we run $CRS_HOME/root.sh scripts…
bash-3.00# /export/home/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d1s1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
This hangs for a very long time; I controlled out of it and re-run it. The same result, it stops at the last line for hours now. Any idea?
Thanks
ANup
Edited by: user485641 on २५ अप्रैल, २००९ ७:०५ अपराह्न

what os ? what Oracle version?
What you find on cluster log.... ?

Hyperlinks (a href) have been outdated for a very long time

I have felt that "a href" hyprlinks have been outdated for a very long time.
so much so that they should no longer be known to most developers (like frames and html based hyperlink maps)
the only thing they can do is cause a new page to load.
The event which causes this has to be a click (on an image, string of text or other compatable html object).
and the event itself has to be the loading of a new page.
by comparason by using javascript you can use ANY html attribute (Onclick, OnMouseover, OnMouseout ect) to trigger to event
or you can use ANY event listener to trigger the event.
You could also set these to only trigger under specific circumstances. (for example an onclick event followed by a mouse over at least 3 seconds later)
and the event which occurs can be anything
it could be a simple page change
or it could bea page change with a modificaton (such as a preloader displaying to hide the fact that the new page is loading)
or it could be a page change, or an animation, or anything else you can think of determined by an IF statemen
furthermore by using AJAX or JQUERY you can have an event which alters a database or SQL file or, in simple cases plain text file based on the users actions - and then determines the action it performs based on the content of the database or SQL file or text file
This coveres everything from very simple actions
to very complex dynamic actions which have an infininte range of possibilites
so
why are is a href still used?

I don't think any serious web developer can afford to make sweeping assumptions like this. Anchor tags are stable and 100% reliable on all platforms & web devices. It might surprise you to know that many people disable client-side scripts for security reasons. How will these people interact with your site?
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Nancy O.

Hyperion System 9.3.1 reports taking longer time for the very first time

We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

Query running for a very long time

Hi I have a sales Query which is running for a very long time,
It is built on a multiprovider. The multiprovider gets feed from cube and DSO.
It is taking very long time to run.
I need to do some performance tuning can you please suggest.

Hi Ravi,
First maitain BW statistics for that query and after that go to se11 and give table RSDDSTAT. just check how many records selected in data base and how many records transferred.
according to this statistics create aggregates by giving propose aggregates by using statistics tables. after running a query check in RSRT whether the data is coming from aggregates or not.
do not exclude any selections try to include in query restrictions.
try to create secondary indexes.
let us know the result.

OS 10.3 - Hub shows huge "message deleted" sign for a very long time

I genereally really like the 10.3 OS update, but there has been a change to the hub which is puzzling me:
When, for example, I open my email account in the hub, I get the option to show trash bins next to all messages so I can delete them more easily. Great!
If I do that, however, I get a huge sign "message deleted / retrieve message" (or something similar, my OS is in German) - and it covers one third of the display for a very long time (four seconds or so), making the feature super slow instead of fast. Because, if I want to delete the next message, I will have to wait for it to disappear. Otherwise I might retreive the deleted message and start from zero again. Most of the time I cannot even see the next message which I would like to delete as the pop up is covering two to three messages entirely.
The problem would be solved if a) the pop up sign were significantly smaller or b) it would not show up for such a long time.
Is there any fix to this issue?

Hi,
I know what you mean but I think for the moment it can ot be changed. JSanders has opened a feature request post.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Feature-Requests-beyond-Blac...
I recommend you put this item there. Hopefully someone from BB reads it and changes it for the future.
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Why UPD processes execute report RSM13000 for very long time?

Hi,
When I use sm50 or sm51 to check my CRM system which version is 5.0, I found some UPD processes execute report RSM13000 for very long time. And some DIA processes are executing report SAPMSSY1 for verly long time too. They are occupy lot of processes of system. How does this happen? What's the reason and how to solve it? Thanks for your help!
Many thanks and Best regards,
Long

Please check the configurtion of your system.As per your reply it seems that the work processes are not sufficient in the system.
Hi wait time and response time ,is problem in the system.Either you have a lot of load on the system or you CPU's are over loaded.
Please check the system status from st06 and look for the cpu utilisation /memory utilisation.
SM66 to see the long running online and background jobs.
St03n - look for the workload and wait times for all transactions.
st02-may help in checking the memory paramaetrs.
Hope it will help you in resolving the issue.
Thanks
Amit

I've have just purchased FCP-X, but it is taking a very long time to install. It has been at it for over an hour. Does that seem right? Tahnks.

I've have just purchased FCP-X, but it is taking a very long time to install. It has been at it for over an hour. Does that seem right? Thanks.

It's about a 2.5G file. How fast is your connection? There should be a progress bar in the App Store next to the app. You should also see a progress bar on your computer, depending on the OS.

Very long time for 0EC_PCA_3 ectractor

Similar Messages

Maybe you are looking for