Very loud fan upon starting imac. Does anyone know how to fix?
My iMac has a VERY LOUD fan that turns on during start up and does not stoop. I tried to shut down and start up again. I also tried to unplug the machine overnight. Still happening.
Anyone have a solution?
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >
Similar Messages
-
My imac fan has become noisy -does anyone know how to repair?
my imac fan has become noisy -does anyone know how to repair?
First thing to try is resetting the SMC, do the reset several times as the first time may not work. Please click iMac SMC and PRAM reset for instructions.
-
I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar -
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!
Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!
-
my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help
If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
The candara font in italics is turning my words into what looks like another language (it's only happening in the italics version). Does anyone know how to fix it? (I'm running OSX 10.8.3 on a new iMac and the only change I've made recently is to install MS Office for Mac 2011)
This is what the font turns it into (it's supposed to say Chrysler Building & New York Public Library). The font came with Pages which is what I'm working in. It worked before but isn't now.
-
When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
My Husband turned his desktop off without shutting down now When my desktop (Mac Power G5) starts up a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?
Step 1- Try booting to Startup Manager by holding Option/Alt key.
Select the boot source and click the right arrow.
Once booted, open System Preferences and select the desired boot volume.
Replacing the PRAM battery is likely wise if the machine keeps forgetting it's boot source.
If that doesn't work,
Step 2- Boot holding a mouse click, insert the OS X install disc and hold C to boot to the install disc.
Once booted, open Disk Utility and "Repair Disk" on the boot drive.
Once done, reboot normally.
More:
http://support.apple.com/kb/TS1440 -
I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
http://www.apple.com/support/systemstatus/ -
I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!
You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry. -
I updated my iphone to OS 5.0.1 and i can not add events to my iphone calendar- does anyone know how to fix this issue?
I updated today to the 5.0.1 and now when I try to sync to ITunes, it doesn't recognize my phone and an error message comes up saying that "This iPhone cannot be used because the Apple Mobile Device service is not started.' What does this mean? Never mind - I found an article in the Support about this very thing! Thanks!
Message was edited by: Peytsmom -
Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?
Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Internal speakers are not working, they're not showing up at all. Does anyone know how to fix this?
My computer's speakers are not putting out sound. They worked fine yesterday, and I just now started up my computer and began using it today. The internal speakers don't show up on my list of output devices in settings, and I can't adjust the volume. Any help is really appreciated!!!
They are all in the same folder and it says all images are there, but it is only showing 1 card's images at a time. Does anyone know how to fix this?
This is kind of confusing, on the one hand you say "it says all images are there" and then you directly contradict this by saying "it is only showing 1 card's images at a time".
Could you explain in a lot more detail what you see (and don't say "it", say exactly what part of Lightroom or what part of your operating system you are looking at), or show us a screen capture? -
Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts. I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?
Hi Milrclan,
Thanks for contributing to the Apple Support Communities.
If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best Regards,
Jeremy
Maybe you are looking for
-
BlackBerry Web Development on 64-bit Windows 7
Hi , I am doing this project on Blackberry and right now I have 64-bit Windows 7 OS. So can anyone tell me the procedure to install the Blackberry storm 9500 simulator on my machine. Is it compatible with my machine configuration ? Are there any othe
-
15" Retina Macbook Pro won't login after 10.8.3 update failure
I just attempted to installing 10.8.3 on my Retina mbp and after failing I could no longer login. When attempting login, the screen would flash white then go back to the login screen. I was able to get to safe boot by holding the shift key during boo
-
The solution tabs on my email page(i.e.-"delete","check mail","compose",etc.)have disappeared on Firefox. They are still available on Internet Explorer, but I'd like to use Firefox!@ How can I get them back on Firefox? I have tried removing Firefox f
-
Adding to the selection of a current hue/saturation adjustment layer?
I made a selection on a car, used a Hue/Saturation adjustment layer to change that selected color, though I went and used the Magic Wand to add more to my selection and that new part of the selection is not affected by the previous Hue/Saturation adj
-
My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guys. One site still connects fine but the other one has stopped connecting. With the second site when I click on the button I get a