Very low 3DMarks03 benchmark with MSI Ti4200TD 4x GPU

Very low 3DMarks03 benchmark with MSI Ti4200TD 4x GPU
I have download the lastest demo version of 3DMarks03 from futuremark.com and have downloaded the latest DirectX 9.0 from Microsoft.
After downloading both applications, I have update my DirectX 9.0 first before installin 3DMarks03 in my com.
After all installation is done, I have test the Benchmark for my AGP card which is MSI's Ti-4200TD 4x 128MB and the results was worse than expectations.
The first test was ok and I managed to hit rather high points of nearly 200fps for it, but the problems starts at the second test onwards... I managed to only hit at the highest point of 15fps only!!! Therefore at the end of the Test I only managed to score 1018points... ;(   and my screen starts to flicker on occasions... but I have switched to 75Hz for my refresh rate... :O
And the very funny thing is that I have no problems driving games like Unreal Tournament 2003...  ?(
My first query here is whether there's anything to do with DirectX 9.0(I have de-activate and re-activate directdraw after each restart) or is it because that I did not reinstall the Card driver as in Settings> Advanced Options> DirectX version still shows DirectX 8.1 or better... By the way, the driver was the latest version which I've download from MSI website and I have switch of SBA already...
My next query is whether because 3DMarks03 or DirectX 9.0 is not yet digitally signed as DxDiag has prompt me to get my drivers signed or DirectX 9.0 and 3Dmarks03 are not updated yet to run on nVidia based cards as I know that all Radeon 9500Pro/9700 series comes with direct 9.0 drivers and not for nVidia cards?
Hope someone could assist me... Thanks!!!
Intel Pentium 4 2.4B Ghz with SSE2 533FSB
Abit SA7 SIS 654D 533FSB
512MB DDR333 Kingston Ram
5 Fans cooler system
400watts PSU
Maxtor 80GB Fluid Bearing with 2MB Buffer 7200RPM HDD
Seagate 10.2GB 5400RPM HDD
SAMSUNG CDRW ROM
MSI DVD ROM
PCI 56kbps Modem
SAMSUNG SyncMaster 753DF 75Hz refresh
nVidia driver version: 6.13.10.4107
VGA BIOS version: 4.25.00.29.00
MSI Ti-4200DT 128MB 4x AGP
SBA: disabled
Anti-Aliasing: 2x
Anisotropic - Filitering Off
Performance: Balanced

I've load and install all my motherboard drivers, SIS AGP driver ver 1.4 since my last format and before the installation of DirectX 9.0 and 3DMarks03...
Do I have to reinstall everything again? ?(

Similar Messages

  • Very Low 3dMark2001 score w/ MSI GeForce4 MX440SE-T

    HELP!!
    My System:
    AMD Athlon xp 2000+
    ASUS A7V333
    256 DDR 333MHz Kingston RAM(Latency 2.5)
    (MS-8878)MSI Geforce4 MX440SE-T
    And With that system I am getting very low scores about 4070 at 3Dmark2001 SE! It seems to me impossible, it is near to my old Geforce 2MX.
    I think there is some problem with my configuration, but yet I couldn't find anything.I tried alot of things, checked all drivers they are all up to date.(Via 4in1 drives:latest hyperion thing,NVidia WHQL certf. 40.72. etc..)I enabled fast write, enhanced agp performance control from bios and eveything I know from display settings i.e. Antialiasing disabled, d3d tweaked and still the problem persists.
    I need someone who can help me under these hard and strange conditions.. ?(

    I have to agree with sqersch, I've run at 60 mhz and got way more than 60 fps, refresh rate doesn't have alot to do with card performance.  Sure you get a fps boost when you increase the refresh rate but nothing significant and it certainly doesn't "cap" the frame rate, it can just improve it slightly.  Besides about the only thing you would want to increase the refresh rate for is so that it would be easier on the eyes, (less flicker).  As for the guy complaining about his benchmark, what exactly do you expect to get with an mx version of a geforce 4?  I'm not saying that score isn't wrong, just wondering what score you hope to achieve with an mx card.
    Geforce system specs:
    Msi Kt3 Ultra 2-R with amd athlon xp 2200+ (overclocked to 1.98)
    Msi geforce 4 ti4200 128 mb (overclocked to 300/590)
    512 mb ddr @333mhz
    Ac97 advance audio (crappy gotta get audigy!!!)
    3com 10/100 netcard
    Volcano 9 smartfan 2
    4X 3.5" case fan
    windows xp pro sp1

  • Very low microphone levels with soundblaster live

    Im trying to do some digital recording and my microphone levels are very low even when I have the microphone levels at maximum. Ive done all the windows xp trouble shooting but to no avail. I have tried two different microphones, both work well through amplifiers. Any suggestions?

    mattp65 wrote:
    Well, Im not sure. I open up the windows playback controls and then go to record control and I have the microphone bar at maximum. But by asking if it I have it up to 20 db I wonder if Im in the right control area because there are no units on this control bar. Am I in the right control panel?
    On Windows Play/Recording Controls the Mic +20dB boost option can be found behind the "Advanced" -button (below Mic level slider). On CT Surround Mixer it's behind the 'tiny red + sign', above the Microphone slider.
    jutapa

  • KT4 ULTRA SR very low HHD benchmarks

    I knew my old 60GB Maxtor Diamond 8 (2MB buffer) is pretty slow so I decided to buy 2 x WD800JB and run a RAID 0 system I have been long postponed. I havent decided what RAID card should I get yet -still working on it - so I wanted to see one of my new hard drives in action. I pluged it SLAVE into same IDE connector. I also know when 2 IDE work on 1 connector both work in same speed during file transfer. So my point is the benchmarks that Im getting WD800JD with 8MB buffer is worse than my old Maxtor Diamond 8. I even tried disabling SMART and stuff same. Regardless of getting worse scores from my old drive my overall HDD benchmarks are too low. Any suggestions???
    HDtag score
    ----Maxtor read:31.3 access time:12.9
    ----WD read:30.7 write:16.5 access time: 13.3

    1) it must be in the end otherwise its really har to plug 2 drives on 1 regular IDE cable!!! I still dont get why it makes a big difference while they are both ATA devices maybe I need enlightment!!!!!!
    2)Master and slave must be right otherwise PCs dont boot if MBs changed since I got my latest. I think I already told that both HDs are on the same IDE cable.
    3) I will be concidering RAID for a long time but Im not sure about the benefits will
    worth spending taht much money!!!
    4) Im not giving my AMPs and stuff since it has nothing to do with my problem I guess.
    but my main concern is Im using KT ULTRA SR bios v1.4 and I remember ppl complaning about slow IDE transfer rates after upgrading to 1.4. Can it be the reason??? Im not sure cause I cant see much of a slow down since I upgraded my bios 3-4 months ago!!!!

  • Macbook Air Microphone Volume Very Low

    I've had a few Facetime, Google+ Hangout, and Skype sessions with verious people and a common complaint is that the mic volume on my 2011 Macbook Air 13 is very low despite the gain being turned all the way up.  I found a thread where other people are experiencing this same issue.  I was hoping to get some feedback from others to see how common this issue is.  It would be interesting to see if it is in fact an issue with all Macbook Air's and could possibly be a driver or design issue.
    Other Thread: http://forums.macrumors.com/showthread.php?t=1204830

    Same issue (very low microphone volume) with my new 2011 Macbook Air 13".  I bought it the first day they were available from Apple Store, but just tried FaceTime today.  Volume not acceptable. 
    Looked at system preferences and slid slider all way to max... still not enough volume.  I had to put my head to the side within a few inches of microphone before the sound sort of was loud enough. Tried ambient off/on and worse when had it off.
    Just tested the sound with my niece's boyfriend new 11" model (he got about 1 week ago). Input volume on his unit is ideal.  Sounds great.  So not likely an Lion issue... likely something with my unit (and others based on this post and others).
    I have yet to find any solution on the forum or support area, so will call Apple tomorrow or visit store to see if they can resolve the problem.

  • Wifi very low connexion iPhone 4S iOS 8.1.2

    Hello,
    Since iOS 8.1.1 i have very low Wifi connexion with Freebox, update iOS 8.1.2 don't change anything
    i said forgot the network
    I did a network reset
    etc
    no change
    transfert in wifi mode is around 0,2 / 0.1 mbs  before iOS 8.1.1 it was 25/7 Mbs
    i have this problem only with freebox revolution from Free France
    Thierry

    iOS: Device not recognized in iTunes for OS X - Apple Support

  • First use, Very very low Vertex 2 120GB with MSI BigBang XPOWER

    HI,
    I've a big problem, I bought a new machine:
    MSI BIGBANG XPOWER
    SSD OCZ VERTEX 2 120GB
    WD VELOCIRAPTOR 300GB
    2X HITACHI 2TB
    COOLER MASTER SILENT GOLD 800 WATTS
    2X ASUS GTX560TI
    HAFX 942
    CORE i7 950
    12 GB DDR3 - ****** RIPJAWS
    NOCTUA for CPU
    I placed the ssd for first time in the first SataII slot to install Win7 64bits, the installation seems take much time, and when finished, the SSD seems to be more lower than a standard drive 5400tr/mn, you see that?? I can't move easily the mouse, she get blocked on move like when the CPU is used at 100%. Before installing Win7 I've activated the AHCI, and no i don't know what to do, please please help me, I can't resiste to destroy it, and sorry for my english.

    I've updated the SSD to 1.5, but haven't modify anything for may motherboard, no I try to install win7 64bits in my WD velociraptor and i got some problems, very very low system, I don't know what to do!

  • MSI KT3 Ultra2 very low record level 2

    i speak spanish, sorry.
    well, i have an MSI KT3 Ultra2 MS-6380E, but, the level of record y very low, with diferents michrofone, i know of computer, but i can´t have aceptable record, and when tild MIC BOOST the noise can´t use messenger by my modem transmit every time. I have microfone genius.
    your "mic boost option" insert noise?, (with microfone disconected )
    ¿chasis need ground conected? (i have not conected)
    ¿the mother is damaged?
    ¿i need an special michrofone?
    ¿ is noise of ventilator?
    thank you very much
    Walter
    Argentina
    Athlon XP 1800+, 256mb PC2700
    MSI KT3 Ultra 2 6380-E    AC97 Audio
    Maxtor 40gb 7200 Rpm DiamondPlus D740X ata 133 8,5ms
    Abit Siluro Geforce 4 MX440, DVD PIONER 16X,
    450watt Power Supply

    Did you mean you can't record a voice at a audible level ?

  • Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

    Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
    On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
    (I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

    Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

  • My Ipod, keeps on saying very low battery then restarting. then turning bright with the apple logo and going back to very low battery again.

    My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.

    If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
    And try here.   Troubleshooting iPhone hardware
    Powering Apple and third party peripherals through USB

  • [linux 3.0] Problem with sound : very low.

    Since I upgraded to linux 3.0, I noticed that sound is very very low. Even if gnome sound properties tells me it is set at 100%, I nearly cannot hear it at all.
    I got this in dmesg | tail :
    [fred@fredo-arch ~]$ dmesg | tail
    [   10.943927] NET: Registered protocol family 31
    [   10.943932] Bluetooth: HCI device and connection manager initialized
    [   10.943940] Bluetooth: HCI socket layer initialized
    [   10.943943] Bluetooth: L2CAP socket layer initialized
    [   10.944041] Bluetooth: SCO socket layer initialized
    [   10.981755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   19.925726] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [   20.203365] eth0: no IPv6 routers present
    [   22.618181] EXT4-fs (sda4): re-mounted. Opts: commit=0
    [   22.755787] EXT4-fs (sda5): re-mounted. Opts: commit=0
    If I plug an headset in the front on my PC, I got sound with the right power. Weird. Any tips ?

    same here. almost no sound at all (unless you have superman ears).
    00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
    sounds like a alsa problem?
    Edit:
    This fixed it:
    I closed kde's mixer then I opened alsamixer. I selected Master channel and pressed M on my keyboard to unmute.
    then I did "/etc/rc.d/alsa stop" to save the sound volume status. and then "/etc/rc.d/alsa start" and I opened kmix again.
    Last edited by hussam (2011-07-24 20:48:55)

  • Help with iPOD...  Please wait...  battery very low

    Hi everyone! i just got this message tonight on my iPod... It has a sad face, with an exclamation point, and it keeps going to a darker screen saying Please wait... battery very low... iTunes does not open, either, when the iPod is connected to the computer, as usual. Reset doesn't work, either. It keeps flashing from the white screen saying to go to apple.com/support/ipod, and the other one I mentioned above. H E L P

    http://discussions.apple.com/thread.jspa?threadID=1591975&tstart=0

  • Select single to RSEG with very low performance

    Hello experts,
    We have recently upgraded our sap basis from 701 to 740 and we are experiencing a very low performance with the following abap instruction:
    select single * from rseg into lw_rseg where ebeln = lw_output-pedido and
                                                                ebelp = lw_output-item and
                                                                kschl = lw_output-kschl.
    Could it be anything from the upgrade?
    Any suggestions?
    If we change the "*" for only one field of the RSEG table, would the improvement in te performance be significant?
    Thank you.
    Best regards,
    Raquel Oliveira

    Hi, Raquel!
    In SELECT statement you are not using the key fields for RSEG table.
    Replacing "*" by a single field won't do the trick.
    In our system we've got a table index on EBELN and EBELP fields in RSEG and it helps a lot.
    In case you don't want to set additional indexes you can find all incoming invoices for the purchasing document items in EKBE table and then go to RSEG having BELNR, GJAHR and BUZEI fields.
    If you already have table index on RSEG with EBELN & EBELP fields - you can trace SQL statement in ST05 and check whether it uses the index.
    And apart from that - anything can be from upgrade

Maybe you are looking for