Very Low Audio after Updating iPod wVideo 60 GB

After updating to latest software for iPod with video 60 GB, the audio on all of my songs is extremely low. I have to turn the volume nearly to max to hear at a modest level. I also get Zero bass now.
Any thoughts?
Thanks!

Thanks dude for the help, that's a very useful tip for many reasons.
It didn't resolve my problem and then I recalled that I have another set of headpones from my old iRiver. I plug those headphones (which were used excessively for 2 years) and my sound is instantly back.
Basically, iPod headphones (that I have had since November 2005) are totally shot. They are absolute crapola. Geeze, they might as well sell the **** things without headphones, just go straight to after-market set.

Similar Messages

  • IDT High Definition Audio CODEC v. 6.10.6395.​0 Upon installati​on I have very low audio output

    IDT High Definition Audio CODEC v. 6.10.6395.0.  5/21/ 2012
    Upon installation I have very low audio output!   Screen Shot    Screen Shot 2
        I have tried:
    un-installing and reinstalling the drivers.
    Installed the original drivers via HP's website sp53222 for my particular model.  HP  Pavilion HPE  h8-1070t
    Any suggestions? would be greatly appreciated.  It would appear IDT who I also emailed and they never responded is responsible for a codec pack that is not fully functional with this motherboard.
    was wir lieben meistens nicht kriegen

    Did you access the Catalyst Control Center in programs and look at the latest updates for your graphics card and make sure you didn't download the audio drivers they self install and are checked automatically each time you attempt an update for the card.
    Did you right click on the speaker in the system tray and go into recodring devices make sure everything is setup propper there sometimes they too can change.
    I'm familiar with cakewalk but never used it on Win7 its been many years since I played around with that. If you are using the onboard audio card and it has worked before and not now if I were in your situtation I would attempt to reisntall the dirvers via device manager they do sometimes become corrupt especially if you picked up any malware that was removed by your antivirus software due to the drivers and malware both reside inwindows\system32.
    After the reisntall of the drivers if the issue is not resolved I would upgrade the audio card with a  PCIe x1 component such as:
    Creative Labs SB1040 PCI Express Sound Blaster X-Fi Xtreme Audio Sound Card
     http://www.amazon.com/Creative-Labs-SB1040-Express​-Blaster/dp/B000W7PNZI/ref=sr_1_1?ie=UTF8&qid=1357​...
    After I paid for a real soundcard with Recording: 24-bit/96kHz and Sound Output Mode - 7.1 and bypassed my onboard audiocard I never had any issues again. My onbaord worked too in the begining for certain things than stopped mysteryously and the reinstallation became ineffective after a while so I decided the money for the tower was invested mainly in the CPU i7 the RAM and HDD.
    *** Note if you did install the audio drivers for the graphics card you will have to change the onboard audio in the BIOS from automattic to enabled. Otherwise you will have no sound at all. So never take the audio drivers for the graphics card unless you need them for DVR recording or something. The PCIe audio cards are never effected by this however only the onboard audio. Another reason onboard is a cheap way to go and HP bundles it as cheap as it can my friend.
    Good Luck again!
    was wir lieben meistens nicht kriegen

  • After updating iPod to iOS 5.0, cannot get into Game Center with previous nickname. It says my nickname is already in use by another account.  Why did this happen and how can I fix this with my old nickname and its data?

    After updating iPod Touch to iOs 5.0, I cannot get into Game Center with previous nickname.  The screen says my nickname is already in use by another account.  Why did this happen and how can I fix this so I can still use the same nickname?

    Did you haveany problem with updating to iOS 5? It soundsl like the update did not correctly restore from the backup that iTunes mnakes as the fisr step of the update.

  • After updating ipod touch to ios5 the ipod toch has stopped responding to work, can't even turn it off.it remains sync...when i connect to itunes it says error 0sE8000065. any solution?

    after updating ipod touch to ios 5 the ipod touch has stopped responding to work, can't even  turn it off. it remains sync.... when i connect to itunes it says error 0sE8000065. any solution?

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Also see:
    iOS: Not responding or does not turn oniOS: Not responding or does not turn on

  • HT4623 i downloaded iphone software but after updating ipod i seem to be asked to download again to update phone. what do i do to avoid downloading again, but update iphone

    i downloaded iphone software but after updating ipod i seem to be asked to download again to update phone. what do i do to avoid downloading again, but update iphone

    What specifically is the message saying?

  • Lost audio after update today

    Hp Pavillion dm4 
    Lost audio after update today, 2nd effin time this has happened, **bleep**?

    Hm.. I never have problems with audio in Windows 7..
    Just try this: 
    Please run the Sound troubleshooting tool by going to Control Panel -> Troubleshooting -> Troubleshoot audio playback -> follow the wizard to troubleshoot the issue.
    Regards,
    BBot

  • Very low audio quality after amber update

    After installing amber update audio quality and volume has dropped significantly! Volume through speakers is alot lower, and when plugged into headphones audio lacks quality and depth. There is barely any bass and volume is very low, sounds like listening to a clock radio very disappointing, as audio quality on my 920 was very very good the best of any phone so far before amber update!

    i haven't noticed that with my 920. have you tried performing a soft reset and also check that you are up to date with all the latest Nokia system app updates from the Store?

  • How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

    I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

    Have you read this post written by another forum member?
    The Sad iPod icon.
    However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • MacBook OSX 10.6.5 No audio after update

    Hello, My aluminum 13" MacBook has been fine up until a few weeks ago. The internal speakers do not work after Mac OSX 10.6.5 boots up. I hear the 'gong' on initial start up... but no audio after OSX boots. I have tried plugging in headphones, using a toothpick- nothing works. The sound preferences show 'Internal Speakers' and Built in.
    Another interesting fact is iTunes reports "an unknown error occurred -200". Very helpful message.
    If I boot into Windows Vista using BootCamp.. audio works just fine. So, the speakers and audio hardware are not malfunctioning. It's clearly an OSX configuration problem.
    Any ideas on what I can do to get my audio back? The only thing that has changed was I let Apple Updater install a few patches.

    If you have not already done so, run Disk Utility's "Verify Disk" & "Repair Permissions" routines on your startup drive (in that order). If the verify disk step finds any problems, you must correct them before continuing.
    Try creating a new, temporary user account. Restart your Mac, logging into that account only. If the speakers now work then something associated with your normal user account is the problem, such as a login item or bad preference file.
    If the speakers still don't work with this account, you can delete it. Then try starting up in Safe Mode. If the speakers now work something that Safe Mode disables is the culprit, such as a third party or non-essential extension, an add-on system modifier, startup item, etc.
    If none of the above help, try downloading & installing the 10.5.6 combo update. If that doesn't help then you may need to reinstall the OS & update it to the current version.

  • Why can I not change the title of the album name after updated ipod to ios 5?

    After updated my ipod to ios 5.0.1 i lost my music, so I got it back but I want to change the titles, artists, or album name.  So I right-click a song and then I click on get info and do all my changes, but whne I press ok, I look on my ipod and it didn't change.  What is wrong?  What do I do?

    Have you tried unsyncing the music and then resyncing?  You problem is very commom after iOS 5

  • Very low audio sound

    Its a hp pavilon dv6 notebook - serial # 5ch1311yvr - windows7 64 bit -I have tried all sound options I could find, one day the sound was working good and the next day very low volume, no new programs were installed ad no changes that I am aware of, and there are no error messages and all the test say that the sound card is working. Does anyone have any suggestions?

    Hi
    You have a couple of options as I see it.
    Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
    Try doing System restore to the date when the unit was working fine.
    Try to update the driver from hp.com website for Audio & Bios.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • P35 s611 very low audio

    i have the volume wheel at max and have reinstalled xp again. also updated realtek driver. checked the audio in control panel and it is full volume. both the speakers and the headphone jack output volume is very low. barely audible.
    and ideas?

    Satellite P35-S611 
    Double-click the speaker icon in the Notification area of the taskbar to open the volume controls.
    Click Properties on the Options menu and set all the items shown in Playback.
    Verify the Volume settings for them all.
    -Jerry

  • L430 - very low Audio output

    we have bought many L430 notebooks and with Windows 7 the audio output is very low... we have tried with both realtek and windows HD drivers but the result is poor out put...
    Solved!
    Go to Solution.

    Deinstall Dolby Advanced Audio and then Realtek Audio. Then try installing Realtek Audio drivers from your SWTOOLS folder, but DO NOT install Dolby Advanced Audio. See if there are any changes regarding your output level(s). If not, download Realtek Audio drivers from Lenovo Driver Matrix website (note: for me those drivers, 5/6/2013, are refusing to install - says "bad driver something something"), but DO NOT install Dolby Advanced Audio. See if there are any changes regarding your output level(s). In any case, be sure to (properly) deinstall Dolby Advanced Audio. I recently had problems with Dolby Advanced Audio after upgrading Realtek Audio drivers, and the only way to get sound working again was to install Realtek Audio drivers from SWTOOLS folder. I skipped Dolby AA altogether and everything is working fine. Also, worth mentioning, restart your computer after installing Realtek drivers. After restart, make sure your mic/volume mute buttons are working properly.
    T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
    L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit

  • Itunes Error After Updating Ipod

    I'm having trouble with Itunes - after it updates the Ipod it gives a fatal error ("can't read memory"). If I click "OK" Itunes closes. It does appear to be updating the Ipod.
    Here's the basics of what I have:
    -ipod model MA146LL (5th gen video)
    -Windows
    -Version 1.2.1 (on ipod)
    Itunes
    -7.0.2.16
    Here's the thing that caused the problem:
    -Plugged in ipod to computer via usb
    -It auto-launched itunes
    -told me an upgrade was available for my ipod - do i want to install 1.2.1 I said yes.
    -Updated the ipod with new firmware, and get error message in itunes
    Here's the things I've tried to fix it:
    -checked ipod and it had 1.2.1 as version
    -unplugged ipod from computer, reconnected, it launched itunes, updated ipod and gave error message
    -rebooted computer - same error
    -did regsvr32 on file in program files\itunes (something I found while searching discussion groups) - same error
    -reset ipod and tried again - same error
    -repaired itunes (via add/remove programs) and rebooted - same error
    -validated that it actually is updating the ipod (is, removed a few songs and it did)
    Any help would be appreciated.
    Thanks.

    Nope, no plug-ins.
    I figured it out - here's the story:
    I realized that although I got a fatal message, iTunes was still there, and as long as I didn't hit the OK on the message, I could still work in iTunes (I realized this could have screwed things up worse...but...). I Restored the Ipod. Got the same error. Even rebooted the machine and reset the ipod again. Same error.
    Then I figured, forget it, I'll just use it with the error message. But, now that I restored my ipod I noticed the Contacts were blank (I'm synching with MS Outlook Contacts). I tried updating the ipod again, couldn't get the contacts. Then I remembered that since getting this new machine my contacts have been screwy in Outlook (click To: to get address list and it can't find it). I fixed that (removed the Outlook address book service and re-added). Went back to itunes to sync and it synched the contacts just fine.
    And ... it no longer gives me the error message. So, the error with MS Outlook contacts is what the problem was all along. I'm thinkin.
    Thanks for your time and quick reply....

  • Problems with Audio after update to Firmware 2.1

    Dear Blackberry users
    Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
    Pairing is okay, but the audio stream comes with no volume.
    Urgent help would be welcome . Thank you.
    Clemens Heddier/Germany

    I dont have my BT gateway with me but will test tonight.
    Have you tried removing the pairing and pair it again?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Maybe you are looking for