VERY LOW cpu usage & memory, fans incessantly spinning / system very slow
Just did a clean install of Mac OSX 10.8 3 days ago to try and deal with this fan problem.
Updated to 10.8.4 today.
My Early 2011 Macbook Pro with 16GB RAM was running very hot with fans spinning constantly and all that with nothing going on. But it wasn't slow.
I had tried everything I could find to as afr as SMC resets and things like that.
Now, a week after the clean install, the system is superslow, the fans come on for no apparenmt reason for an hour and then go off. Off, on, off on. Nonstop.
And forget about all my files on my external drives, I can't get anything off of them mosty of the time.
Error -2, Error -50, Error -36, Error -3, etc... etc...
My free RAM hasn't gone below 10GB free but I'm getting page/out s a bunch and out of nowwhere it will grind to a halt for no reason. I've run test after test to check teh hardware, to no avail...
Also Archive.app keeps saying that .Zip restore (from Backblaze) files I'm downloading are damaged and can't be opened.
Something very wrong and I'm assuming hardware, but can't find anything. Any advice?
A lot of this 10.8.4 coreaudio bug, so Included a few more...
6/6/13 10:14:49.951 AM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=162
6/6/13 10:14:49.951 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:49.951 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:49.951 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:49.951 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:49.951 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:49.951 AM NotificationCenter[229]: Connection interrupted.
6/6/13 10:14:50.043 AM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=152
6/6/13 10:14:50.148 AM com.apple.launchd.peruser.501[175]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 5 seconds
6/6/13 10:14:50.224 AM airportd[638]: _doAutoJoin: Already associated to “SDC”. Bailing on auto-join.
6/6/13 10:14:51.604 AM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=162
6/6/13 10:14:51.607 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:51.608 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:51.608 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:51.608 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:51.608 AM WindowServer[114]: CGXGetConnectionProperty: Invalid connection 56579
6/6/13 10:14:51.670 AM com.apple.kextd[12]: Error reconsidering volume /Volumes/DOZ.
6/6/13 10:14:51.670 AM shutdown[651]: reboot by Diogenes:
6/6/13 10:14:51.670 AM shutdown[651]: SHUTDOWN_TIME: 1370538891 670324
6/6/13 12:32:47.000 PM bootlog[0]: BOOT_TIME 1370547167 0
6/6/13 12:33:20.000 PM kernel[0]: PMAP: PCID enabled
6/6/13 12:33:20.000 PM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
6/6/13 12:33:20.000 PM kernel[0]: vm_page_bootstrap: 4014589 free pages and 146947 wired pages
6/6/13 12:33:20.000 PM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
6/6/13 12:33:20.000 PM kernel[0]: zone leak detection enabled
6/6/13 12:33:20.000 PM kernel[0]: standard timeslicing quantum is 10000 us
6/6/13 12:33:20.000 PM kernel[0]: standard background quantum is 2500 us
6/6/13 12:33:20.000 PM kernel[0]: mig_table_max_displ = 74
6/6/13 12:33:20.000 PM kernel[0]: TSC Deadline Timer supported and enabled
6/6/13 12:33:20.000 PM kernel[0]: corecrypto kext started!
6/6/13 12:33:20.000 PM kernel[0]: Running kernel space in FIPS MODE
6/6/13 12:33:20.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
6/6/13 12:33:20.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
6/6/13 12:33:20.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
6/6/13 12:33:20.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
6/6/13 12:33:20.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
6/6/13 12:33:20.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
6/6/13 12:33:20.000 PM kernel[0]: calling mpo_policy_init for Sandbox
6/6/13 12:33:20.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
6/6/13 12:33:20.000 PM kernel[0]: calling mpo_policy_init for Quarantine
6/6/13 12:33:20.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
6/6/13 12:33:20.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
6/6/13 12:33:20.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
6/6/13 12:33:20.000 PM kernel[0]: MAC Framework successfully initialized
6/6/13 12:33:20.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
6/6/13 12:33:20.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
6/6/13 12:33:20.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
6/6/13 12:33:20.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
6/6/13 12:33:20.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 88AB
6/6/13 12:33:20.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
6/6/13 12:33:20.000 PM kernel[0]: [ PCI configuration begin ]
6/6/13 12:33:20.000 PM kernel[0]: console relocated to 0xfd0010000
6/6/13 12:33:20.000 PM kernel[0]: PCI configuration changed (bridge=16 device=5 cardbus=0)
6/6/13 12:33:20.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 18 ]
6/6/13 12:33:20.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe09bb90; max speed s800.
6/6/13 12:33:20.000 PM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
6/6/13 12:32:48.665 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
6/6/13 12:33:20.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
6/6/13 12:33:20.000 PM kernel[0]: rooting via boot-uuid from /chosen: 99E37246-A3C5-32EF-87CC-1F8C9E3C744E
6/6/13 12:33:20.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
6/6/13 12:33:20.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
6/6/13 12:33:20.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
6/6/13 12:33:20.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
6/6/13 12:32:48.665 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
6/6/13 12:33:20.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
6/6/13 12:33:20.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
6/6/13 12:32:55.662 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
6/6/13 12:33:20.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartitionScheme/Macintosh HD@2
6/6/13 12:33:20.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 4
6/6/13 12:33:20.000 PM kernel[0]: BTCOEXIST off
6/6/13 12:33:20.000 PM kernel[0]: BRCM tunables:
6/6/13 12:33:20.000 PM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
6/6/13 12:33:20.000 PM kernel[0]: Kernel is LP64
6/6/13 12:33:20.000 PM kernel[0]: USBMSC Identifier (non-unique): 20130405010747 0x480 0xa006 0x107
6/6/13 12:33:20.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
6/6/13 12:33:20.931 PM hidd[43]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
6/6/13 12:33:21.000 PM kernel[0]: macx_swapon SUCCESS
6/6/13 12:33:22.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:02:d1:95
6/6/13 12:33:22.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address e4:ce:8f:41:68:4e
6/6/13 12:33:22.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
6/6/13 12:33:22.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
6/6/13 12:33:24.540 PM appleeventsd[49]: main: Starting up
6/6/13 12:33:24.929 PM com.apple.SecurityServer[27]: Session 100000 created
6/6/13 12:33:25.000 PM kernel[0]: Previous Shutdown Cause: 5
6/6/13 12:33:25.000 PM kernel[0]: AGC: 3.4.5, HW version=1.9.23, flags:0, features:20600
6/6/13 12:33:25.000 PM kernel[0]: IOBluetoothUSBDFU::probe
6/6/13 12:33:25.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
6/6/13 12:33:25.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
6/6/13 12:33:25.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
6/6/13 12:33:25.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
6/6/13 12:33:25.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
6/6/13 12:33:25.000 PM kernel[0]: AMDTurksGraphicsAccelerator: ** Device in slot: SLOT--1 **
6/6/13 12:33:25.102 PM hidd[43]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
6/6/13 12:33:25.417 PM mDNSResponder[36]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
6/6/13 12:33:25.000 PM kernel[0]: DSMOS has arrived
6/6/13 12:33:26.291 PM airportd[76]: _processDLILEvent: en1 attached (down)
6/6/13 12:33:26.000 PM kernel[0]: createVirtIf(): ifRole = 1
6/6/13 12:33:26.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
6/6/13 12:33:26.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8028b94800
6/6/13 12:33:26.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
6/6/13 12:33:26.000 PM kernel[0]: Created virtif 0xffffff8028b94800 p2p0
6/6/13 12:33:26.567 PM com.apple.usbmuxd[21]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
6/6/13 12:33:27.221 PM com.apple.SecurityServer[27]: Entering service
6/6/13 12:33:27.000 PM kernel[0]: fsevents: watcher bzserv (pid: 58) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
6/6/13 12:33:27.969 PM coreservicesd[65]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
6/6/13 12:33:28.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
6/6/13 12:33:28.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
6/6/13 12:33:28.250 PM configd[51]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
6/6/13 12:33:28.251 PM configd[51]: DHCP en1: INIT transmit failed
6/6/13 12:33:28.696 PM configd[51]: network changed.
6/6/13 12:33:28.697 PM configd[51]: setting hostname to "APTTP.local"
6/6/13 12:33:30.040 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
6/6/13 12:33:31.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
6/6/13 12:33:31.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
6/6/13 12:33:32.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6741
6/6/13 12:33:32.410 PM apsd[56]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
6/6/13 12:33:32.411 PM apsd[56]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
6/6/13 12:33:35.082 PM systemkeychain[89]: done file: /var/run/systemkeychaincheck.done
6/6/13 12:33:35.179 PM configd[51]: network changed: DNS*
6/6/13 12:33:35.274 PM WindowServer[94]: Server is starting up
6/6/13 12:33:35.392 PM aosnotifyd[110]: bootstrap_look_up failed (44e)
6/6/13 12:33:35.000 PM kernel[0]: MacAuthEvent en1 Auth result for: a4:17:31:67:8f:7b MAC AUTH succeeded
6/6/13 12:33:35.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
6/6/13 12:33:35.000 PM kernel[0]: AirPort: Link Up on en1
6/6/13 12:33:35.000 PM kernel[0]: en1: BSSID changed to a4:17:31:67:8f:7b
6/6/13 12:33:35.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
6/6/13 12:33:35.463 PM mDNSResponder[36]: D2D_IPC: Loaded
6/6/13 12:33:35.463 PM mDNSResponder[36]: D2DInitialize succeeded
6/6/13 12:33:35.000 PM kernel[0]: AirPort: RSN handshake complete on en1
6/6/13 12:33:35.651 PM loginwindow[39]: Login Window Application Started
6/6/13 12:33:35.720 PM awacsd[54]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
6/6/13 12:33:35.806 PM awacsd[54]: InnerStore CopyAllZones: no info in Dynamic Store
6/6/13 12:33:35.997 PM locationd[40]: NOTICE,Location icon should now be in state 0
6/6/13 12:33:36.050 PM WindowServer[94]: Session 256 retained (2 references)
6/6/13 12:33:36.050 PM WindowServer[94]: Session 256 released (1 references)
6/6/13 12:33:36.789 PM digest-service[124]: label: default
6/6/13 12:33:36.789 PM digest-service[124]: dbname: od:/Local/Default
6/6/13 12:33:36.789 PM digest-service[124]: mkey_file: /var/db/krb5kdc/m-key
6/6/13 12:33:36.789 PM digest-service[124]: acl_file: /var/db/krb5kdc/kadmind.acl
6/6/13 12:33:36.872 PM digest-service[124]: digest-request: uid=0
6/6/13 12:33:36.957 PM WindowServer[94]: Session 256 retained (2 references)
6/6/13 12:33:36.958 PM WindowServer[94]: init_page_flip: page flip mode is on
6/6/13 12:33:37.193 PM airportd[76]: _doAutoJoin: Already associated to “SDC”. Bailing on auto-join.
6/6/13 12:33:37.829 PM rpcsvchost[126]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
6/6/13 12:33:37.913 PM digest-service[124]: digest-request: init request
6/6/13 12:33:37.946 PM digest-service[124]: digest-request: init return domain: BUILTIN server: APTTP
6/6/13 12:33:38.319 PM com.apple.launchd[1]: (com.apple.netbiosd[97]) Exited abnormally: Hangup: 1
6/6/13 12:33:38.536 PM WindowServer[94]: mux_initialize: Mode is dynamic
6/6/13 12:33:38.593 PM WindowServer[94]: GLCompositor enabled for tile size [256 x 256]
6/6/13 12:33:38.593 PM WindowServer[94]: CGXGLInitMipMap: mip map mode is on
6/6/13 12:33:38.634 PM fseventsd[44]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x102ec2518)
6/6/13 12:33:38.635 PM fseventsd[44]: log dir: /Volumes/DOZ/.fseventsd getting new uuid: 2445B465-6AB3-4174-9FA3-2E6F7F0EF3AE
6/6/13 12:33:38.680 PM Data Backup[132]: Starting Data Backup Executor Daemon
6/6/13 12:33:38.883 PM WindowServer[94]: WSMachineUsesNewStyleMirroring: false
6/6/13 12:33:38.884 PM WindowServer[94]: Display 0x042728c0: GL mask 0x9; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
6/6/13 12:33:38.884 PM WindowServer[94]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
6/6/13 12:33:38.884 PM WindowServer[94]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
6/6/13 12:33:38.886 PM WindowServer[94]: Created shield window 0x5 for display 0x042728c0
6/6/13 12:33:38.886 PM WindowServer[94]: Created shield window 0x6 for display 0x003f003e
6/6/13 12:33:38.886 PM WindowServer[94]: Created shield window 0x7 for display 0x003f003d
6/6/13 12:33:38.906 PM WindowServer[94]: Display 0x042728c0: GL mask 0x9; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
6/6/13 12:33:38.906 PM WindowServer[94]: Display 0x003f003e: GL mask 0x4; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
6/6/13 12:33:38.906 PM WindowServer[94]: Display 0x003f003d: GL mask 0x2; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
6/6/13 12:33:38.906 PM WindowServer[94]: CGXPerformInitialDisplayConfiguration
6/6/13 12:33:38.906 PM WindowServer[94]: Display 0x042728c0: MappedDisplay Unit 0; Alias(0, 0x9); Vendor 0x610 Model 0x9ca3 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
6/6/13 12:33:38.906 PM WindowServer[94]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
6/6/13 12:33:38.907 PM WindowServer[94]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
6/6/13 12:33:38.907 PM WindowServer[94]: CGXMuxBoot: Boot normal
6/6/13 12:33:39.013 PM apsd[56]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
6/6/13 12:33:40.791 PM WindowServer[94]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, accelerator 0x000042c3, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
6/6/13 12:33:40.792 PM WindowServer[94]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
6/6/13 12:33:40.792 PM WindowServer[94]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, accelerator 0x0000472b, unit 3, caps QEX|QGL|MIPMAP, vram 451 MB
6/6/13 12:33:40.825 PM fseventsd[44]: Logging disabled completely for device:1: /Volumes/Recovery HD
6/6/13 12:33:41.639 PM WindowServer[94]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
6/6/13 12:33:41.641 PM WindowServer[94]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
6/6/13 12:33:41.647 PM WindowServer[94]: Received display connect changed for display 0x42728c0
6/6/13 12:33:41.669 PM loginwindow[39]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
6/6/13 12:33:41.670 PM WindowServer[94]: CGXMuxAcknowledge: Posting glitchless acknowledge
6/6/13 12:33:41.686 PM WindowServer[94]: Received display connect changed for display 0x42728c0
6/6/13 12:33:41.686 PM WindowServer[94]: Received display connect changed for display 0x3f003d
6/6/13 12:33:41.687 PM WindowServer[94]: Received display connect changed for display 0x3f003e
6/6/13 12:33:41.713 PM WindowServer[94]: Unable to open IOHIDSystem (e00002bd)
6/6/13 12:33:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
6/6/13 12:33:42.012 PM WindowServer[94]: Created shield window 0x8 for display 0x042728c0
6/6/13 12:33:42.013 PM WindowServer[94]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/6/13 12:33:42.013 PM WindowServer[94]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/6/13 12:33:42.039 PM launchctl[158]: com.apple.findmymacmessenger: Already loaded
6/6/13 12:33:42.048 PM WindowServer[94]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/6/13 12:33:42.225 PM com.apple.SecurityServer[27]: Session 100004 created
6/6/13 12:33:42.238 PM configd[51]: network changed: v4(en1+:192.168.0.9) DNS+ Proxy+ SMB
6/6/13 12:33:42.340 PM UserEventAgent[11]: Captive: en1: Not probing 'SDC' (protected network)
6/6/13 12:33:42.343 PM configd[51]: network changed: v4(en1!:192.168.0.9) DNS Proxy SMB
6/6/13 12:33:43.274 PM UserEventAgent[159]: cannot find useragent 1102
6/6/13 12:33:43.490 PM airportd[76]: _doAutoJoin: Already associated to “SDC”. Bailing on auto-join.
6/6/13 12:33:43.675 PM ntpd[107]: proto: precision = 1.000 usec
6/6/13 12:33:43.931 PM hidd[43]: CGSShutdownServerConnections: Detaching application from window server
6/6/13 12:33:43.931 PM hidd[43]: CGSDisplayServerShutdown: Detaching display subsystem from window server
6/6/13 12:33:44.014 PM loginwindow[39]: Login Window Started Security Agent
6/6/13 12:33:45.209 PM SecurityAgent[170]: This is the first run
6/6/13 12:33:45.209 PM SecurityAgent[170]: MacBuddy was run = 0
6/6/13 12:33:45.280 PM SecurityAgent[170]: User info context values set for Diogenes
6/6/13 12:33:47.175 PM loginwindow[39]: Login Window - Returned from Security Agent
6/6/13 12:33:47.206 PM loginwindow[39]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
6/6/13 12:33:47.256 PM loginwindow[39]: USER_PROCESS: 39 console
6/6/13 12:33:47.275 PM airportd[76]: _doAutoJoin: Already associated to “SDC”. Bailing on auto-join.
6/6/13 12:33:47.503 PM com.apple.launchd.peruser.501[173]: (com.apple.gamed) Ignored this key: UserName
6/6/13 12:33:47.503 PM com.apple.launchd.peruser.501[173]: (com.apple.gamed) Ignored this key: GroupName
6/6/13 12:33:47.504 PM com.apple.launchd.peruser.501[173]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
6/6/13 12:33:47.509 PM loginwindow[39]: Connection with distnoted server was invalidated
6/6/13 12:33:47.521 PM distnoted[179]: # distnote server agent absolute time: 61.147167271 civil time: Thu Jun 6 12:33:47 2013 pid: 179 uid: 501 root: no
6/6/13 12:33:49.092 PM Little Snitch Agent[182]: Little Snitch Agent version 3926 started.
6/6/13 12:33:49.368 PM blued[53]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
6/6/13 12:33:49.403 PM WindowServer[94]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
6/6/13 12:33:49.441 PM WindowServer[94]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/6/13 12:33:49.885 PM talagent[189]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
6/6/13 12:33:49.885 PM talagent[189]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
6/6/13 12:33:50.784 PM awacsd[54]: Exiting
6/6/13 12:33:52.026 PM UserEventAgent[178]: cannot find fw daemon port 1102
6/6/13 12:33:52.230 PM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
6/6/13 12:33:53.473 PM SystemUIServer[194]: MenuCracker 2.2 (/Library/Application Support/iStat Menus 4/extras/MenuCracker.menu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras.
6/6/13 12:33:53.474 PM SystemUIServer[194]: failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat Menus 4/extras/MenuCracker.menu> (loaded)
6/6/13 12:33:53.474 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusDateAndTimes".
6/6/13 12:33:53.530 PM Little Snitch Network Monitor[196]: Little Snitch Network Monitor version 3926 started.
6/6/13 12:34:05.592 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusNetwork".
6/6/13 12:34:06.680 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusBattery".
6/6/13 12:34:06.990 PM apsd[56]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
6/6/13 12:34:07.242 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusDisks".
6/6/13 12:34:07.424 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[163]) Exit timeout elapsed (20 seconds). Killing
6/6/13 12:34:07.882 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusCPU".
6/6/13 12:34:08.354 PM NetworkBrowserAgent[226]: Starting NetworkBrowserAgent
6/6/13 12:34:08.548 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusTemps".
6/6/13 12:34:09.185 PM SystemUIServer[194]: MenuCracker: Allowing "iStatMenusMemory".
6/6/13 12:34:09.846 PM SystemUIServer[194]: Could not load menu extra NSBundle </Library/Application Support/iStat Menus 4/extras/MenuCracker.menu> (loaded) for Class (null)
6/6/13 12:34:11.308 PM com.apple.time[178]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/6/13 12:34:11.808 PM WindowServer[94]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
6/6/13 12:34:12.100 PM storeagent[217]: CKSoftwareMap: waitUntilMapIsLoadedAndPerformBlock:onDispatchQueue: timed out waiting for mdSemaphore
6/6/13 12:34:20.720 PM WindowServer[94]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 9.91 seconds (server forcibly re-enabled them after 1.00 seconds)
6/6/13 12:34:20.723 PM SystemUIServer[194]: iStat Menus loading extra - time
6/6/13 12:34:20.981 PM com.apple.time[178]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/6/13 12:34:21.105 PM com.apple.time[178]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/6/13 12:34:21.325 PM SystemUIServer[194]: iStat Menus loading extra - network
6/6/13 12:34:21.490 PM SystemUIServer[194]: iStat Menus loading extra - battery
6/6/13 12:34:21.670 PM SystemUIServer[194]: iStat Menus loading extra - diskusage
6/6/13 12:34:21.734 PM SystemUIServer[194]: iStat Menus loading extra - cpu
6/6/13 12:34:22.212 PM SystemUIServer[194]: iStat Menus loading extra - sensors
6/6/13 12:34:22.359 PM SystemUIServer[194]: iStat Menus loading extra - memory
6/6/13 12:34:26.447 PM WindowServer[94]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
6/6/13 12:34:32.356 PM com.apple.launchd.peruser.501[173]: (com.apple.afpstat-qfa[258]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
6/6/13 12:34:32.356 PM com.apple.launchd.peruser.501[173]: (com.apple.afpstat-qfa[258]) Job failed to exec(3) for weird reason: 2
6/6/13 12:34:33.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=261[GoogleSoftwareUp] clearing CS_VALID
6/6/13 12:34:33.253 PM iStatMenusAgent[262]: Loading istat menus agent
6/6/13 12:34:33.264 PM iStatMenusAgent[262]: iStat Menus Agent version 4.05 (423)
6/6/13 12:34:34.114 PM com.apple.launchd.peruser.501[173]: (com.apple.mrt.uiagent[250]) Exited with code: 255
6/6/13 12:34:36.906 PM 1PasswordAgent[263]: Starting 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
6/6/13 12:34:37.054 PM GoogleSoftwareUpdateDaemon[276]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
6/6/13 12:34:37.163 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
6/6/13 12:34:37.172 PM 1PasswordAgent[263]: Trying to load Localizable.strings [English] from the main bundle
6/6/13 12:34:37.279 PM 1PasswordAgent[263]: Cannot find English version, using English localization for Localizable.strings
6/6/13 12:34:37.318 PM GoogleSoftwareUpdateDaemon[276]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
6/6/13 12:34:37.540 PM com.apple.SecurityServer[27]: Session 100008 created
6/6/13 12:34:37.597 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0xa92bf20
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0xa92be40 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2013-06-04 14:35:27
>
Using server: <KSOmahaServer:0x5d3f1b0
engine=<KSDaemonUpdateEngine:0x952c320>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Chrome" = {
LastActiveDate = 2013-06-06 14:56:31 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
"com.google.Keystone" = {
LastActiveDate = 2013-06-06 19:34:35 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
"com.google.talkplugin" = {
LastActiveDate = 2013-06-06 07:51:12 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.4_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
6/6/13 12:34:37.701 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x952e170
server=<KSOmahaServer:0x5d3f1b0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.4_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="2" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
6/6/13 12:34:38.233 PM Memory Clean[275]: Receipt at /Applications/Memory Clean.app/Contents/_MASReceipt/receipt Ok!
6/6/13 12:34:38.792 PM Memory Clean[275]: This app has been run 10 times
6/6/13 12:34:41.596 PM WindowServer[94]: CGXDisableUpdate: UI updates were forcibly disabled by application "SuperDuper!" for over 1.00 seconds. Server has re-enabled them.
6/6/13 12:34:41.599 PM WindowServer[94]: reenable_update_for_connection: UI updates were finally reenabled by application "SuperDuper!" after 1.00 seconds (server forcibly re-enabled them after 1.00 seconds)
6/6/13 12:34:42.031 PM 1PasswordAgent[263]: reloadAllObjects
6/6/13 12:34:42.198 PM 1PasswordAgent[263]: Database (AGHtmlDatabase:file://localhost/Users/Diogenes/Library/Application%20Support/1 Password/1Password.agilekeychain/) load time [Cache]: 0.166+0.000 (103 objects)
6/6/13 12:34:43.059 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x5d47b20
server=<KSOmahaServer:0x5d3f1b0>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="45282"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
6/6/13 12:34:43.477 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
6/6/13 12:34:43.571 PM GoogleSoftwareUpdateDaemon[276]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
6/6/13 12:34:43.572 PM GoogleSoftwareUpdateDaemon[276]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
6/6/13 12:34:43.573 PM GoogleSoftwareUpdateDaemon[276]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
6/6/13 12:34:43.576 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
6/6/13 12:34:43.768 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
6/6/13 12:34:43.770 PM GoogleSoftwareUpdateDaemon[276]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
6/6/13 12:34:44.115 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x6d33890
productID=com.google.talkplugin
version=3.19.1.13088
xc=<KSPathExistenceChecker:0x6d331c0 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2013-06-04 14:35:27
>,
<KSTicket:0x6d33130
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x6d2cfb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2013-06-04 14:35:27
>
Using server: <KSOmahaServer:0x6d2ec80
engine=<KSDaemonUpdateEngine:0x952c320>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Chrome" = {
LastActiveDate = 2013-06-06 14:56:31 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
"com.google.Keystone" = {
LastActiveDate = 2013-06-06 19:34:35 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
"com.google.talkplugin" = {
LastActiveDate = 2013-06-06 07:51:12 +0000;
LastActivePingDate = 2013-06-06 07:00:00 +0000;
LastRollCallPingDate = 2013-06-06 07:00:00 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.4_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
6/6/13 12:34:44.117 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x6d33490
server=<KSOmahaServer:0x6d2ec80>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.4_i486"></o:os>
<o:app appid="com.google.talkplugin" version="3.19.1.13088" lang="en-us" installage="2" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="2" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
6/6/13 12:34:46.669 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x6936280
server=<KSOmahaServer:0x6d2ec80>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="45286"></daystart>
<app appid="com.google.talkplugin" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
6/6/13 12:34:46.673 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
6/6/13 12:34:46.691 PM GoogleSoftwareUpdateDaemon[276]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
6/6/13 12:34:46.692 PM GoogleSoftwareUpdateDaemon[276]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
6/6/13 12:34:46.693 PM GoogleSoftwareUpdateDaemon[276]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
6/6/13 12:34:46.695 PM GoogleSoftwareUpdateDaemon[276]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
6/6/13 12:34:53.004 PM GoogleSoftwareUpdateDaemon[276]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
6/6/13 12:34:53.601 PM DGAgent[259]: Resolved DG link from bookmark. /Applications/Drive Genius 3.app
6/6/13 12:34:54.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 309) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
6/6/13 12:35:04.647 PM warmd[20]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke_0:2321] Unable to open i386 shared cache: 2 No such file or directory
6/6/13 12:35:07.055 PM GoogleSoftwareUpdateDaemon[276]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
6/6/13 12:35:10.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=331[ksadmin] clearing CS_VALID
6/6/13 12:35:13.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=332[ksadmin] clearing CS_VALID
6/6/13 12:35:15.024 PM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationReady to notificationID=222
6/6/13 12:35:15.027 PM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=125
6/6/13 12:35:15.039 PM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyLaunchFinished to notificationID=125
6/6/13 12:35:15.082 PM coreservicesd[65]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyLaunchFinished to notificationID=100
6/6/13 12:35:23.102 PM coreaudiod[197]: Disabled automatic stack shots because audio IO is active
6/6/13 12:35:32.250 PM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
6/6/13 12:35:32.299 PM VDCAssistant[377]: AVF encoder error: fail to create accelerator instance
6/6/13 12:35:50.708 PM Google Chrome[328]: Inconsistent set of values to create NSBitmapImageRep
6/6/13 12:35:50.709 PM Google Chrome[328]: It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil. This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug. This will be logged only once. This may break in the future.
6/6/13 12:36:18.666 PM coreaudiod[197]: Disabled automatic stack shots because audio IO is active
6/6/13 12:36:28.166 PM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
6/6/13 12:38:49.335 PM talagent[189]: PersistentUI: CSBackupSetItemExcluded() failed with OSStatus -61
Similar Messages
-
Finder has heavy CPU usage: Causing fan to spin constantly
Hi,
I recently upgraded to Leopard. The upgrade went perfectly. The only thing thats annoying me is that the FINDER is causing heavy CPU usage which is causing my MacBook's fan to spin constantly. I've figured out that the problem is most likely FINDER from the Activity Monitor (I've found that stopping finder eventually causes the fans to spin down and eventually stop.)
Are other people having this problem, let me know? Is apple aware of this problem and will they fix it?
Message was edited by: abbiehoffmanHi
I'm not sure whether this helps, but I've noticed that having icon preview switched on (View - Show View Options) can result in a significant amount of CPU usage if you open a folder containing a large number of files, or a small number of movie files etc. On my older Mac, opening a folder containing a handful of WMV files can result in 20 seconds of 50% CPU usage, as it attempts to replace each generic icon with a content specific icon. I have a hunch it's actually opening QuickTime (and Flip4Mac) transparently in the background to capture a frame from each movie and use it as the icon. In the end I switched icon preview off - by default it seems to be on in Leopard. I guess it's most likely to affect older Macs and laptops, in terms of the CPU percentage required. It also seems to result in a fair bit of disk activity as well, again most likely to affect laptops. -
Kernel_task high cpu usage, high fan speed, and low cpu tempterature
Hi,
I've noticed that a lot of people have been having trouble with the kernel_task process, but I couldn't quite find a situation similar to mine (most seem temperature related).
Here is the situation (15' MBP, mid-2010):
- on boot (while the apple logo is shown), the fans speed suddenly jumps, and stays there, even if the computer has been off for a while.
- boot takes a little over a minute, which is considerably slower than what I was used to before today
- when finally started-up, the activity monitors shows kernel_task using between 160-180% of the CPU!
- temperatures are shown to be around 30C, except for the mem controller at 40C (still very low temp), but the fan speed is arround 6000rpm for both fans.
- this happened out of nowhere, as I woke the mpb from sleep this morning.
Since then I've tried:
- multiple reboots
- install all updates
- uninstall flash player (some people where having trouble with that)
- empty the system cache with Onyx (reported as a cause of slow boot)
- reset PRAM
- reset SMC
- put some ice packs under the mpb to cool things even further!
And so far, nothing has worked! I've had this laptop for 1 year, and nothing had ever failed. I upgraded to lion a few weeks ago, and everything had been working fine since the upgrade. This really happened out of nowhere, and none of the many forums I have read could offer a solution, and cals to apple support do not seem to yield better results (though I scheduled a call with them at 9am this morning, we'll see).
Has anyone had a similar set of problems?
I appreciate any help or advice you may have!
Thanks!
-SebastienI have the same issue (2.66 2010 MBP Hi-Res Anti Glare.)
I took it to Apple Store Covent Garden, JUST within warranty.
18 days later my machine has a new Main Logic borad, heat sensors, top case, palm rest. etc.
I turned it on.
The fans kicked in. All processors at 50%, big ole kernal task.
I took it back, geniuses rest SMC and tested it under load and it was fine.
weirdly it failed diagnostics at first but then seemed fine
I came home. Fans kicked in...
I took it back. Diagnostics failed heat sensors again
Replaced logic board and heats sensors again, but more carefully this time just in case, tested again.
I took it home. FANS FANS FANS.
Last time I was in the store I was told my machine was fine and had been thoroughly tested.
In mac store, no fans.
I erased hard drive and clean installed Lion
FANS
I replaced hard drive with OCZ SSD, clean LION.
Fans
Software update
SMC
PRAM
permissions
Onyx complete clean/maintenace
FANS/CPU
switched back to Snow Leopard SSD
PRAM SMC ONYX etc.
FANS/CPU
replaced RAM, memtest-ed. fine, FANS
gonna try again but up to nearly 2 months of all my spare time trying to shut this thing up so I can sell it. -
I bought a HP ENVY TouchSmart 15-j063cl Notebook PC (ENERGY STAR) last November and have been experiencing high temps and loud fans at very little CPU usage or strain. When I am streaming video often times I will hear the fan speed up every once and awhile and the TZ00 will be at about 60 degrees Celsius. I recently tested the system by playing Arma 3 on minimum graphics with shadows disabled and within a minute of playtime the fan was blaring and the TZ00 was at just under 80 degrees Celsius. I did this test with the laptop elevated on a metal stand leaving the main exhaust completely clear and the majority of the bottom also clear. During the test the CPU usage was at about 20% maxing at 30% and I was getting about 35 FPS.
(While I was typing this TZ00 was above 50 degrees celsuis)-10minutes after closing arma
What's the problem guys?
System Specs
Spoiler (Highlight to read)
System Manufacturer Hewlett-Packard Model HP ENVY TS 15 Notebook PC Total amount of system memory 12.0 GB RAM System type 64-bit operating system Number of processor cores 4 Storage Total size of hard disk(s) 931 GB Disk partition (C 807 GB Free (905 GB Total) Disk partition (D 3 GB Free (26 GB Total) Graphics Display adapter type Intel(R) HD Graphics 4600 Total available graphics memory 1792 MB Dedicated graphics memory 0 MB Dedicated system memory 0 MB Shared system memory 1792 MB Display adapter driver version 9.18.10.3071 Primary monitor resolution 1920x1080 DirectX version DirectX 11 or better Network Network Adapter Realtek PCIe GBE Family Controller Network Adapter Bluetooth Device (Personal Area Network) Network Adapter Broadcom BCM4352HMB 802.11ac 2x2 Wi-Fi Adapter Network Adapter Microsoft Wi-Fi Direct Virtual Adapter Notes The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits.
System Manufacturer Hewlett-Packard Model HP ENVY TS 15 Notebook PC Total amount of system memory 12.0 GB RAM System type 64-bit operating system Number of processor cores 4 Storage Total size of hard disk(s) 931 GB Disk partition (C 807 GB Free (905 GB Total) Disk partition (D 3 GB Free (26 GB Total) Graphics Display adapter type Intel(R) HD Graphics 4600 Total available graphics memory 1792 MB Dedicated graphics memory 0 MB Dedicated system memory 0 MB Shared system memory 1792 MB Display adapter driver version 9.18.10.3071 Primary monitor resolution 1920x1080 DirectX version DirectX 11 or better Network Network Adapter Realtek PCIe GBE Family Controller Network Adapter Bluetooth Device (Personal Area Network) Network Adapter Broadcom BCM4352HMB 802.11ac 2x2 Wi-Fi Adapter Network Adapter Microsoft Wi-Fi Direct Virtual Adapter Notes The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits.
Ended the test to prevent damage.
Here is the HWmonitor information saved about two minutes after the test.
Spoiler (Highlight to read)
N/A Exceeds 50,000 Character rule
N/A Exceeds 50,000 Character ruleI might sound weird but sometimes CPU runs hot in a loop. If you check in Task manager, it peaks at 3.2 GHz and won't come down. This situation is because of bios problems and HP won't confirm this problems as it is their way. I solved by reducing the processor maximum power to 80% in power options. From then, CPU wont peak itself as there is a limit and won't stay in the loop. Hot air coming from left vent is solved.
But if the chasi is becoming hot while air from vents is less hot than metal chasi, then I think its CPU fan problem. I prefer you to clean the vents by disassembling the laptop though nearest HP service or local service guy. Just clean the CPU fan and coolant pipes running around the CPU and GPU. Im not an HP expert but I found these are the issues for over-heating. Remember 60 degree is considered normal temp for i7-4700 processor. But, if you feel its hotter then check it once. Don't hesitate. -
We use win2003,win2008,win2012 servers.
I heard somewhere that Microsoft recommendation threshold of disk usage monitoring is ( free disk space >= 15- 20 %) , if I remember correctly, but how about CPU usage and memory usage monitoring ?
What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble and improve availability ?Hi,
You can refer the following Performance Tuning Guidelines,
Performance Tuning Guidelines for Windows Server 2003
http://download.microsoft.com/download/2/8/0/2800a518-7ac6-4aac-bd85-74d2c52e1ec6/tuning.doc
Performance Tuning Guidelines for Windows Server 2008 R2
http://blogs.technet.com/b/josebda/archive/2010/08/27/performance-tuning-guidelines-for-windows-server-2008-r2.aspx
WINDOWS SERVER 2012 - PERFORMANCE TUNING GUIDELINES
http://blogs.technet.com/b/itprocol/archive/2012/11/27/windows-server-2012-performance-tuning-guidelines.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neerajHi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj -
XML select query causing very high CPU usage.
Hi All,
In our Oracle 10.2.0.4 Two node RAC we are facing very high CPU usage....and all of the top CPU consuming processes are executing this below sql...also these statements are waiting for some gc wiat events as shown below.
SELECT B.PACKET_ID FROM CM_PACKET_ALT_KEY B, CM_ALT_KEY_TYPE C, TABLE(XMLSEQUENCE ( EXTRACT (:B1 , '/AlternateKeys/AlternateKey') )) T
WHERE B.ALT_KEY_TYPE_ID = C.ALT_KEY_TYPE_ID AND C.ALT_KEY_TYPE_NAME = EXTRACTVALUE (VALUE (T), '/AlternateKey/@keyType')
AND B.ALT_KEY_VALUE = EXTRACTVALUE (VALUE (T), '/AlternateKey')
AND NVL (B.CHILD_BROKER_CODE, '6209870F57C254D6E04400306E4A78B0') =
NVL (EXTRACTVALUE (VALUE (T), '/AlternateKey/@broker'), '6209870F57C254D6E04400306E4A78B0')
SQL> select sid,event,state from gv$session where state='WAITING' and event not like '%SQL*Net%';
SID EVENT STATE
66 jobq slave wait WAITING
124 gc buffer busy WAITING
143 gc buffer busy WAITING
147 db file sequential read WAITING
222 Streams AQ: qmn slave idle wait WAITING
266 gc buffer busy WAITING
280 gc buffer busy WAITING
314 gc cr request WAITING
317 gc buffer busy WAITING
392 gc buffer busy WAITING
428 gc buffer busy WAITING
471 gc buffer busy WAITING
518 Streams AQ: waiting for time management or cleanup tasks WAITING
524 Streams AQ: qmn coordinator idle wait WAITING
527 rdbms ipc message WAITING
528 rdbms ipc message WAITING
532 rdbms ipc message WAITING
537 rdbms ipc message WAITING
538 rdbms ipc message WAITING
539 rdbms ipc message WAITING
540 rdbms ipc message WAITING
541 smon timer WAITING
542 rdbms ipc message WAITING
543 rdbms ipc message WAITING
544 rdbms ipc message WAITING
545 rdbms ipc message WAITING
546 rdbms ipc message WAITING
547 gcs remote message WAITING
548 gcs remote message WAITING
549 gcs remote message WAITING
550 gcs remote message WAITING
551 ges remote message WAITING
552 rdbms ipc message WAITING
553 rdbms ipc message WAITING
554 DIAG idle wait WAITING
555 pmon timer WAITING
79 jobq slave wait WAITING
117 gc buffer busy WAITING
163 PX Deq: Execute Reply WAITING
205 db file parallel read WAITING
247 gc current request WAITING
279 jobq slave wait WAITING
319 LNS ASYNC end of log WAITING
343 jobq slave wait WAITING
348 direct path read WAITING
372 db file scattered read WAITING
475 jobq slave wait WAITING
494 gc cr request WAITING
516 Streams AQ: qmn slave idle wait WAITING
518 Streams AQ: waiting for time management or cleanup tasks WAITING
523 Streams AQ: qmn coordinator idle wait WAITING
528 rdbms ipc message WAITING
529 rdbms ipc message WAITING
530 Streams AQ: waiting for messages in the queue WAITING
532 rdbms ipc message WAITING
537 rdbms ipc message WAITING
538 rdbms ipc message WAITING
539 rdbms ipc message WAITING
540 rdbms ipc message WAITING
541 smon timer WAITING
542 rdbms ipc message WAITING
543 rdbms ipc message WAITING
544 rdbms ipc message WAITING
545 rdbms ipc message WAITING
546 rdbms ipc message WAITING
547 gcs remote message WAITING
548 gcs remote message WAITING
549 gcs remote message WAITING
550 gcs remote message WAITING
551 ges remote message WAITING
552 rdbms ipc message WAITING
553 rdbms ipc message WAITING
554 DIAG idle wait WAITING
555 pmon timer WAITINGI am not at all able to understand what this SQL is...i think its related to some XML datatype.
Also not able to generate execution plan for this sql using explain plan- getting error(ORA-00932: inconsistent datatypes: expected - got -)
Please help me in this issue...
How can i generate execution plan?
Does this type of XML based query will cause high GC wiat events and buffer busy wait events?
How can i tune this query?
How can i find that this is the only query causing High CPU usage?
Our servers are having 64 GB RAM and 16 CPU's..
OS is Solaris 5.10 with UDP as protocol for interconnect..
-YasserI found some more xml queries as shown below.
SELECT XMLELEMENT("Resource", XMLATTRIBUTES(RAWTOHEX(RMR.RESOURCE_ID) AS "resourceID", RMO.OWNER_CODE AS "ownerCode", RMR.MIME_TYPE AS "mimeType",RMR.FILE_SIZE AS "fileSize", RMR.RESOURCE_STATUS AS "status"), (SELECT XMLAGG(XMLELEMENT("ResourceLocation", XMLATTRIBUTES(RAWTOHEX(RMRP.REPOSITORY_ID) AS "repositoryID", RAWTOHEX(DIRECTORY_ID) AS "directoryID", RESOURCE_STATE AS "state", RMRO.RETRIEVAL_SEQ AS "sequence"), XMLFOREST(FULL_PATH AS "RemotePath"))ORDER BY RMRO.RETRIEVAL_SEQ) FROM RM_RESOURCE_PATH RMRP, RM_RETRIEVAL_ORDER RMRO, RM_LOCATION RML WHERE RMRP.RESOURCE_ID = RMR.RESOURCE_ID AND RMRP.REPOSITORY_ID = RMRO.REPOSITORY_ID AND RMRO.LOCATION_ID = RML.LOCATION_ID AND RML.LOCATION_CODE = :B2 ) AS "Locations") FROM RM_RESOURCE RMR, RM_OWNER RMO WHERE RMR.OWNER_ID = RMO.OWNER_ID AND RMR.RESOURCE_ID = HEXTORAW(:B1 )
SELECT XMLELEMENT ( "Resources", XMLAGG(XMLELEMENT ( "Resource", XMLATTRIBUTES (B.RESOURCE_ID AS "id"), XMLELEMENT ("ContentType", C.CONTENT_TYPE_CODE), XMLELEMENT ("TextExtractStatus", B.TEXT_EXTRACTED_STATUS), XMLELEMENT ("MimeType", B.MIME_TYPE), XMLELEMENT ("NumberPages", TO_CHAR (B.NUM_PAGES)), XMLELEMENT ("FileSize", TO_CHAR (B.FILE_SIZE)), XMLELEMENT ("Status", B.STATUS), XMLELEMENT ("ContentFormat", D.CONTENT_FORMAT_CODE), G.ALTKEY )) ) FROM CM_PACKET A, CM_RESOURCE B, CM_REF_CONTENT_TYPE C, CM_REF_CONTENT_FORMAT D, ( SELECT XMLELEMENT ( "AlternateKeys", XMLAGG(XMLELEMENT ( "AlternateKey", XMLATTRIBUTES ( H.ALT_KEY_TYPE_NAME AS "keyType", E.CHILD_BROKER_CODE AS "broker", E.VERSION AS "version" ), E.ALT_KEY_VALUE )) ) ALTKEY, E.RESOURCE_ID RES_ID FROM CM_RESOURCE_ALT_KEY E, CM_RESOURCE F, CM_ALT_KEY_TYPE H WHERE E.RESOURCE_ID = F.RESOURCE_ID(+) AND F.PACKET_ID = HEXTORAW (:B1 ) AN
D E.ALT_KEY_TYPE_ID = H.ALT_KEY_TYPE_ID GROUP BY E.RESOURCE_ID) G WHERE A.PACKET_ID = HEXTORAW (:B1
SELECT XMLELEMENT ("Tagging", XMLAGG (GROUPEDCAT)) FROM ( SELECT XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES (CATEGORY1 AS "categoryType"), XMLAGG (LISTVALUES) ) GROUPEDCAT FROM (SELECT EXTRACTVALUE ( VALUE (T), '/TaggingCategory/@categoryType' ) CATEGORY1, XMLCONCAT(EXTRACT ( VALUE (T), '/TaggingCategory/TaggingValue' )) LISTVALUES FROM TABLE(XMLSEQUENCE(EXTRACT ( :B1 , '/Tagging/TaggingCategory' ))) T) GROUP BY CATEGORY1)
SELECT XMLCONCAT ( :B2 , DI_CONTENT_PKG.GET_ENUM_TAGGING_FN (:B1 ) ) FROM DUAL
SELECT XMLCONCAT (:B2 , :B1 ) FROM DUAL
SELECT * FROM EQ_RAW_TAG_ERROR A WHERE TAG_LIST_ID = :B2 AND EXTRACTVALUE (A.RAW_TAG_XML, '/TaggingValues/TaggingValue/Value' ) = :B1 AND A.STATUS = '
NR'
SELECT RAWTOHEX (S.PACKET_ID) AS PACKET_ID, PS.PACKET_STATUS_DESC, S.LAST_UPDATE AS LAST_UPDATE, S.USER_ID, S.USER_COMMENT, MAX (T.ALT_KEY_VALUE) AS ALTKEY, 'Y' AS IS_PACKET FROM EQ_PACKET S, CM_PACKET_ALT_KEY T, CM_REF_PACKET_STATUS PS WHERE S.STATUS_ID = PS.PACKET_STATUS_ID AND S.PACKET_ID = T.PACKET_ID AND NOT EXISTS (SELECT 1 FROM CM_RESOURCE RES WHERE RES.PACKET_ID = S.PACKET_ID AND EXISTS (SELECT 1 FROM CM_REF_CONTENT_FORMAT CF WHERE CF.CONTENT_FORMAT_ID = RES.CONTENT_FORMAT AND CF.CONTENT_FORMAT_CODE = 'I_FILE')) GROUP BY RAWTOHEX (S.PACKET_ID), PS.PACKET_STATUS_DESC, S.LAST_UPDATE, S.USER_ID, S.USER_COMMENT UNION SELECT RAWTOHEX (A.FATAL_ERROR_ID) AS PACKET_ID, C.PACKET_STATUS_DESC, A.OCCURRENCE_DATE AS LAST_UPDATE, '' AS USER_ID, '' AS USER_COMMENT, RAWTOHEX (A.FATAL_ERROR_ID) AS ALTKEY, 'N' AS IS_PACKET FROM EQ_FATAL_ERROR A, EQ_ERROR_MSG B, CM_REF_PACKET_STATUS C, EQ_SEVERITYD WHERE A.PACKET_ID IS NULL AND A.STATUS = 'NR' AND A.ERROR_MSG_ID = B.ERROR_MSG_ID AND B.SEVERITY_I
SELECT /*+ INDEX(e) INDEX(a) INDEX(c)*/ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ("TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY C.IS_PRIMARY, H.ORIGIN_CODE, G.TAG_CATEGORY_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_ID
SELECT /*+ INDEX(e) */ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ( "TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLCONCAT ( XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE ), CASE WHEN LEVEL = 1 THEN :B4 ELSE NULL END )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY G.TAG_CATEGORY_CODE, C.IS_PRIMARY, H.ORIGIN_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_IDBy observing above sql queries i found some hints forcing for index usage..
I think xml schema is created already...and its progressing as you stated above. Please correct if i am wrong.
I found all these sql from AWR report and all of these are very high resource consuming queries.
And i am really sorry if i am irritating you by asking all stupid questions related to xml.
-Yasser
Edited by: YasserRACDBA on Nov 17, 2009 3:39 PM
Did syntax allignment. -
Slow slow slow...even with low CPU and memory usage.
Sometimes my Mac gets really slow, especially with applications, and even more especially when opening applications. What I don't understand is that when I check Activity Monitor during slow times, it shows plenty of CPU and memory still free, far from being maxed out. I try to keep a good chunk of my hard drive available for virtual memory too, so I'm unsure where its getting bogged down.
Any ideas?You may just need a little maintenance:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard or Snow Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack (not compatible with Snow Leopard.) If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack is not compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
9. SilverKeeper 2.0 (Freeware)
10. MimMac (Commercial)
11. Tri-Backup (Commercial)
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com. -
New iMac i7 sluggish with Call of Duty 4 - low CPU usage
Hi All,
I'm a recent convert from PC to Mac.
I'm running a new iMac i7 (2.8Ghz, 8Gb, 1TB, ATI HD4850, OS X 10.6.5 ) with not much software on it.
Call of Duty 4 modern warfare runs really great and very smooth.
However, when I pause the game and go to the desktop (to check my gmail for example) - then the computer runs very very slow (like everything is moving in slow motion) - if I click to open a new tab on Chrome or Firefox then there is a delay of about 2 seconds until the tab opens, if I move the mouse cursor from side to side over the dock - then the Dock magnification is happening in slow motion etc.
I have checked the CPU usage and it's only at 36% - which I think is not much.
The memory usage is:
Free 859 MB
Wired: 585 MB
Active: 1.34 GB
Inactive: 5.24GB
Used: 7.15GB
VM Size 159.05 GB
Page ins: 4.61GB
PAge outs: 772kb
Swap used: 5.3 MB
So why is the computer so slow?
Should it grind to a halt when running a game in the background?
This doesn't happen on my PC normally.
Would highly appreciate your thought/comments/suggestions.
Message was edited by: DutchGamerI think the reason is you don't have enough RAM for the about of apps you are running. Your system shows 859 MB free which really isn't that much if you are gaming. If you upgrade to 12 GB I believe the system will be fine. If you don't want to upgrade then when gaming I'd close everything else, especially web browsers as all of them continually use more and more RAM. Personally I use Safari (but I also have Chrome, Firefox and Opera on my system) and find that closing it from time to time saves RAM. What is occurring is a system running low on RAM resorts to RAM swapping and also uses HD space to swap so when it's going through these processes what you see are slow downs.
Roger -
Macbook getting how with very little cpu usage
So my macbook pro with retina display is getting oddly hot.
I run a few applications, about 5 or so, and the CPU reached about 95C, then was pulled back by the fans to 80C. I then played 1 game, (and left other aps open), and the CPU reached 101c. I've then closed everything but two aps, an IRC client, and safari with 6 tabs.
Current CPU usage:
16 - 19%
CPU temps:
Average is 80C
Fan speed:
3710 rpm
Program I'm using to record temps:
Temperature Guage
I've also let the vents on the side of the computer containing the cpu/gfx chip be suspended in air so they aren't onstructed by anything.
Is there something wrong with my MBP? Apple's tests said everything was alright but it's getting VERY hot compared to many stories I've seen across the net.ThePilotGuy wrote:
Also, when I restart the comp, should the temps stay the same, even after idling for a minute? They do for me.
Also, restarted my comp, same dock issue persists.
EDIT: Also, when I restart my computer, the background always changes to this grey backgroundless color and I have to re-set it.
And, when I log in, the screen quickly flashes white then takes maybe 5 to 9 secs to login. It hasn't done this until recently.
EDITEDIT: When the background is colorless, the bar at the top of the screen is just black, I cna't read any of the text.
The white flash is normal. That's the end of launchd process and the start of the loginwindow process.
The delay in the appearance of the loginscreen indicates that either
1. you're running something in
> System Preferences.. Users & Groups | Login Items
that is causing the problem every time you bootup and login. If either Skype or Limechat are in that list, get them out. Ideally, get everything out of that list.
or
2. if there's nothing in your Login Items, you may have a corrupt plist file. Force the system to make a new one by running this command in Terminal (beware that it will reset your Dock to default prefs, so if you've added any other icons to the Dock you'll have to do that again afterwards):
rm ~/Library/Preferences/com.apple.dock.plist
press 'return' on the keyboard and restart the mac. -
Restrict Backups to Low CPU Usage Times
I have been doing some pretty CPU intensive work lately, a lot of it in iTunes. I'm seeing the spinning beachball quite a bit when doing these tasks. To make it worse, Time Machine often picks these times to do a backup. I usually just end up canceling it.
Is there any way to set Time Machine to only do its backups at time CPU usage is below a certain threshold? If not, there's an option for a future release.
Thanks.
TonyHi Dave
Don't know if You know about the computer stonage. When You could set a
CPU to do just one task. Not so any more.
Mac computers are realy UNIX ditos. So they behave likvise.
To get it to work with better speed one has to get it from doing meaningless
tasks. This by giving it so much free space on the internal hard disk so that
it doesn't start virtual memory managment and joggling a lot of temp files.
To run iDVD I set free at least 25Gb free space on my internal hard disk and
run no un-necessary programs in the back-ground like "Screen, Energy-savers"
FileVault etc. incl. ActivityMonitor, Internet and other needless activities.
Ps. Activity Monitor - lies when running under iDVD and says that iDVD doesn't
respond. Let it be and it eventually succeedes with it's task.
Yours Bengt W -
Yosemite Upgrade/Clean Install Extreme slowdown/Low CPU usage
Hey so i upgraded to Yosemite on my mid 2011 (or 2010 according toApple account) imac. Ive experienced extreme slow down, after trying many things i did a clean install and its still acting the same. I've noticed that my CPU usage is usually low and it only goes up when the computer decides it wants to run normally for a minute. For example I'll be playing a game (elder scrolls online) get 20 to 40 % usage, but for some reason, that usage will drop out of nowhere, and make the game lag.
It takes anywhere from 4 to 10 minutes to open most applications, even a finder window or system prefences... ive ran repairs, disk permissions, tweaked settings like reduce transparency, im just at a loss. Mavericks worked fine and i dont have a time machine. Ive heard replacing the Dock.app with a mavericks dock.app could work but no one has that file online
Please help, let me know what you need from me. Apple on the phone said "its the luck of the draw!"I'd like to note i tried a fresh boot camp install , and the window side of things is also sluggish.
EtreCheck version: 2.1.8 (121)
Report generated March 24, 2015 at 2:48:43 PM MDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2010) (Technical Specifications)
iMac - model: iMac11,3
1 2.8 GHz Intel Core i5 CPU: 4-core
6 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 2:17:36
Disk Information: ℹ️
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Untitled (disk0s2) / : 748.35 GB (692.39 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 251.00 GB (192.09 GB free)
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Lexar USB Flash Drive 16.02 GB
21 (disk1s1) /Volumes/21 : 16.02 GB (14.64 GB free)
SteelSeries World of Warcraft MMO Gaming Mouse
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.driver.LogJoystick (2.0 - SDK 10.9) [Click for support]
[not loaded] com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.8) [Click for support]
User Login Items: ℹ️
Logitech Gaming Software Application (/Applications/Logitech/Logitech Gaming Software.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
2% WindowServer
1% LCore
0% fontd
0% loginwindow
0% System Events
Top Processes by Memory: ℹ️
232 MB com.apple.WebKit.WebContent
77 MB Safari
71 MB LCore
45 MB mds_stores
45 MB mds
Virtual Memory Information: ℹ️
4.12 GB Free RAM
1.29 GB Active RAM
529 MB Inactive RAM
501 MB Wired RAM
961 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 24, 2015, 12:24:53 PM Self test - passed
Mar 22, 2015, 12:01:02 AM /Library/Logs/DiagnosticReports/LCore_2015-03-22-000102_[redacted].hang
Mar 21, 2015, 10:42:20 PM /Library/Logs/DiagnosticReports/Appriority_2015-03-21-224220_[redacted].cpu_res ource.diag [Click for details]
Mar 21, 2015, 06:23:55 PM /Library/Logs/DiagnosticReports/ZeniMax Online Studios Launcher_2015-03-21-182355_[redacted].crash
Mar 21, 2015, 02:48:48 PM /Library/Logs/DiagnosticReports/setup_2015-03-21-144848_[redacted].hang -
I made a go at this once before, but here we go again!!
My rig is scoring very low in the CPU benchmarking dept. My main concern is 3d Mark03 and aquamark. In 3d mark I'm scoring 250 for a CPU score, and my overall aquamark score is pretty bad too - 14288. I was scoring ~28k with my 28000+ setup and the same vid card. My Sandra scores seem okay, there all in line with the referance scores. I've been thinking maybe the problem lies with my memory, since the mem and cpu are directly connected could a mem problem be disguised as a CPU issue. I've got c'n'c enabled, but I've tried it w/o it enabled-no difference. I've tried one stick, different slots, I'm at a loss. Thanks in advance.Quote
Originally posted by McGeyser
jimboy, what BIOS version are you running? After switching to version 1.2 and upping my RAM voltage to 2.8V I get great performance with OCZ.
I am convinced your AGP GART is your problem. If all else fails, do a fresh install of Windows and load the 4N1 4.51 before your ATI drivers. If 3dMark03 is having trouble with CPU, chances are your games are suffering too, you may not know how great your setup really is yet.
Yeah, So I've found the problem, but how to fix it?? Funnny thing is I know I've checked it before and it was @ 8x, but I've also had to change it bacj to 8x from off before. I polly took it for granted that it changed to 8x. My bios is 1.2. I'm glad to hear from you and flam3h that your OCZ is working fine, I have always liked OCZ and really didn't want to give it up. -
Lightroom 4.2 very poor CPU usage
Lightroom 4.2 seems reasonably fast when I work with it, whether it's browsing photos or adjusting sliders, although it takes several seconds to go into develop mode after launching it for the first time.
But now I'm exporting 1498 photos that are 5184 by 3456 and it's taking quite a while, I would say about an hour or more. This is on a brand new system I just assembled consisting of an i7 3930k with 32 GB of RAM that flies with every other program. While exporting this batch I opened Task Manager and I noticed that CPU usage never goes to 100%, not even close. There are peaks of 50%, but on average it must be in the 20s:
This is very disappointing on a CPU that has 6 physical cores and 12 logical cores with hyperthreading at 3.2 with turbo at 3.8 Ghz. The batch is exporting these photos from one SATA 6 drive to another SATA 6 drive, and the HD LED barely lights up, so I know the hard drives are not the bottleneck. So I'm wondering, is Lightroom 4.2 really that bad when it comes to taking advantage of the CPU cores? Is there anything I can do to make it use the CPU more?
Thanks,
SebastianVictoria Bampton wrote:
Some people are finding that turning off hyperthreading is helping, so I'd be interested to know if that makes a difference for you.
I would also split the export into 2 or 3 exports, which can run concurrently, which should max out your CPU. They don't max it out by default in order to let you carry on working while the export runs in the background.
I would prefer not to turn off hyperthreading, since part of the reason I spent $1300 in a system upgrade was to get that feature and it's not practical. Even if it worked, I would have to reboot every time I need to do a long export, go into the BIOS, turn off HT, do the export, reboot, turn it back on. Too much trouble.
As for running parallel exports, it doesn't really help much. I tried cutting this export roughly in half and export at the same time. Here you can see the result:
At times it went up to 60% or so, but the gain in time is negligible. I ran the two exports more or less at the same time, the second one several seconds later because I had to select the rest of the photos, open the export dialog, click OK and then wait for the "Prepare for export" progress dialog to finish, after which it started exporting. So that export took 31 mins. And this is because I went into the Asus software that comes with the motherboard and set it to do an automatic overclock, which took quite a while but it sped up the system considerably. Before doing that it was taking close to an hour.
After that, I shift deleted all the exported files, went into Lightroom, selected all the pictures in the folder and exported using exactly the same settings, jpeg, convert to sRGB, no resize and limit of 7000kb. So the gain from doing a parallel export is only 3 minutes. Evidently, Lightroom is not well designed to take advantage of all the hardware at its disposal, even if it is a superb photo processing program. -
Very high cpu usage - no programs running!!
Hi guys
Was really hoping someone could help me with this problem.
There is a constant 50-60% cpu usage and the laptop is getting superhot 80c and obviously sending the fan into overkill 6000rpm+.
But what is confusing is that is like this all the time!! even when there are no programs running at all!!
and even worse in activity monitor there is no process which can account for that cpu activity/heat. nothing is clocking in at more than 9%.
I have done repair permissions, used onyx to clean up the system, use clean my mac, rebuilt the index in spotlight and nothing works. the second you switch on and log on the problems start.
I cant think of anything else to do apart from doing a complete reinstall which is obviously something i would like to do avoid so any ideas to why this is happening? and how is it possible there can be cpu activity that is not accounted for?
thanks for any help/advice you guys can providehi Roam
yeah everything is disconnected, switched off airport as well and then rebooted
on restart with nothing but terminal open here is the readout from
Processes: 57 total, 2 running, 55 sleeping, 230 threads 10:46:22
Load Avg: 1.10, 0.36, 0.14 CPU usage: 36.40% user, 19.90% sys, 43.68% idle
SharedLibs: 6212K resident, 5708K data, 0B linkedit.
MemRegions: 5325 total, 166M resident, 15M private, 121M shared.
PhysMem: 446M wired, 248M active, 234M inactive, 927M used, 1120M free.
VM: 135G vsize, 1036M framework vsize, 36917(0) pageins, 0(0) pageouts.
Networks: packets: 40/6356B in, 40/7044B out. Disks: 16108/740M read, 6057/104M written.
PID COMMAND %CPU TIME #TH #WQ #POR #MRE RPRVT RSHRD RSIZE VPRVT VSIZE PGRP
262 mdworker 0.1 00:00.24 3 1 50- 73- 2448K- 10M 15M- 33M- 2411M- 262
254 mdworker 0.0 00:00.18 3 1 50 66 1672K 11M 7488K 31M 2410M 254
240 top 2.8 00:01.88 1/1 0 27 35 1376K 248K 1940K 17M 2378M 240
222 bash 0.0 00:00.00 1 0 17 26 396K 248K 1056K 17M 2378M 222
217 login 0.0 00:00.03 1 0 22 56 520K 248K 2756K 18M 2379M 217
213 Terminal 1.6 00:03.10 6 1 120 127 4212K 20M 25M 34M 2703M 213
145 ntpd 0.0 00:00.00 1 0 14 24 88K 940K 308K 156K 2378M 17
144 activitymoni 0.0 00:01.43 1 0 23 37 724K 244K 1248K 28M 2389M 144
140 cvmsComp_x86 0.0 00:00.04 1 0 18 35 1708K 10M 6208K 18M 2392M 140
132 System Event 0.0 00:00.23 2 1 72 114 2700K 9180K 17M 31M 2678M 132
128 Smart Scroll 0.0 00:00.18 2 1 95- 104- 3080K- 13M 15M- 41M- 2695M- 128
126 CCacheServer 0.0 00:00.01 2 2 35 54 668K 248K 1668K 41M 2401M 126
119- Little Snitc 0.0 00:00.15 3 1 99 90 1448K 15M 4640K 31M 896M 119
118- Little Snitc 0.0 00:00.12 3 1 90 87 1276K 14M 4388K 31M 894M 118
114 SIMBL Agent 0.0 00:00.12 2 1 84 167 2796K 11M 12M 304M 11G 114
113 AirPort Base 0.0 00:00.05 4 1 84 87 1588K 14M 11M 31M 2685M 113
107 UserEventAge 0.1 00:00.29 3 1 157 108 2268K 2092K 11M 41M 2403M 107
102 pboard 0.0 00:00.00 1 0 22 38 404K 252K 872K 18M 2379M 102
101 fontd 1.2 00:02.36 3 2 235+ 134+ 7796K- 2036K+ 9492K+ 35M- 2428M+ 101
98 Finder 0.0 00:01.08 8 3 175 178 5152K 21M 31M 27M 2707M 98
97 SystemUIServ 0.0 00:00.96 3 1 222 227 8240K 27M 32M 44M 2722M 97
96 Dock 0.5 00:01.03 4 2 121 181 3244K 26M 23M 17M 2707M 96
92 launchd 1.0 00:00.47 2 0 468+ 61+ 528K 488K+ 996K+ 38M 2399M+ 92
86 coreaudiod 0.0 00:00.09 3 1 133 77 1356K 448K 6432K 31M 2393M 86
78 cvmsComp_x86 0.0 00:00.19 1 0 18 35 1804K 10M 6404K 18M 2392M 78
76 launchd 0.0 00:00.00 2 0 37 47 316K 432K 708K 38M 2399M 76
75 cvmsServ 0.0 00:00.00 2 0 45 29 336K 248K 808K 19M 2381M 75
72- Nalpeirond6 0.0 00:00.01 1 0 14 25 112K 240K 372K 17M 586M 71
64 ocspd 0.0 00:00.01 1 0 23 27 532K 304K 1280K 17M 2378M 64
61 socketfilter 0.0 00:00.11 3 1 47 51 1500K 8228K 2904K 29M 2403M 61
57 WindowServer 0.9 00:03.50 4 1 191 417- 5720K+ 12M- 25M 40M- 2718M- 57
48 coreservices 4.2 00:02.74 7 4 291+ 162- 2884K 11M 13M+ 17M- 2406M- 48
47 distnoted 1.0 00:00.50 4 3 62 41 764K 240K 1240K 30M 2390M 47
46 taskgated 0.7 00:00.33 6 0 50 35 644K 244K 1216K 29M 2389M 46
45- lsd 0.0 00:00.13 2 1 56 65 832K 10M 2396K 30M 615M 45
44- qmasterd 0.0 00:00.11 2 1 31 139 1632K 9036K 6212K 29M 622M 44
41 autofsd 0.0 00:00.00 2 1 29 37 480K 244K 984K 28M 2388M 41
40 blued 0.0 00:00.12 2 1 63 44 1132K 8116K 4240K 28M 2402M 40
34 dynamic_page 0.0 00:00.00 1 0 20 24 308K 240K 788K 17M 2378M 34
32 fseventsd 0.1 00:00.17 12 1 95 64 1236K 244K 1748K 33M 2395M 32
31 hidd 0.0 00:00.95 4 2 70 48 768K 264K 1524K 30M 2391M 31
29 KernelEventA 0.0 00:00.00 4 2 33 42 524K 244K 1020K 30M 2390M 29
28 loginwindow 0.3 00:00.55 2 1 230 116 2340K 13M 8460K 25M 2677M 28
27 mDNSResponde 0.0 00:00.04 3 1 50 54 900K 280K 1784K 40M 2400M 27
Plus sorry should have written this on first msg but the most recent change i did to my computer before the problems started was change the Icons for Finder. I have changed it back, was using candybar but still no change. anyway to complete reset icons for finder without having to reinstall?
Maybe you are looking for
-
How to relate indicator in main vi
Sorry i have posted this question previously in the wrong board Hi In my program i using a menu ring control and indicators.i cretaed a subvVI for this and when i tried to execute in my mainVI the indicators are not working Thanks
-
Trying to open adobe flash player so my daughter can play educational games. Think it's downloaded ok, but it won't open due to 'conflicting instances'. I don't even know what that means!
-
Will applications update when downloaded with a different iTunes account?
Here is my scenario: My girlfriend bought an iPhone. To sync her contacts I used iTunes on my computer, unknowlingly setting up her iPhone to have my iTunes account set up on it. Since I didn't realize my iTunes account was saved to her iPhone, she p
-
How to rename the search databases in sharepoint 2013
Hi all, I have configure the search in sharepoint 2013 and 4 databases has been created in sqlserver.by default db are got created with GUID n sh i want change those DB names . could you pls help me how can i change the DB names. THanks Dhana sekhar
-
How to access the children of a particular column of af:table
Hi I need to access and change the inputtext value, which is child of af:column of af:table(table rows dynamically change) , through javascript I tryed as fallows, but failed, can any one tell the answer <f:facet name="metaContainer"> <af:group> <![C