Very low Memory Scores PC4000.. Help...

Hi guys...
I have a question... I have 2x512MB PC4000 memory modules running 1:1 @ 250fsb (see my signature) and the scores I get from Sisoft Sandra Memory Bandwith is 3384 / 3381.
CAS Latency 2.5
Ras to CAS 4
Cycle 8
Bank Cycle 7
and is running un 2T...
If I turn things up a bit to 1T instead of 2T, my scores jump to 3761MB/s, but the PC becomes unstable and is not anywhere near 5400 other people are getting...
The real question is WHY the reference score in Sisoft Sandra depicting a board with PC3200 memory and a board using an Nforce 3 Pro 150 has memory scores of 5426/5338, clearly very superior to my scores, whilst I think my configuration is far better...
Can anyone help me to figure what's going on? I really appreciate the help.
Best regards,
Carlitos
System specs:
Athlon AMD 64 3200+ @ 2250Mhz (250x9)
MSI K8N Neo2 Platinum
Thermalright SLK 948U
2x512MB Kingmax PC4000 (1:1 @ 250fsb)
2x120GB Seagate HD, SATA 7200RPM on channels 3-4
Liteon CD-RW 52x24x48
Liteon DVD-RW SOHW-1633S
Ati Radeon 9800 Pro, 128MB, 419/720
Enermax 480W PS
Dell 19" Vivitron

Its pretty simple actually...Its the fact you are running at 2T.
That setting means the world for A64's and will give you ~10% more memory bandwidth.
All that of course if your memory and board can handle these timings and frequency.
Trust me, running 230 HT with 1T will give you same bandwidth as 250 at 2T.
Im running 1T at 225 and i get 3400 @ Sandra benchmark.
So my advice is, put 1T for starters, and then work your way up the HT, with increasing voltages accordingly.When you have reached the limit of 1T, this will be your max o/c.
2T is not even worth trying or benching at...
Try it and post your results.

Similar Messages

  • HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

    hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

    Hello Kishore1022,
    It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
    iPad User Guide
    http://help.apple.com/ipad/7/#/iPad99f37037
    Go to Settings > Music to set options for Music, including:
    Sound Check (to normalize the volume level of your audio content)
    You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Or
    iTunes 11 for Mac: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12283
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Very Low 3dMark2001 score w/ MSI GeForce4 MX440SE-T

    HELP!!
    My System:
    AMD Athlon xp 2000+
    ASUS A7V333
    256 DDR 333MHz Kingston RAM(Latency 2.5)
    (MS-8878)MSI Geforce4 MX440SE-T
    And With that system I am getting very low scores about 4070 at 3Dmark2001 SE! It seems to me impossible, it is near to my old Geforce 2MX.
    I think there is some problem with my configuration, but yet I couldn't find anything.I tried alot of things, checked all drivers they are all up to date.(Via 4in1 drives:latest hyperion thing,NVidia WHQL certf. 40.72. etc..)I enabled fast write, enhanced agp performance control from bios and eveything I know from display settings i.e. Antialiasing disabled, d3d tweaked and still the problem persists.
    I need someone who can help me under these hard and strange conditions.. ?(

    I have to agree with sqersch, I've run at 60 mhz and got way more than 60 fps, refresh rate doesn't have alot to do with card performance.  Sure you get a fps boost when you increase the refresh rate but nothing significant and it certainly doesn't "cap" the frame rate, it can just improve it slightly.  Besides about the only thing you would want to increase the refresh rate for is so that it would be easier on the eyes, (less flicker).  As for the guy complaining about his benchmark, what exactly do you expect to get with an mx version of a geforce 4?  I'm not saying that score isn't wrong, just wondering what score you hope to achieve with an mx card.
    Geforce system specs:
    Msi Kt3 Ultra 2-R with amd athlon xp 2200+ (overclocked to 1.98)
    Msi geforce 4 ti4200 128 mb (overclocked to 300/590)
    512 mb ddr @333mhz
    Ac97 advance audio (crappy gotta get audigy!!!)
    3com 10/100 netcard
    Volcano 9 smartfan 2
    4X 3.5" case fan
    windows xp pro sp1

  • Very low CPU scores

    I made a go at this once before, but here we go again!!  
    My rig is scoring very low in the CPU benchmarking dept.  My main concern is 3d Mark03 and aquamark.  In 3d mark I'm scoring 250 for a CPU score, and my overall aquamark score is pretty bad too - 14288.  I was scoring ~28k with my 28000+ setup and the same vid card.  My Sandra scores seem okay, there all in line with the referance scores.  I've been thinking maybe the problem lies with my memory, since the mem and cpu are directly connected could a mem problem be disguised as a CPU issue.  I've got c'n'c enabled, but I've tried it w/o it enabled-no difference.  I've tried one stick, different slots, I'm at a loss.  Thanks in advance.

    Quote
    Originally posted by McGeyser
    jimboy, what BIOS version are you running? After switching to version 1.2 and upping my RAM voltage to 2.8V I get great performance with OCZ.
     I am convinced your AGP GART is your problem. If all else fails, do a fresh install of Windows and load the 4N1 4.51 before your ATI drivers. If 3dMark03 is having trouble with CPU, chances are your games are suffering too, you may not know how great your setup really is yet.
    Yeah, So I've found the problem, but how to fix it??  Funnny thing is I know I've checked it before and it was @ 8x, but I've also had to change it bacj to 8x from off before.  I polly took it for granted that it changed to 8x.  My bios is 1.2.  I'm glad to hear from you and flam3h that your OCZ is working fine, I have always liked OCZ and really didn't want to give it up.

  • Need help... GPU very low benchmark scores... my MSI Board the bottleneck?

    Both the GPU is on a default clock speed.
    Things I also notice
        During benchmark or gaming, GPU2 is 15c hotter
        I experience some glitches during gaming, like in Far Cry 3 the NPC movement goes retarded SOMETIMES (for example when they try to do something, their animation gets glitched and its like they are moving back and forth ultra fast) - have only played the game for 30mins but I could see this happen to NPCs.
        Also in Crysis 2 and Assassin's Creed 3, sometimes the graphics goes retarded like in AC3 the walls and the characters gets rumbled up while in Crysis 2 the graphics gets some artifact - The problem gets solve if I restart the game. It happens sometimes.
    Well I just disabled SLI and tried another benchmark on each card (moving my monitor cable to each GPU)
    Each card averages around 980 Score at Heaven. Ultra Quality and Extreme Tessel at 1080p 8xAA. And I think this is kinda low? Because I saw other people have around 1300 iirc.
    Right now while Heaven is still at the background
    GPU2 TOP
    Graphics  405 MHz
    Memory 324 MHz
    Temp 45c
    GPU1 BOTTOM (Testing this GPU)
    Graphics 1306 MHz
    Memory 3505 MHz
    Temp 72c
    When I tested GPU2 TOP the results are similar except I think GPU1 is around 38c
    Please help me out, what should I do?
    I'm thinking maybe my motherboard is bottlenecking my GPUs? I have OC Genie ON at 4.2Ghz. Using both GPU on the native x16 slots (base on the manual).
    Please help.

    Sometimes a reflash can straighten things out. Recommend to reflash using M-Flash BIOS + ME option with the archive given here;
    https://forum-en.msi.com/index.php?topic=169796.msg1253345#msg1253345
    Re-install the ME driver after the flash.
    What does GPU-Z show for GPU1 and GPU2 for bandwidth? Recommend to place the cooler running card closest to the CPU when running SLI.
    Have you tried each card individually in the PCI-E5 slot as well as in the PCI-E1 slot? If in PCI-E5 both run fine at 8X with no issues noted, you might try another SLI bridge.
    With a Z68 and 2700k, GTX 480's (reference) in Gen2 SLI, 1920X1080, 47X, 1866 RAM, Heaven 4.0 test was 1604, Valley was 2709. With GTX 680's in Gen2 (reference) installed, Heaven was 2554, Valley 4674. There is definately something wrong if those GTX 480's were beating out your GTX 770's.
    Added: Just ran another test;

  • FX5900 Very Low 3DMARK Score

    With the system below, I get a 3DMARK3 (Build 340) score of 4540 (53.03 drivers) at standard clocks (400/850), which seems to be rather low.  At the highest stable OC (425/925), I get 4791. Any tips, suggestions or comments? Thanks in advance.
    System:
    Intel P4 2.8C 800FSB, HT
    ASUS P4P800 Deluxe UAY
    OCZ 2X512MB PC3200 Dual Channel EL Platinum
    MSI FX5900 VTD128 VIVO
    Detailed Results (at 400/850):
    3DMark Score: 4540 3DMarks
    GT1 - Wings of Fury: 161.8 FPS
    GT2 - Battle of Proxycon: 33.3 FPS
    GT3 - Troll's Lair: 27.1 FPS
    GT4 - Mother Nature: 22.1 FPS
    CPU Score: 568 CPUMarks
    CPU Test 1: 59.6 FPS
    CPU Test 2: 10.7 FPS
    Fill Rate (Single-Texturing): 1365.1 MTexels/s
    Fill Rate (Multi-Texturing): 2835.3 MTexels/s
    Vertex Shader: 11.7 FPS
    Pixel Shader 2.0: 43.0 FPS
    Ragtroll: 15.9 FPS
    No sounds: 50.2 FPS
    24 sounds: 40.8 FPS
    60 sounds: Not supported

    Quote
    Originally posted by The Black Wibble
    I'd be interested to know the 3DMark2003 score when there are fewer programs running in the background.  Use msconfig to disable all the programs under the startup tab except NvCpl and rundll32 nvclock.  Assuming you are running XP try to disable as many *non* microsoft services as you feel safe doing.  Reboot into that environment and redo the benchmark.
    Also, do you know for sure that your pc3200 memory is running at full speed (ie. 400MHz) and is not using some other fsb:mem ratio of 4:3 or 5:4?
    The given score is with every non-essential background process and service diasbled (though it makes very little difference). DRAM is running at 1:1 (ie 400). Tried 5:4 with FSB=230 (max stable at stock voltage). Gains a little (CPU), loses a little (RAM), doesn't make much difference in the end. IOW, everything is running at specs now.
    Also, (to ToxicTaz) it's not a SP.
    I noticed a peculiar thing, though. When I ran Aida and checked video mem speed, it reported, as "actual speed", some odd number quite a bit lower than 850 (something like 736). This is in 2D mode of course (but memory speed should be the same). Anyway, now I cannot duplicate it. Could it be that the memory is stepping down on its own accord? GPU, yes, but I didn't think memory could do that. GPU doesn't get too hot either (~48 deg right after 3dmark3). Is there a way I can check "actual" memory speed during 3D testing, if there is even such a thing?
    Mind you I can OC memory upto 930 OC and it passes nVidia test and seems to be running fine at that. But if it's lowering down behind my back, that would explain it.

  • Very low on memory

    I have a 3 Mhz AMD processor, 500GB hard drive with 400GB free, Windows XP Pro SP3, 4 GB RAM.  The application is PRE9.
    I've searched the forum and read the "solution" to this problem but am afraid to apply it because I have other memory-hog applications.  Here are my questions:
    If 2 GB of virtual memory are applied to the application, what causes it to reapply the 2GB?  Is it closing, then restarting the application?  Is it restarting the system?
    If it's either of the two above, they are not working for me.  I got the "very low memory; save your project" message for the first time the other day.  Now I get it every time I open the application and start to work on a project.  Even after a reboot.  I open a project, and after the first edit, it gives me the message.
    In other words, PRE9 is now unuseable.  The projects are not large.  The .avi clip I'm trying to work on right now is 1.5 MB and all I want to do is Auto Adjust Color.  The color correction applies, I click play to see it in the Monitor workspace, and the message pops up.
    Does anyone have any suggestions?  I used the trial version for a couple of days without downloading all the 4.3 GB of Content.  After purchasing the software, I did install the additional Content.  After that is when I got the message for the first time.  Could the additional content be the culprit?  I'll probably never use it because the edits I do are very simple color correction, audio adjustment, and deletion of unwanted frames?    Can you uninstall just the Content?
    Could it have anything to do with Adobe CS5 Bridge running in the background?  That was a problem with installation.  However, doesn't seem to help now.  But if that is the problem, how can I turn Bridge off from running in the background so I don't have to remember to exit it every time I reboot?
    I use these small video clips interspersed with still pictures in a slideshow created with different software.  I won't ever be making large movies with menus, animation, and most of the neat features of PRE9.
    I'll much appreciate any help.
    PJP

    No, my projects and video are on the 500 GB drive with 400 GB free.
    I just went back into the 1.5 MB project, did nothing to it, just tried to play it.  That's when I get the message.  I now realize that is when I always get the message -- when I try to play.
    I also decided to ignore the message and see what would happen. The color correction that I applied before only lasted for a few frames instead of for the entire clip.  Additionally, the audio is now messed up.
    I was having none of these problems before I applied the 4.3 GB Content.  Could that be the problem?
    PJP

  • How can I disable the notification centre? How can I fix the low memory of my iPod?

    Does somebody know how to disable the notification centre?
    It is annoying!
    If I want to play Fruit Ninja it always opens und if I want to scroll on youtube too.
    Could somebody help me?
    Since iOS 5.0.1 my iPod has very low memory.
    More than the half of them are running not or only bad.
    Before iOs 5.0.1 I could use all Apps normaly.

    - From the users guide:
    Turn notifications on or off:  Go to Settings > Notifications. Tap an item in the list, then turn
    notifications on or off for that item.
    - Closing unused app via the task bar and periodically powering off and back on helps.

  • My Ipod, keeps on saying very low battery then restarting. then turning bright with the apple logo and going back to very low battery again.

    My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.

    If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
    And try here.   Troubleshooting iPhone hardware
    Powering Apple and third party peripherals through USB

  • Low Index Score on Vista

    I just finished installing vista ultimate 64-bit via bootcamp after spending about 2-3 hours hunting for drivers and now everything works! I can even control 2 out of the 4 fans! Now comes the moment to shine--the test. It logged in fine and the test seemed to finish quite fast (under 1 min 30 sec), but the score is only 4.8 with the lowest being my memory... I have a 2.4 GHz, 4GB RAM, 256 Nvidia 8600m gt video card, 160 GB 5400 rpm HD, and the lowest score is my memory? Is anyone else having the same thing happen to them?
    I installed aftermarket memory from Mushkin (2 x 2GB sticks), but I really hope thats not whats putting it down. All in all, vista 64 runs seamlessly and everything is in working order, but I just had to ask out of curiosity. Thanks.

    Yep, it's going to do that with 667MHz RAM (or even with faster 800MHz RAM if the memory controller on your model of Mac doesn't run 800MHz RAM @ full speed).
    Frankly...and this is from quite a bit of experience...don't fret the number. I have machines that are also Intel based and give a lower memory score...but they still smoke my AMD machines that score 5.9 on the Vista RAM test. The Vista system assessment is nifty, but, I wouldn't use it as the end-all, be-all for rating the performance of a computer.

  • Speaker very low sound

    The speaker of my HP slate 10 is very low...please help me!
    This question was solved.
    View Solution.

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you.
    It looks like you are having difficulties with regards to the volume of the Table [HP Slate 10]
    Please try rebooting the Table once to check if that resolves the issue
    OR
    How does your Slate perform with just audio files using the Play Music app?  And, have you tried playing a movie trailer from Google Play?  Just tap on a movie title and play the trailer by tapping on the > arrow.
    What about if you use earphones?
    Do you ear system sounds?  Go into Settings>Sounds>Touch Sounds where there is a checkbox on the right indicating whether Touch Sounds are on or off.
    The speakers on the Slate aren't all that, but they do produce sound that's loud enough to listen to TV shows and movies.  If you can't get enough volume from them with other apps such as Play Music, there may be a hardware issue.
    A couple other suggestions...try restarting it.  And back to earphones, try inserting an earphone plug all the way in, and removing it.
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • HT1435 hi there i have this problem with my ipod on the second picture which says "Pease Wait Very Low Battery" but it will not charge at all or turn on, sync with computer anybody any ideas.

    Hi there I have an ipod classic which will not charge and keeps saying "Please Wait Very Low Battery" can anbody help me its just sad to see it go.

    Normally it takes 2 to 4 hours to fully charge an iPod Battery, using a USB2.0 port or wall charger.
    Even if the battery is dead, you can have it replaced at Apple Store for about US$60 or at any 3rd Party Ipod Service Center for less.

  • Very low on system memory warning with plenty of memory left

    Hi,
    I am using Premiere Elements 7 on Windows XP, AMD 3GHz dual core with 4GB memory. I create DVDs based on AVCHD files from a Canon HF100, almost no editing, 1 hour of DVD content (8 GB worth of AVCHD files) . I have done this with the same configuration in the past without problems, but lately Premiere has been very unstable, either crashing outright or giving me the following warning:
    Adobe Premiere Elements is running very low on system memory. Please save your project and proceed with caution.
    When I try to burn a DVD, this warning is always shows within minutes, followed by a transcoding error. I tried everything to free up more space, nothing else significant is running on my machine, and I have exited most other background processes. When the above warning is shown, physical memory consumption is is reported as following:
    Commit Charge: 1.8 GB
    Premiere Elements process: 1.1 GB
    Free memory: 1.5 GB
    I also have virtual memory set to 8GB. Premiere scratch directories are on a disk with 500GB free space. I uninstalled and reinstalled Premiere, but no improvement.
    Other relevant software on my machine, some of it installed after I had my last successful DVD burn:
    Norton 360 2010 (Disabled Firewall and Autoprotect)
    Adobe Web Premium CS3
    Adobe Lightroom 2.5
    Copernic Desktop Search (Disabled)
    A number of free video tools, like HandBrake, AutoGK, AVISynth, VobSub, DVD Decrypter, Xvid
    Tivo Desktop (Disabled)
    iTunes (Disabled)
    Could there be any side effect from the other software? Any potential hardware problems I should investigate? Everything else works perfectly, including the other Adobe products.
    I very much appreciate your help, Premiere is unusable at the moment and I have some DVDs I desperately want to create.
    Thanks,
    Alex

    Have you rendered your timeline?
    If you're sceneline mode, switch to timeline mode. Is there a red line above your clips? If so, press Enter and let the program render your timeline (the red line will turn green).
    This should greatly improve your program's stability and performance.
    Also, ensure that the disc where you are storing your video files is formatted NTFS and not FAT32 (as they are when they come from the factory). FAT32 drives have a file size limit that can choke video work.
    And, if this 500 gig drive is not your C drive, ensure that your C drive also has at least 30-50 gigs of free space, freshly defragmented and with its temp files regularly cleared.

  • Ios 7.1 = no Wifi on iPhone 4s   very low battery runtime... HELP!!!

    ios 7.1 = no Wifi on iPhone 4s + very low battery runtime... HELP!!!

    Welcome, sorry to hear your news, there are numerous threads on this issue. Try the trouble shooting on the other threads, I do not recommend sticking it in the freezer or heating with a hair dryer though,
    If it's within warranty and trouble shooting doesn't work, get it. Ack to apple ASAP and get it replaced.
    Many others are in the same position, who also have a 4s
    Good luck

  • I want to ask something about firefox. why firefox use very much memory? can you develop to reduce memory comsume? this problem is very distrub in my PC with low memory.

    I want to ask something about firefox.
    why firefox use very much memory?
    can you develop to reduce memory comsume?
    this problem is very distrub in my PC with low memory.
    == This happened ==
    Every time Firefox opened

    How much memory is Firefox using right now?
    # Press '''CTRL+SHIFT+ESC''' to load the Task Manager window
    # Click the Processes tab at the top. (Click once near the top of the window if you don't see tab
    # Find firefox.exe, and see how many kilobytes of memory it's using.
    Showing around 80MB when Firefox first starts is normal. Right now, I have 75 tabs open and it's using 500MB - this varies a lot depending on what you have in the tabs.
    Other than high memory usage, what other problems are you experiencing? (Examples include slowness, high CPU usage, and failure to load certain sites)
    Many of these issues, including high memory usage, can be caused by misbehaving add-ons. To see if this is the case, try the steps at [[Troubleshooting extensions and themes]]. Outdated plugins are another cause of this issue - you can check for this at http://www.mozilla.com/plugincheck

Maybe you are looking for