Very low on memory

I have a 3 Mhz AMD processor, 500GB hard drive with 400GB free, Windows XP Pro SP3, 4 GB RAM. The application is PRE9.
I've searched the forum and read the "solution" to this problem but am afraid to apply it because I have other memory-hog applications. Here are my questions:
If 2 GB of virtual memory are applied to the application, what causes it to reapply the 2GB? Is it closing, then restarting the application? Is it restarting the system?
If it's either of the two above, they are not working for me. I got the "very low memory; save your project" message for the first time the other day. Now I get it every time I open the application and start to work on a project. Even after a reboot. I open a project, and after the first edit, it gives me the message.
In other words, PRE9 is now unuseable. The projects are not large. The .avi clip I'm trying to work on right now is 1.5 MB and all I want to do is Auto Adjust Color. The color correction applies, I click play to see it in the Monitor workspace, and the message pops up.
Does anyone have any suggestions? I used the trial version for a couple of days without downloading all the 4.3 GB of Content. After purchasing the software, I did install the additional Content. After that is when I got the message for the first time. Could the additional content be the culprit? I'll probably never use it because the edits I do are very simple color correction, audio adjustment, and deletion of unwanted frames? Can you uninstall just the Content?
Could it have anything to do with Adobe CS5 Bridge running in the background? That was a problem with installation. However, doesn't seem to help now. But if that is the problem, how can I turn Bridge off from running in the background so I don't have to remember to exit it every time I reboot?
I use these small video clips interspersed with still pictures in a slideshow created with different software. I won't ever be making large movies with menus, animation, and most of the neat features of PRE9.
I'll much appreciate any help.
PJP

No, my projects and video are on the 500 GB drive with 400 GB free.
I just went back into the 1.5 MB project, did nothing to it, just tried to play it. That's when I get the message. I now realize that is when I always get the message -- when I try to play.
I also decided to ignore the message and see what would happen. The color correction that I applied before only lasted for a few frames instead of for the entire clip. Additionally, the audio is now messed up.
I was having none of these problems before I applied the 4.3 GB Content. Could that be the problem?
PJP

Similar Messages

S820 very low internal memory

S820 has 2.4gb of internal memory but about 1.8gb used by system. Meaning we only have abt 600mb of space to install downloaded apps. Very frustating. Can you free up more memory without having to root them? Can you tranaform the built in storage of 1.2gb to be internal memory? This is fruatating if you have to worried when trying to install new apps that ypur memory wpuld be insufficient. Lenovo, any solution to this?

unfortunately this is a great design flaw of this phone.Not much you can do except keeping apps to a minimum, or doing what's in here: https://www.youtube.com/watch?v=GN6lzO03pqI .....if you dare

High Page Reads/Sec on Windows 2008 R2 64-bit running on VMware but very low Real Memory & Page file Usage.

Hello All,
Below is the server configuration,
OS: Windows 2008 R2 Enterprise 64 Bit
Version: 6.1.7601 Service Pack 1 Build 7601
CPU: 4 (@ 2.93 GHz, 1 core)
Memory: 12 GB
Page file: 12 GB
1. The actual utilization, be it a 15 minute sample, hourly, weekly etc, the utilization of real memory has never crossed 20% and the page file usage is at 0.1%. For some reason, the Pages/Sec>Limit% counter reports 100% continuously regardless of the
sampling intervals. Upon further observation, the Page Reads/Sec value is somewhere between 150~450 and Page Input/Sec is somewhere between 800~8000. Does this indicate a performance bottleneck? (I've in the interim asked the Users, App. Owners to see if they
notice any performance degradation and awaiting response). If this indicates a performance issue, please could someone help list down how to track this down further to which process/memory mapped file is causing it? and what I should go about performing to
fix this problem please?
p.s., initially the Security logs were full on this server and since page file is tied to Application, Security and System logs, this was freed up to see if this is causing the high page reads but this doesn't.
2. If the above does not necessarily indicate a performance problem, please can someone reference few KB articles that confirms this? Also, in this case, will there be any adverse effects if attempting to fine tune a server which is already running fine?
assuming App. Owners confirm there isn't any performance degradation.
Thanks in advance.

Hi,
Based on the description, we can try to download Server Performance Advisor (SPA) to help further analyze the performance of the server. SPA can generate comprehensive diagnostic reports and charts and provides recommendations to help you quickly analyze
issues and develop corrective actions.
Regarding this tool, the following articles can be referred to for more information.
Microsoft Server Performance Advisor
https://msdn.microsoft.com/en-us/library/windows/hardware/dn481522.aspx
Server Performance Advisor (SPA) 3.0
http://blogs.technet.com/b/windowsserver/archive/2013/03/11/server-performance-advisor-spa-3-0.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO IOS 7.1.2

You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation

Very low on system memory warning with plenty of memory left

Hi,
I am using Premiere Elements 7 on Windows XP, AMD 3GHz dual core with 4GB memory. I create DVDs based on AVCHD files from a Canon HF100, almost no editing, 1 hour of DVD content (8 GB worth of AVCHD files) . I have done this with the same configuration in the past without problems, but lately Premiere has been very unstable, either crashing outright or giving me the following warning:
Adobe Premiere Elements is running very low on system memory. Please save your project and proceed with caution.
When I try to burn a DVD, this warning is always shows within minutes, followed by a transcoding error. I tried everything to free up more space, nothing else significant is running on my machine, and I have exited most other background processes. When the above warning is shown, physical memory consumption is is reported as following:
Commit Charge: 1.8 GB
Premiere Elements process: 1.1 GB
Free memory: 1.5 GB
I also have virtual memory set to 8GB. Premiere scratch directories are on a disk with 500GB free space. I uninstalled and reinstalled Premiere, but no improvement.
Other relevant software on my machine, some of it installed after I had my last successful DVD burn:
Norton 360 2010 (Disabled Firewall and Autoprotect)
Adobe Web Premium CS3
Adobe Lightroom 2.5
Copernic Desktop Search (Disabled)
A number of free video tools, like HandBrake, AutoGK, AVISynth, VobSub, DVD Decrypter, Xvid
Tivo Desktop (Disabled)
iTunes (Disabled)
Could there be any side effect from the other software? Any potential hardware problems I should investigate? Everything else works perfectly, including the other Adobe products.
I very much appreciate your help, Premiere is unusable at the moment and I have some DVDs I desperately want to create.
Thanks,
Alex

Have you rendered your timeline?
If you're sceneline mode, switch to timeline mode. Is there a red line above your clips? If so, press Enter and let the program render your timeline (the red line will turn green).
This should greatly improve your program's stability and performance.
Also, ensure that the disc where you are storing your video files is formatted NTFS and not FAT32 (as they are when they come from the factory). FAT32 drives have a file size limit that can choke video work.
And, if this 500 gig drive is not your C drive, ensure that your C drive also has at least 30-50 gigs of free space, freshly defragmented and with its temp files regularly cleared.

IPad 2 freezes, RAM memory gets very low

My iPad 2 WiFi (ios 7.02) will often freeze when memory gets very low. A memory manager shows the RAM gets as low as 20mb. It was doing this before upgrading to ios 7. It is even worse now. No apps are set to refresh in background.

You cannot be certain at all that the freeze is memory related, otherwise it would be happening on all iPads.
Try a reset first: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
If the reset doesn't fix it, try a restore:
http://support.apple.com/kb/HT1414

Running very low on system memory message

At the suggestion of "the wine snob" I am starting this as a separate thread.
I just started tuning into this forum because on Sunday, I decided that I would try to do something with the vdeo clips that my husband took on a recent trip with a Flip ultra HD and to utilize the opportunity to start to get familiar with Premiere elements 7. The clips had already been imported into the computer, so I brought them in to PREL as files, rather than as video capture.
All day long, the program kept crashing, often preceded by the message in the title of this post (see attachment). By about 6 PM not only did the program crash, but the entire computer crashed to blue screen, ugh!!
This is on a relatively new system, purchased in April, a dell XPS 435T, quad core with 6 gb of ram and an ATI Radeon4870 GDDR5 video card with 1024 mb of video ram running Vista Home Premium 64 bit.
I was ready to pull my hair out. It made no sense to me that I should have such trouble with program and system crashes when a few months back, I was bringing in a lot of old hi 8 video into PREL, on a 4 year old laptop, with a single processor and 2 gb of ram. I made a few short video and never had these issues.
Then it dawned on me that those files all came in as avi files; the Flip video comes in as mp4s. So I googled something like "mp4 premiere elements," and it brought me to this post by Steve Grisetti:
http://forums.adobe.com/thread/437535?tstart=0
So I downloaded the suggested software and converted all of these Flip clips to avi. When I started the new project in PREL, I wasn't sure if I used the correct preset so out of curiosity, I started a new project choosing the HDV 720 p 30 preset and one last time tried using the mp4 clips. PREL crashed again after about 5 minutes if it took that long, preceeded first by the low system memory message.
So then I tried a project using the avi files and guess what. I'm going over an hour here and still have not crashed.
I think it would be helpful if those of you who have had this message could post what kind of clips you have been working on (the file format) as well as the computer specs and operating system. Maybe if any of the Adobe tech support staff peek into this forum, they will see a trend in these posts.
Regards,
Cynthia Merzer

At least you are getting this error message, as it gives one a moment to Save recent edits. At this point, I would do a Save_As and increment by say 01 so if the program does shut down, while doing the Save, you do not run the risk of corrupting your Project. If the Save_As does go well, there is nothing lost, other than the time to reboot and relaunch.
Now, I would definitely look at the "Clean, Lean & Mean Editing Machine" article. Much imporvement can be made to an editing computer, even one just out of the box. Steve G. also has several FAQ articles on optimizing one's system for NLE work and for Vista. All will be useful.
Upon delivery, most purchased computers are at about 20% to 60% of potential. There is usually a ton of bloatware that does nothing for the users, except sap resources. As we add programs, more of this "stuff" is added. As we update and the like, temp files and various elements of detritus will fill the HDD's. I know that it sounds odd that a brand new computer would be filled with "stuff" so early on, but it is a fact of life. At least most mfgr's do not still install AOL "stuff" that is of little use and just takes up room and tons of resources. Still, there are too many similar programs, that cost performance.
Good luck,
Hunt

Contribute "low on memory" and Acrobat won't redraw

I have two issues that I believe may be related. First here's my system information
WinXP SP3
Intel Core2Duo E6550 = (2.33GHz)
3GB RAM
GeForce 8600GTS 512 MB Video
Running two 19" monitors, (at 1440x900 each)
Creative Suite Premium 2.0 (InDesign CS2, Photoshop CS2, IllustratorCS2, Acrobat 7 Professional, BridgeCS2, GoLive CS2Version Cue is disabled.)
Production Studio Premium 1.0 (Premiere Pro 2, Encore DVD 2, After Effects 7, Audition 2)
Contribute CS3, (including Bridge CS3, but I don't use it, I use Bridge CS2 for everything).
First Issue. Intermittently, in both Adobe Reader 9, and Acrobat 7.0 pdf files that I have open will not display in the window properly, unless I reduce the size of the window to something quite small. It will show the desktop in behind the window, or if I open a window on top, it shows that window even when I've moved it.
The second problem is similar, but occurs in Contribute CS3 and is always accompanied by a "Your system is low on memory..." error, until I reduce the size of the Contribute window, at which point, it is so small that it becomes unuseable.
The only other program that I have open at the time is Outlook 2007, with a couple of messages.
As this is happening, I open the Task Manager, see that there is plenty of available Physical Memory, and the CPU Usage is very low, under 10%. I've set my virtual memory paging file to Custom Size of 4591MB.
The only way to fix it is to reduce the size of windows or close all the programs. These two problems occur independently of each other. Sometimes when I'm just trying to open a PDF file.
3GB should be plenty to run Contribute and Outlook, or Acrobat and Bridge.
What the heck is going on?

Thanks for the reply.
Yes I have tried that, but to no avail. The crazy thing is that it only really happens after I've been working in Contribute for a while. Sometimes an hour or more. Then it just starts doing this.
The redraw problem also affects other programs, that are not Adobe programs. For example, when I open a Remote Desktop Connection to the web server where I am publishing, while this problem is occuring, the screen will not "draw" properly either.
I have a feeling that there is something strange about how Contribute, and Acrobat, and Windows share the memory, either the system memory, or the graphics memory.
Could this also be a problem caused by having both CS2 and CS3 programs installed?
Chris

Snow Leopard 'error code 50', 'Low Application memory'. Help.

Hi.
I've been facing **** lot of problems with my MBP of late, and all that I could try have turned unfruitful. I'd appreciate some help.
Problems started when I downloaded and tried to install SL update 10.6.7 on 10.6.6. It was working fine on 10.6.6. The update failed, and I received 'error code 50' very often while deleting files from Trash. Also, 'beach-balling' became more frequent, and I had to force quit applications very often because of 'low application memory' box being displayed.I also encountered the grey screen prompting me to 'press power button till shut down and restart'.
Finally, I tried a clean reinstall but the same problems persisted, and lots of applications stopped working. I could not download files from browser (Low disk space, despite a 100 GB space available on he HD) or save textedit, Office or iWork files. I did a clean reinstall again, with zero-erase option and again downloaded the 10.6.7 combo update. The 'Software Update' application failed. I downloaded the update from my browser and it was installed successfully finally after 4 system restarts, but the 'error code 50' problem still persists.
What am I doing wrong? I've been dealing with this abnormal performance for more than a month. I haven't backed up files because there is no use making a backup of corrupt system. Specs : MBP'09, 13.3". 2.26 GHz, 160 GM, SL 10.6.7.
Please advice.
Regards.

I tried to run the hardware test by inserting the Applications Install dvd and pressing 'D' just after the chime. It did not run. Nevertheless, the App DVD is ejected every time I insert it in to install some apps, like iLife etc. Running Disk Utility dies not work, as it says the 'disk cannot be mounted'.
I tried another clean reinstall of SL 10.6, and some of the funny stuff are :
1. error code 50 yet again
2. It won't allow me take snapshots, saying 'You do not have permission to save snapshots etc.."
3. Safari cannot download files
4. 'Low Application Memory' message box appeared a few times, prompting me to Force Quit Safari.
Could there be something wrong with the Install DVD? Though Disk Utility First Aid shows error free HD verification.

Could Very Low Disk Space Cause problems?

Hi, my 600 GB Hard Drive only had around 5 GB of space left . I purchased a new 1 TB Hard Drive in order to delete media so that I could gain the space back. I've since gained back 200 GB of Space but Could very low disk space cause issues? What kind of issues could occur? Thanks
Message was edited by: Stuart Lawrence

There are any number of reasons for occasional beachballs to appear. They will appear when some programs are involved in heavy disk I/O which tends to be processor dependent and causes the program to suspend all other activity until the disk activity has completed. This is more often the case when writing to the disk. Beachballs may also appear if the OS has to use disk I/O and is slowed down by an over-filled and/or fragmented hard drive. The fuller a drive gets the greater the likelihood that fragmentation will become a more noticeable problem. Beachballs can appear if you are low on physical memory so applications must resort to disk-based virtual memory which is considerably slower and tends to cause the computer to become slow or unresponsive for a period of time. It can also cause disk-thrashing. Beachballs can occur if the disk has become corrupted causing applications to have difficulty reading from or writing to the disk.
It is possible to repair a drive's directory, and it's even possible to identify corrupted files, but it's not possible to repair corrupted files nor repair a corrupted drive. If a drive develops corrupted files either the files will need to be replaced or deleted. If a drive develops soft sector errors these can be repaired by erasing the drive (reformatting.) If a drive develops hard sector errors these may or may not be repairable, but if they are repairable it requires zeroing the data during a disk formatting operation. If the disk directory becomes corrupted that can be repaired using Disk Utility or one of the various third-party utilities such as Disk Warrior. Disk Utility can repair many but not all directory corruption problems. What DU cannot fix Disk Warrior usually can.
You can start repairing a drive as follows;
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
This applies to your startup volume. No need to repair permissions on any but a startup volume.

Hi, I'm a bit low on memory and I can't update the iOS. I need to move some photos off the iPad but I don't want to transfer them to a pc, I'd prefer to transfer them to iCloud and leave them there. Is that possible?

Hi, I'm a bit low on memory and I can't update the iOS. I need to move some photos off the iPad but I don't want to transfer them to a pc, I'd prefer to transfer them to iCloud and leave them there. Is that possible?

Yes, you could, because in this case you would have something like a backup in the cloud. BTW, personally I also like Flickr. Flickr offers you 1 TB (1000 GB) of free storage and automatic upload for photos since iOS 7 (it is a very attractive offer, at least for me)

"Bridge is running low on memory and should be restarted" error

I am running Bridge CS4 on a DELL T-1650 with plenty of hard drive space. I am having trouble with indexing / caching files. My computer is connected to a large office server with a large amount of files that I need to be able to search. I recieve a "Bridge is running low on memory and should be restarted" error each time I attempt to index the files on the server drive. I have tried Purge and Cache, set the cache memory slider to max. This is a very large amount of files (TB ) to index /cache. I leave the computer running overnight to allow ample time, I nothing on my TB hard drive , and have 16GB of available RAM. Any ideas?

…My computer is connected to a large office server…
Aha! Working over a network is not supported by Adobe.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

% CPU is consistently very low, never reaches over 30%. Nothing gets more than 5% anytime!

I used to have the problem of over 100% CPU usage all the time, but the last few months, it's been the opposite problem. %CPU is never above 30%. Individual apps never get more than 10% ever, and it's more like 3-5% at any time. System and User apps are getting the same treatment.
I see Index running constantly, and all applications hang after every click or swipe.
I've verified and repaired permissions numerous times. Every time, there seems to be these little errors.
What could I try?

Problem description:
CPU % Usage is very low all the time. Even when I have many operations running, and many of them are usually high-CPU users.
This is the EtreCheck profile after having rebooted 2 times. It seems like it is running a little better now, but it still took 15 minutes to boot up. But apps are now running sometimes in the double digits!
EtreCheck version: 2.1.8 (121)
Report generated March 30, 2015 at 6:06:14 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Check Battery - Cycle count 389
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        LED Cinema Display 1920 x 1200
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 0:14:8
Disk Information: ℹ️
    TOSHIBA MK2555GSXF disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 249.20 GB (30.88 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Toshiba External USB HDD 500.11 GB
        EFI (disk1s1) <not mounted> : 210 MB
        Beechwood Videos (disk1s2) /Volumes/Beechwood Videos : 499.76 GB (13.83 GB free)
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Inc. Display iSight
    Apple Inc. Display Audio
    Apple Inc. Apple LED Cinema Display
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Adware: ℹ️
    Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [loaded]    com.divx.dms.agent.plist [Click for support]
    [loaded]    com.divx.update.agent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.rim.BBLaunchAgent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.rim.BBDaemon.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [running]    com.Installer.completer.download.plist [Click for support]
    [loaded]    com.Installer.completer.ltvbit.plist [Click for support]
    [loaded]    com.Installer.completer.update.plist [Click for support]
User Login Items: ℹ️
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    GrowlHelperApp    UNKNOWN (missing value)
    iTunesHelper    UNKNOWN Hidden (missing value)
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 537 - SDK 10.9
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.0.788 - SDK 10.6 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 9.5.4 [Click for support]
    GarminGpsControl: Version: 2.9.2.0 Release [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 55 Check version
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    WebEx: Version: 1.0 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Growl [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.20 GB Disk used: 218.32 GB
    Destinations:
        Data [Network]
        Total size: 0 B
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Too small
            Backup size 0 B < (Disk used 218.32 GB X 3)
        Time Capsule backup [Network]
        Total size: 1.40 TB
        Total number of backups: 58
        Oldest backup: 2014-11-13 05:01:04 +0000
        Last backup: 2015-03-30 00:57:07 +0000
        Size of backup disk: Excellent
            Backup size 1.40 TB > (Disk size 249.20 GB X 3)
Top Processes by CPU: ℹ️
        12%    WindowServer
         8%    repair_packages
         5%    Microsoft Entourage
         1%    SystemUIServer
         1%    Disk Utility
Top Processes by Memory: ℹ️
    653 MB    firefox
    232 MB    mds_stores
    149 MB    repair_packages
    137 MB    com.apple.IconServicesAgent
    77 MB    Finder
Virtual Memory Information: ℹ️
    3.99 GB    Free RAM
    2.43 GB    Active RAM
    1.13 GB    Inactive RAM
    769 MB    Wired RAM
    601 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 30, 2015, 05:48:25 PM    Self test - passed

Error Msg: Running low on memory.

I keep getting this error msg: 'Bridge is running low on memory. It is recommended that Bridge is restarted.' I am running a Mac OSX 1T and also use an external hard drive. I purged cache for the current folder, purged cache in ACR, tried refreshing my preferences by hitting option when opening Bridge, and raised my cache size to about 250,000 and nothing has worked! Please help!!!!!
Julia

jacnjules wrote:
…What can I do to free up space?
Again, Julia, RAM is not drive "space" you can just "free up".
You have given us no information whatsoever about your setup and the exact versions of the applications and the OS you are running.
Depending on what you have, you may or may not be able to do anything other than add more memory (RAM) to your computer, if the machine can support more.
For instance, I run Photoshop and Bridge very comfortably with just 2 GB of RAM, but—and that is a huge BUT—I'm running Photoshop 11.0.2 under Tiger (Mac OS 10.4.11), and I have permanently disabled the abominable, intrusive Spotblight and the Dashboard on my ancient G4 Power Mac (PPC) machine. I even get away with occasionally running Illustrator or InDesign simultaneously as well. On the other hand, many folks who are running the latest versions of Photoshop and Bridge (CS5) under Snow Leopard (a.k.a. Slow Leper) feel that 8 GB is pretty much the bare minimum to run them these days.
Users who have 32 GB of RAM and more have no complaints.
Wo Tai Lao Le
我太老了

Sony Xperia E C1504 - Low Phone memory - only 54 MB free Memory on phone after update

I am using Sony Xperia E c1504 phone and facing memory problem. The downloaded applications are already moved to SD card and some of the inbuilt applications on phone are also moved on SD Card. Now there is no application which I can move on SD card by the simple way given in phone. Also I regularly cleans the cache by cleaner. All my photos are saved to SD card, no videos are taken so no problem of video memory. I have moved every possible element on SD card.
In this condition when I downloaded the new update of phone, it installed some more new applications like Google books, google movies, google games, google magazines etc. on my phone which have no option to move to SD Card. So my phone memory is very low. I uninstalled one inbuilt application Cricbuzz but still my phone is showing only 54 MB free phone memory. Now I can't update some applications due to low space on phone though I have 1.79 GB on internal storage free and 14.73 GB on SD card free memory.
Now how to manage these applications? Is there any way so that I can move some more inbuilt applications to SD card?
And what is rooting? please explain. Can I move applications on phone to SD card by rooting? If yes how?
Is there any other way to solve this problem?
I am new to android technology. Please help.

http://forum.xda-developers.com/xperia-j-e/general/how-to-root-sony-xperia-e-c1504-c1505-t2683278
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Very low on memory

Similar Messages

Maybe you are looking for