Very low quality camera CY-STC1100

I'm testing the camera CY-STC1100 on TV UN40ES6500, both by Samsung. But the quality is the worst ever.
Signal quality always is lowest, see:
More info:
TV Firmware = 1010.1, last for my region (Brazil).
Skype for TV version : 2.0
Internet connection: vdsl2 35/3Mbps GVT ISP.
Connection type: wired or wireless, tried both.
Skype tested on TV and a notebook on local network (same physical connection/router/location).
Any hint to get better quality? I contacted the Samsung support by phone and they said nothing useful, only fake information to get rid of me, "Skype has system issues today, test again tomorrow". Amateur support.
The camera is 720p only for marketing?!
Thank you guys!

I am sorry to hear you are having problems with Skype on your Samsung TV.
That call quality indicator is actually an indicator of network strength and is not hardware dependent. It sounds like you can place a Skype call on another device from the same location (room)? Can you access other network applications in the Samsung Smart Hub (stream video, for example)?

Similar Messages

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

Rendered video very low quality

My camera shoots in MTS format. I converted the file to mp4 and edited it. I then imported that footage into After Effects and when I tried to render the video it was very low quality. I made sure the composition settings and render settings matched that of my video. I tried saving it as H.264, mov, avi, m4v, and mpeg2 non of which were good enough quality to use. The avi format came close in quality for the video but everything seemed to move in slow motion. The audio played perfectly though. I also tried rendering video directly from the MTS file and it still didn't work.
Is there a specific way I should convert or encode the file? I tried some different settings within Adobe Media Encoder but when I brought the file into AE and tried to render I got the same issues of it being low quality.
This is for a client so it's very important that I get the needed effects added to this video. Thanks in advance for any help!

I understand how After Effects rendering works and different file types. I just wanted to try rendering in different formats just make sure I hadn't missed something. I figured something out that came close to the quality I need so I guess it will have to work.
My original MTS file is 1920 x 1080 and 29 fps.
I rendered it with these settings originally
NTSC, 1920 x 1080
29.9 fps
Bitrate CBR 30 Mbps
The file came out choppy and noticeably lower quality.
The last time I rendered it with these settings:
NTSC, 1280 x 720,
59.94 fps
Bitrate CBR 20 MBps
The quality was much much better. It still had a little distortion with a lot of movement but it was much more bearable so I guess that's what I'm going with. If anyone knows of any better settings it would be greatly appreciated! Thanks.

After import from Iphoto some pictures are of very low quality. The original file in Iphoto is very good.

Final cut Express
I imported several pictures by using Iphoto. Some of them, not all, are of very low quality even if the original file is of a very good quality.

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

Importing high quality video through a lower-quality camera

(Final Cut 5 in a G5, 10.5.8)
The camcorder I'm using to shoot video for my Final Cut projects is a Panasonic PV-GS400, a good 3-chip mini-DV camcorder that shoots high-quality DV (original price $1500).
I would prefer not to use this camera to play the video into Final Cut, to save wear and tear on its tape drive (with tape, of course, one hour of recorded video takes one hour to play into Final Cut).
I have an inexpensive little Canon Elura 100 Mini-DV camcorder (original price $400) that could be used to play the tapes from the Panasonic into Final Cut, but if I did that, would the higher quality of the Panasonic's video be degraded to the lower level of the Canon's video when passing through?
To put it another way, can a Mini-DV tape with high quality video on it be imported through a relatively low-quality camera into Final Cut and still retain its high quality?
Thanks for any help.
Tom

Thanks much, guys. Yes, I'm using firewire. Glad to hear there's no loss of quality when the video is strained through a lesser camcorder on its way into Final Cut.
So now I'll go ahead and use the little Canon Elura as my playback/ingest camera with no worries.
I appreciate the help!
Tom

DVR replay on the non-DVR STB - very low quality

I started recording a football game on the DVR, and about 45 minutes later I began to watch it on the non-DVR setbox in another room. The quality is very low: every 10 seconds (almost exactly) the picture gets very choppy, stops and starts.
On the DVR itself, the replay is good.
Is this a known problem with the STB?

Have you attempted re-booting both STBs?

Nokia 6700 low quality camera

don't know reason why my mobile camera has low quality even it has 5.0 megapixel
i check at camera setting but no way how to make it better
any suggestion

The number of megapixels affects the resolution of the picture only, other influences affect quality too.
For instance, the 6700 only has an LED flash, so it will naturally be poorer quality in low light conditions than a phone with a xenon flash. If you could define what exactly you mean by low quality, we'd have more chance of offering an answer.

All fonts coming out very low quality

Hey all,
I'm having a problem, and I think I may have inadvertantly changed a setting in Pohotoshop CS3. What is happening is that when I'm dealing with images 1000px (width and height) or less, all of my fonts are coming out in very poor quality, almost square like. I'm not sure what setting controls this, but it just started happening recently. Here's a screenshot of a 900px wide image of some text, 300pix/in: http://imgur.com/TD864
I would greatly appreciate any help.

Check your anitaliasing, mine is set to sharp in thsi screenshot. You need to switch to the text tool to access anti-aliasing.

Still images have very low quality

When I import images into Final Cut Express they are pixelated and look very bad. When I open the same image in Preview the image is displayed at full quality. How can I fix this? I am running Final Cut Express 2.0.3.
Thanks for your help
iBook G4 1.2GHz 768MB Mac OS X (10.4.3)

Yes, I am looking at the output rendered on a monitor.
Are you saying that my vidieo is compresed?
How might I uncompress it?

Very low quality after using OCR

Hello,
I am using OCR in a couple of documents which have tables I want to export to an excel document. The issue is that the letters after using OCR, are hardly legible. Hence, the text is not well detected and I can´t reply it on the excel document.
Thank you very much.
Kind regards,
Hugo Hernández

Hi Hugo_16,
I would recommend you to use High quality scan settings while scanning the document and then try running OCR again on the same document.
Here are few relevant links that might help you with this issue, Please have a Look:
Acrobat Help | Scan documents to PDF
Adobe Acrobat quick tips and best practices for Optical Character Recognition (OCR) | Technical writers' tool kit
Please let me know if issue persists.
Regards,
Rahul

Transfoming an Image-coming blurred and very low quality

hi all, i am new to indesign software and designing a document and the output of this will be a pdf. I have inserted an image into my document file and tried to transform it but i was unsuccessfull in this. the image came blurred and it does not have the quality. the Image format is jpeg. I have also tried inserting an image inside the allocated frame but still the problem is there. pls suggest..
Regards,
Vikas

Patience... A search of the forum would find that this has been discussed to death.
View>Display Performance>High Quality Preview.
May I suggest you invest in a good book? Sandee Cohen's Visual Quick Start Guide is a must for beginners: http://amzn.to/9w1Mh0
Best $20 you'll ever spend.
Bob

Final Cut Pro exports very low quality video to DVD

I tried exporting a timeline to a DVD from Final Cut Pro X 10.0.3 today. Every clip in the timeline was 1080x1920, but the DVD export menu insisted (without offering an option to change settings) that Final Cut export at 720x480. The Blu-Ray menu offers 1080x1920 exporting, though. Is there any way to get the app to export to DVDs at 1080x1920?

Yes, you can create an AVCHD Disc which is basically Blu-ray quality on a cheapo standard DVD.
Select Share>Blu-ray and in the window that opens make sure the Output Device is your DVD burner, not the hard drive.
Note that you will only get about 35 minutes at the highest quality.
If your video is longer the data rate will be reduced but should still produce good quality hi-def up to an hour or so.
You must play the DVD in a Blu-ray player. It will not work in a normal DVD player.

IMovie HD 6 rendering very low quality

I've tried exporting this movie several ways, from Full Quality to compressed and the video is poor. That is, during transitions, there is jumps in the brightness of the picture. And some of the rendered dissolves are simply not smooth, but "digitized" looking (like a bad YouTube video... actually, they're all bad).
Anyone know a secret in rendering that I'm missing? The movie is a combination of stills and some video.

I think your problem is that you are rendering in iMovie. Doing a search will turn up posts regarding this. Here's one http://discussions.apple.com/thread.jspa?messageID=7588332&#7588332
Don't export/render from iMovie. Just close it and import it from iDVD and let iDVD do the rendering.

[SOLVED] Images being rendered in abnormally low quality

Hi guys,
I'm not entirely sure what the issue is since I don't usually play around with image {libraries,software,etc} on Arch, but I have noticed recently that images on Arch, regardless of WM/DE, have been rendered (drawn?) in very low quality.
http://i.imgur.com/Qemaa.jpg
(Changed from image to URL, resized image didn't show what I wanted it to.)
For example, in this screenshot, you can see artifacts around the fonts and icons that normally shouldn't be seen. I took the same image with both scrot and xfce4-screenshooter, and both images look exactly the same. I'm not sure if there's something really obvious I'm missing or what, but I'd appreciate some sort of guidance.
Regards,
azrael_
Last edited by azrael_ (2011-09-19 17:45:18)

lolilolicon wrote:You mean jpeg artifacts? Just take screenshots in png format...
I tried taking the images in PNG format and they still came up low quality.
EDIT: Nevermind, I didn't realize scrot had a quality switch. Disregard this entire thread, it's 2 AM and I'm tired!
Last edited by azrael_ (2011-09-19 04:52:44)

Lightroom 4.1 low quality image in develop module

Hi all, i have a macbook pro with retina display, in my lightroom 4.1 the images in the library look normal but when i go to develop module the image is blurred and very low quality. In settings the rendering are high quality 2048 1:1
Any way to fix this? Also in my external monitor i notice this thing with minor loss.

This probably won't help you but the preview settings don't affect the Develop module. In Develop the image is rendered from the raw data.
Are you seeing this with raw files? JPEGs? Is it a huge camera file?

Very low quality camera CY-STC1100

Similar Messages

Maybe you are looking for