Very low sound

Just purchased Mini Notebook NB205-N230.  I am very disappointed in the sound quality.  All the speaker icons indicate they are at 100% and nothing is muted.  What do I do?  Thanks

It appears the NB205-N230 uses some form of Realtek audio drivers. If this is the case check for and enable "Loudness Equalization" on the Speaker Properties. This has helped improve the low audio levels on other Toshiba latpops. Under Windows 7 Home with the Realtek HD audio drivers the "Loudness Equalization" check box can be found on the Control Panel --> Hardware and Sound --> Sound --> Speakers (select Speakers then select the Properties button) --> Enhancements tab. "Loudness Equalization" is found under the enhancement options list (may have to scroll down the list to find it). Another way to enable the "Loudness Equalization" option if you find a Realtek Audio Manager icon under the Hardware and Sound page, is to look on the Sound Effects tab of the Audio Manager and enable the "Loudness Equalization" check box and click OK to save the settings.
Other suggestions are to update the audio drivers from either the Toshiba support site or from the Realtek site and enable "Loudness Equalization" if the option is available. On my L505 series laptop the default installed audio drivers and the updated Toshiba ones both exhibited very low audio. Uninstalling the Toshiba version that came with the laptop and installing the Microsoft generic audio driver or installing the latest Realtek drivers from Realtek and enabling "Loudness Equalization" helped improve the system sounds audio volume level.

Similar Messages

  • I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Very very low sound in internal speaker

    Hi I have satellite A505 S6005 some days ago its internal speaker did not give sound today i realize that very very low sound is coming in right speaker. i aleady reinstall realtek latest version and re istall the bios version 1.4 kindly help me

    Don't forget to check the physcial volume control dial on the side of the laptop. Not easy to see, and many people aren't aware that it exists. I had a low volume problem and was pulling my hair out for a day or two until I realised it was there.

  • Qosmio X500 - Very low sound

    Hello everyone!
    I have a problem with my new Qosmio X500. Its speakers produce a very low sound, especially when I'm using Guitar Pro. Please, tell me, if it can be improved somehow. Thanks a lot!

    Have you tried adjusting the speaker enhancements? This Increased the volume quite a bit for me.
    Open "SOUND" from the control panel, on the "Playback" tab double click "Speakers" This will bring up the "Speaker Properties" box. Go to the enhancements Tab. "Loudness Equalization" made the biggest increase for me.
    Mark

  • Very low sound volume on Portege R500

    The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
    So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Hello, and thanks for answering.
    Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • Speaker very low sound

    The speaker of my HP slate 10 is very low...please help me!
    This question was solved.
    View Solution.

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you.
    It looks like you are having difficulties with regards to the volume of the Table [HP Slate 10]
    Please try rebooting the Table once to check if that resolves the issue
    OR
    How does your Slate perform with just audio files using the Play Music app?  And, have you tried playing a movie trailer from Google Play?  Just tap on a movie title and play the trailer by tapping on the > arrow.
    What about if you use earphones?
    Do you ear system sounds?  Go into Settings>Sounds>Touch Sounds where there is a checkbox on the right indicating whether Touch Sounds are on or off.
    The speakers on the Slate aren't all that, but they do produce sound that's loud enough to listen to TV shows and movies.  If you can't get enough volume from them with other apps such as Play Music, there may be a hardware issue.
    A couple other suggestions...try restarting it.  And back to earphones, try inserting an earphone plug all the way in, and removing it.
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Headset speaker very low sound

    i've been using my iphone 4s for 3 months now and i don't have any problem in these 3 months. now the headset speaker is very low, whenever i spoke to somebody i turned on the loudspeaker, sound is there but it's too low, this happens after upgrading to a new software IOS 5.1. please help!

    Turn the volume up.    

  • [SOLVED] Very low sound level after installing kernel26-2.6.30

    I can't see this issue anywhere, so I'm sorry if I duplicate it here.
    Since the upgrade to 2.6.30, the sound on my desktop system (VIA P4M890) is very low.  (I also have a Thinkpad with an Intel GM45 chipset, and this is working like a charm.)
    I'm using a very simple ALSA configuration.  There is sound, but it is just almost inaudible.  I've set the highest possible level in alsamixer and when I turn up the volume to the maximum, I can hear sound.  But it is very weak and not very clear.  It's not related to hardware failure: rolling back to 2.6.29 fixes the problem.
    Did anyone detect the same issue?
    Last edited by quickfished (2011-04-05 05:52:49)

    quickfished wrote:
    fukawi2 wrote:I had a similar problem, but then found there was a new channel in alsamixer for "Speaker" which needed to be turned up...
    Alright mate, thanks.  Let me try that.
    In fact, I didn't have that new channel, but I set the VIA DXS mixers to 100% (like described here: http://alsa.opensrc.org/index.php/Via) and now everything is working.
    Great!

  • Very low sound output

    hi, I have just got a 2nd hand g3 dual usb ibook and its very nice.
    except the sound is very very low, even wearing headphones i cannot follow spoken word etc
    levels are at maximum both in the sound control panel and in the individual apps - ie iTunes, real player etc
    any ideas?
    thanks
    N

    Try resetting the PMU and see if that helps.

  • Very low sound volume on Skype, but OK on everything else

    I know this subject has already been raised but I have tried all the suggestions on other posts on this topic, but still the volume of Skype is very low. I can only hear the conversation in a very quiet environment. The same low volume applies when I check the sound in Skype or do a test call. I am using an Acer laptop (built in speakers) and Windows Vista which is up to date. All sliders on the sound mixer are on 100% and the box Automatically Adjust Speaker Settings in Skype is unticked. I am using a recent version of Skype (installed about a month ago) The sound volume on iTunes and other applications is absolutely fine! Please keep explanations simple, I am not a computer expert... Thank you!

    Skype was working then became very quiet.I am on Win7/64 Creative soundcard, Latest Skype
    The solution (for me) was simple.
    Go to: Skype>Tools>Options>Audio Settings>Speakers
    In my set up there is a dropdown to select what speakers Skype should use. It was using Digital Audio Interface There was also another option called "Speakers" I chose speakers and the volume returned to match the rest of the system
    How it got set incorrectly is a mystery. I guess "Gargy Watts" must have set it, as my old mum used to say... or the Skype Fairy has been fiddling, as I have other things on my mind rather than fiddling with Skype settings and I'm the only one to use the PC!
    I hope this helps some of you guys and gals 

  • Nokia E7 Very low sound coming out , is it a ringe...

    my nokia e7 's sound is very very low barely heard , i have to put it ony my face to hear the musicor handfree calls
    i want to replace the external ringer but want to make sure first that its not a motherboard problem ,
    is there any way to know whats wrong with it ?
    and recently i noticed that the callers sound in phone call , handset , has gone low too , so does it need replacement too ? or does that indicate thats a motherboard problem ?

    Your best option would be to send it to a Nokia care point for inspection,you could try a hard reset if you like first but remember to back up data.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Very low sound in my notebook.

    My notebook model number hp15 ac048tu has very low volume even when everything is at max. While headphones work flawlessly, notebook's speakers aren't good enough to watch a movie or play games with full volume. Please suggest some solutions to it.

    My HP stream 7speaker volume is set at 100 and its terrible, you cant watch a video for trying to hold it to your ear to hear it.... ive run the troubleshooter have had no success, it would have to supposed to be louder than it currently is

  • Very low sound through head phones!

    Anyone come across the very low volume level throgh any head phones on the new classic and nano?????
    So much quiter than all the other ipods??????

    There has been some discussion on the Classic having a lower overall volume than older iPods, especially if you have one that has a volume cap (if you live in and/or bought the iPod in Europe).
    It also depends on what headphones you are using. Higher impedance means a lower volume output.

  • Very low sound when I connect guitar

    Hello
    When I connect my guitar to logic via fast track ultra I can barely hear the sound, it's so low. Instead I have to use logic plugins make it sound at normal volume. How can I get this normal?
    Kind regards
    Frankensten

    My guess is you're not plugging into a Hi-Z input.
    In other words, when DI recording a guitar, because the signal is naturally very quiet, a line level input is no good. Many interfaces these days have a designated Hi-Z input, so check (I'm not familiar with yours). If you don't have this option you can buy cheap units (DI Boxes) that do the job.
    This should solve your problem and give you the right amount of gain.
    (Again, don't rule out volcanic ash)
    Message was edited by: siderealxxx

  • Speakers very low sound despite on highest settings

    Hi
    All my software is up to date but suddenly a couple of days ago the speaker sound became extremely low on some youtube videos - to the point where it is virually inaudible. If I go into youtube directly the sound is fine. If I launch Youtube from gmail (using firefox), or from facebook, the sound is basically non-existent. From gmail or fb if I select to view the video in youtube, the sound is still non-existant.
    After searching on here I found a thread that I followed (that I unfort can't find now but the creator was Travis):
    I reset PRAM, did a safe boot, and checked/repaired permissions.
    There seemed to be a lot of issues when checked/repaired permissions which is worrying.
    Speakers work fine with CD,
    Is there something going on with Firefox?
    As I said all software is up to date.
    I am not a technical person but I can follow instructions to the letter!
    This computer is only 4 years old, but realistically, is it just at a point where it is 'old' and I need a new one? Or is there someway of fixing this sound?
    Thanks!

    I presume you are talking about Built-in speakers. If you are not, please post back.
    When you use gmail to launch Firefox to go to YouTube to play Videos, it is hard to decide whose soundsettings you may be dealing with.
    System preferences > Sound...
    ... has the main sound level setting. Volume is also controlled by pressing sound-up or sound-down or Mute buttons on the keyboard.
    The player you are using, such as Firefox, may have an additional setting in its Player window. If you wiggle the mouse along the bottom of the window, you may see an additional Volume control there.

Maybe you are looking for

  • HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!

    Dear all, Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll. Please Help!!!! Vj

  • CUP 5.3 SP8 - Language Settings/Language on Requestor Screen

    CUP Experts/Users, We are on CUP 5.3 SP8. There are several issues related to language settings within CUP. Our default language in Configuration->Miscellaneous is English. - When a Requestor logs on to create in a language other than English, most o

  • How to import complete library with folders, into iBooks?

    I have a few folders with books on my macbook and i want to import them all in iBooks. Need to keep the folder structure; for example, -Health -Education -Finance The books are in folders  and i want to import them all at once (about 100 books) Why w

  • Not seeing videos online

    I am unable to see the videos from online sites. I hear the voice perfectly but not picture. What do I need to do?

  • Detecting keys

    Hi all. Does anyone of you know how can i detect if 'Caps Lock' and/or 'Num Lock' on the keyboard are on? Once i've detected it subsequent changes will be handled by a listener but i'm stuck on how to detect if those keys are active when i first run