Very low sounds from iPad mini

Is anyone concerned about the lack of volume on the iPad Mini?

Use powered Bluetooth speakers e.g. Bose Soundlink
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/59362afb82a5620f08d 2bda9073fedb3.jpg

Similar Messages

  • Very, very low sound from MSI K8N SLI Platinum

    The sound from my MSI K8N SLI Platinum nForce 4 is so low that i must set the volume control on max and the speakers on max to hear anything. I tried other speakers with the same result. The speakers are amplified.
    What can i do?

    Well for a start you could search the forum as this problem is now well known. I'm not getting at you but I know how frustraing it is wanting someone to respond with an answer, and you don't have to wait if the problem has already been discussed!
    The problem is that MSI decided to specify that the 24 pin supply must have -5v to support the creative chip. This is in contradiction to atx 2.2, and other PSU specs for 24pin supplys, which say the pin in question is NC (no connection).
    What you need is a dual standard 20/24 pin supply.
    Theres is a FAQ about this on the diamond forum, but I'm not sure if unregistered Platinum SLI users can read them anymore!
    According to the FAQ MSI are promising US diamond users the chance to RMA their diamond boards when modified boards whcih don't require the -5v supply are availble. This isn't much use to us european Platinum SLI users.
    I have a Tagan 480w which is dual standard 20/24 pin supply.

  • I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Why you sent very little q'ty iPad mini to Thailand market.?

    Why you sent very little q'ty iPad mini to Thailand market.? It have many people in Thailand interested iPad mini in Thailand but Can't buy it for reseller or operators .  Are you know have many people angry when went to the reseller to buy iPad mini . Your reseller company said that have iPad mini  but you can't buy it .they was booking by some people . Some branch have some people see a person to take ipad mini 5-6 pcs. That talking in www.pantip.com it don't fare for customers it may be MBK retail shops to take them form every your reseller and operaters branches , in every time when have the your new interested products such as 1st lot iPhone 4S , 1st-2 nd lot iPhone 5 had come to Thailand .
    I think this problem come from Don't have Apple store in Thailand to control supply goods per peson in product 1 st lot .I would like to tell you  If you come to Thailand now ! You can see many Thai people use iPhone around you when you walk in the streets  . You can't count sell q'ty form your reseller or operater because in the first product(iPhone ,iPad ) opening period MBK. retail shops import many q'ty iPhone ,iPad  by themselves from USA ,Hongkong in many year . And then when your reseller and operaters 1 st-2nd product caming the retail shops took the 1st product lot from your reseller everytime . The retail shop added price in the first product opening period. It don't fare for Thai customer.
    I don't so good in English but I need to explain you.

    Your post is a hoax.  There are plenty of iPad Minis in Bangkok.  The vast majority of the vendors in MBK are not authorized dealers, and are forced to purchase black and gray market goods for end users.  If you want an iPad Mini, go to the nearest iStudio, located in the Digital Domain - just down Rama I, across the street for the Siam Paragon shopping center.

  • Qosmio X500 - Very low sound

    Hello everyone!
    I have a problem with my new Qosmio X500. Its speakers produce a very low sound, especially when I'm using Guitar Pro. Please, tell me, if it can be improved somehow. Thanks a lot!

    Have you tried adjusting the speaker enhancements? This Increased the volume quite a bit for me.
    Open "SOUND" from the control panel, on the "Playback" tab double click "Speakers" This will bring up the "Speaker Properties" box. Go to the enhancements Tab. "Loudness Equalization" made the biggest increase for me.
    Mark

  • Very low sound volume on Portege R500

    The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
    So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Hello, and thanks for answering.
    Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • How do I transfer photos from iPad mini to SD card for backup?

    How do I transfer photos from iPad mini to Sd card for backup?

    You can copy photos from Camera Roll to a wireless flash drive (Micro SD Card)
    http://www.sandisk.com/products/wireless/flash-drive/

  • Is there an app for video playback on external screen from ipad mini which avoids mirroring?

    I want to play fullscreen video from ipad mini to external screens with a clean look and without without showing playback controls etc. I need to be able to play, pause, change the order of video tracks without affecting the external display as it's for playback of video backing tracks for a music show.
    Does anybody know of any apps which do this? I'm looking at Portfolio for iPad at the moment which looks promising.

    No.

  • Very very low sound in internal speaker

    Hi I have satellite A505 S6005 some days ago its internal speaker did not give sound today i realize that very very low sound is coming in right speaker. i aleady reinstall realtek latest version and re istall the bios version 1.4 kindly help me

    Don't forget to check the physcial volume control dial on the side of the laptop. Not easy to see, and many people aren't aware that it exists. I had a low volume problem and was pulling my hair out for a day or two until I realised it was there.

  • How can I copy music from iPad mini to iPad mini using home sharing??

    How can I copy music from iPad mini to iPad mini using home sharing??

    SHARING iTunes MUSIC
    http://macmost.com/five-ways-to-share-music-in-itunes.html

  • How do I imput photos and videos from ipad mini to computer - help

    how do I imput photos and videos from ipad mini to computer - help

    You don't need to double post with the same question.
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • Can i delete an hd downloading movie from ipad mini

    Can I delete a downloading hd movie from Ipad Mini?

    You can try. Tap on the movie icon or progress bar to pause the download, then try swiping across the progress bar or hold down on the icon to get the X to delete.

  • Mistakenenly Synched from Ipad mini to PC, when I wanted to TRANSFER

    I made several movies using imovie on the ipadmini.   The imovies use both still photos AND mini videos taken with either the iphone or the ipad mini. 
    I wanted to put the finished  imovies  on my pc to optimize playback with quicktime. Mistakenly, instead of transferring photos/movies from ipad mini onto PC, I connected with Itunes on my PC, and chose the Sync option.  Aaaargh.  It put a bunch of photos onto the Ipad mini I had taken OFF, prior to making the movies.   Then, the worst part is,  the completed imovie videos on the Ipad mini, are MISSING the video clips in the imovie.  It's like they disapperaed when I did the Sync.
    Where are the missing video clips?  On my computer?  On I cloud???  How do I find out?  In the best case scenario, I would like to "find" the stuff that got "lost" when I synched the folder on the computer to the ipad mini,  and have my IMovies restored to how they were before.
    Please help!

    Okay, I figured out that Windows has "AutoPlay" settings which can automatically download photos and videos from a newly connected device, such as an iPad Mini.  I think I could open it in Windows Explorer too that way but the auto download solved my problem.

  • How do I print from iPad mini?

    How do I print from IPad mini?

    Hi Bowieessence,
    I understand you have a Deskjet 3054A and would like to use it to AirPrint with your iPad mini. I will certainly do my best to assist you with this!
    I will recommend that you have a look at this How to Use Apple's AirPrint Over a Wireless Network document and it will give a couple troubleshooting steps in the last few questions. For the most part you just need to make sure both the iPad and the printer are on the same wireless network.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for

  • Help needed to find right settings on custom built PC tower

    Hey guys, this is my first ever post on here, so i dont know what to expect. Well just recently i decided to build my own PC tower, for a complete noob, id say i did a relatively good job, with this in mind i know nothing about building PC'S and matc

  • How to send digitally sign S/MIME messages with Powershell cmdlet Send-MailMessage?

    Hello, using AD Windows PKI I assigned a certificate EKU (1.3.6.1.5.5.7.3.4) to sign emails and get this with autoenrollment also to my CERT Store PS CERT:\CurrentUser\UserDS\ or the certificate could found via MMC / certificates in the store structu

  • Error PLS-00049 Bad bind variable

    Hi I just want to test a simple procedure and getting PLS-00049 error: CREATE OR REPLACE PACKAGE BODY test_pkg AS PROCEDURE bind_varibales AS v_name TEST.NAME%TYPE; v_tmp NUMBER; BEGIN v_name :='TEST_01'; SELECT COUNT(*) INTO v_tmp FROM TEST WHERE TE

  • How do I put a different image in my drop down menu for my current page?

    Is there a way to put different images or color for each buttons in my menubar? And is there a way to have a color to identify the current page in my bar? Thanks for your time and have a nice day!

  • Exporting acrobat fields into Word 2007

    Hi all, I have a client who had an adobe document on his website which user fill out and then submit using Outlook. He now wants to create a form letter (in Word 2007) by using the data that the users submitted on the acrobat document. In a nutshell,