Very Minor Bug 1.4.1 Presets & Sync

Probably more of an oversight that a bug in 1.4.1. Color Noise Reduction setting is not available (no check mark) when saving a preset or syncing when you are doing it from a grayscale image. Probably something left over from the previous version that did not allow Color Noise Reduction in grayscale images.

Color Noise Reduction settings are available for grayscale images in the Lr2 beta.

Similar Messages

10.6.8 Two Very Minor Bugs

Two minor problems following the update using the combo install:
On startup the Apple logo splash screen no longer recognises the fact that my monitor (Dell 2408WFP) is widescreen and I get black bars down the sides.
Secondly, and most importantly, Minions of Mirth no longer works properly. Actually, one hears the startup sounds and hears it in the background but it is completely invisible. Dang!
(I remember the same issue occurring several years ago after another OS update but no one else in the game's user forums has mentioned it this time.)
Ok, my system is long overdue for a complete wiping and probably these minor issues will go away after I do a total disk wipe when Lion is released - but the truth is I've nothing better to do....
k

Hello:
I am not argumentative (usually), but the monitor issue is a Dell one - not Apple. The game issue is also the developer's, not Apple. I hate to sound pedantic, but neither Apple (nor any other operating system developer - translate Windows) can possibly assure that all third party hardware and software will work with a new release. I do know that Apple makes versions available to developers prior to general release.
FWIW, "wiping" a system is a Windows approach and almost never is required on an Apple platform.
Barry

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
Any ideas?

I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
The problem is dependent on the state of both settings.
The spacebar in Mail "works" if I have either of the following setting combinations:
Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
Other combinations FAIL
Keyboard: smart quotes ON, Mail: Check spelling NEVER
Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
Thanks.
Todd Smithgall

How to Lock a Transaction for Editing AND VERY minor tab cont. help

Just two things I need to ask about
1. How to Lock a Transaction for Editing
I am currently using the fcode ENQUEUE_E_TABLE. The function works as once the transaction in opened, another cannot access it.
However, I have two modes in my transction (Display and Edit). What I need to do is If another user has already opened the transaction, the other user can still access the transaction but cannot access the edit mode.
 2. VERY minor tab cont. help 
I noticed in a table control is being used in a transction you can resize a colunm. How do you disable this ?
and how do you resize the horizontal scroll bar so that you can limit scrolling upto the point where there are field columns?
Thanks for you help ppl and take care

Hi chad,
This link will help u know abty different types of locks that are available:
http://help.sap.com/saphelp_erp2005/helpdata/en/7b/f9813712f7434be10000009b38f8cf/frameset.htm
For resizing all u can go to the table settings and u can do it.
Hope tis helps u,
Regards,
Nagarajan.

Ampersands in component names (very minor issue)

This issue is not creating any problems for me, just something I have observed. When an ampersand (&) symbol is inserted into a component name, the ampersand is not actually displayed anywhere once the change is made, but what appears to be an underscore (_) appears instead. A space also appears at the beginning of the component name within the Object Browser. Obviously a very minor issue but thought I should report it.

Well, for what it's worth, this is what I get at this moment when I attempt to view this thread while logged in under Firefox 3.03:
An error in the system has occurred. Please contact the system administrator if the problem persists.
type: java.lang.NullPointerException
java.lang.NullPointerException
     at jsp_thread_2d_flat1226300463732._jspService(jsp_thread_2d_flat1226300463732.java:556)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
code}
It's actually a very long block of code. When I refresh, sometimes no posts are displayed at all here.

Very strange bug: random keyboard disposition

Hi,
I just experimented a very strange bug. I have Arch installed with the XFCE desktop and Firefox3b05 from unstable. I was reading my favourite austrian newspaper online: http://derstandard.at. There's the possibility to post messages under the articles, so I clicked on "Post", and suddenly, within the posting window... my keyboard disposition went crazy. Instead of "a", I had a greek omega, instead of "s", I had a euro symbol, and so on. And more: all the other apps were suddenly affected too. I opened mousepad, same story.
I restarted X, went to the same site... and had the same experience. But after the third time, things seem to have returned to normality.
Anybody ever experienced something similar? What could this be related to? X going crazy?

Well, viewing the site is not the problem. You'd have to get an account and actually try posting a message on their message board. That's where the havoc begins.
JavaScript from hell, maybe...

Cluster VI Reference Minor Bug

Over on LAVA PJM_labview posted a video of a bug found in LabVIEW 2013 SP1. It is a minor bug with the block diagram when showing a cluster constant with a VI reference constant in it. Here is the video of how to reproduce the bug.
http://screencast.com/t/gfKwlvMcCsHI
And here is the original thread on LAVA.
http://lavag.org/topic/18297-cool-little-lv-2013-sp1-bug/#entry109757
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

I played with this and filed it as a CAR (#479432). Intriguingly, there are a couple workarounds:
Option 1
On block diagram:
1. Create cluster constant containing refnum with auto-sizing set as arranged (vertical or horizontal)
2. Create typedef
3. Unlink from type def
4. Change auto-sizing to desired value
5. Recreate typedef
Option 2
On front panel:
1. Create cluster containing refnum control
2. Create typedef
On block diagram:
3. Create constant from cluster typedef on block diagram.
4. Unlink constant from typedef, change auto-sizing as desired, recreate typedef
Christopher S. | Applications Engineer
Certified LabVIEW Developer
"If in doubt... flat out." - Colin McRae

Minor bug in BindingContext

To whom it may concern,
I found the following minor bug in the BindingContext class: keysIterator() behaves like veluesIterator().
I don't think this affects the framework right now, but here I post it.
Product: JDeveloper 9.0.5.1 (Build 1605)
Class: oracle.adf.model.BindingContext.java
Code affected:
* Returns a thread safe values iterator.
public Iterator valuesIterator()
HashMap copy = (HashMap)mContextMap.clone();
return copy.values().iterator();
* Returns a thread safe keys iterator.
public Iterator keysIterator()
HashMap copy = (HashMap)mContextMap.clone();
return copy.values().iterator(); /* <-- This should be "copy.keySet().iterator();" instead. */
Hope it helps,
Lluís.

Thanks for pointing this out. This will be fixed in the next release.
JR

AC3 audio is VERY low compared to apples menu presets

AC3 audio is VERY low compared to apples menu presets,
The original aiff files are at a good level, concert footage professionally recorded, nothing peaking, nothing too low.
THe AC3 is at minus 10DB on the vu meter, the aiff peaks at 100.
The apple menu music, which are .mov files, peek at plus 1-2.
My old version of compressor did not do this.
I do not have enough room on my disk for all AIFF but I do want to use the Apple Menus and provided music.
Any thoughts?

You can increase the Ac 3 "reference level" to 0 dB (it should be -27 dB)
Reference level? There is no such thing - I believe you are referring to Dialog Normalization, and it is extremely unwise to set this to zero... it is most certainly not a good way of increasing the overall volume of the file. -27 happens to be the application's default value, but it in no way means it should be set to -27. There are a few factors you need to consider when using AC3 encoding...
The DNV setting is the amount of attenuation that the file will get, according to a formula:
attenuation = 31 + DNV setting
Therefore if you set the DNV to be 0 you will alter all AC3 streams by 31 Db, which is enough to make it unplayable without serious distortion:
0 = 31 + (-31)
If you want to get the exact same audio levels out of A.Pack (or Compressor 2, if you are using that) then your DNV setting should be set to -31. This means there is absolutely NO attenuation to the file, meaning you get the same levels out as went in...
What I recommend here is to edit the audio in an application such as Peak and get it sounding exactly as you want it. When you encode to AC3 set the DNV to -31 and set the compression to 'none' (not film standard or anything else, there's nothing worse than badly applied compression). These settings then give you a basic output which is nearer to what you start off with. The other setting much talked about is RF Overmodulation protection. This is useful to turn on if you think the player will be sending the output signal to an RF input on a TV rather than through scart or something else. It certainly used to be the case that such signals were boosted by 11db, causing overmodulation. The setting is a way of preventing that hapening, but as more and more folk have stopped using RF as an input it makes sense to turn it off. If in doubt, turn it on, but listen to the output file and see if it is acceptible.
As for the basic bitrate, for a stereo file, lower it to no less than 192kbps.
Now, if you want to run a few tests, then keep all the settings above and encode the same 10 second piece of audio. Change the DNV to -31, then -20, then -8 and then 0 and play the resulting files back and listen to what happens each time.
Head over to http://www.macprovideo.com and download some of the tutorials there for A.Pack. They have been created by Martin Sitter (who has helped and guided me more than once) and will give you a far better understanding of AC3 encoding than anything else I can think of. You will pay for them, but it is a wise investment if you are at all unsure of how to get the best audio onto your discs. Let's face it, audio accounts for at least 2/3rds of the experience when watching TV - it is as well to get it right.

Lightroom 5.2 behaved suddenly very weird: Ctrl+Z applies some preset, Menu item" About Lightroom ap

Lightroom 5.2 behaved suddenly very weird: Ctrl+Z applies some preset, Menu item" About Lightroom applies another preset, F1 doesnt open help, help also cant be opened via menu.
After restarting lightroom weird effects did disappear.....

Hi
I had the same problem. Only solution was restart.

Minor bug in user interface

I have noticed a minor bug in the user interface... the font color in develop module changes to barely legible whilst editing values using keyboard. Does not seem to affect the font when using sliders to change values.

We've got that one bugged, thanks au2045

[svn] 4513: Minor bug fixes.

Revision: 4513
Author: [email protected]
Date: 2009-01-13 13:46:08 -0800 (Tue, 13 Jan 2009)
Log Message:
Minor bug fixes.
* pausing effect currently sleeping through its startDelay now works
* new effects now work correctly with nonzero repeatDelay
* ASDoc fixes for ANIMATION_REPEAT event
QE Notes: None
Doc Notes: None
Bugs: sdk-17993, sdk-17842, sdk-18672
Reviewer: Jason
Tests: checkintests, Mustella: Effects, gumbo/effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-17993
http://bugs.adobe.com/jira/browse/sdk-17842
http://bugs.adobe.com/jira/browse/sdk-18672
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/FxAnimate.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/events/AnimationEvent.as

It means that small issues in the software were fixed.

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

I think there is a very annoying bug after the latest update of firefox, can I talk to someone, or chat with someone so I can get rid of it

Since the latest auto update of my firefox browser I am experiencing strange issues. Every evening when I stop working, I close my browser (closing all the tabs that I am working on and in the morning, I restore the session) . For many years everything worked just fine ... untill after the last auto update of the firefox browser .. all of a sudden a got 302 errors ( a blank page with the description 302 and I believe "page moved here" or something to that extend ... i try to click the link and get nowhere.
I first noticed it on a few wordpress pages (backend ) that I was working on and which were restored from the previous day ...
thinking it was a server error, since we have several vps and dedicated servers .. i contacted the company who hosts our servers ..
they looked into it and apparently .. there were no issues on the server side and neither on that particular computer ... but our server hosts told us .. that it is probably browser related and seemed to have something to with a bug with the cache of the browser
we didn't know what to do .. it was very annoying .. but at that point it only happened once on a hew pages .. so we decided to see what happened the next time
Next time we did not restore a session with wordpress pages .. but with the google search engine open and on a few other tabs logged into social media .... and as was saidn by our server hosts it was indeed not related to work that we did on pages on our servers ... since that time even the google search engine homepage ... showed us ... moved here
Can you pease look into it and fix this .. we are doing the same thing as many years on the same computer also a few years .. so it is not anything we do wrong either .. it is most definitely browser related
so can you please fix it asap .. since when we work on wordpress .. that is not the only thing that goes wrong .. we also have difficulty uploading updates ... when updating sometimes after the update of any particular change on a wordpress page is done ... we are also redirected to a blank page .. so the updated page does not want to load ... in that case we have use our back button ...
which sends us back to the right page ... but with the old data on it ... then we have to refresh that page .. and only then we see the page updated ... so it seems that there is an issue in both direction with the caching of the browser after the last update
Kind regards,
Robert

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

Very Minor Bug 1.4.1 Presets & Sync

Similar Messages

Maybe you are looking for