Very newbie question: SNASW on Catalyst

Hi to all,
I've got a very basic question on snasw.
Can SNASW be implemented on a Catalyst 6500 in any way, for example using a particular model of supervisor engine?
Thanks.

Hi Marco,
No, the SNASw feature is not available on any version of the Catalyst 6500. The reasoning is that SNASw is heavily process bound, the Catalyst 6500 is optimized for IP packet forwarding, and combining the two is too great a compromise. We suggest using a one armed router attached to the Catalyst 6500, so that the SNA processing is not in the direct path of the IP packet forwarding.
Rgds, Dan

Similar Messages

Please sorry this very newbie question.

Hello people
Again, please sorry this question I'm very new in this Emerging Technologie.
I Wish to know the difference between Fiber Channel and Fiber.
I assume please do not laught, That a Bundle of Fiber ports conform a Fiber Channel am I Right ?
Can anyone point me a good web site where I can find this difference
Thanks for you Help
Victor.

Fibre Channel is a technology/protocol for networking Storage. See http://www.t11.org/index.html for all the standards. Fibre is either Multi Mode(orange) Or Single(yellow) and is the actual fiber Optic cable used in Storage area Networks to connect switches, storage and Host systems together.

Very newbie question.

I am taking a AE class and have a question for a project. I want to take some text and make it look like it is flowing into the distance up toward the top of the screen. Imagine someting like in Guitar Hero, and I am having problems making the string of text taper. It would be easy in Photoshop, just use transform and warp, however I haven't found anthing like that in AE.
Am I missing something?
I appreciate any help,
Joseph

You can make the layer 3D and rotate it around the x axis. See "3D layers overview and resources". Or you could distort the layer with something like the Corner Pin effect or one of the other Distort effects.
Also, if you're new to After Effects, please start by going through the resources on this page: "Getting started with After Effects".

[SOLVED] cool'n'quiet & modprobe newbie question

This is probably very newbie question, but I have no idea what to do.
I want to have cool'n'quiet working on my amd64. I turned it on in bios, and downloaded powernowd.
When I type:
> modprobe powernow-k8
> powernowd
it works. I added powernowd to demons in my /etc/rc.conf but after restarting computer it doesn't work - I have to type both commands above again.
How to make my system not forget loaded module after restart?
Last edited by senjin (2007-08-24 19:49:31)

Use either /etc/modprobe.conf or the MODULES= array in /etc/rc.conf. I would have thought powersaved provided a config file from where you could pick a module to load though... sure there isn't one in /etc/ ?
Personally i would opt for powersaved, since i think it's more full featured (it's more a _power_ than a _cpu_ manager), but then again you may not care for anything other than controlling the cpu stepping/speed.

Newbie question - XML version, searching by artist

Probably quite a common problems - apologies for newbie questions.
I've changed the URL of my MP3s in my XML to a new location and refreshed my feed. Is there a way of seeing what version of the XML iTunes is using? (it takes around 24 housr to refresh, right?)
Also, when I'm searching for my podcast by author it's not coming up (<channel><itunes:author>) - is there a reason for this or a way to get it to show up when people search for the artist, other than doubling it in the title? (This works by the way, but I'd prefer not to!)
Thanks.

you can do it in just one loop, going through all the image
tags in index_content and for each tag fill the values of all four
arrays
for (i...) {
get the appropriate child of index_content
first_array[ i ] = value of first tag
second_array[ i ] = value of second tag
no need for multiple loops.
flash has functionality for xml files, but it helps to write
a little wrapper around it, to simplify programming, especially if
you work with xml a lot.. I wrote my for work, so I can't show it
to you, but it's not very complicated to do

Apex Newbie question !!!!! HTTP server ????

I am newbie at APEX. I have a DBA background, but no experience with Oracle applications.
I DO respect your time, and have tried to find this info on teh docs, but, honestly, can not find it. And I looked over everywhere, metalink, otn, gogling. I thought that I would find it on these forums under some form of FAQs, but have not found the answer :-(
I have installed oracle database 11g for windows on my laptop, and when installing APEX 3.2, it asks me to stop the http server and ..... :-)
Now, I have a question regarding the Oracle HTTP server, which is supposed to be isntalled with the 11g, instead of the Companion CD, which no longers exist.
First question. We have a http server that is used by oracle EM database control, correct ? I do not see a service for it on the Services list. Teh apex application install asks for stopping/starting the http server. How do we do that ? AND, where the the http server binaries located ? I did a search for apache, and found it under C:\app\oracle\product\11.1.0\db_1\perl\site\5.8.3\lib\Apache, but no binaries there, or under ORACLE_BASE\bin either.
What do I setup for ORACLE_HTTPSERVER windows environment on a brand new 11g database install ?
Now, I see that we can get HTTP server from BEA install. I was trying to keep APEX from using a web server tier here. To me, the beauty of APEX is to not have to manage BEA, or any other tier. Keep it simple, at least for development, and keep everything on the DB, and simply use the native HTTP server.
So, this is a VERY basic question, but how do I do that ? I will worry about what I can and can not do with the native HTTP server or BEA later. I just want to get this up and running so that I can start playing with it.
Thanks,
Henrique

Here is my latest update before I go to bed :-(
I was able to install the HTTP server, but had some issues later down on the apex install.
C:\app\oracle\product\10g-iAS-http-server\opmn\bin>opmnctl status
Processes in Instance: IAS-1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
HTTP_Server | HTTP_Server | 5204 | Alive
I am able to see the welcome page for the web server here
http://localhost:7777/
I am able to reset the admin password, ( by the way, I did setup the gateway as well :-) ). I am not sure what happens when you have both the gateway and the web server setup. Now, when try to login to the apex admin account using either
http://localhost:7777/apex/apex_admin or
http://localhost:7777/pls/apex/apex_admin, nothing happens besides a HTTP-404 error.
Now, when I had the port set to 8080, via the commands
SQL> EXEC DBMS_XDB.SETHTTPPORT(8080);
PL/SQL procedure successfully completed.
SQL> SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
GETHTTPPORT
8080
and try to login again here
http://localhost:7777/pls/apex/apex_admin
I do get a prompt, but when i enter admin, and the password I have setup, it does not allow me to get in :-(
Now, I need some explanation of this DAD file, as I am not sure if I need it to simply login during install. Here is the man page from the install doc :
3.4.11.1 Creating a Workspace Manually
To create an Oracle Application Express workspace manually:
Log in to Oracle Application Express Administration Services. Oracle Application Express Administration Services is a separate application for managing an entire Oracle Application Express instance. You log in using the ADMIN account and password created or reset during the installation process.
In a Web browser, navigate to the Oracle Application Express Administration Services application.
If your setup uses Apache and mod_plsql, go to:
http://hostname:port/pls/apex/apex_admin
Where:
hostname is the name of the system where Oracle HTTP Server is installed.
port is the port number assigned to Oracle HTTP Server. In a default installation, this number is 7777.
pls is the indicator to use the mod_plsql cartridge.
***apex is the database access descriptor (DAD) defined in the mod_plsql configuration file.***
Here it mentions this DAD file, and I am not sure if I need it now, and even, how to reference it. My database name is called apex, but I do not have anything on my dads.conf file. Should I have something there ? I see a sample such as this from the README.DADs file :
<Location /plsqlapp>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername scott
PlsqlDatabasePassword tiger
PlsqlDatabaseConnectString orcl
PlsqlAuthenticationMode Basic
PlsqlDefaultPage scott.home
PlsqlDocumentTablename scott.wwdoc_document
PlsqlDocumentPath docs
PlsqlDocumentProcedure scott.wwdoc_process.process_download
</Location>
It is a bit late tonite. Tomorrow I will get back at it.
Thanks for any help, but I must be doing something really obvious to you guys here, and I can't see it :-(
Cheers,
Henrique

Unix version of Netweaver Dev Studio, Newbie question

Hi,
I have a very silly newbie question. Is there a unix version of netweaver developer studio and if so what is the path to the executable?
Thanks in advance
John

I don't think so. NWDS is built on top of Eclipse which is an open source project by IBM. Check out there site.
http://www.eclipse.org/
As of right now, I don't believe that SAP is offering a Unix version and I doubt that they will.
Regards,
Rich Heilman

Newbie question - cloning to a new server

Hi all,
I am very new to the EBS world, so please forgive the "newbie" question. We are running 12.0.4, and we have approximately 12 different environments. We probably do 3 to 4 clones a week, generally from production to one of the existing environments.
However, we now have a couple brand new Linux servers, and we want to set them up as a new environment to clone to (one will be apps server, one will be DB server). I am looking at some of the Metalink documents on how to do this. But my basic question is this - do I first have to do a basic EBS installation onto these servers, before I will be able to clone an environment over to them?
Thanks!!

Duplicate thread ...
Newbie question - cloning to a new server
Re: Newbie question - cloning to a new server

MEGA-Newbie Question

This has to be the most newbie of all newbie questions. Interestingly enough, it is the one that is most rarely answered in a non-technical way that the novice can understand.
What exactly do I need Motion for? What, in common-sense, regular-language terms, does it do?
My manuals tell me how to do all the things it does. But they assume I am an experienced editor (I'm an experienced filmmaker, but only just started working in editing) who already knows all the things that CAN be done and only wants to know HOW to do them in Motion. This is not me.
So, say I am making a 90-minute HDV feature music doc. I have footage, I have stills. I will need captions, titles and text on screen. I will need an end credit roll. What is it I will probably want Motion to do for me that FCP can't do on its own?
I'd appreciate an answer in somewhat non-technical language that addresses the practical use -- from a filmmaker's point of view -- of this no doubt amazing program.
Thank you.

hi Paul,
You are right you can do much of the things Motion does in FCP, but Motion takes them further and often makes them easier to do.
Briefly whereas FCP is generally for editing moving pictures from rushes to a coherent whole, Motion is used to composite or layers of moving pictures to make a new coherent whole picture.
So i plain words, you can meld different sources of video, stills text and other sources together to make a new end peice. You can animate text, warp pictures, create fires, smoke, hide bits ( masking), animate graphical elements. In short whenever you need to layer up multiple sources of imagery Motion is your man. Sure FCP can handle a lot of this, but Motion is designed specifically and only to do this, and does it very well. ( You would not want to edit in Motion!)
In your 90 minute example you could do it all in FCP and make it look very nice. But you might need to go the extra mile with the title sequence, perhaps the captions will have some kind of generic strap line ( lower third) under All these things could be done easier and better in motion. However you would not want to import the whole 90 minute programme into Motion and start throwing captions on it. Rather you would want to build each element ( strap line, animating titles, opening sequence etc) in Motion and then import them into FCP for the final mastering. Motion is for short sequences, and FCP is used to collect them all into one programme.
I make music commercials for a living, do all the cutting on FCP and build all the graphic elements in Motion, take a look at my site for some examples if you'd like,
http://www.moojoose.co.uk
Hope this helps you
regards
adam

Starting fluxbox-newbie question

:? I currently have kde running on my system. I installed fluxbox using pacman.
How do I start fluxbox? I couldn't even find it, so I su to root, type fluxbox, and get
an error message saying that another window system is already running! (kde)
A typical newbie question, but I don't know how to start fluxbox. I think I want to
replace kde with fluxbox, so should I just uninstall kde??
Thanks -- Larry

lmellen wrote:
:? scottro -- This is .xinitrc.
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec wmaker
# exec startkde
# exec icewm
# exec blackbox
exec fluxbox
The only thing I uncommented was" exec fluxbox". I'm still getting kde at start up.
I have kdm listed in a start up daemon in rc.conf. is this the problem?
thanks for the reply -- Larry
if you comment out exec wmaker and then put a ! in front of the kdm daemon you should boot to a console at which point you login then type startx. you may also have to change your init level but i dunno i haven't used a graphical login manager for a very long time.

Newbie question. coldFusion w/ Flex 2 tutorial

Hello.
I am very new to F2 and CF. Fairly proficient at Flash, DW,
css, html, etc. I have purchased and worked through a couple really
great F2 and CF books. I am able to construct some good basic stuff
with either. But am not really finding a tutorial or book that is
exclusively committed just to the subject of to using CF with Flex
2. There always seems to be a just a cursory mention, or a
brush-by, but not much more than that. I get it: if you got this
far, you probably arlready know everything about the two and
shouldn't need such.
If you could point me to a couple good references, I'd be
very appreciative. I'm looking for a good step-by-step, just on
this subject.

Thank you. You are right on with the direction of your
answer.
Immediately, I am just trying to create a simple method of
add/edit/delete records to tables from forms that I could access
remotely with Flex 2. I just assumed that CF would be the best
method, both being Macradobe products. If I am wrong about that, so
be it. Utlimately, I would like to print specific "quotes" relative
to specific customers and products to .pdf. This is for my own
personal use (as an insurance broker). Not commercial. Nor is
anyone paying me to develop this.
Maybe a better newbie question would be: what would be the
preferred method to add/edit/delete records, remotely, from a Flex
2 application for later printing to .pdf based on various selection
criteria? I have figured out how to do this on my own stand-alone
machine. Now I want to be able to do it remotely from anywhere.
I'm
not looking for instruction from anyone here, just direction
to your favorite learning tools so that I can dig in and learn.
I bought the books you recommended (adding to my own Library
of Congress).
Thanks again!

Buy License for single edition....newbie question

Hi, very new to this forum and DPS. I tried to click the "Buy licence for single edition" link on the left of the page, but was not provided with any cost information - only an adobe product notification page. I am a Adober CS5.5 Design Premium subscriber. Keen to know costings before I learn how to do all this. Cheers

it depends on the adobe store website and may be a legal issue too, because
you don't buy software but a licence here (in fact, sth. like a serial
number)
(mobil gesendet)
Am 15.10.2011 09:07 schrieb "JeroenVink" <[email protected]>:
Re: Buy License for single edition....newbie question created by
JeroenVink <http://forums.adobe.com/people/JeroenVink> in *Digital
Publishing Suite* - View the full discussion<http://forums.adobe.com/message/3972473#3972473>

Total Newbie Question ... Sorry :-(

I know it's a windows thing, and I am now converted to Mac but I gotta know this because it's doing my head in. It's a complete stupid green gilled newbie question.
When installing new programs on a Mac can you create shortcuts to the programs on the Dock? I did what I THOUGHT it would be, i.e I made an Alias and stuck it in the dock, but on rebooting my Mac later on, in place of the shortcuts where 3 question marks which when clicked on did absolutely nothing???
Help?
A.L.I
Windows XP Pro Desktop, Macbook Pro, 60GB iPod Video Mac OS X (10.4.5) OS X

You aren't installing something from a dmg file are you? The dmg is a disk image – kind of a virtual CD. So when you double click the dmg and then get the little disk/hardrive/custom icon on your desktop that is the same as if you had mounted a CD. You then need to drag the application off of that "CD" into your application folder. Then it is truly installed.
You can then "eject" the icon your your desktop. This is what happens when you shutdown and without remounting the image your dock shortcut can't find the original.
Just a thought.

If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question

If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question. Trying to hold out as long as I can, but purchasing an iPhone for Christmas and new iMac next year when warrently expires.

Thank U very much for the quick reply, I wanted to upgrade this weekend, but still on the fence. I can live with the software that is not compatible, they are on another compuetr, just didn't want the obvious stuff to stop working.

Newbie Question. just installed IE7.. how do I set up a local host to preview sites?

Sorry for the newbie question... but it's been a long time since I have done this
Thanks!

Just define your site in DW as always. For a static site, that's all you need to do.

Very newbie question: SNASW on Catalyst

Similar Messages

Maybe you are looking for