Very odd question...
My mother had received a message on her answering machine from our local police department yesterday saying that they needed her to call them, that it wasn't important, but that they needed to speak with her. Today, she called back, and the officer that had called wasn't there, but they told her to stop up and they'll see if they can figure out why he called. In the interim, the officer actually called back again, and my mother's sneaky, amoral boyfriend intercepted the call. Apparently he wanted to know if anyone here had an iPhone that they were using, because there was a stolen one pinging on our property. He said that (and this is secondhand info being passed to me) the phone had been "reactivated". He began acting very uncharacteristic when he answered the phone (he's incredibly lazy and selfish, so he never answers the land line, so that in and of itself is very strange), and afterward. My question is: is there any way to see iphones around you without having their info? I just want to see if there is something on the property, because if he's behind it, chances are there's more to it than just a stolen phone. Unfortunately, I feel like this is all moot anyway, because if the officer told him the circumstances, if he had a phone in his possession, it's probably gone by now.
Can anything be done?
Move the fan, maybe?
I presume this is a CRT monitor, not a flat panel. If so, the fan motor's magnetic field is undoubtedly affecting the monitor.
Message was edited by: eww
Similar Messages
-
A very odd question about accessing cube via HTTP PUMP
hi there:
Everything was fine a couple of days ago when I used excel to connect to cube. Today, when I use excel -> from Other sources, I can select the AS database but can not see the cube at all... The odd thing is that if I choose to use Existing Connections
which contains the connection to the CUBE before, after put my user id and password, I am able to connect and navigate cube data.
There is a role for the AS database and myself has been granted as Full control ( administrator). I've also switched to SSMS and access cube over there directly, no issues at all.
Question: why excel is not allowing me to see the list of cubes for an AS database???
Thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hello,
How have you setup permissions for the HTPP access. If e.g. IIS and SSAS running on different machines, the permissions settings are a little bit difficult. So may a different user is used and that one may don't have permissions to access the cube.
See Configure HTTP Access to Analysis Services on Internet Information Services (IIS) 7.0 => Step 3: Configure IIS authentication and add the extension + Step 5: Grant data access
permissions
Olaf Helper
[ Blog] [ Xing] [ MVP] -
This particular thread is very odd:
<http://forums.adobe.com/message/4939449#4939449>
A question is posted on: 21-Dec-2012 11:21
Two answers were posted on 21st July 2012. One by Photodrawken and another by 99 Jon {Notice the date of the answers here}
A correct answer was posted on 21st December 2012 by a staff member. {Again notice the date of the answer here}
The odd thing is how can a question posted just today receive answers on 21st July? {Some 5 months earlier}
This is what you get when Staff members and some MVPs (who shall remain nameless) meddle with the threads. Complete and utter chaos!!!!The relevant pictures are all here:
-
I've encountered a very odd problem with a computer at work. It's a G4 733 mhz, running os 9.1.0, and at my insistence, my boss has agreed to let me install os X, but only on an external drive. Right now this thing has all kinds of weird going on. First off, it never remembers the startup disk, it always starts up with a question mark for a minute before finding the internal os 9.1 disk. (This is an old problem, not a result of my attempt to install os x.) It starts up off the tiger disk fine, but it won't recognize the firewire disk as the start up disk. (In OS 9's startup disk control panel it will see the the folder, and it lets you select it, but it always reverts to the internal drive with OS 9 on restart. Same thing when selecting it with the startup disk options from the OS X Install Disk.) To make things weirder, holding down option on startup lets me see the CD System folder, and the OS 9 System folder, but not the firewire drive. I hooked the same drive up to my laptop, and booted up off the drive fine. I tried giving the PRAM a zap just for fun , and then it didn't see anything till I started up off the CD and told it to startup in OS 9. My mind is boggled, anyone have any idea what this is a symptem of?
Hi, Geoff -
OS 9.1 can be used as Classic with OSX, although OS 9.2.x provides better compatibility in that mode.
However, the original OS 9.1 installs (whether from a CD or the result of a download update) have an issue - the version of Startup Disk control panel that comes with OS 9.1 and earlier can not recognize OSX as a viable Boot OS, hence will not make it available for selection. The solution for that is to update the OS to 9.2.x, or at least update just that control panel. There is a specific download available for just the control panel -
Startup Disk 9.2.1 Document and Software
There may be another problem. You stated -
I hooked the same drive up to my laptop, and booted up off the drive fine.
That would indicate that the install of the OS on the firewire drive may have been done when it was connected to the laptop. If that was the case, it may not be suitable to boot a different model, such as your G4/733.
Most OS installs are specific to the hardware of the machine whose boot OS is running the installer. There is a way to do a universal (boot any Mac) install of OS 9.x, but I don't know if there is a way to do that with OSX.
To make things weirder, holding down option on startup lets me see the CD System folder, and the OS 9 System folder, but not the firewire drive.
Booting up using Startup Manager (which is what appears when you hold down the Option key during boot) will display only those OS's valid for that particular machine, and only one OS per volume (volume = an unpartitioned drive or disk, or the partition of a partitioned drive or disk).
Sometimes Startup Manager does not 'see' all bootable volumes immediately; clicking the Rescan button (the round arrow) will make it recheck all buses for a bootable volume.
First off, it never remembers the startup disk, it always starts up with a question mark for a minute before finding the internal os 9.1 disk.
This could be indicative of a weak or dead internal battery. Since your G4/733 is running a version of OS 9.1 it must be a Digital Audio model (the G4/733 QuickSilver models originally came with OS 9.2, and can not use any version of OS 9.1); this means it is about 5 years old now, which is about all that can be expected from an internal battery even if the Mac is left connected to live power when it is shut down.
When the battery is too weak or dead the Mac will not remember PRAM settings between boots or restarts, and may have difficulty booting to some drives (particularly to external ones).
Suggest you replace that battery - you can get one at places like Radio Shack for about US$15, cheaper on-line. -
Very odd ownership on FW drive: possibly iTunes-related
A FW drive I have attached to my AL iMac is behaving very oddly in 10.4.11: it's Info window shows ownership/permissions as it would be displayed in Leopard (I have admin access.) I "You can read and write" followed by a list with 'group' mini-icons on the left. The only item in this list is "admin' with the privilege "Read attribute…ete contents", and I can't edit anything.
Most folders and items inside the drive reveal normal 10.4 ownership/permissions info, except for my iTunes folder, which displays as described above.
Any ideas????? This is new to me.BD: I have an off-topic question for you: is there a way to reach you?
John, only via PM or email from my BBS... http://x704.net/bbs
I'd look for Leopard stuff on the drive, When I did it with Leo, some Chipsetted FW drives were marked Read Only, others as unmountable... real mess getting them straightened out in Tiger.. I think it took DiskWarrior more than one pass at the Files tab to return it to Tiger use.
Not sure whether iTunes on there would do it, but with today's DRM, I consider it a possibility that it may wish to have complete control of it. -
When I open Firefox my yahoo home page comes up very odd and not usable. If I log into my e-mail it also comes up odd and not usable. (the tools across the top like delete etc don't show up.) If I go to a different browser and pull up yahoo it is fine, if I log on to my mail there it also comes up fine and usable. Please help am new to Firefox and just barley getting to where I can us it really don't want to have to change to yet another browser. Losing all my stuff again. (Microsoft browser program stopped working) Please help, real desperate here. Thank you. Followed the instruction on how to take a screen shot, did so, but don't know how to attach it here. Didn't see instructions regarding that and beyond my limited abilities. Have it if someone needs it and can tell me how to attach or send.
If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Very Odd WiFi connection problems - plus crashes
Since Firefox 2.0.0.9 crashed yesterday, I have had very odd problems with my WiFi (Earthlink through an Apple Airport). Network Diagnostics says everything is okay, but Safari can no longer connect to the internet, and after Firefox crashes I can not even send Apple an error report. Yet I can get online with Firefox, as I am now.
The problem apparently started EITHER when I upgraded to the latest Firefox or when I tried to place an order at <http://www.senacases.com/> (or both). After Firefox crashed multiple times while trying to place an order at <http://www.senacases.com/>, I opened Safari, which would not connect.
I ran Network Diagnostics which said everything is fine. But Firefox continually crashes trying to place an order at <http://www.senacases.com/>, Safari continues not connecting, Network Diagnostics continues to say everything is fine, and now I can't file an Apple Error Report and trying to connect to some of the library services at Notre Dame (something I have always been able to do before), makes Firefox crash.
The only other possible symptom I have noticed is that I could not connect to a Late Show video this morning. Otherwise, I can browse the web in Firefox, I can pick up my email with Entourage, etc.
How do I fix this?PS: I once had a similar problem that was fixed by a simple restart.
I have restarted numerous times now, with no change. My MacBook was off over night. -
Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help? -
If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question. Trying to hold out as long as I can, but purchasing an iPhone for Christmas and new iMac next year when warrently expires.
Thank U very much for the quick reply, I wanted to upgrade this weekend, but still on the fence. I can live with the software that is not compatible, they are on another compuetr, just didn't want the obvious stuff to stop working.
-
Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.
Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian. -
Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneralHere's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand. -
VERY SIMPLE QUESTION REGARDING UML DIAGRAMS IN JDEVELOPER
Hello there,
I have a very simple question. I want to know how I can convert a class diagram that I have created in jdeveloper into a jpg image so I can put in word. When I try exporting it only has the uml to xmi option
Does anyone have a suggestion?Hi,
Right mouse click on the class diagram,
than click publish diagram on the context menu
and save as jpg where ever you want...
Boris -
A very very very simple question
Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga -
A very simple question..Very Urgent
HI,
I have a very simple question.I am able to set up the client authentication as well as server authentication. Now do i need to authenticate (both server as well as client auth.) for every request i send to the server on https...i think it should be like that it should authenticate only for the first time and for the next upcoming requests in same session should not require any server or client authentication.. i think as it happens in browsers..
what is the fact actually??..can somebody put some light...right now in my case it is authenticating for every requests..
This is what i have done..
/****constructor part********/
// and tm are arrays of keymanagers and trustmanagers for client keystore and truststore
sslContext.init(km, tm, null);
HttpsURLConnection.setDefaultSSLSocketFactory(ssf);
HttpsURLConnection.setDefaultHostnameVerifier(new MYHostNameVerifier());
/****Method to send the request and response*********/
urlConn = (HttpsURLConnection)url.openConnection();
urlConn.setDoInput(true);
urlConn.setDoOutput(true);
OutputStream os = urlConn.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
oos.writeObject(someobject);
oos.flush();
InputStream is1 = urlConn.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is1);
SomeObject retObj = null;
retObj = (SomeObject)ois.readObject();
ois.close();
System.out.println("Get String>>>>> "+retObj.getString());
I am creating the object of this class..and calling the method again and again for sending requests and response..so i think handshake everytime i call the method...what i want is that handshake should happen for the first time and for the next requests no handshake or certificates should be checked or processed..
is it possible ..how..what i need to do for that..
please help me in this..
Akhil NagpalHi,
how could I achieve SSL Session Resumption using HttpsURLConnection.
Thanks. -
This is a very simple question,but I don't know.Please me.Thank you!
I am a Chinese student in a university.I have a very simple question to ask.
I have writed a EJB module,and I have deployed to Weblogic8.1 successfully.
1.Now I want to write a client program.Is it necessary that the client program is packaged in the EJB package.For example ,the EJB package is Beans,is "package Beans " or "import Beans.*" necessary in my client program.
2.If I only know the EJB interfaces,that means the EJB module is writed by other programer.I want to know how I can write the client program.How can I call EJB module's method writed by other programer.Could you give me a simple example?
Thank you very much.I have writed a EJB module,and I have deployed to
Weblogic8.1 successfully.:-)
1.Now I want to write a client program.Is it
necessary that the client program is packaged in the
EJB package.For example ,the EJB package is Beans,is
"package Beans " or "import Beans.*" necessary in my
client program.You need not package your client with the EJB. It can be a JSP/servlet or a stand-alone application.
2.If I only know the EJB interfaces,that means the
EJB module is writed by other programer.I want to
know how I can write the client program.How can I
call EJB module's method writed by other
programer.Could you give me a simple example?
import java.util.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
import examples.*;
class TestEJBHello {
public static void main(String[] args) {
Context context = null;
Object object = null;
// Hashtable for environment properties.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
env.put(Context.PROVIDER_URL, "t3://localhost:7001");
HelloHome home = null;
HelloWorld hello = null;
try {
context = new InitialContext(env);
object = context.lookup("HelloWorldTest");
System.out.println(" JNDI Looked up >>> " +object);
home = (HelloHome)PortableRemoteObject.narrow(object, HelloHome.class);
hello = home.create();
System.out.println(hello.hello());
} catch(Exception e) {
e.printStackTrace();
} finally {
close(context); // Closes the initial context.
private static void close(Context context) {
try {
context.close();
System.out.println("*** Context closed. ***");
} catch (NamingException namingException) {
namingException.printStackTrace();
} catch(Exception exception) {
exception.printStackTrace();
}Here's a sample client app code I use for a HelloWorld EJB. You need to have a EJB client JAR containing the home and remote interfaces in the classpath during compile time and runtime.
x
Maybe you are looking for
-
Using a wiki group calendar in ical
Dear all, I have searched the forum now for quite some hours but I haven't found any sollution. I am running a Lion Server 10.7.2. I have setup iCal server and a wiki. I am trying to set up a group calendar, which is working, BUT I am having trouble
-
ITunes 10.6.3 download location?
Does anyone know where to dl iTunes 10.6.3. on the dev portal the download links to the apple.com/itunes site. No iTunes 10.6.3 there, just 10.6.1...
-
Hi, I have these doubts in MM and FI integration a) the relation between valuation class, movement type and transaction key in automatic postings of MM in FI b) What are CNS and valuation string, Accout modif in tcode OMWN and how these are related t
-
How do i install cc photoshop touch onto my tablet
i just purchased a surface rt and i want to install cc photoshop touch onto it (i already own creative cloud) and when i sign in to creative cloud and try to download PS for andriod it just brings me to the store to purchase photoshop touch even thou
-
My 3gs is turning itself on and off constantly how do i stop it?
??