Very Poor Quality after Importing from Time Machine

I lost iMovies for some reason when I upgraded to Maverick.  I imported my iMovie events from Time Machine into iMovie 10 but the quality is now horrible. Anyone know how to correct this?  DO I have to import a differnet way?
Gratefully yours, Daniel

I'm not quite clear exactly how you imported - if your events were from iMovie 9 the correct procdure would be first to recover your iMovie Events and iMovie Projects folder from Time Machine.
You would then check that they open OK in iMovie 9 (which you should still have available in your Applications folder). 
When this OK you can close iMovie 9, open iMovie 10 and update your media into iMovie 10.
See help at: http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
If you have already done this,  have you allowed time for iMovie 10 to re-render your clips in the background?  (can take a long time).  The quality immediately after importing may well be poor at first.
Geoff.

Similar Messages

  • How can I fix repetitive 'fontd' crashes after recovery from time machine backup?

    After recovery from time machine backup (Disk Utility told me to reformat my internal hard drive) i got annoying repetitive prompts from crashing 'fontd'. How can I fix it? Anyone suffering from the same disease?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
    Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

  • Importing from time machine

    I'm trying to add photos from time machine to my iphoto. I imported  the library to a new folder to avoide having 2 iPhoto libraries with same name.
    when clicking on the iPhoto library I get this:
    "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete."
    I'm afaraid it will deliete my corrent library... I wish there will be a way to import spesific photos and not all the library... I don't know what to do.
    Any help?
    thanks
    dorit

    It won't delete your current Library.
    Regards
    TD

  • Super drive is not working after Restoring from Time Machine

    well its pretty much the Subject actually, my imac giving me BlueScreen problem so i searched and posted question and the only Solution i got was to Re-install Leopard and i did that by using Leopard DVD and Restored my imac from Time Machine backup, But i got into new problem and now the TIME after restoring from the "Time Machine" my DVD ejecting EVERY CD,DVD etc. even the Leopard DVD which he reads happily.
    I dont think its a hardware fault at all, but i'm not a "Genious". Any suggestion!

    Issue solved with visit to Genius Bar.
    As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
    If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
    Hope this helps someone else.

  • Mail.app 4.1 does not work with 10.6.1 after restore from time machine

    After I restored my complete system from time machine backup using the original snow leopard install disc. My Mail.app won't start up anymore. It shows me the message:
    "You can't use this version of Mail with this version of Mac OS X"
    "You have Mail version 4.1 (1076/1075.2). It can't be used Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button"
    I don't understand the error message as mail 4.1 was installed as part of Mac OS X 10.6.1?
    Detailed event log:
    2009-11-03 06:00 AM: Backup succeeded successfully via time machine on my time capsule
    2009-11-03 11:00 AM: Original laptop was broken. (Screen didn't work anymore)
    2009-11-03 03:00 PM: Got a temporary new Macbook Pro from my System Administrator.
    2009-11-03 09:00 PM: Successfully restored complete system on new temporary macbook using time machine with data of my time capsule. Everything looked the same (login image, installed applications, etc...). But when I tried to start Mail.app it gave me the above message.
    Can someone help me with this???
    Kind Regards,
    Niels

    I've seen two possible solutions to this:
    1. Easier, but less likely to work - try to start mail from the Finder, rather than the Dock. If it works, replace the Dock Mail with the Finder one.
    2. More probably the solution: download and reinstall the 10.6.1 combo update. I know you shouldn't need to after a TM restore but ...

  • I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

    Hi all,
    My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
    I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
    Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
    I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
    Thanks.

    Hroodbwai wrote:
    I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
    Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
    From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
    Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
    |
    |
    I'd been logging out and backing up manually on a regular basis.
    Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
    The only time it's backed-up is when you actually log out.
    You should have seen this window on logout:
    |
    |
    followed by this one:
    |
    |
    If you didn't see the second one, or cancelled it, the account wasn't backed-up.

  • Can't log in after recovery from time machine

    We had to replace the disk on my daughter's MacBook Pro. We restored her data from Time Machine on an external drive. After completion the system brought up the login screen. In addition to her account, there's one for me and one for my wife. All of them appeared but none of our passwords work. The password hints are correct, but we can't log in. Help!

    First, make sure caps lock is not on.
    Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive.
    Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • After restoring from Time Machine to new Hard drive, system will not boot

    I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

    Same exact problem here just yesterday, folks.
    Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
    I only managed to transfer my old disk content by using CarbonCopyCloner.
    Having said that, your solution looks uselful, Portland Mac! :
    Portland Mac wrote:
    ... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
    But I would not say the following:
    Portland Mac wrote:
    ... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
    Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
    In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
    And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
    For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

  • After restore from Time Machine Software Upgrade is not working.....

    After I restored my complete system from Time Machine, some parts of it is not working and announcing problem to start, e.g. Software Update, My Day from Office 2008....what should I do?

    Hi, and welcome to the forums.
    First, are you running Leopard or Snow Leopard? Your settings at the bottom of your post say Snow Leopard, but this is the +Leopard > Time Machine+ forum, so I'm not sure which is right.
    Did you do the full system restore, starting by booting from your OSX disc? If not, what exactly did you do?
    Exactly what is wrong with Software Update? What happens, or doesn't happen?

  • After restore from Time Machine

    After I restore my system from time machine, it tells me to restart the computer, and so I do, then it continues to ask me to do so and thats all I get unless I press the option key, then I can only use the installation disk. What is the problem?

    Hi, and welcome to the forums.
    There are a few possibilities. You've posted in the Leopard Time Machine forum, but your signature says you're running Snow Leopard. If you used a Leopard Install disc to restore a +*Snow Leopard+* backup, that's the problem. Try again with a Snow Leopard Install disc (you can use either disc to restore a Leopard backup).
    If not, why did you restore? If you were having, say, internal HD troubles, it's possible that they corrupted your installation of OSX, those changes were backed-up by Time Machine, and restored. If that's a possibility, try the restore from an earlier backup.
    If nothing seems to work, do an +*Erase and Install+* of Leopard, if that's what you're running; or start up from your SL Install disc, select +Disk Utility+ from the +Utilities Menu,+ erase your internal HD, quit Disk Utility and install OSX.
    When your Mac restarts with only a fresh copy of OSX, +Setup Assistant+ will ask if you want to transfer your data from another Mac or Time Machine backups. Do so -- see #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum), for details.

  • Problem after migration from time machine

    I recently changed the hard disk in my macbook to a bigger one,
    and then used migration assistant and my time machine backup to restore the system.
    Everything seems to work just fine except aperture.
    about 90% of my projects do not show any thumbnails, just outlined gray boxes with a file name
    when I click on them I get to see the photo in question but when I click "show master" aperture says "master image offline" (and does not show the photo anymore)
    my Library is referenced and the masters are located on the computers hard disk itself (not on an external one) and they are all there !
    (i.e. they were perfectly transfered from time machine)
    when I first opened aperture after the migration I got a message that the library was corrupted, I clicked repair and this produced a recovered folder
    with a recovered project which as far as I can see is empty ?
    I tried the 3 trouble shooting tools (repair permissions, repair database and rebuild database) none of which changed anything
    I was going to try to restore the library file from time machine but now time machine says that I do not have permission to acces the pictures folder !?
    (at least not on any backup older than the last one, which was done after the system was migrated)
    I am starting to get stuck here, I found several references online to the same problem but no real solution.
    Any ideas?

    OK, so I did a clean install of snow leopard from the installation DVD and then used setup assistant to restore from time machine.
    Since time machine had already made backups after I migrated for the first time it basically restored the system
    to its previous state (with aperture not working properly), it did however restore the admin account which I had already deleted.
    This allowed me to access my older time machine backups.
    When I tried to restore the aperture library file (after first deleting the current one and emptying the trash)
    I got a window saying copying 0kb from 10,68GB that just hung there
    after checking my user account I found an aperture library file of about 6GB, I deleted this and did the restore again and let the window saying copying 0kb of 10,68GB run for half an hour, I then found an aperture library file in my account of 11GB. I opened aperture and guess what? exactly the same as before! no thumbnails and no access to masters except for about 10 projects (in fact every time I try this aperture makes previews for exactly 608 photos !?
    I might try to copy the libary file from the old hard disk if I find something to mount it, but I am starting tho think that i will just have to reimport the entire library, and forget about the versions and be thankfull that I at least saved the masters :-(

  • Lost space after restoring from time machine

    Yesterday, I reinstalled mac os, so i backup my mac with time machine. After a new hard disk relace, the installation and mac os update, i restore my pervious mac file from time machine. However, I can't find any files in the mac after restore. And the mac lost many space that it is 223.74 free out of 479.24GB (it is 252.88GB in "other", but i don't know what is "other" and where i can find it.) What is problem?

    See
    About kernel panics,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics,
    How to troubleshoot a kernel panic, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • IMac won't startup after restore from time machine

    After I restore my backup from time machine ( twice ) mi iMac halt at startup and won't startup. It stuck at the apple logo forever.  I also restarted holding down command R safe mode and install OS X and it will startup okay but can't see my buck up files and applications here. Then I restore from time machine again using an earlier backup and it won't startup again. Please any help I will appreciate.

    There could be a few reasons for this.
    First what version of OS X do you have installed?
    What version of OS X is the Time Machine Backup file from?
    Did Reinstalling OS X from Recovery install the same version you had before reinstalling?
    If you have not changed OS X versions then:
    It sounds like there may be a bad file in the backup that is causing the computer to not startup after restoring it. This is especailly true if the computer boots just fine after a fresh installation of OS X, but without the Migrated Data being restored.
    If that is the case, then the solution is not a quick one. You have to hunt down the bad file.
    Moving Files Manually (Not in Migration Assistant)
    Manually access your Time Machine backup folder from within Finder (you should see the backup drive in a Finder Window or on your Desktop). Once open, manually move data from the User folder (documents, music, movies, photos etc.) into their respective folders on the Mac. Reboot after each folder you move to see which folder contains the corrupted file then delete the affected folder/file after reinstalling OS X from Recovery.
    If none of the files cause the computer to hang at startup after moving all your User data, then the issue is from within the System or Library folders.
    NOTE: DO NOT manually move Applications, System, or System Library files over to the Mac. You can cause major issues with the current installation by doing so. It is safer to just reinstall all the Apps from wherever you got them so they can recreate their support files and such themselves.
    2- Using Migration Assistant
    Basically, if you have discovered the affected file. You can just simply delete it from the backup folder.
    Reinstall OS X after you have done that, and use Migration Assistant to automatically migrate the data over minus the affected file/folder.
    Its a pain in the rear, but it will at least let you salvage most of your data.
    Let me know what happens riorec!
    - Captain

  • Blue screen after restore from time machine

    hi,
    last week I needed to restore my whole OS on my Mini from Time Machine (USB HD). After the restore my Mini only shows a blue screen with a circling sun. I tried to use an older backup (2 days earlier) from time machine with the same problem. From my Macbook I connect via ssh to the mini and can view the running processes but I don not get the login window or the usual GUI. How can I solve the problem?
    dertankwart

    Hello a:
    Here is the Apple knowledge base article on that issue:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
    Barry

  • User account to available after restore from time machine

    After havi g to erase my hard drive and reinstall Mountain Lion I could not aces my time machine backup during the installation process. Have been able to access The drive and perform restores from Time Machine however I cannot access my User account. If I try and add the account inSystem Preferences it states that the account with that name already exists but it is not available to log in to.

    Hi, and welcome to the forums.
    There are a few possibilities. You've posted in the Leopard Time Machine forum, but your signature says you're running Snow Leopard. If you used a Leopard Install disc to restore a +*Snow Leopard+* backup, that's the problem. Try again with a Snow Leopard Install disc (you can use either disc to restore a Leopard backup).
    If not, why did you restore? If you were having, say, internal HD troubles, it's possible that they corrupted your installation of OSX, those changes were backed-up by Time Machine, and restored. If that's a possibility, try the restore from an earlier backup.
    If nothing seems to work, do an +*Erase and Install+* of Leopard, if that's what you're running; or start up from your SL Install disc, select +Disk Utility+ from the +Utilities Menu,+ erase your internal HD, quit Disk Utility and install OSX.
    When your Mac restarts with only a fresh copy of OSX, +Setup Assistant+ will ask if you want to transfer your data from another Mac or Time Machine backups. Do so -- see #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum), for details.

Maybe you are looking for