Very Poor Quality when burning to regular DVD

Can somebody tell me why when i burn to regular dvd the quality looks like a vhs video which is out of focus ? When i burn to blu ray its crystal clear !! I dont expect great great quality but i would expect something that is watchable !!

Well if you are working with Premiere Elements 10 or above and want high Blue ray Quality content on DVD discs, then you have got the option of AVCHD disks in Share->Disc->AVCHD.
But due to high bit rate, the amount of content that can be burnt on to AVCHD disks is much lesser than on to DVD disks.
You can change the bit rate and increase the amount of content that can be burnt(but that will once again start diminshing quality)
You will have to manage this quality-size tradeoff.

Similar Messages

Very poor quality when viewing DVD on TV

Hello,
I have searched this forum high and low, but every response I have tried to this issue does not seem to work. If anyone can help, it would be greatly appreciated. I am using FCS2 on a new 8-core Intel Mac Pro desktop. All of the footage is shot on High Def AVCHD Cameras and ripped from Log and Transfer in FCP. My video is about 1 hour, 5 minutes. The problem I have is that the quality looks great in the MOV file export, but when I burn it to a DVD, it looks like garbage. It's all grainy and the quality a really poor. Here is my workflow:
1) Video is created in Final Cut Pro (no chapters at this point), its all 1 video
2) Video is exported using Quicktime. I use the selected settings, and uncheck Recompress All Frames, and select use chapter markers
3) I compress the video for SD DVD in Compressor, using 120min Best Quality DVD, default settings with this option.
4) I put the audio and video file in my assets for DVD Studio Pro, then Drag them onto the video. I removed the menu item, and changed the video to "play first". I then click Format/Burn.
The DVD formats and burns, and it plays fine. But the quality *****. The raw MOV file looks great. It's clearly interlaced yet at the time of export from FCP, but I am assuming that is normal. Any ideas, or am I doing anything wrong?
Thanks,
Brandon
Message was edited by: Brandon Rohde

Brandon,
I suspect we are missing a few factors in your situation. Let me ask a few questions and make a suggestion or two so we can figure this thing out.
1) What is the make and model of your TV?
2) Are you telling DVD Studio Pro that the movie you've converted to SD is anamorphic?
3) You did tell Compressor you wanted the SD movie to be 16:9, didn't you?
4) To help troubleshoot, try this: In FCP, mark In to Out around a ten second portion of the Timeline, and go to File > Export > QuickTime Movie. Make it self contained but do not re-compress all frames.
5) Quit FCP, open DVDSP and change the Preferences in DVDSP to create an HD DVD title. Import the QT Movie you exported from FCP, drop it into a vidoe track, make it a First Play on the disc and Format it onto your hard drive. Play it in DVD Player and tell us how it looks.
6) If it looks fine, burn it to a DVD disc and play it in your Apple computer. How does it look?
7) Now create a new project in DVDSP, make it a SD DVD project, import the same QT Movie you exported from FCP. Drop it into a video track, make it First Play on the disc, and Format it. Play it in DVD Player. How does it look?
8) Then burn it to a DVD and play it on your Apple computer. How does it look?
9) Now, play it in an external DVD player on am SD television. How does it look?
Please do all that, then reply back to this thread with the answers to all of these questions. I think we'll be closer to resolving the problem after that.
Do not reformat your hard drive or reinstall your OS yet. It is far too soon for that over-reaction. Maybe later, but I seriously doubt that will help anything.

Very poor quality when exporting slideshow

I am using a Canon 5D, and when I view the images in Full screen. They are gorgeous. I created a slideshow. When I play the slideshow in Aperture - again they are gorgeous and crisp, however when I export these images to a Quicktime movie they look blurry - almost like they were taken with a regular point and shoot.
I have selected Export > HD 720p
I understand that slideshows are generated from previews, so I went to Aperture > Preferences > Previews and selected Photo Preview > Don't limit & for Photo Preview Quality I selected 12 (high).
I kept the 2 selections that were there on default selected (these are: new projects automatically generate previews, and use embedded JPEG from camera whenever possible)
Then I selected all of the images in the slideshow, and when I right clicked and selected "Update Previews" I received the message saying that the previews were already up to date. I exported the slideshow - and the quality was still poor.
I then tried to update the previews from the items in the individual libraries themselves instead of selecting the images in the Slideshow (hoping that would make a difference), and tried to update the previews. But I got the same error.
What am I missing? Why am I seeing excellent quality when I preview the slideshow when I click the Full Screen play button - but when I export it to 720p HD it looks horrendous.
Please help!

FTF you need to hold down the alt key when selecting the images and choose generate preview. The update preview option maintains previous settings. Using alt/option creates a new preview.
Second HD720p is still significantly below the resolution of your display so the images will look softer.
But try the previews first and post back.
M.

Very poor quality when importing a video done with CAMSTUDIO

Hi,
I am using a video done in camstudio. THe source video is perfect, very sharp all excellent.
when i bring it into Priemiere CS4, the quality ebcomes horrible making it almost unviewable (for annoying)
you cans ee here the final result (horrible)
http://vimeo.com/13357742
while the original result was awesome....
The video captures in Camstudio was full screen, the Premiere Settings where set at DV, Widescreen...but trying other settings didn't help either
Some help please
thank you

What frame rate did you use for the screen cap?
What frame rate did you use to process the .camrec files?
What format and codec did you use to process the .camrec files?
Do you need to show the whole screen for the whole video? If so, you need a Pr sequence that matches the frame size of your screen cap. If you want to zoom in to highlight certain areas of the screen, then you need a smaller frame size for your Pr sequence, but it still should have the same aspect ratio of the original capture.
Finally, your screen cap is progressive. Make sure your Pr sequence is set to No Fields.
-Jeff

I must be doing something stupid: Very poor quality DVD rendering!

I am new to Apple products and after trolling this forum, I was able to create a DVD using iDVD on my Mac mini Core Duo - 2Ghz model. But, the video is of very poor quality (compression artifacts). I am lookging for guidance to creating a better video quality. But first, let me give you some background...
I have created enough DVDs for my home videos captured both from my S-VHS camcorder and min-DV camcorders (both PAL and NTSC) using Pinnacle Studio (buggiest software in the world) and Adobe Premiere Elements under Windows. I have clear expectation of video quality and understand the quality differences between various standards.
I have a fairly new toy - Canon Powershot TX1 digital camera which is an amazing compact camera that shoots 720p video @ 30fps and stores them in MJPEG format. Very good optics (10x optical image stabilized zoom). The only con is that it has very poor low light shooting ability.
The steps I took to create this DVD...
1. Import the .avi and .jpeg files from my camera into iPhoto library.
2. Use iMovie (all part of iLife'08) to stitch the avi clips and also some of jpegs. Added transitions, titles and music in iMovie.
3. Also, added some of my old low resolution avi files (from my older Canon camera - probably in 640x480 resolution).
3. Exported it in the largest file mode (960x540) which created a 1.8GB file.
4. Opened this movie file in Garageband and added the Chapter markers.
5. Shared it with iDVD which automatically launched iDVD and showed the chapters in very nice scene selections menus.
6. Invoked the Burn menu to burn the movie into a DVD using iDVD.
Am I using the right methodology (I want the chapters)? I also observed that an earlier project which was pure 15 minutes of 720p content created a 4.7GB size exported file from iMovie whereas this current project has 51min of avi (of which about 10min is low res and the rest is in 720p format) and 12min of still photos produced a 1.8GB file when exported. This clearly tells me that the exported file is of poor quality. Why did that happen? Was it because I mixed the content and included low res videos?
I should probably try creating a DVD from the pure 720p content and see how that looks.
Any pointers would be a great help. BTW, the mac mini, iPhoto and iMovie forums are just awesome. The quality of posts and responses is very high.

Thanks a lot, F Shippey.
I exported it as a .dv file and then I was able to produce the DVD correctly with the Revolution theme and 11 chapters. I haven't done any editing any clips yet in iMovie. In most cases, I will not need to do that in most cases as the Canon TX1 creates individual avi clips every time I record and stop a recording. Having used a camcorder for over a decade now, I know how silly most of the recordings are.
I will be rendering most of my videos as h.264 so that I can use the mac mini as a media server instead of using DVDs. I have to rip my own DVDs as h.264 soon (back to handbrake).
PS: While creating my first DVD in OS X + iLife'08 tools, I noticed the following bugs:
1. The clips disappear from the display in the editing window when the project becomes large and I had to zoom in and out to make them reappear. I verified that I wasn't viewing past the end of the last clip. If I hover the mouse in the blank window, it will show the clip in the preview window on the right.
2. I had 11 chapters marked in Garageband and then I shared it with iDVD, it created two pages of scene selections with 6 chapters in each page. In the 2nd page, it added a random window (unconnected) for the 12th chapter that I didn't have. I didn't check for that and so my finished DVD has this weird 12th chapter with a copied moving clip in the window, but when selected, it doesn't do anything.
These two bugs are way few compared to what Pinnacle Studio threw at me.
Message was edited by: new2appletv

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Very poor quality ichat video

I am new to ichat and I have very poor quality video links with my family. One in CA and the other in TN both are on macs. They are both very fragmented and broken up. Also there is a huge delay in the audio. Please help....I can't see my new nephew. Thanks

i am also having issues with my ichat video quality, and there is a delay on audio sometimes. i chat with my friend in philly; i am in brookyn, ny. sometimes the audio is in sync, and then sometimes we have a delay. but the video quality is so blurry on my end...i can barely see her. but her video of me is fine. my preview screen looks great, the connection doctor says everything is good.
i'm not very good with macs tho and computer jargon. i need someone to help me, but who can walk me thru this stuff like im in first grade.

Very poor quality on photos made with iphone 4

Since a few weeks i've noticed that photos made with my iPhone 4 have a very poor quality. I've upgraded to IOS 4.3.2 thinking about a software problem, but the quality is still very poor. It´s like out of focus. I submit a just made photo. Any answer? Thanks a lot.
This photo is made with original photo app and no zoom.

Only thing I can think of is a focus problem (which could be software) or a lens with some junk on it that causes some blurring.
Can't offer a solution but can make some suggestions.
Take different types of pictures and, just for variety in case it reveals something, take two of each - one touching the screen and then one after touching for comparison.
Do close-ups and distance shots. Do indoor and outdoor, with and without flash on the indoor - again, of the same thing so you can compare.
Might reveal a pattern. If all are bad, then it probably goes back to the lense or software not working.
If some come out fine, it would seem to reduce the chance of it being the lens being dirty or something. On the other hand, if close up shots look good but distant ones don't, it could be either software or the internal focusing hardware isn't adjusting enough for distant shots.
Just some things to consider.

Elements 9 Projects plays fine on computer however when burned to a DVD it drops the last part

Hello,
this is my first post and first Question ever on Adobe site. I hope thatt someone can help. I have used Elemenys 3.0 for a number of
years. I have now upgraded to Elements 9. I am having an odd problem with a project that I am working on. Everything seems to be OK on the EDIT
and on the DVD PREVIEW mode ; However when burned to a DVD, I am loosing the last part of the project, and the laat scene button does not take me to the correct scene, It takes me to the one just BRFORE it. When the burning process is done, it shows that it all went well. No error messages. Does anyone have any thoughts as to what is causing this?

hi photonutguy,
Since your question is about burning your video to a DVD disc, it is actually an Adobe Premiere Elements question. This forum is specifically about Photoshop Elements and is frequented by people who use Adobe Photoshop Elements for their photos.
there is a separate forum for Adobe Premiere elements where you will find the people knowledgeable in the video process for burning that DVD with menus at
http://forums.adobe.com/community/premiere_elements
So I recommend that you post your question at that Premiere Elements forum .

Export to HQ DVD very poor quality

Hi all,
I've been trying to export to an HQ DVD, meaning I've chosen the highest settings, ending up with a 5552Mb File for 75 mn... which I believe would be enough to have a very high "normal"definition .
ok I know it wouldn't fit but I burned 10mn of timeline with these settings, to check, and the quality is very poor. I believe as bad as a VHS second generation copy... My titles appear like a very low photoshop jpg compression, and all lignes and shapes are surrounded by some kind of compression artefacts not acceptable even in normal def. (not mentioning the interlaced lines at the edit point when the clip has been altered in size or color etc...) You get the picture...
I had a look at the calculator, that is not much help finally when exporting from premiere.
What I want to do is export my (xdcam hd 50mbps 1080 50i).mxf timeline to a beatiful dvd that everybody can play....
Should I go for a third party encoder?
Also, It seems that when I export and burn through Encore, I get a slightly vertically stretched frame, that ellipses the perfect circles I have on the timeline. Although I respect the pixel ratio of 1.0, 16.9 screen... wide screen etc... I always get this stretching. (Playing the file from the pc is correct.)
What puzzles me is to see some nice SD DVDs around, burnt from HD files and I'm not able to get at least the same results from a broadcast approved camcorder and premiere CS6.
Export settings are:
Help please... Thanks.

Glad to help.
I have been using Encore every since it was first released and on many occasions I have pruduced MPG files encoded at different rates so that I can demonstrate to the audience at my presentations how the different settings can affect the end MPG movie
With Encore I have found that the settings I gave you earlier give the best compromise results, in my tests having the max setting at its max position and the target above eight can produce flawed mpeg files. this is not as a resullt of one off encoding but I have repeated it with each version of Encore with varying results, certainly using Encore in my CS5.5 Suite produces softer DVD's than earlier versions, in my opinion that is..
With HD source my Panasonic HMC 150 Encore produces reasonable MPG SD files but the Canon 7 D produces more artifacts.
Enough of a remeniss and ramble, good luck
Addiitonally with the completed DVD there is a distinct difference depending upon which DVD player is used, using the same DVD my Sony 3D bluray player upscales better than my Panasonic Bluray recorder, whereas at a club I go to the Pioneer AV amp upscales the DVD even better, therefore I would conclude that the device playing back the DVD can have a vast effect on what you see.

Poor resolution when burning in IDVD

I'm trying to create a slide show using ken burns effects, transitions, music and then burn to a dvd to share with family. I was told the best way to do this is to create the slide show in I-movie, share it to I-dvd, and then burn it. When playing back the dvd on my computer or in a dvd player hooked up to my tv, the video (images) are horrible. The images have ripples in them. I use the highest quality encoding in the project info tab. When viewing the slide show in i-movie, it looks great. I'm using dvd+r discs. Any thoughts on how to fix this or is that the best I can do with i-dvd? I've noticed in this forum that other people seem to be experiencing the same problem. Any help would be greatly appreciated.

I thought I'd mention a few things...
1) Sometimes using high def pictures causes problems. The solution, to help prevent flicker for instance, is to use a "guassian blur" of about 5 pixels in photoshop. I assume aperature allows you to blur. Reducing the sharpness just slightly can help a great deal with some issues. Take a good look at your current project. Are there some photos which look better than others? If so, take note of those qualities. Sometimes light, color, texture, contrast, lens length make big differences for me. After doing this a while, you almost develop a sixth sense as to which photos will be problematic.
2) Look at the speed with which are using the KB effect. KB will look a lot better if it's done slowly. Of course it's not as interesting but it reduces problems.
3) Save as a disc image first, to make sure the problem is not in the burning or in the disc. Most in this forum recommend dvd -r for the final burn. Verbatim are very popular. And burn at 4x or less.
4) I have tried photo to movie, and it's a nice app. I did find the colors grayed out, however. If you use photo to movie, you'll want to punch up the color in photoshop (aperature) before importing into photo to movie. I prefer imovie 6 myself.
I hope these comments are helpful. Good luck and let us know how it turns out.

Why poor quality when I export in HD?

I've shot some video on a Panaonic HDC-HS9, imported in original quality, edited it up, and want to export it in HD quality, for later use on DVD and YouTube HD.
When I export it using the standard setting HD 1080x720 (in the export movie... option), the quality is pretty poor, nowhere near HD standard, although the original footage is crystal clear.
Am I importing wrongly? Exporting wrongly?
The exported files are about 100MB per minute, so should look very sharp on my MacBook screen, rather than fuzzy.

I'm kind of a novice at this stuff, but if you select "Export using QuickTime..." instead of "Export Movie...", you have a lot more options to choose from. In particular, you can choose a 1920 x1080 resolution, which should improve the quality of your movie (but it will take about 4x longer to export and the file will be about 3x bigger). There are a lot of other choices as well... wish I knew what they all meant!

Slideshow in iDVD'08 - why such VERY POOR quality

Is there any possibility to change settings on how separate slides are handled regarding to their compression???
For now everything looks marvelous until I begin playback of "freshly burned" "iDVD"DVD in any DVD player - slideshows are of APPALING Quality!!!

dito here....
Used iMovie07 (08) to create an hour long slide show, with music and transitions. Found out I couldn't do chapters (bummer) - sent it to iDVD08 and selected Scene Selection (to at least be able to jump ahead in the video -- even though it wasn't specific), then burned it to a DVD. The video looked great -- but the Scene Selection buttons wouldn't work.
I decided I really wanted chapters, so read discussion threads/asked questions about ways to do it. (1) Garage Band or (2) iMovieHD. I tried both with lots of user error due to my misunderstanding of the format to use to export the file to Quick Time. Anyway, many days later --- today I was so excited to finally have accomplished getting chapter markers in the movie (iMovieHD), exporting it to iDVD08 and creating my disk image to check it all out.
The Chapter Markers worked beautifully -- no problems. But, my video is absolutely horrible quality (as viewed on my computer). I used the Ken Burns effect on all of the photos - some quite extremely. When I view the disk image (on my computer) the photos flicker and some actually look like they are movie pictures --- water is moving, grass is blowing --- kind of a cool effect for a moment or two. Then it is very difficult to watch. I'm so disappointed.
I appreciate the post where it was pointed out that watching on the computer is different than watching on a TV. I will go ahead and burn this, just to see what it does look like on a television set -- but i can't imagine that it will be okay.
The movie I made by going directly from iMovie08 to iDVD08 had good quality when I burned a DVD and viewed it on my television. I'll go back to it as my final - if need be. I guess the process of exporting to Quick Time, importing to the older version of iMovie and then back to iDVD had to take it's toll, eh?

Any Way Of Removing Bad Panning Judder When Burning HDV to DVD ?

I have tested this many times and haven't found a cure using iDVD.
When I make a DVD from HDV footage I get very bad judder on vertical lines (lamp-posts, window frames etc.) whenever the camera pans, even extremely slowly.
I also get judder from people walking slowly across the frame.
This happens whenever I Export>QT Movie in FCP and burn in iDVD (using any of the 3 quality settings).
The only cure I have found is to Export>Using Compressor and then burn the DVD in either DVDSP or Toast.
Unfortunately the MPEG2 files can't be used in iDVD.
For various reasons I would, if possible, prefer to use iDVD.
Has anyone come across this HDV problem and found a way of eradicating it in iDVD ?
It would appear that the QT Movie is the weak link causing the problem.

The problem only occurs in iDVD (and Toast) when the encoding is to DV-PAL, HDV
Keep in mind I don't work with PAL at all nor do I own an HD camcorder yet.
But I've seen this same situation before on this forum when working with PAL only.....
I'm wondering if JES deinterlacer will help here or not?
http://www.findmysoft.com/mac/JES-Deinterlacer-download.html
@F Shippey ..... any thoughts here Fred?
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Help please -My HQ photos are being rendered in very poor quality in iMovie

Hi there
I have a problem I cannot solve in iMovie (HD 6.0.3).
I am making a movie/slideshow of photos using very high quality photos imported from Aperture. I'm finding them incredibly BAD quality when it comes to the rendering of finished product, the most obvious problem being the pixellation (seen as wavy lines) when the Ken Burns effect is used. It looks the worst on a plasma television, which it is being made to watch on.
I have burned it at the highest quality I can find, but there is still no improvement. Can anyone help please? I'm doing this as a gift for my parents, but don't want to send them something of inferior quality.
Thanks!
Carly

if you've burned it to DVD, then its probably a standard definition iMovie project which means that is 480 lines interlaced. it makes no difference how high quality the originals are, they'll still be re-sized down to 480 lines and since its interlaced, that means that you're only ever showing every-other line. and because standard definition alternates between the odd and even numbered lines, you'll probably see lots of shimmering in the highlights. it will look worse when you try to stretch it across a high-definition TV because there's interpolation going on to up-convert the whole thing back to the 720 or 1080 lines of high definition.
in short, you'll never really get super-high quality from a standard definition TV and you'll only get good results on a high-def TV if you keep everything high def (720p or 1080p) throughout the entire workflow. and until Apple updates its software to handle Blue-Ray or HD-DVD authoring, it'll be very expensive to master those kinds of discs!
best of luck,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

Very Poor Quality when burning to regular DVD

Similar Messages

Maybe you are looking for