Very recent problem with Photostream

This just started yesterday (6/12/13). I am not able to view any of my shared photostreams on my iPhone. I have not made any setting changes. I also do not have the option to 1) create new photostreams from said iPhone and 2) the option to publish a photo from an album or the camera roll on the iPhone to any of my photostreams from the "share" menu no longer exists. Not sure how that option can just "go away." I am running iOS 6.1.4 on an iPhone 5 that is approximately 1 year old.
I have tried turning on photostream and turning back on. I have rebooted and soft reset the iPhone. I have performed every procedure short of a complete restore (and am trying to avoid this as I have a 64 GB version with only 8 GB free so the time it takes to restore all of this data is excurciating).
I appreciate any thoughts and comments on what might be causing this (or other's experiences). I have also double-checked, signed in with correct Apple ID on all devices, the shared photostreams do exist as evidenced by checking on both my wife's iPad and on my MacBook Pro from within iPhoto.
Thanks in advance!

If those options still do not show up till tomorrow, I would be looking at possibility, that all that data that you have on your phone is affecting it's performance. In that case you, in order to fix it, would have to restore as new and not go through that "excurciating" process anymore. Good luck!
And just to clarify, I do see all regular options for photostream share.

Similar Messages

  • Problem with Photostream on a PC with VISTA

    Problem with Photostream on a PC with VISTA
    I have latest Vista SP installed. I installed the download for ICloud for Vista Control Panel. I followed Apple's instructions and am unable when I snap a picture to have it downloaded on my PC to the default directories. 
    I have done a iCloud backup a couple of times.
    I have changed the directory destinations, turned off my firewall, and still not getting the pics on my PC.
    Help is appreciated. Thanks..

    Well, the problem has been partially solved. When using the  free Camera Plus app, all works as it should. All pics that I take download successfully.
    Does this mean that the the Apple Camera app is defective?
    How do you fix this app, cannot be deleted on the IPOD.

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • TS1559 My iPhone 3GS will not now join wifi.  This is a very recent problem and I have tried everything so hope someone can help.  I go Settings then Wifii, it picks up network no problem but then does not download IP Address.

    My IPhone 3GS will not now join wifi, this is a very recent problem.  It finds my network but does not download the IP Address hence when I load password Join remains grey.  I have tried all the fixes suggested I.e.  network reset, airplane on then off but still nothing.  I also have another iPhone of the same type and an iPad and they are just fine so I know it is not a router problem.  Please please what do I do?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Very big problem with JSF about FORM and "id=" for HTML form's elements and

    I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
    Suppose you have something like this, to render some datas form a Java Beans :
    <h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name"/>
    </f:facet>
    <h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
    </h:column>
    </h:dataTable>
    Everything works fine...
    Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
    <td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
    You think you can use the java instructions :
    Enumeration NamesParam = request.getParameterNames();
    while (NomsParam.hasMoreElements()) {
    String NameParam = (String) NamesParam.nextElement();
    out.println("<h4>"++NameParam+ "+</h4>);
    YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
    Edited by: ungars on Jul 18, 2010 12:43 AM
    Edited by: ungars on Jul 18, 2010 12:45 AM

    While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
    However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
    In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
    "Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
    If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
    https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
    If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
    I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
    Ed

  • HT1918 Hello! I Have very much problem with programs App Store! Refund please money too my account!!! Xilisoft dvd maker 7 don't work,Adobe Premiere editor 11 don't work!!! I fear purchase content out of App Store!!!

    Hello! I Have very much problem with contents and programms App Store! Refund please me money to account!
    1.Xilisoft DVD Creator 7 Dont Work
    2.Adobe Premier Editor 11 Dont Work
    I fear purchase yet programms out your App Store!!!!! Realy!!!
    Wery Much ''go begging'' refund money Adobe Premier Editor 11! Best Regrads,Alexandr Cherepennikov! Sorry,wery bad my english!

    We are fellow users here on these forums, you're not talking to iTunes Support (this is the iTunes Store forum), nor Mac App Store Support.
    You've tried deleting and redownloading those programs, and tried contacting their developers ? If you have, and you haven't had a reply, then you can try contacting Mac App Store Supportv via this page : http://www.apple.com/support/mac/app-store/

  • I have a very big problem with my mac book pro. It continously looses the wifire connection. This happens every 5-10 minutes and is getting to be a very big irritation. I have tested my wifiresignal

    I have a very irritating problem with my MacBook Pro. It keeps loosing the wifi connection - every 5-1o minutes!!!
    I have testet the wifi signal and had my router checked - both are fine.
    Please tell me what I can do :-(
    John

    First you should check on another Wifi to see if it's your Lion machine.
    If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
    You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
    If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
    http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

  • I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

    I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

    The specifications define an operating range up to 35 degrees.

  • A VERY weird problem with the screen?!!!

    Ok, first of all, I apologize for the title of the question above, it was difficult to put my problem into words.
    I use the Instagram app a lot on my 3 month old retina iPad.  I have pressed the little thingy on the bottom right of the screen that reads ( x2 ) and always use the app in this bigger form.
    When I brows the internet or read a book I have no problem, but today when I opened a picture with a dark brown color I noticed that there are parallel vertical lines on the screen that are of a lighter shade. I naturally though it was a problem with the picture so I checked it on another one and they are still there. Very faint and hardly noticeable but THERE. 
    Now to the big surprise.
    I realized the vertical lines are a faint outline of the Instagram app!!!!!!! The lines match the lines on the popular page (or people's accounts) where the pictures are placed in columns, the parts that are black between the pictures? Those perfectly match the faint lines on my screen!!!
    Guess what.
    After a few minutes of shock I noticed that there is even a faint outline of the home button too.
    WHAT is this?
    What could have gone wrong?
    My iPad has never been dropped, never in contact with water, never over heated, never opened....
    WHAT?

    I don't know if that will help at all. I just didn't realize that you had it turned on, that may have nothing to do with it, but its worth a try. At least it will be something that you can eliminate.
    If rebooting the iPad helped at all, you can consider resetting all settings. When you do that though, you must re-enter all of the device settings again. It's sort of a pain to have to reset all of your customized settings and it will take some time, but it doesn't erase any data. It does mean that you have to re-enter WiFi passwords, turn Siri on agai, allow apps access to location services and photos .... All of that good stuff.
    I hope for your sake, thatit's just some weird anomaly going on with the screen right now and that it will correct itself. You could try closing all apps in the recents tray, restart the iPad and see if the ghosting goes away. That's harmless enough to try.

  • Recent problems with Windows Update with Thinkpad 8

    Since last week I've started having problems with Windows Update on ny Thinkpad 8. It seems to be related with some recent update. At first I received different error codes. As I don't have many programs on my tablet, I refreshed it and set up Windows and Office again. I ran WU, and after the first update (with 100+ updates) WU was working ok. However, after a second set of updates (probably the most recent) I've started receiving error messages again. Most recently I am receiving code 80070002, and the error seems to affect only the installation of Windows Defender definitions through WU -- other WU updates install correctly, and most of the time I can install Windows Defender updates through Windows Defender. I have already tried the Windows Update Diagnostic tool, but the problem persists.

    thanks farby

  • Recent Problem with Grouping in P6

    Recently I am having a problem with the grouping activities option in P6, 8.2.  While I used to be able to group with no problem, now when I try to perform a customized grouping, I am not able to get to the grouping bands.  It seems like this is a P6 software bug, not a database bug.  Has anyone seen this problem before and if so, how did you fix it?

    Hi,
    This is a known issue. As a workaround you just need to expand the window. For a solution, please refer to:
    Fields Are Cut Off Or Missing In P6 Dialog Boxes With Incorrect DPI (Doc ID 897035.1)
    ========
    Was our answer helpful?
    If so, highlight the information for other Community members by rating it or marking the answer as correct.
    Just hit the “Correct Answer” link on the answer, or rate it by clicking "Helpful Answer" or "Like".

  • Recent problem with i-Tunes on my computer

    Can anybody help me?
    I am still using OS X 10.1.5 (Thanks, I really know there are much newer an much better versions!) and installed iTunes version 4.7.1 a long time ago. I never had any problems with this version of iTunes on my computer and could buy, download and listen to any song I wanted.
    Since iTunes 7.0 is on the market, I can not buy and download anymore. I am not interested in iTunes 7.0 (simply because my operating system is not "sufficient" enough), but I really would like to use my version 4.7.1.
    This seems to be impossible. Each time I click the "buy" button, I automatically get switched to the apple store and I am asked to install version 7.0 of iTunes (which requires a higher OS X version than I have).
    I have the feeling I am in a loop. Can anybody help me out? And I mean in another way than to tell me that I really should buy a more recent version of OS X.
    Tx
    Frans
      Mac OS X (10.1.x)  

    O, vast wel.
    Het vervelende (en logische) is dat er zo af en toe zaken veranderen die niet meer werken met oudere versies.
    Kennelijk is nu iTunes 4.7.1 aan de beurt en 'obsolete' verklaard door Apple, hoewel oude versies (op één van mijn Macs draait iTunes 2.0.4 nog perfect onder OS 9.2.2) nog perfect werken.
    Ook de beveiligingsschema's veranderen zo nu en dan.
    Éénmaal met versie 6 of 7 gekochte liedjes zijn niet meer af te spelen met oudere versies.
    Het is vast wel teleurstellend voor jou, maar je zult moeten upgraden om nog wat te kopen in de iTunes Store.
    Menno.
    17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner   Mac OS X (10.4.8)   iTunes 7.0.1

  • Very frustrating problem with Photoshop Elements 10 - can anyone help?

    I don't know what's happened, and I haven't changed any of the settings or anything.
    When I open a photoshop file I am currently working on, now, no matter what I do, nothing changes in the actual photo. Even when I delete layers to see if it reverts back to the original photo, nothing changes. When I try adding new layers, nothing happens, when I try adjusting something such as opacity, or brightness/saturation, nothing changes.
    I've tried opening/creating other photoshop files and I have the same problem, so it seems a problem with the actual software, rather than individual files. Even after uninstalling then installing the software, the problem is still there.
    Does anyone have any idea what is causing this? Or could you direct me to a good help forum/source?
    Many thanks

    Welcome to the forum.
    I would go to the Photoshop Elements Forum, and look for Loraclf's post there, or post with your problem, your equipment info, and the problem. Someone there will be able to help you.
    Good luck,
    Hunt

  • Very urgent : Problem with field attributes in Datasource

    Hi
    I am getting a problem with field attributes in the datasource.
    The issue came up after i modified the extract structure-i modified one field and
    added one field to the structure.Now those two fields are not visible in BW.
    When i checked with transaction rsa2, i could find that for those two fields , the
    field attribute is <b>'A'</b> which is <b>'Field in OLTP and BW Hidden by SAP'</b>.
    I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
    Please let me know what can be the issue.
    Regards
    Leon

    Hi,
    did you change this attribute via RSA2?
    you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
    Replicate your datasources in your BW.
    Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
    Maintain your TRules
    Activate
    hope this helps...
    Olivier.

  • Why won't my purchases from iTunes download to my mac pro.  I purchased them from my iPhone and iPad and they won't transfer automatically like they used to.  Is there a recent problem with this?

    Is there a problem with itunes today?  I purchased songs form itunes on my ipad and iphone and they didn't transfer to my macpro.  Even when I plug ipad into my mac they still won't download to mac.  There was no problem before today.   Thanks

    Yes, I think there is definitely something wrong with iTunes but I don't think it's happened this year - think it was the last update.  If I purchase anything using either my iphone or ipad it doesn't download on my imac.  Not every time just most.  Also, some of my album artwork is messed up.

Maybe you are looking for