Very slow 3GS back up since 3.1 and iTunes 9

Hi my first post on here, I was wondering if anyone is having the same hassle as I am, my 32GB 3GS has been connected for two hours now and its roughly a fifth of the way trying to back up despite a back up yesterday prior to 9 being installed, no large files have been added just a few sms since last back up, this is rather annoying along with the dazzling white background of iTunes 9
Anything I can do to speed things up a little, or should I say a LOT???
Cheers
Message was edited by: Lava_Head

welcome to the discussions
not experienced it myself but many point to photos as the culprit...
copy all your pictures out of your phone (iphoto) and then see if the sync speeds up... if it does leave feedback at http://apple.com/feedback/iphone.html to let them know of the issue.
i noticed the off white backdrops as well... but we must really have liked the black look because several friends are oblivious to it... i mentioned that itunes has gone off white and they all claim to not have noticed it (i guess they live in coverflow mode )
be well

Similar Messages

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

My firefox is running very slow, espically when I am typing, scrolling and in many simple activities. On the other hand my internet explorer is going normally like simple browser.

My firefox is running very slow, espically when I am typing, scrolling and in many simple activities. On the other hand my internet explorer is going normally like simple browser.

Hi,
Please try disabling all the features under '''Browsing''' in '''Tools '''('''Alt''' + '''T''') > '''Options '''> '''Advanced '''> '''General'''. You can later toggle the values to find an optimum solution. Please also [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u see this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Restart the Computer. This sometimes happens to me when I keep my Windows 7 on Sleep, and I try to sync my Ipod
Make sure you have the latest version of Itunes
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

Since upgrade ios and iTunes can't access homeshare on ipad

Since upgrade ios and iTunes can't access homeshare on ipad. I see 'share', when using music app on iPad. I click on it and then select my MacBook Pro. Circle starts goes half way the stops. My Apple TV works great. So iTunes on MacBook must be set up right. Videos app is similar, the circle just spins and spins. My wifi is an apple airport. I beginning to think I have invested badly. I have signed out and in again of home share on iPad and MacBook as advised. I have read and re-read. Is there a solution?

Hello Gary,
Thank you for the details of the issue you are experiencing with Home Sharing. It sounds like you are not able to access iTunes from your iPad using Home Sharing. I found an article with steps that I think would help with this issue.
I recommend reviewing the full article below, but I think steps 4-7 are specifically useful for what you described:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thank you for using Apple Support Communities.
Best,
Sheila M.

OS X 10.5.8 Running VERY slow since installing Safari and itunes updates.

Installed latest Safari and itunes updates today. When my OS restarted the install took a really long time and since then the computer is so slow its un-usable. Its a Macbook Pro, 2.6 intel dual thingy (the model just before the uni-bodies came out).
I have down the PRAM reset and tried launching in safe mode. Neither or these made any difference.
I then started with an install disk installed and while holding down C. Again, it took a long time to boot, but once in that mode I launch the various utilities etc. So I opened disk utility and verify and repair disk...but it found no problems.
Perhaps I should have repaired disk permissions?
Also I thought this might be a lose ram issue or something. I don't have a screw driver to open up RAM slot and re-seat it, but also in 'about this mac' it can see the ram...?
I am very frustrated right now! What have i done to my computer?!
It was running 100% fine until I did this software update.
...and when I say it is running slow, to give an example clicking Apple/N in finder takes maybe 5 for that window to appear followed by another few minutes of the whirling wheel of death. Then I can click on the next item (apps for instance) and go through a similar wait.
argh!

No very clear idea of why it is behaving like that Samuel, but in 95% of cases it is some third party add-on, not yet updated for Safari 5, that is the cause.
Please peruse the following, particularly with respect to Open DNS settings:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Since download of Firefox Hello desktop & laptop both on Windows 7 are very slow even after refresh, download history removed and anti virus software turned off

Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?

Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?

Time Capsule VERY slow ethernet back-up on my iMac

Hi anyone who can help....I'm getting really frustrated with Time machine
It seems quite afew people are experiencing problems with TC....
BUT they all seem to have different issues. Mine is simple.
As a wireless network it works just fine, last weekend i had some friends over and we had 4 laptops going at once - speed was fine
Backing up - My G4 powerbook works FLAWLESSLY, backing up wirelessly.
BUT...My G4 iMac (connected directly via ethernet cable) hasn't been able to do a back-up since got it. It gets stuck on preparing or takes day's (Yep DAY's) to do a few 100 MB.....
Obvoiusly the TC is working, but not the wired connection. I can't try my iMac wirelessly, as it doesn't have an airport card
ANY suggestions? Oh and I don't have any virus software installed

Andrew,
*_Slow Time Capsule Transfer Via Ethernet_*
*Disable Anti-Virus Software*
“Using virus scanning software can make Time Machine backups very slow. If you use Norton Antivirus 10 AutoProtect or a similar product, try turning it off during backups.” [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15140.html]
*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.
Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
*Adjust Ethernet Speed*
Open Network Preferences.
With Built-in Ethernet selected on the left, click "Advanced" in the lower right.
Click "Ethernet" tab on the far right.
What is selected beside "Speed"?
Try changing this setting and see if it makes a difference.
Next launch Airport Utility.
Select the Time Capsule on the left.
Click “Manual Setup”.
Select “Internet” from the toolbar.
Click “Internet Connection” tab.
Near the bottom verify that “Ethernet WAN Port” is not set to a slower speed. Either choose “Automatic” or the fasted speed available.
If you have made any changes, click “Update”. 
*Slow Full Backup After Restore*
Try either deleting the “old” backup disk image or copying it to another disk. Then start the “new” full backup again. Some users have experienced improved speed when the “old” disk image was removed from the backup disk.
Let us know if this was helpful.
Cheers!

Since downloading Mountain Lion, why is Safari running very slow? I've check the internet and it's fine.

Since downloading Mountain Lion, why is Safari running very slow?

You're going to have to be more specific and include some details.

Very slow initial back up

I have just got my new 1TB Time capsule and set it up but it appears VERY SLOW!!!! in 12 hrs it has done 10gb?
I have tried restarting with a LAN connection? I just wondered if anyone else is having the same problem? or any idea why it is so slow?
thanks

If you haven't read it already I would check put the following Apple KB article with tips on TM initial backup to TC:
http://docs.info.apple.com/article.html?artnum=307525
Ethernet cable would be the fastest way to go. There are some applications run in OS X that can slow down TM such as virus checkers. Also file corruptions can slow TM down from OSX running client Mac. If slowness persists frequently delving into the console logs can provide insights into where problems lie. It's also worth bearing in mind wireless networking factors that can slow down network transmission speeds to Mac clients such as interference or range from the wireless access point.

Clips Skipping, stuttering and very slow play back

I understand I'm new to AE but why does every video or clip I try to work with seem to playback very slow and skipping? I'm getting kinda frustrated...please someone tell me how to fix this issue. I have a brand new iMac so I dought if its my system compatability with the software in regards to processing.

Read this.....
....and this.
The second one may be even more important than the first.

Very slow running CUITs in both Visual Studio and Microsoft Test Manager

I've tried the exact same test cases on another less powerful computer and it runs perfectly. However on one machine it runs very slow. It seems to take ages finding execute each step. Not sure what is going on. Help greatly appreciated.

Hi Daithi,
Based on your issue, I suggest you could try to create a simple coded UI test such as you can record the Calculator action and then check if you still get the issue about
running CUITs very slow in VS.
In addition, I suggest you could try to delete all the temp files from your system and other temp files, or in short you can just log off and then log in back again....you'll definitely find your automation run faster.
There are two blogs shared us some suggestions to improve the coded UI test performance, I often use them, if possible, please check them.
http://blogs.msdn.com/b/vstsqualitytools/archive/2011/07/06/improving-the-performance-of-your-coded-ui-tests.aspx
http://blogs.msdn.com/b/visualstudioalm/archive/2012/02/01/guidelines-on-improving-performance-of-coded-ui-test-playback.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

It'd running very slow. Should I clean it off and start over ?, It'd running very slow. Should I clean it off and start over ?

iPad is running very slow. Keeps hanging up over and over

Try simply giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. See if that helps

My iphone 4 seems to be running very slow, i have 25 apps, 365 pictures and 135 songs. Any suggestions ?

My iphone 4 seems to be running very slow I have 25 aps, about 364 pictures and 135 songs, any suggestions?

Hold down the sleep and home buttons, ignore the red OFF slider, wait for the Apple logo, let go of the buttons.

Very slow 3GS back up since 3.1 and iTunes 9

Similar Messages

Maybe you are looking for