Very slow ADMIN gui (/console) and ADMIN mode problems

The admin gui is painfully slow for us for some reason. We're currently running three clusters in on one admin server. There are 55 applications installed spread out pretty evenly on all clusters.
Listing the 10 first deployed applications takes around 50-60s. CPU usage and so forth is fine. This seems to get worse when more applications are added. Some of our other admin servers works fine but they have far less applications installed.
Perhaps not much to go from but has anyone else experienced this ? Possibly cause, solution ?
Note:
version: 10.3
jdk: 1.6_06 (64 bit)
os: solaris
We're also experiencing some serious problems when deploying application, possibly because of the problems with the admin server and that the deployment sometimes just halts (activate changes times out). Servers can all of a sudden be in ADMIN mode, applications can be in ADMIN mode. And servers and/or applications in ADMIN mode is not a good thing since the load-balancers can't handle this situation because the server still listens on the http port while in ADMIN mode. Not sure why this happens but it seems to be connected to when we deploy application, and that part seems to be a hit'n miss thing. It works perfectly sometimes, sometimes it justs halts. A restart of the admin server and then it might work again. Other times it's a restart of all the servers and then the admin server before it works again.
Same as the first question, anyone that has experienced these problems ?
/Laban

Support has "support patterns" to work through these issues and I definitely recommend opening a case. Various things can contribute such as networking issues causing the clustered communication to not work properly. Thread dumps can also be helpful to see where the time is being spent.

Similar Messages

Firefox 12 is very slow to load pages and if two tabs are opening it lags.

Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

I have the exact same problem.
Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
Something is wrong with Firefox 12, it shouldn't be this slow.
How is that each version is progressively worse than the one before it?.
Stop releasing so many versions Mozilla, release one that works and build from there.

Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

I amexperiencing a very slow log in's and speed to my desktop is very slow also. What is the cleanup I have to do to make this faster

I amexperiencing a very slow log in's and speed to my desktop is very slow also. What is the cleanup I have to do to make this faster

How large is your hard drive and how much hard drive space do you have left?
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac.
Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it.
If browser remains sluggish, empty its cache.
Safari/Empty Cache
Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. Which model Macbook Pro are you using?

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help!

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help! What could it be?

It is very possible that you may have some form of Wi-Fi interference nearby that is preventing your AEBSn from providing a clean RF signal on the 2.4 GHz band.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

My Macbook is becoming very slow on start up and operation

My Macbook is becoming very slow on start up and operation. I have tried Mac Keeper but my small 2GB ram is always gone in the simplest of operations.
Any help would be usefull

Hello Chris,
A variety of things could be causing the slow startup. The first place I would look is at the Login items on your MacBook to see if there are items in this list that are set to automatically start. Having applications automatically start will increase startup time. This article has the steps to do this:
Mac OS X 10.6: If items automatically open when you log in
http://support.apple.com/kb/PH6811
The steps from the article should work for Mac OS X 10.4-10.8; the only difference in Mac OS X 10.7 and 10.8 is that the Accounts icon is named Users & Groups:
To permanently prevent items from opening at login:
Choose Apple menu > System Preferences, and then click Accounts.
Click Login Items.
Select any items you don’t want to open automatically, and then click the "-" button.
If you are still experiencing a slow startup after that, you might want to try the steps in the following article:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps!
Best,
Sheila M.

Very slow processing on LSMW and IFS access

Hi all,
we have a very slow processing on LSMW and IFS access. I believe it was slow all the time in the past. This LSMW transaction only converts some data, which are stored in a flat file in the IFS and stores it again into a flat file in the IFS. It is reading the data from IFS and writing again the data into the IFS.
IFS is not fast, I know. But do you have an similar experiences with such LOAD ?!
R/3 Enterprise 4.70 shows with transaction SM50 the following lon running job:
4 BGD 65988    waiting         Yes
5 BGD 65989    waiting         Yes
6 DIA 85421    running         Yes                    1      SAPLTHFB   100 USER1
7 DIA 65993    running         Yes                    11500 /1CADMC/SA 100 USER2
8 DIA 65994    waiting         Yes
9 DIA 65995    waiting         Yes
The WRKACTJOB Display shows:
This means for me the job is not doing so much with the database. Only 439 I/O's in 21 minutes. This is nothing. I have tried to give to this job Priority 19, but this is not the reason, the job is not going faster.
Work with Active Jobs
02.07.08 1
CPU %:    89,0     Elapsed time:   00:21:25     Active jobs:   895
Subsystem/Job Type Pool Pty      CPU Int    Rsp AuxIO CPU %
      WP06         BCI     2   20     395,2                136    0,0
      WP07         BCI     2   19   10274,0                439   12,7
      WP08         BCI     2   20    1156,0                  8    0,0
      WP09         BCI     2   20     874,3                  6    0,0
The WRKSYSSTS Display shows: This means for me, the is no memory lack.
Sys      Pool   Reserved    Max ----DB----- --Non-DB--- Act-   Wait- Act-
Pool    Size M   Size M     Act Fault Pages Fault Pages Wait   Inel   Inel
1    5000,00   1448,43 +++++    0,0   0,0    0,4   0,5   94,9    0,0    0,0
2   60340,00     44,65   3500   51,6 6335 113,4 364,1   7887    0,0    0,0
3     128,00      0,00     10    0,0   1,3    0,2   0,8   17,2    0,0    0,0
The WRKDSKSTS Display shows no problem in DASD.
I/O   Request   Read Write   Read Write    %
Rqs Size (K)    Rqs   Rqs     (K)   (K)   Busy
11,5     12,4     3,0    8,4   13,2   12,1     2
13,2     10,2     1,5   11,6    7,0   10,6     1
10,6      8,8     3,5    7,0    8,2    9,2     2
13,8     12,4     4,2    9,5   10,1   13,5     2
8,3     71,3     7,5    0,8   78,4    7,4     5
17,7    123,6    17,5    0,2 125,2    4,0     9
27,0     83,1    25,7    1,3   87,1    4,3    10
26,9     95,0    25,6    1,3   99,6    5,8     9
16,9    115,4    16,2    0,7 120,3    4,0     8
37,3    116,7    37,0    0,2 117,3   18,0    13
21,4     94,0    20,3    1,0   98,6    6,2     7
12,7     72,8    11,5    1,1   77,6   26,8     6
13,5     85,1    12,3    1,1   92,0   12,8     5
Any idea, here ???
best regrads,
Carsten Schulz
Teamleader SAP-Basis, ebmpapst Mulfingen, Gemany

Hi together,
thanks for answering so fast.
The jobs read from the sysbas-IFS   /usr/sap/a/b/ and writes to /usr/sap/SID/DVEBMGS00/work/ also in the sysbas-IFS.This IFS is not remote. Not through the QfileSrv.400 mechanism.
And yes, we have a HA solution. We have two IASP's on two different iSeries and are using XSM to mirror the data.
I have tried to increase the speed by switching off the XSM mirroring, but the speed does not increase. Sorry.
best regards,
Carsten Schulz

Mail has become very, very slow. Do I have a provider problem or is there something I can do with my Mac to speed it up?

Mail has become very, very slow. Do I have a provider problem or is there something I can do with my Mac?

Couple of steps. One is general housekeeping and the other is performance related.
If you have an extremely large number of messages in your inbox(es) or sent categories, consider the ones that remain relevant and purge those that are not. Do this regularly. Choose the Mailbox > Erase Deleted Items > In All Accounts...
Afterwards, you can start by rebuilding your Mailbox indexes within your individual mail accounts. For each Account in the left panel of Mail under Inbox, select it, and then from Mailbox menu, choose Rebuild (bottom of menu). When you are done, exit and restart Mail.
Still slow?

AIR 3.0 Application Built in HTML/Javascript VERY SLOW on Windows 7 and XP

Hello AIR Team,
The commercial AIR application I'm developing for a client (using HTML/CSS/Javascript) is VERY SLOW on my Windows 7 (64 bit) and Windows XP machines running on the Adobe AIR 3.0 runtime. I notice the poor performance in all aspects of the application, but especially on mouse events (mouseover, mouseout, click).
However, it runs very well on my Mac OS X 10.6.8 test machine AND from within Dreamweaver CS5.5 on my Windows 7 machine.
Chris Campbell from Adobe posted in another topic on this forum that he has notified the Adobe Webkit Team about this issue, but I'm anxious to know WHEN the Adobe AIR Team will release an AIR update/patch to resolve these performance issues.
Any ETA on the update/patch?
~Oscar

This performance issue is tracked in adobe bugbase: https://bugbase.adobe.com/index.cfm?event=bug&id=2958614
It is appreciated that anyone affected by this issue could leave vote notes about how the fix is important for you and your business.
Thanks,
Jian
Adobe Flash Runtime team

My MacBook Pro air is working very slow... And occasionally the screen just has an envelope with a?

My MacBook Pro is moving very very slow and occasionally when the screen comes on it's an envelope with a? What do you all suggest

Your hard drive may be failing... which model MacBook Pro do you have (e.g., "15-inch Late 2011") and which version of OS X are you running?
Clinton

After installing ios7 my ipad keyboard is very slow for texting, emailing and entering passcode. very slow

after installing ios7 on my ipad the keyboard is very slow, delayed. text, email and passcode.

Hi Knackerman, I was racking my brain trying to think how I did this and then I remembered that at the time because of other problems I was having with my iPad and it was under extended warranty, they offered to replace it for me.
When I went to collect new one they asked if I wanted the to download iOS7 and they replied, NO, I did not, well that was enough for me and I told them to please leave it as is.
I just ignore all the reminders I receive to download iOS7 on my phone and iPad.
I am very happy with my 6 version.
I am very sorry I am unable to help, I know how you feel, I hated it, it caused so many glitches to my otherwise perfect iPad before instalment.
Overall though, I think Apple has to shake itself up, they are getting left behind in the Samsung wake.

MacBook Pro 2010 Very Slow Startup for computer and Programs

My MacBook Pro is very slow start up and sometimes fails to. also when using Safari computer will freeze. when opening and closing programs it can take up to 15 min. this all started in the last two weeks. I have also had to update Yosemiti a lot in the last couple weeks. Is there issues with the updates or is there something more going on?

Post an etrecheck report back here, which may give us some clues.
Cheers
Pete

Very slow/non-existant connection and crackling no...

Hi, I am using Homehub option 2 (if I remember correctly, where can I check this?) and as the title says I am getting a very slow and sometimes no connection at all from my boardband, as well as crackling noises from the phone itself for 2 weeks. The connection is so bad I have to use BT FON on my neighbour's to visit this forum. I phoned up once last Saturday and the guy told me there were some construction problems nearby and I had to wait. On Monday I received a text saying the fault had been fixed. I wasn't at home at all until Wednesday so I hadn't the chance to check. However the problem is still there and the crackling noise on my phone is too loud for me to phone them again. Anyway, enough with my rambling. Here's my ADSL line status. Any help will be appreciated.
ADSL line status
Connection Information
Line state
Connected
Connection time
0 days, 00:06:31
Downstream
288 Kbps
Upstream
396 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.3 dB / 3.9 dB
Line attenuation (Down/Up)
50.0 dB / 28.3 dB
Output power (Down/Up)
0.2 dBm / 1.1 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
3 / 410076
CRC Errors (Down/Up)
1 / 874621
HEC Errors (Down/Up)
0 / 0
Error Seconds (Local/Remote)
1 / 146075

ADSL2+ and FTTC only
When first activated, your line is 'fully rate adaptive'. This means there's no upper limit to your sync speed (within the capabilities of your broadband product).
If your line drops frequently, has a high error rate or severe noise problems, a banded profile can be applied to aid stability.
This will force your line to sync within the range of an assigned band and is used to limit the sync rate when it's not stable above a certain rate.
The table below shows the bands used on ADSL2+ products. Details of the bands used on FTTC products has not yet been published by BT Wholesale.
Profile bands
160kb/s - 288kb/s
288kb/s - 576kb/s
576kb/s - 1152kb/s
1152kb/s - 2272kb/s
1472kb/s - 3072kb/s
2272kb/s - 4544kb/s
3328kb/s - 6656kb/s
4864kb/s - 9728kb/s
7168kb/s - 14336kb/s
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Shift + command + f   very slow with cs4 clone and healing tool?

using cs4-- i use the shift + command + f a lot to fade in or out the clone tool and healing brush.
however in cs4 the preview is very slow-- even though i have 8gb of ram!
the same process on the same file in cs3 is rapid-- even with only 2gb of ram-- so i assume this is a cs4 problem?
any solutions appreciated.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
   tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
    at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Very very slow import using LOG and Transfer

I am using a CANON VIXAIA HF10.and the clips are importing very very slow. The max time on each clip is only 5 min or so. Is there a way to speed this up? Thanks.

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

Very slow ADMIN gui (/console) and ADMIN mode problems

Similar Messages

Maybe you are looking for