Very slow and erratic wifi connection

My wifi connection is very erratic. Often when I am working online, my internet connection will suddenly be lost. When I look at my Task Manager, the Performance graph shows no activity and lists my connection speed at 0 Kbps. I often have to disconnect and reconnect, which sometimes brings it back, but not often. When my connection comes back, the Performance graph shows wild spikes. My laptop is the only computer working on wifi, and the router is not far from the laptop. I am also disappointed in my internet speed, even when working with a wired connection. It seems to be faster on weekdays, slower on weekends, and super slow in the evenings. Before I had Comcast, I had Verizon, and I never had any issues with wifi. Comcast was supposed to greatly improve my connection speed, but instead it has greatly diminished my internet speed and offers a terrible, erratic, and often nonexistent wifi connection.

Thank you so much for your reply. Funny...Comcast never mentioned anything about speed depending on neighborhood density when they were luring me away from Verizon with promises of greatly improved internet speed. I now wish I had never left Verizon. I should have believed my friends when they told me how awful Comcast was. Thanks again for your reply.

Similar Messages

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

  • Wifi connection very slow and interrupted after several minutes

    My wifi connection is interrupted after several minutes. I can restart the connection with wifi assisted, diagnose tool. It indicates always ISP failure. When I go through the assistant, it sows that the network connection was changed, and the wifi connection is back. But only for some minutes, then I have to go the the assistant again, and again and again. Also the wifi protocoll tool did not help me.
    Meantime I don't have any problems with my IPad or Iphone.
    In the web I found plenty of other users with MacBook Pro (Retina) OS X Yosemite, Version 10.10.2 with similar problems. When will apple fix this bug?
    Do somebody has in idea how to fix it?
    Thanks for your support!
    Bird

    You posted in the support forum for the Apple routers......AirPort Express, Airport Extreme and Time Capsule.....the products pictured below:
    But, your post seems to describe a connection issue that you are experiencing with your MacBook Pro.  We are not sure how an Apple router might be involved here if your other devices are connecting well.
    You will likely receive a much faster and more informed response if you post your question in the support area for the MacBook Pro linked just below:
    MacBook Pro

  • My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

    My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
    The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
    Is anyone facing similar issues, Please advice

    My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
    The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
    Is anyone facing similar issues, Please advice

  • Internet connection very slow and cannot download IOS 5as its takes 6 hours and then apple has timed me out .  Can any one help?

    Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out .  Can anyone help

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • IMAP commands are very slow and end up having the connection terminated by the server

    Could you please help us on this topic ?
    https://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/imap-commands-are-very-slow-and-end-up-having-the/652390ea-9658-4db6-ae2c-c8fff12a9142

    Hi,
    Sorry that I am not familiar with Outlook.com account and its server connection. This forum focuses on user clients issue when connect to Exchange server 2013 which is generally an on-premises mail server in domain environment.
    Since your issue is related to Outlook.com account, I suggest we can also ask a question in Microsoft Outlook.com forum for more help:
    http://answers.microsoft.com/en-us/outlook_com/forum?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1418613687794
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thank you for your understanding.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I have just returned from a business trip to China and my Macbook is not well. My internet connection is very slow and drops out intermittently. Is there a utility I can run which might clean it up.

    I have just returned from a business trip to China and my Macbook is not well. My internet connection is very slow and drops out intermittently. Is there a utility I can run which might clean it up.

    Hello,
    I have very similar problem. Suddenly Firefox stopped work - It was working few days after ver. 4 update. I was looking everywhere for some solution but nothing worked.
    - uninstalled firewall - did not worked
    - added full exception for Firefox into the firewall - did not worked
    - Firefox reinstall - did not worked
    - Firefox complete reinstall (registry included) - did not worked
    - IPv6 diseabling - did not worked
    - diferent proxy options (no proxy, system proxy, autodetect proxy) - did not worked
    - new firefox profile - did not worked
    - complete coockies, history... deleted - did not worked
    - there is only one solution which partly works - I have used public proxy addresses for Firefox but the ping is (750ms), down/up (0.8MB/0.2MB originaly (10MB/2MB) and yes I have tried different proxy server from different countries from my included.
    - IE is working perfectly and without proxy
    - other companies browser - did not worked too
    - only IE is working
    - I have used three different malware, trojans, spyware, anti-virus programs and nothing
    It seems to me as hopeless situation or very clever move from Microsoft, I am forced to use IE - at least this works
    Any ideas, solutions?
    System Windows 7, firewall Comodo Internet security
    Thanks everyone for the help

  • Why are first connections slow and subsequent ones very slow or won't connect?

    Since upgrading initial connections are often slow and subsequent connections very slow or won't connect. I have had to revert to Internet explorer which works fine!

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    You can try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a more modest setting like 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  • Why is my imac so slow especially with wifi connection

    In order to recover wifi I have to restart machine and/or switch wifi off and on. Opening pages is very slow and am constantly waiting for a stammering crash.

    It's likely the slow running and flaky wifi are two separate issues.
    For the slow running, and just to rule out some known causes, are you running any anti-virus program - Norton, MacKeeper, Kaspersky, etc?
    For the wifi issue here are some suggestions - wifi issues seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

  • The internet very very slow and drop in my brand new Mac pro OS X 10.8.3 any help!

    I bought new Mac pro with Retina display (OS X 10.8.3) , I am suing Wifi and  the Internet very slow and drop most of the  time compare to my other Mac  OS X10.7.4! any advice. Thank you

    Pete
    If multiple people are seeing the same problems after making the same changes it is hard to believe that each problem is fundamentally different. To say that a change is specific to a single configuration implies that every computer and every operating system installation are different. This is not rational. Treating each problem individually fixes one problem. Finding the root cause fixes all the problems. I am familiar with finding root cause of communication systems - in particular mission critical spacecraft command and telemetry links. That experience teaches me to break the problem into pieces. My troubleshooting indicates a very high packet loss between my computer and my wireless router. In the exact same configuration with with two other devices i see negligible packet losses. i can go outside my home network and see the same ping and traceroute evidence in comparing the devices. That rules out my ISP, my email provider and pretty much isolates the problem to the router Mac link. Is this thinking flawed? Can you suggest additional tests I can run to further isolate the dropped packet problem? Further, no hardware has changed in my configuration. The only change is the upgrade to 10.8.3.
    In posting to other threads I am trying to find if there is evidence of the same problem and to determine if there is any other way to gather evidence, and perhaps suggest ideas that folks might double check their fixes. In doing so you aggregate the problem and not decimate it. The problem in this thread may not be solved if a packet loss is still present. I am seeing packet losses as high as 60%; an iPad at the same location is seeing less than 0.1%. The network connection will work with high packet losses. You know that is what TCP/IP does but why accept 20%, 10% or 5% packet loss if you know it should be much less than 1%. The problem can only be determined if it is tested.
    I have created my own thread - I linked to it.
    If you prefer to not allow comments on closed threads I would suggest closing the threads to editing. In the future I will link from my thread to the solved one however if my thread finds a better solution there will be no way of pointing from the closed thread to a better solution.
    My apologies for attempting to perform a methodical root cause analysis.
    Mike

  • Very slow printing over WiFi

    Hi everyone!
    One of my clients has uses a 4th generation Apple AirPort Extreme. It's a small network with only 3 to 5 users.
    All users connect via Ethernet cable, but one individual recently moved her iMac 21 to a spot in the office that doesn't have a wired network connection. Although she's able to work fine via a wireless connection in almost every respect, printing to their Canon ir C3080 copier is painfully slow over wireless. It doesn't matter what she tries to print - even a small text file takes up to five minutes to print. When I move and connect her iMac to the network via Ethernet, the printing problem disappears.
    I then tested the other computers in the office and my computer for this problem and found that they all printed very slowly over the WiFi connection.
    Their AirPort base station is up-to-date with the most current firmware, and all the computers are running the most updated versions of Snow Leopard. I'm running Lion on my computer, by the way.
    Does anyone have any idea what might be causing this problem? I don't have another printer I can test in this office, but I think that may be the next thing I have to do.
    Any advice/suggestions would be greatly appreciated!
    Thanks in advance!

    iMac (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

  • HT1976 Hello my is working very slow and iCloud is asking me a code that has send to me I write down the and he said code error?help me fix it thank you

    Hello iPhone is working very slow and the code error and also iTunes very slow!!pls fix it .thank you

    To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
    The first step in addressing the black screen is an SMC reset.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Excerpt from
    http://support.apple.com/kb/ht39

  • Netflix /youtube is very slow and jerky

    My macbook pro is a 2.43 GHz intel Core duo with 4GB of memory.  I updated to Maverics and Netfix and youtube became very slow and jerky.
    Even moving the mouse causes probles with playback.
    This does not happen my wifes mac book pro, or my small windows laptop and it did not happen untill I updated to maverics.
    Any suggestions?
    Thanks

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Internet too slow and erratic to update software

    I have had an iMac G5 at home for about one year. The problem is my internet connection (DSL) is too slow and erratic to download files bigger than 10 mb. Can I get software updates on a CD? Or is there another way to get those downloaded files? Zipped, maybe?

    Hi & a warm welcome to the forums!
    Quite often getting them direct is far better than SU, this works on my Dialup asccount most times...
    http://www.apple.com/support/downloads/

  • Remote Desktop to netbook very slow and laggy

    Remote Desktop to netbook over local ethernet is very slow and laggy. Netbook is Atom N280 with 2GB RAM and GPU with WDDM 1.0 driver. On Windows 7 all works fine even with an Aero Glass enabled for remote session. Now DWM consumes 10 to 25% permanently
    so I think it's a DWM problem. Network traffic is only up to 6Mb/s over 100Mbit LAN connection. Is there a way to connect to Windows 8 netbook useful way?

    Hi, sorry for my late reply but I didn't get notification about your post. I tried these settings and it is laggy same way. I read on Internet desktop composition in Windows 8 is always enabled regardless of RDP client settings. Display adapter is Mobile
    Intel 946 Express Chipset Family. I tried to install Standard VGA driver, but it is also very slow. I'll try clean install to VHD now to avoid any 3rd party software impact.
    Edit: I tried and it's slow even after a clean install.
    Edit2: It is an Intel 945 Express Chipset Family.

Maybe you are looking for

  • Help with simple XPath query in OSB

    Hi! I'm trying to extract part of XML message with Oracle Service Bus using XPath but I can't find the way to get it done For testing purposes I initialize a "test" variable with an assignation action with following content: <Countries><Country><COUN

  • Adding a *Not* Null Entry to a Data-Bound Drop Down List

    How do I add a not null entry to a data-bound drop down list? I am supposed to have something like this: <html:select property="Korisnik1" > <html:option value="0000">      (Not null value) </html:option> <html:option value="-1"> (Null value) </html:

  • Internet Explorer Message Box ignored by e-Tester

    Hi all, On a webpage we have the following link with a javascript: "a href="javascript:if(confirmDeleteCheckboxes(document.listForm, 'action_balance[', 'delete', 'Do you really want to delete the selected balance(s)? All data will be lost!'))document

  • Sony MDR-EX90LP Earbud Stereo Bass - What is the newest equivalent model?

    What is the most recent Sony Earbud model that is closest to the Sony MDR-EX90LP Earbud Stereo Bass Earphones? Solved! Go to Solution.

  • How to turn off the Monitor???

    Hey friends! Is it possible to turn the Monitor (Display Device) ON and OFF from a java application??? Thanks a lot! Ricardo