Very slow applets on Safari 5 and 1.6.20 - works fine in Firefox
Hello,
Has anyone else noticed very slow applets in safari 5? I'm running 1.6.0_20 and trying run any of the applets at http://openprocessing.org results in VERY slow applet performance.
If i load the same applets in Firefox things run smoothly.
For example, load this one in both and see the difference:
http://openprocessing.org/visuals/?visualID=9151
The motion in Safari 5 is jerky and not fluid at all. But in firefox it runs nice and smooth. Even in Chrome it's jerky just like Safari.
I've tried both the 32/64 bit version settings and still the same result in Safari.
Thanks..
HI,
Open Java Preferences (Applications/Utilities) Select the Network tab
Click: Delete files
Relaunch Safari.
And empty the Safari cache from the Safari menu.
Could be the site itself. An HTML validator came up with errors.
http://validator.w3.org/check?uri=http%3A%2F%2Fopenprocessing.org%2Fvisuals%2F%3 FvisualID%3D9151&charset=%28detect+automatically%29&doctype=Inline&group=0
Carolyn
Similar Messages
-
OS X 10.5.8 Running VERY slow since installing Safari and itunes updates.
Installed latest Safari and itunes updates today. When my OS restarted the install took a really long time and since then the computer is so slow its un-usable. Its a Macbook Pro, 2.6 intel dual thingy (the model just before the uni-bodies came out).
I have down the PRAM reset and tried launching in safe mode. Neither or these made any difference.
I then started with an install disk installed and while holding down C. Again, it took a long time to boot, but once in that mode I launch the various utilities etc. So I opened disk utility and verify and repair disk...but it found no problems.
Perhaps I should have repaired disk permissions?
Also I thought this might be a lose ram issue or something. I don't have a screw driver to open up RAM slot and re-seat it, but also in 'about this mac' it can see the ram...?
I am very frustrated right now! What have i done to my computer?!
It was running 100% fine until I did this software update.
...and when I say it is running slow, to give an example clicking Apple/N in finder takes maybe 5 for that window to appear followed by another few minutes of the whirling wheel of death. Then I can click on the next item (apps for instance) and go through a similar wait.
argh!No very clear idea of why it is behaving like that Samuel, but in 95% of cases it is some third party add-on, not yet updated for Safari 5, that is the cause.
Please peruse the following, particularly with respect to Open DNS settings:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
Kindly repy for the above from Apple Experts......
Thanking you in advance...are you signed in to those stores? do you have them restricted in settings, restrictions?
-
I amexperiencing a very slow log in's and speed to my desktop is very slow also. What is the cleanup I have to do to make this faster
How large is your hard drive and how much hard drive space do you have left?
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac.
Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it.
If browser remains sluggish, empty its cache.
Safari/Empty Cache
Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. Which model Macbook Pro are you using? -
Firefox 12 is very slow to load pages and if two tabs are opening it lags.
Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.
I have the exact same problem.
Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
Something is wrong with Firefox 12, it shouldn't be this slow.
How is that each version is progressively worse than the one before it?.
Stop releasing so many versions Mozilla, release one that works and build from there. -
After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.
Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4 -
My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help! What could it be?
It is very possible that you may have some form of Wi-Fi interference nearby that is preventing your AEBSn from providing a clean RF signal on the 2.4 GHz band.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. -
My Macbook is becoming very slow on start up and operation
My Macbook is becoming very slow on start up and operation. I have tried Mac Keeper but my small 2GB ram is always gone in the simplest of operations.
Any help would be usefullHello Chris,
A variety of things could be causing the slow startup. The first place I would look is at the Login items on your MacBook to see if there are items in this list that are set to automatically start. Having applications automatically start will increase startup time. This article has the steps to do this:
Mac OS X 10.6: If items automatically open when you log in
http://support.apple.com/kb/PH6811
The steps from the article should work for Mac OS X 10.4-10.8; the only difference in Mac OS X 10.7 and 10.8 is that the Accounts icon is named Users & Groups:
To permanently prevent items from opening at login:
Choose Apple menu > System Preferences, and then click Accounts.
Click Login Items.
Select any items you don’t want to open automatically, and then click the "-" button.
If you are still experiencing a slow startup after that, you might want to try the steps in the following article:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps!
Best,
Sheila M. -
Very slow processing on LSMW and IFS access
Hi all,
we have a very slow processing on LSMW and IFS access. I believe it was slow all the time in the past. This LSMW transaction only converts some data, which are stored in a flat file in the IFS and stores it again into a flat file in the IFS. It is reading the data from IFS and writing again the data into the IFS.
IFS is not fast, I know. But do you have an similar experiences with such LOAD ?!
R/3 Enterprise 4.70 shows with transaction SM50 the following lon running job:
4 BGD 65988 waiting Yes
5 BGD 65989 waiting Yes
6 DIA 85421 running Yes 1 SAPLTHFB 100 USER1
7 DIA 65993 running Yes 11500 /1CADMC/SA 100 USER2
8 DIA 65994 waiting Yes
9 DIA 65995 waiting Yes
The WRKACTJOB Display shows:
This means for me the job is not doing so much with the database. Only 439 I/O's in 21 minutes. This is nothing. I have tried to give to this job Priority 19, but this is not the reason, the job is not going faster.
Work with Active Jobs
02.07.08 1
CPU %: 89,0 Elapsed time: 00:21:25 Active jobs: 895
Subsystem/Job Type Pool Pty CPU Int Rsp AuxIO CPU %
WP06 BCI 2 20 395,2 136 0,0
WP07 BCI 2 19 10274,0 439 12,7
WP08 BCI 2 20 1156,0 8 0,0
WP09 BCI 2 20 874,3 6 0,0
The WRKSYSSTS Display shows: This means for me, the is no memory lack.
Sys Pool Reserved Max ----DB----- --Non-DB--- Act- Wait- Act-
Pool Size M Size M Act Fault Pages Fault Pages Wait Inel Inel
1 5000,00 1448,43 +++++ 0,0 0,0 0,4 0,5 94,9 0,0 0,0
2 60340,00 44,65 3500 51,6 6335 113,4 364,1 7887 0,0 0,0
3 128,00 0,00 10 0,0 1,3 0,2 0,8 17,2 0,0 0,0
The WRKDSKSTS Display shows no problem in DASD.
I/O Request Read Write Read Write %
Rqs Size (K) Rqs Rqs (K) (K) Busy
11,5 12,4 3,0 8,4 13,2 12,1 2
13,2 10,2 1,5 11,6 7,0 10,6 1
10,6 8,8 3,5 7,0 8,2 9,2 2
13,8 12,4 4,2 9,5 10,1 13,5 2
8,3 71,3 7,5 0,8 78,4 7,4 5
17,7 123,6 17,5 0,2 125,2 4,0 9
27,0 83,1 25,7 1,3 87,1 4,3 10
26,9 95,0 25,6 1,3 99,6 5,8 9
16,9 115,4 16,2 0,7 120,3 4,0 8
37,3 116,7 37,0 0,2 117,3 18,0 13
21,4 94,0 20,3 1,0 98,6 6,2 7
12,7 72,8 11,5 1,1 77,6 26,8 6
13,5 85,1 12,3 1,1 92,0 12,8 5
Any idea, here ???
best regrads,
Carsten Schulz
Teamleader SAP-Basis, ebmpapst Mulfingen, GemanyHi together,
thanks for answering so fast.
The jobs read from the sysbas-IFS /usr/sap/a/b/ and writes to /usr/sap/SID/DVEBMGS00/work/ also in the sysbas-IFS.This IFS is not remote. Not through the QfileSrv.400 mechanism.
And yes, we have a HA solution. We have two IASP's on two different iSeries and are using XSM to mirror the data.
I have tried to increase the speed by switching off the XSM mirroring, but the speed does not increase. Sorry.
best regards,
Carsten Schulz -
Safari and mail is not working on my new iPad with iOS 5.1.1, tried every trick in the book but to no avail. Please suggest in case I want to update my ios5.1.1 as I fear that it might have corrupted somehow, what's the way to do it. I don't want to upgrade to higher iOS versions. Thanks
Close Safari and Mail app on the Task Bar and re-launch.
1. Double-click the Home button to reveal Task Bar
2. Hold Safari and Mail app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen -
What to do if the screen is stuck on the draft screen? I was writing a mail, saved it as draft, then later, was able to send it. However, the screen did not revert to the inbox page. The draft page seems to be hung or stucked. Safari and all others are working ok though.
I sent the draft to myself several times. That did not seem to be working, but when I opened Mail this morning, it has been sent all of the times and the Mail screen is no longer frozen.
-
Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?
Might be an incompatible extension or plugin ...
Try troubleshooting Safari extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
University network only SAFARI and App Store is working other apps are not
In the University network..university of Adelaide australia..network(eduroam)
after i setup the proxy in the Wifi connections..only safari and App store is working..MAIL,MAPS,WEATHER, Youtube or any other internet access apps such as instant messengers are not working...
there is nothin wrong with the device because @ free wifi hotspots evrything works fine..
PLEASE TELL A SOLUTION FOR THISIf I understand you correctly, the iPod Touch is working fine at wi-fi spots except for your university. If some apps work there, but others do not, I would suspect that some ports are being blocked. I know that at my local mall, I can access the web via browser, but they have blocked the email ports, so I can't use the mail client.
I find it hard, though, to believe that the university would block the email port(s), but I would suggest that you talk to the IT department there to see if that is the case. -
So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ? -
Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)
Error message?
Maybe you are looking for
-
hi all, i am trying to use a Macro in the standard User exit MV45AFZA,MV45ATZZ. i am writing following code but it gives the error for the below code. ***INCLUDE MV45ATZZ . This include is reserved for user modifications *
-
Hi Experts I havea major issue. I guess this is technical and hope to get your help I need to know how I can get rid of an asset that I am disposing of when the asset was not loaded in a sub-ledger ???? Please advice ASAP with T codes and se up? Win
-
Copying multiple contract's data to sales orders via BAPI.
Hello Experts, We have a requirement to copy contract data into the sales order, reference multiple contracts and copy all data from referenced contract to the SO.The scenario is that a seperate contract is being refrenced at the header level and dif
-
ArcGIS Text: what determines single line vs. single letter?
Hello! Please see the attached and notice that some text is presented as individual letters, and other text is presented as a single line (I have selected the text so you can see the vertices). Clipping mask is released, everything is ungrouped. The
-
Monk episodes not listed in correct season
Hello, I have purchased about 10 episodes of Monk from iTMS, several from each season. I noticed that they are listed in the the correct seasons in my iTunes Library; however, in the Video section only some of them have a "Season" reference under the