Very Slow Browing after Re-Install. Please Help!
I just re-installed os x because I wanted to clear up some space on the HD. After I re-installed downloads and browsing slowed down. Some downloads only go up to 6 kb/s and web pages take a long time to load. What can I do to fix this problem?
I had the same problem once. It was cured after I deleted the airport profile in the network system preference. I don't have the macbook right now and I don't have airport on this desktop so I can't see what everything is called. I do know I opened network preferences, then to airport, and delete something there, restarted and then reconfigured for auto connect to my wirless network. It worked. sorry I can't give the correct technical terms...
Similar Messages
-
SLOW and SLUGGISH after clean install PLEASE HELP!
My Macbook Pro started acting slugggish a few nights ago, and it seemed after a reboot that it ran better, but quickly slowed down. I ran permissions, disk repair, reset the PRAM the SMC and etc... nothing helped. I tried to do a Time Machine restore and after 10 hours of SLOW restoration (it still had 70 hours left) i decided to do a CLEAN INSTAL of Yosemite 10.10.
Same thing, takes over 10 minutes to boot up and i click on something and the beach ball will spin for a minute.
Disk Utility says everything is OK.... but even the internet is sluggish as if the entire machine is not processing the information fast enough.
ANY HELP is greatly appreciated as this is on day 4.
Thanks
SteveCLEAN INSTALL took over 8 hours to complete, as if everything is running in slow mode.
Also, i ran this app as i see most ask for it.
Problem description:
Clean Install - OS very sluggish and slow before and after clean install
EtreCheck version: 2.1.6 (109)
Report generated January 17, 2015 at 7:29:07 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 550
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 10:53:5
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Mac (disk1) / : 748.93 GB (735.15 GB free)
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
0% mds_stores
0% mds
0% Finder
0% launchd
Top Processes by Memory: ℹ️
258 MB com.apple.WebKit.WebContent
155 MB loginwindow
129 MB mds_stores
120 MB Finder
69 MB WindowServer
Virtual Memory Information: ℹ️
3.55 GB Free RAM
2.71 GB Active RAM
1.37 GB Inactive RAM
961 MB Wired RAM
2.65 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 16, 2015, 08:36:59 PM Self test - passed -
T61p Very Slow Internet, Wireless Intel Card, Please Help!
I have a brand new t61p. it has 4 gb ram 2.5ghz processor and i have windows xp pro which i downgraded from vista too. I have the intel wifi link 4965 agn. My router is a linksys 2.4ghz 802.11b. I know that this is outdated but, i have 3 other computers. 2 Pc's one wireless and the other hardwire. i also have one other old dell laptop with a wireless card that only supports 802.11b. I go to speakeasy.net and i have ran the speed test on all 4 computers. the average for the 3 computers(not the t61p) is 2800kpbs. i should supposbly have 3000kbps according to verizion but that doesnt matter. Anyways when i run the lenovo on the speakeasy website the highest download rate i got was 1000kbps. genrelly its around 700kbps. I have made sure all computers have Excellent signal 100%. I noticed the laptop was slow using the internet on downloads and even web browsing and its a fairly big difference from the others. I feel like something is restricting my t61p. Please please please help me! if you need anymore info i will get it.
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you.
Message Edited by andyP on 07-16-2008 10:02 PMI have a brand new t61p. it has 4 gb ram 2.5ghz processor and i have windows xp pro which i downgraded from vista too. I have the intel wifi link 4965 agn. My router is a linksys 2.4ghz 802.11b. I know that this is outdated but, i have 3 other computers. 2 Pc's one wireless and the other hardwire. i also have one other old dell laptop with a wireless card that only supports 802.11b. I go to speakeasy.net and i have ran the speed test on all 4 computers. the average for the 3 computers(not the t61p) is 2800kpbs. i should supposbly have 3000kbps according to verizion but that doesnt matter. Anyways when i run the lenovo on the speakeasy website the highest download rate i got was 1000kbps. genrelly its around 700kbps. I have made sure all computers have Excellent signal 100%. I noticed the laptop was slow using the internet on downloads and even web browsing and its a fairly big difference from the others. I feel like something is restricting my t61p. Please please please help me! if you need anymore info i will get it.
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you.
Message Edited by andyP on 07-16-2008 10:02 PM -
helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.
Next try the remaining items of:
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Very slow Safari after IOS8 Iphone 5S
Hello all
I live in Iraq, so basically internet here is very slow, however after installing IOS 8, Safari now is very very slow
I tried other browsers and they were a better
any one of you guys have similar issue ?My iPad and iMac are really screaming after the update. My iPhone 4 is running more slowly. What's odd is that even with it right next to the AEBS it's running slow. The iPhone 4 is listed as 802.11 b/g/n in Airport Utility in the Advanced/Wireless Clients window. When it was running slow, the signal level was OK (actually good-about the same level as the iMac) but the noise was high so the signal to noise ratio was only between 12 and 20 dB. Also the rate was at 5 and staying there 9 (not sure what the rate number is but it was much smaller than all the others clients).
I turned WiFi OFF on the phone then back on again. When it came back, the signal to noise ratio was better (went to about 30-40 dB, and the rate went up to 58. Then after a few minutes, the signal to noise ratio went back to about 20 and the rate number dropped to 5 again.
I'm not sure what this all telling me exactly, but I agree the iPhone seems a bit slower. It's running quite a bit below my 60 day average for download and uplaod speeds - especially a ways away from the AEBS (new 5th gen). The other devices (iMac and iPad are performing as good and even a little better than their 60 day averages. -
I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookies, Data and History
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I did not find facetime in iphone5. How to install please help me to install facetime
I did not find facetime in iphone5. How to install please help me to install facetime
What country did you buy the phone in?
What iOS version does it have?
As has been said, Facetime is banned in some coutnries and so is not available on iPhones and cannot be insatlled.
Also, before iOS7, the iPhone had no Facetime icon, it was built into the Contacts App. -
Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I had my ipod this week, so I do not know which applications to install. please help me
I had my ipod this week, so I do not know which applications to install please help me thank you in advance
You can buy any apps that you want.
-
I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.
Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
Very strange behaviour master-detail-detail please help
Very strange behaviour master-detail-detail please help
Hello,
I have a parent-child-grandchild report which show's some really strange behaviour.
The data template has 3 queries Q1, Q2 and Q3.
Q2 is bound to Q1 using a bind variable
Q3 is bound to Q2 using another bind variable
For a certain record in Q1 the output should be
2 records in Q2
and 1 record in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q2 record B
Q3 record BC
The results conforms to the expected output.
For another record in Q1 the output should be
2 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record AB
For another record in Q1 the output should be
5 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record EI
Q3 record EJ
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record DH
So for the last record of Q2 I don't get the appropriate records from Q3 when there are multiple records to be shown, but only the last record which belongs to the previous Q2
What is going on?
Please help me out...
Kind regards,
Jan-MarcelHi Tim,
Thanks for your reply. Below you will find the datatemplate on the scott/tiger schema.
Please help me out.
Kind regards,
Jan-Marcel
<dataTemplate name="scott" description="Template scott" dataSourceRef="otcy001" version="1.1">
<parameters>
<parameter name="p_deptno" dataType="number"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
select empno mgr_empno
, ename mgr_name
, job mgr_job
, hiredate mgr_hiredate
, sal mgr_sal
, comm mgr_comm
from emp
where deptno = nvl(:p_deptno, deptno)
and mgr is null
]]>
</sqlStatement>
<sqlStatement name="Q2">
<![CDATA[
select empno mgr2_empno
, ename mgr2_name
, job mgr2_job
, hiredate mgr2_hiredate
, sal mgr2_sal
, comm mgr2_comm
, mgr mgr2_mgr
from emp
where mgr = :mgr_empno
]]>
</sqlStatement>
<sqlStatement name="Q3">
<![CDATA[
select empno emp_no
, ename emp_name
, job emp_job
, hiredate emp_hiredate
, sal emp_sal
, comm emp_comm
, mgr emp_mgr
from emp
where mgr = :mgr2_empno
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_mgr1" source="Q1">
<element name="q1_mgr_empno" value="mgr_empno"/>
<element name="q1_mgr_name" value="mgr_name"/>
<element name="q1_mgr_job" value="mgr_job"/>
<element name="q1_mgr_hiredate" value="mgr_hiredate"/>
<element name="q1_mgr_sal" value="mgr_sal"/>
<element name="q1_mgr_comm" value="mgr_comm"/>
<group name="G_mgr2" source="Q2">
<element name="q2_mgr_empno" value="mgr2_empno"/>
<element name="q2_mgr_name" value="mgr2_name"/>
<element name="q2_mgr_job" value="mgr2_job"/>
<element name="q2_mgr_hiredate" value="mgr2_hiredate"/>
<element name="q2_mgr_sal" value="mgr2_sal"/>
<element name="q2_mgr_comm" value="mgr2_comm"/>
<element name="q2_mgr2_mgr" value="mgr2_mgr"/>
<group name="G_emp" source="Q3">
<element name="q3_emp_empno" value="emp_empno"/>
<element name="q3_emp_name" value="emp_name"/>
<element name="q3_emp_job" value="emp_job"/>
<element name="q3_emp_hiredate" value="emp_hiredate"/>
<element name="q3_emp_sal" value="emp_sal"/>
<element name="q3_emp_comm" value="emp_comm"/>
<element name="q3_emp_mgr" value="emp_mgr"/>
</group>
</group>
</group>
</dataStructure>
</dataTemplate> -
Mid-2010 27" iMac very slow, even after clean OS install - HELP!
Good afternoon guys, I'm hoping someone can offer me some advice.
I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
Thanks in advance,
ColJust suggesting things right off the bat here-
To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
Or try running Apple Hardware Test a few times back to see if it is a hardware error.
As for the iLife apps they should've come on one of the install discs that shipped with your mac.
If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
See here:Computers that can be upgraded to use OS X Internet Recovery
Good Luck! -
I purchase my Mac approx 6 years, recently purchase Mac OS X Snow Leopard disk for my daughters new IPOD to work, computer is extremely slow, others refuse to use it, why is it slow, I know very little about this computer and have hated it from day one! Please help. The most I have on this computer would be photos, never downloaded movies, and have approx 40 songs.
The best option to make it faster would be to manually go through and erase all of the junk (files you never use) from the computer. If you want a much faster way (depending on how many files you have, this can take much longer), you can copy the files you'd like to keep to an external HD and then erase and reinstall OS X.
Erase and Reinstall OS X using the OS X Install DVD
Note: This will delete all data on the disk. Back up important files before continuing.
Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
Insert your OS X Install DVD into the computer's built-in disc drive (if applicable) or your computer's external USB disc drive.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Mac OS X Install DVD to boot from the Mac OS X Install DVD.
Select Disk Utility and then choose Continue.
Select your startup disk (Macintosh HD by default) from the left.
Select the Erase tab.
Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X and then choose Continue.
Follow the instructions.
I hope I helped.
Maybe you are looking for
-
Hi Gurus, We are on CRM 4.0. We have a requirement where whenever a customer changes his personal details in ISA (B2C scenario), an activity should be generated. Can anyone help me with some workaround/ BAdI, to achieve this scenario? Reward is gaura
-
Adobe Reader users are occasionaly presented with Standard when published via Citrix XenApp 5.0
We are publishing Adobe Standard to 4 users over 6 servers and have both Acrobat Standard and Reader installed on each Citrix server. During installation of Standard, Reader was selected as the default application. Regardless of this configuration,
-
Sending videos through whatsapp in nokia lumia 520
hey so i been using whatsapp in my nokia lumia 520., i can recieve videos from friends and even forward the videos to others also. But what i can't seem to do is send other videos that are there in my memory card/internal memory to other users thru
-
Acrobat Update 8.2.3, Illustrator CS2 won't launch.
Updater updated Acrobat to 8.2.3 this morning, now Illustrator CS2 won't launch. Illustrator crashes during launch - seems to get past initializing plug-ins then.....
-
Need to access a parameter in a super class method
Hi, I have the following setup: class A{ exceptionHandler(Throwable ex, int iNeedThis); class B extends A{ execute(); func1{}; }When execute() fails, the ecexptionHandler method is automatically called. In func1() of class B I need to acc