Very slow Charge time for xperia z2

i noticed that charging time for z2 is very slow !! anybody has the same ? any suggestions? i am using the original cable which comes out of the box .    

Hi, this could be because it is a new phone/battery......if mine is sitting at say 15% it does take a good few hours to get up to 100%..... Do you leave the phone switched on during charging...if so check what apps etc are using the most power....top of the list should be your screen but look for abnormally high usage from an app etc Hope this helps

Similar Messages

  • Very slow turnaround time for development

              Is there any way to speed up the turnaround time for developing J2EE applications
              with pageflows? I make a minor change in my JSP or my JPF and the time it takes
              to build and run again is pretty bad. Don't you guys do any incremental compilation?
              

              Change in JPF will take time. but in JSP, it's ok.
              "Gerald Nunn" <[email protected]> wrote:
              >"Jim Thomas" <[email protected]> wrote in message news:40b68668$1@mktnews1...
              >> Is there any way to speed up the turnaround time for developing J2EE
              >applications
              >> with pageflows? I make a minor change in my JSP or my JPF and the time
              >it
              >takes
              >> to build and run again is pretty bad. Don't you guys do any incremental
              >compilation?
              >
              >JSPs and JPFs are automatically re-compiled for you when the server is
              >in
              >development mode, no need to do a manual build after changing them.
              >
              >Gerald
              >
              >
              

  • Very Slow Load Times for PDF Document

    Hi,
    I have a PDF document that takes forever to load in preview (on the order of a minute or more). It is eight pages, but when I try to go to the last two pages, each of which has a drawing created by using Autoshapes in Microsoft Word, again they take a minute or more to load.
    The document looks to have been created by Acrobat 6 for Windows from a MS Word document. Adobe Reader 7.0.7 on another machine loads the document correctly and speedily (well, as speedily as Adobe Reader can...).
    Are there known problems with this type of graphics, MS Word drawings, in a PDF document? Is there any way I can make the document load faster?
    Thanks,
    Jeff Corbets

    Hi there
    I have a tutorial on this process available at the link below:
    Click here to view
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • M9 Very Slow Charging Even With Quick Charge 2.0 Chargers

    I have a continuing problem with very slow charging even with Quick Charge 2.0 chargers. For example last night I had the M9 plugged into a fast charger for over 12 hrs and it went from 5% battery to 87%.   I checked  the Settings - Battery usage history - and it displays "NO APPLICATIONS FOUND" - very strange...
    Something is very wrong. I have multiple 2 amp and quick chargers all with poor charging times. I have tried each of these:
    https://www.amazon.com/gp/product/B00FW1GE9S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1[/
    https://www.amazon.com/gp/product/B00L40YJ8O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1[/
    https://www.amazon.com/gp/product/B00TAOEKPS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1[/
    https://www.amazon.com/gp/product/B00HP0FOCM/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1[/
    The Ampere app displays varying charger power from 15 mA to 880 mA so I don't think it is accurate.
    Testing with multiple chargers point to the problem in the M9. This is maddening. Seriously considering returning the M9.
    Any feedback?
    ++md++

    Perhaps this helps:
    http://www.xperiablog.net/2015/07/02/these-sony-xperia-devices-support-qualcomm-quick-charge-2-0/

  • I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen.

    I have an Iphone 4 with IOS 6 and my emails have disappeared.  I also have a very slow reaction time to my touch screen. Help!

    Hello there, parihargs1.
    To troubleshoot display brightness issues the following article provides 2 key steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Of note is the following:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Display does not adjust brightness automatically
    The ambient light sensor brightens the display when using the iPhone in brightly lit environments, and dims the display in low light. To test this sensor, do the following:
    If the iPhone is in a protective case, remove it from the case. If there is a protective film on the display, remove the film.
    Verify that the Auto-Brightness setting (Settings > Brightness and Wallpaper) is set to ON, and that the Brightness level is set near the middle of the slider.
    Press the Home button to return to the Home screen and then press the Sleep/Wake button to lock the iPhone.
    In a bright environment, cover the top third of the iPhone to block the light, then press the Sleep/Wake button or the Home button to wake the phone. Slide the slider to unlock the phone.
    Notice the brightness of the screen and application icons; they should be somewhat dimmed.
    Remove the cover from the top of the display and in a few moments the display should get brighter.
    If these steps do not resolve your issue please refer to the "Issue not resolved" section for your next step.
    Thansk for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How can I determine if my iMac is infected with Malware.  Internet is very slow at times.

    Some time ago I opened a link in an email from a friend and later found out that his email address had been hijacked.  The site the link took me to seemed innocuous, but ever since it seems that from time to time that my internet connection is very slow, as if there is not enough band width.  Is it possible that my computer is infected with some sort of malware?  How can I determine that?  If it is infected how can the malware be removed?

    Here is the report.
    Problem description:
    I clicked on a link in a email from a hacked email account and since then my internet connection runs very slow at times.  I am concerned that my iMac may be infected with some sort of Malware
    EtreCheck version: 2.1.6 (109)
    Report generated January 21, 2015 at 12:26:10 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (21.5-inch, Late 2009) (Technical Specifications)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2-core
      12 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 1:8:36
    Disk Information: ℹ️
      WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (398.65 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      PIONEER DVD-RW  DVRTS09 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.symantec.kext.SymAPComm (12.7.1f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.filesecurity (12.7f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.fw (5.3.1f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.internetSecurity (5.4f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.ips (3.9.2f1 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.pf (5.7.1f4 - SDK 10.8) [Support]
      /System/Library/Extensions
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) [Support]
    Launch Agents: ℹ️
      [running] com.brother.LOGINserver.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.symantec.errorreporter-periodicagent.plist [Support]
      [loaded] com.symantec.nis.application.plist [Support]
      [running] com.symantec.uiagent.application.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.fitbit.galileod.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [running] com.sec.faxdb.plist [Support]
      [running] com.symantec.deepsight-extractor.plist [Support]
      [loaded] com.symantec.errorreporter-periodic.plist [Support]
      [loaded] com.symantec.liveupdate.daemon.ondemand.plist [Support]
      [loaded] com.symantec.liveupdate.daemon.plist [Support]
      [invalid?] com.symantec.MissedTasks.plist [Support]
      [not loaded] com.symantec.nav.migrateqtf.plist [Support]
      [invalid?] com.symantec.Sched501-1.plist [Support]
      [running] com.symantec.sharedsettings.plist [Support]
      [running] com.symantec.symdaemon.plist [Support]
      [invalid?] com.symantec.symSchedDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.google.GoogleContactSyncAgent.plist [Support]
    User Login Items: ℹ️
      Microsoft AU Daemon Application  (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Fitbit Connect Menubar Helper Application  (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
      GarminGpsControl: Version: 2.9.3.0 Release [Support]
      NortonInternetSecurityBF: Version: 1.11.0 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      Norton Internet Security [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Norton\nQuickMenu  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 499.25 GB Disk used: 100.60 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 1.00 TB
      Total number of backups: 15
      Oldest backup: 2013-08-01 22:49:49 +0000
      Last backup: 2014-11-06 19:34:10 +0000
      Size of backup disk: Adequate
      Backup size 1.00 TB > (Disk used 100.60 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% Fitbit Connect Menubar Helper
          0% fontd
          0% AppleSpell
          0% launchservicesd
    Top Processes by Memory: ℹ️
      580 MB com.apple.dock.extra
      322 MB SymDaemon
      206 MB Google Chrome
      168 MB spindump
      155 MB mds_stores
    Virtual Memory Information: ℹ️
      7.46 GB Free RAM
      2.59 GB Active RAM
      1.51 GB Inactive RAM
      1.05 GB Wired RAM
      2.56 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 21, 2015, 11:23:52 AM /Library/Logs/DiagnosticReports/rpcsvchost_2015-01-21-112352_[redacted].cpu_res ource.diag [Details]
      Jan 21, 2015, 11:18:14 AM Self test - passed

  • SAP SNC Portal DCM screen performance is very slow and times out

    Friends,
    SAP SNC Portal DCM screen performance is very slow and times out when user trying to pull data using customer location
    What are the cleanup activites we can do to improve the overall SNC performance ?
    We did open OSS message but so far no reply from SAP , Is there any one faced performance issue ?
    User/vendor is complaining about slowness , query is standard SAP and its taking more time  .(table - /LIME/NTREE) , It looks like number of data are huge causing this problem related to LIME/NTREE table. What are the options to improve the performance ?
    Thanks in Advance
    Hanuman Choudhary

    hi Team,
    Pls . note the advise from SAP below, IS there any have experiance of archiveing /LIME records ?
    Please advise how to start & what the steps in archiving ?
    Thanks in advance
    I had a look at the DCM query performance in PH1 system and figured out
    that most of the time is spent at the LIME layer of database. The
    following LIME tables are having far too many entries and is causing
    the bottleneck during the query execution.
    /LIME/NLOG_QUAN - 38,165,467
    /LIME/PN_ITEM - 19,116,518
    /LIME/PN_ITEM_TB - 19,154,124
    These tables are storing the historical information about LIME(stock)
    updates. Since these table grow with each change/update of stock
    information, it will slow down the performance of the system over a
    period of time. And to avoid the slow responses, the tables should
    ideally be archived on a periodic basis to keep the data volume as
    minimal as possible. You may have to discuss with the Business to
    determine the number of days of LIME record you would want to retain
    in the system. I would strongly recommend you to consider the LIME
    archival retaining the minimum days (<=60 days) of historical
    information. You can find more information about the Lime Archival
    in the Sap Help link:
    http://help.sap.com/saphelp_scm2007/helpdata/en/44/2a83121dde23d1e10000000a1553f7/frameset.htm.
    Kindly get in touch with your BASIS consultant for the LIME archival.
    The application performance should definitely improve after the LIME
    archival. Please do not hesitate to get in touch with me in case you
    require any further clarification in this regards.
    Best Regards

  • VERY SLOW charging

    hello, my z10 is very slow charge since last week. I try to reset to factory (in BBLink), Security Wipe, and battery pull, but it's not work . It take 10 mins per 1%, HELP ME PLEASE
    PS. current OS 10.2.1.2102

    curve8530curve8330 wrote:
     This is known to jump start some BB batteries.
    There is nothing from the user here which indicates the battery needs any "jumpstart".
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Very slow response, stopping for seconds in the middle of typing an email

    I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.

    For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.

  • My BB Z30 very slow charging it take 8 hours full charging

    It is always recommended that BlackBerry users use BlackBerry branded accessories that come with the device. You should use the BlackBerry charger that came with the device. When charging a BlackBerry smartphone (Z30, Passport, Leap etc) with large batteries, it may take a while to fully charge the battery. Basically bigger batteries take longer to charge. I would say 8 hours to fully charge a BlackBerry Z30 is about right. For me personally I would leave my BlackBerry device charging longer.

    Dear Sir !my bbz30 very slow charging it full charge in 8 hours please help me. i have charger 2amp charger. please tell which amp best fast charging for my bbz30.  thank you

  • My iMac running very slow some times its hang, its happened after I update Lion, please anybody advice me what to do?

    My iMac running very slow some times its hang, its happened after I update Lion, please anybody advice me what to do?

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • My new iphone 6+ very very slow charging. 6% increasing in 1 hour charging.

    My new iphone 6+ very very slow charging. 6% increasing in 1 hour charging.

    How are you charging it? Are you using the included cable and charger? Are you plugging it into the wall? Or are you charging it from the USB port on a computer? What troubleshooting steps have you taken?
    The phone will charge best using the included cable and charger plugged into a wall outlet. If that's what you're doing and you're still having problems, you should try a couple of things. Have you tried resetting your device by pressing and holding the Home button and power button until the apple appears? Try a different cable. Try a different charger. Try a different outlet.
    If everything fails, make an appointment at the Genius Bar at your local Apple Store.

  • Initial battery charging time for new Curve 8900

    Does anyone know what should be the Initial charge time for a new 8900 Curve?
    Different sites say different things.........
    Thanks.

    Hi and welcome to the forums!
    Here is a great link on battery optimization and charging, by JSANDERS:
    The newer lithium batteries are addressed.
    Thanks,
    Bifocals
    http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Very slow charging in Xperia z

    It takes around 3 hours to full charge, after lollipop update.
    Previous kitkat was good I think.
    Please solve the issue of slow charging in Xperia z.
    Kind attention

     Are you using a wall charger? Sony's charger and cable? are you using the phone while charging? 

  • IPhone 5 with iOS 7 .. very slow charge

    Since I upgraded my iphone 5 to iOS 7 .. charging time is significantly increased. Meaning it takes forever to charge from 10% to even 50%
    when my iphone is on charge, and I'm reading a book, it gets stuck on the same number. Meaning if I charge my phone while it was on 48% .. when I use it lightly .. it gets stuck on 48% and never goes up!
    Also, when I use the phone, the battery drains in a very fast pace! even though I closed all the locations services, background refresh app setting, and the (so called) 3D moving apps or background screen.
    when I was on iOS 6 yesterday, everything seems to be fine. Just today, when I upgraded to iOS 7, this thing happened to me.
    I'm using the original charger.
    Any help?

    It has been my experience when using phone there is a slower loss of power when I am connected to a stable / private wifi as oppose to public wifi. In addition when I am out and am using solely my phone carrier satellite connection the battery is consumed quickly. To avoid slow down I clear all. Multitask trays ever hour and if using a large app only keep that app open and close it when I'm done.
    As for recharging I find that connecting to private wifi and leave it connected to electrical outlet For at least 16 hrs 3 times a week reinforces charge when I'm out
    Last when u are out and not using phone put it on what I call sleep mode by pressing top button to dim screen this seems to conserve power as well
    I also want to share a tip about charging devices in your car. Make sure you unplug charger when u are not driving or needing it because the auto outlet current drains car battery especially in extreme temperature changes.

Maybe you are looking for

  • How to connect to the  multiple system in the same environment

    Hi Everyone , We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment . Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get : "u2022  Account informa

  • Macbook Pro randomly freezes time to time

    My Macbook Pro, end '11, randomly freezes from time to time. Especially when I'm on iTunes/Spotify/VLC/Skype. I ran the Etrecheck program and got this output. Could someone tell me how to fix this? It isn't exactly really ****** but it does get frust

  • Dynamic field in a cursor

    hi there! i want to make a cursor that changes the field in the select list according to a given parameter. for instance, can i do somethind like this? cursor my_cur(my_field varchar2) is select my_field from my_table; and furter more, can i do somet

  • Ragged/Jagged Arrays

    hey guys i was wondering if you guys could help me a bit^^. http://bingweb.binghamton.edu/~cs140/Homework/assignment06.html this is the assignment that i have to do and i am stuck on #3. here is my code for ArrayDataVer2 package assig6; public class

  • My macbook pro won't charge due to an electric shock

    My macbook pro won't charge due to an electric shock that was caused from a charger that was in a bad condition, the computer didn't turn off when it happened but it stopped charging. When the battery died it refused to charge with any charger, I eve