Very slow connection Airport Extreme

Hi,
I'm running tiger 10.4.11 on macbook.
I've had major issues with the slow connection on my Airport extreme. based on the speedtest.com (i have time warner cable modem) i have 20meg download, 7ms ping, ang about 500k upload speeds.
But sometimes it takes 20 seconds to load a page like yahoo.com, and at times it just hangs. I updated the driver and admin utility last week, but the same problem persists.
any thoughts or solutions would be much appreciated.

- i checked under develop menu of my safari, but i dont see the "show network timeline"
Don't dwell on the issue. It would be helpful to know what Safari (or Firefox) is spending so much time to load, but that won't solve the problem. What version of Safari are you running anyway? The latest one works fine with Tiger, in fact it's the fastest version yet. I recommend it. Here's the link: http://www.apple.com/safari/download/
One thing is certain - you ought not to use Airport Admin Utility any more. Download and install Airport Utility. Earlier versions "may not offer expected features or may not be able to configure your hardware properly." You might find Airport Utility will offer a firmware upgrade for your Extreme. Install it.
Once all your equipment and software is updated, then let's find out what's causing your slowness.

Similar Messages

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

Mavericks install incomplete. No Apple installers on HD. Will I be able to upgrade to Yosemite and will it fix all that didn't install with Mavericks upgrade? Very slow connection speeds 30 hrs to download Mavericks. Tried re-install; no help/

Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory 4 GB 1600 MHz DDR3; Graphics Intel HD Graphics 4000 1024 MB.
Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
Thanks,
JJ

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Connect AirPort Extreme Base Station to air card

How do you connect AirPort Extreme Base Station to Verizon Air Card?

Sorry, but the Air Card cannot be used with the USB port on the AirPort Extreme because that port will only work with a hard drive and/or a printer.
Suggest that you check with Verizon to see if they have an adapter or wireless router for the Air Card that will provide an Ethernet signal to the AirPort Extreme.

Can I use non-apple notebook to connect AirPort Extreme?

I
Can I use non-apple notebook to connect AirPort Extreme?

He might be trying to do so to promote his products or may be there was some misunderstanding.
Airport Extreme will work as a wireless router supporting upto 50 systems including Mac computers, PCs, iPad, iPhone, iPod touch, Apple TV and virtually all 802.11a/b/g/n Wi-Fi wireless devices — all at the same time.
for reference http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme

Cable needed to connect airport extreme?

How do I connect airport extreme to older speakers which are connected to older receiver amp? Do I need USB to radio jack? Have Itunes on IMAC , os 10.4.11. I know I need to update os sy to 10.5. I have new Iphone. I want to use remote app to send music to speakers.

There is not an audio port on the AirPort Extreme, so it cannot be used to stream audio per your question.
An AirPort Express will do the job.

Wifi connection AirPort Extreme with IP-camera

I can't establish wifi connection Airport Extreme with IP-camera. At the same time cable connection is fine, but wifi not.
Please, give me an advise.

You need to create a wireless network on the AirPort Extreme, and then you probably will want to assign a compatible static LAN IP address to the camera so that you can port-forward from the router to the camera.

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

ARD 3.7.2 very slow connection on Lan

I'm running ARD 3.7.2 on MacBook Air (OSX 10.9.2) to connect mac mini (8gb / osx 10.9.2) very slow connection on LAN.
Mini connected to LAN 100Mbit Ethernet, MacBook connection is wi-fi

Ok, I solved it after doing some extensive Google searching. Still not sure why ARD went bonkers, but here's my fix.
1. Download the ARD 3.7.1 client drom the Apple downloads page and install it manually on the client machine.
2. Go back to the administrator machine and delete the computer client from the computers list.
3. From the scanners list, find the now visible client machine (it will probably say "no user name or password" next to it) and drag it to the computer list.
4. When you drag it over it will ask for the username and password. Fill in an administrator user name and password for that computer, click OK and you're done.
Still a mystery as to why ARD software itself will not create new client packages. I still haven't figured that part out. Downloading the standard client package from Apple is the only work around I know of so far. Good luck.

Very slow connection with Mifi 4510L??

I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
Brian

I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

Tweak Firefox to very slow connection

Como configurar(no about:config) o meu firefox para conexões muito lentas?
Algo em torno de 32KBps?
Máximo de conexões? Pipeling? Requisições máximas, etc...
Obrigado desde já.
How to tweak(in about:config) Firefox to very slow connection?
Like 32KBps.
maxrequests? Pipeling(true or false)? MaxConn?
Thanks!

Olá sistematico,
Postei uma resposta [https://support.mozilla.org/pt-BR/questions/960088 neste outro tópico].
Aguardamos sua resposta nele, para que possamos lhe ajudar. =)
Abraços,
- Ralph

Connect Airport Extreme to existing router without ethernet cable

I am looking to connect my Airport Extreme to an existing router without the use of the ethernet cable. The existing router is on the ground floor whilst I would like to install the Airport Extreme in the first floor to improve WiFi range on the 1st floor. I am able to connect Airport Extreme to the router with the ethernet cable (in which case both the devices have to be close to one another on the ground floor) but unable to get Airport Extreme set up without the ethernet cable. Is it possible to connect Airport Extreme to the existing router on a non-wired basis (i.e. without the ethernet cable) and if yes, how would be I able to do it. Any help would be appreciated.

The AirPort Extreme can connect wirelessly.....IF.....your existing router is also another Apple router.
Is that the case here? If yes, what model number is your existing Apple router?
If no, you will need to continue to connect the AirPort Extreme using a wired Ethernet connection.

Very slow connection after phone line repair

I had my phone line repaired yesterday with new cabling and new BT box for phone and computer.My phone is fine, but the hub for my broadband does not appear to be ok. the phone symbol on the hub did not light up at all this morning, and after restarting the hub and going back to default settings it is now glowing orange only. It was ok yesterday after being fixed. Very slow connection now. Should i keep everything on to see if it will right itself, or re-start yet again?
I have been looking on BT's options for fixing but can't seem to find anything. the connections in my area are fine so it can't be an outside fault

Which home hub do you have? Did you recently re-contract or change your package, as that will affect your hub phone.
As for the speed issue, it should get better if you leave it alone.
See Why has my speed dropped
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Very SLOW connection - 5 mbps download

Since November, 2014, I've been experiencing very slow connection.
Redlands, CA 92373
5 mbps download 30 mbps upload
Called the call center 5 times. Each time, just a bunch of rebooting the router & speedtest.net checking
A new Verizon router was installed and didn't improve anything.
Technician 1 visited and mentioned that there is a network hardware problem in the area and many people called in for slow connection issues. The technician rebooted the ONT box and said if the speed goes down again, the ONT box should be replaced. The speed went down as soon as the technical left.
Technician 2 visited and replaced the ONT box. Later that day, the speed went down to 5 mpbs for download.
It's so slow at the time of writing this that Facebook page is rendered with texts only.
Are there anyone from Redlands, CA area who have been experiencing the slow connection for a while?
I don't want to call in again to go thru another around of 1 hour long rebooting / resetting the router and chekcing the speedtest.net exercises.
I feel I am being ripped off because I am paying for 75/75.
I'm running out of patience and am considering to switch to Timewarner.

Oh Man this things popping out of everywhere!!!!!!!
1.Router: Quantum G1100 (Primary)2.Router :Nighthawk AC1900
3.Speed:75/75 Mbps
4.FIOS TV Ultimate HD
5.FiOS Digital Voice Unlimited

Very slow connection Airport Extreme

Similar Messages

Maybe you are looking for