Very slow network speed

Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!

Similar Messages

Slow Network Speed with MacPro

I just received 4 MacPro's with the dual quad processors. I have configured 3 for our workplace and have moved them into production. We are experiencing very slow network speeds, a test file on our server of 100mb takes 2 minutes 20 seconds to copy to the desktop. I have manually set the ethernet port to 100baseT with full duplo. The old machine is running the same OS 10.4.10, and only takes 12 seconds to copy the file. I should mention that we use DAVE to connect to our servers, both machines are running the same version of DAVE, and using a third machine I connected to both drops and the file copied in 12 sec, showing that the network is physically OK. The only difference between the two machines is that one is the intel version? Can anyone offer any thing to try?
Thanks
Message was edited by: Mark Crane
Message was edited by: Mark Crane

I am 99% sure someone else had 'slow transfer' in another thread.
Sometimes a router needs firmware update to be compatible, or upgrade the cables to cat6e, or look for a new router or switch which helped my own setup. Just look for one that says that it is "Vista compatible" actually.
http://www.thursby.com/products/dave-vs-tiger.html

Slow network speed during peak times

I have begun experiencing very slow network speeds in the evening. My Mifi and other devices go from routinely getting 10 MBS down to 1 MBS in the evening. Is there any way to address this?

Rickrdn1,
Thank you for all of the detailed information. The coverage in the area looks great. All of your devices seem to drop in speeds at the same time? How is voice and text working during these times? The coverage in the area looks great, but can still be affected by congestion at peak times of usage. We may want to investigate your area further with a remedy ticket.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Very slow broadband speeds

Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.

Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation.

Very Slow Download Speed

Hi,
I am experiencing very slow downloading speeds, when I am just normally downloading something in Safari, or downloading a torrent with upto 100 seeders.
The maximum download speed I have seen on my computer is 80kb/s, which is painfully slow for downloading the Adobe trials, when they reach about 1gb.
I have a router, connected to 2 computers, and speedtest.net has told me that my download speed is 1mb/s.
It seems like download speeds are being restricted to 80kb/s, so is there any way to 'unlock' full potential downloading speeds?
Any help much appreciated!
-Ollie
Message was edited by: Ollie A

I think you're making the same mistake a lot of people make.
The maximum download speed I have seen on my computer is 80kb/s
Safari reports downloads in kiloBYTES per second, not kilobits, so that 80KB/s translates to about 640 kilobits per second.
downloading the Adobe trials, when they reach about 1gb
Really? 1 gigabit per second? I assume that's a typo.
speedtest.net has told me that my download speed is 1mb/s
therefore your downloads are progressing at about 64% of maximum. That sounds about right - you won't get maximum throughput for every download - it will vary based on server location, network load and more.

Very slow network throughput since 2-3 days ago

I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
I see (from what I can tell) no relevant package updates during that period.
Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
I've been running this setup for many years now, without such issues.
But now, it's as if throughput is capped around 100Mbps.
Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
ifconfig does not say anything.
PS: netstat -i does not report any errors over the connection.
Last edited by wantilles (2011-04-12 15:25:52)

experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
Any insights?
edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
My rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
#MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
#MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="davelab"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
# vboxnetflt
eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !wlan0 !lo)
#WIRELESS_INTERFACE="wlan0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
dmesg output:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
Command line: root=/dev/sda3 ro resume=/dev/sda3 5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DBFFF uncachable
DC000-EFFFF write-through
F0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0A0000000 mask FE0000000 uncachable
1 base 0C0000000 mask FC0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 140000000 mask FE0000000 write-back
5 base 09FF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f7b50] f7b50
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000008fec0000
0000000000 - 008fe00000 page 2M
008fe00000 - 008fec0000 page 4k
kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
init_memory_mapping: 0000000100000000-0000000160000000
0100000000 - 0160000000 page 2M
kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
RAMDISK: 37e56000 - 37ff0000
ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
ACPI: FACS 000000008fee4fc0 00040
ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000160000000
Initmem setup node 0 0000000000000000-0000000160000000
NODE_DATA [000000015fffb000 - 000000015fffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00160000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0008fec0
0: 0x00100000 -> 0x00160000
On node 0 totalpages: 982605
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 571128 pages, LIFO batch:31
Normal zone: 5376 pages used for memmap
Normal zone: 387840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10dea301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
Policy zone: Normal
Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 39321600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.376 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9604.67 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: PME# disabled
pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.0: PME# disabled
pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
pci 0000:01:07.1: supports D1 D2
pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.1: PME# disabled
pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
pci 0000:01:07.2: supports D1 D2
pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.2: PME# disabled
pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
pci 0000:01:07.3: supports D1 D2
pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.3: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000008fec0000 - 000000008fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xffc00000-0xffffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfeefffff]
pnp 00:00: [mem 0xfed00000-0xfed00fff]
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0x000f0000-0x000fffff window]
pnp 00:01: [mem 0xa0000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [mem 0xf0600000-0xf0607fff]
pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1080-0x10ff]
pnp 00:04: [io 0x1400-0x147f]
pnp 00:04: [io 0x1480-0x14ff]
pnp 00:04: [io 0x1800-0x187f]
pnp 00:04: [io 0x1880-0x18ff]
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [irq 12]
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0072-0x0073]
pnp 00:07: [io 0x0074-0x007f]
pnp 00:07: [io 0x0091-0x0093]
pnp 00:07: [io 0x0097-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0910-0x0911]
pnp 00:07: [io 0x0295-0x0296]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0910-0x0911] has been reserved
system 00:07: [io 0x0295-0x0296] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0000-0x0008]
pnp 00:08: [io 0x000a-0x000f]
pnp 00:08: [io 0x0081-0x0083]
pnp 00:08: [io 0x0087]
pnp 00:08: [io 0x0089-0x008b]
pnp 00:08: [io 0x008f]
pnp 00:08: [io 0x00c0-0x00d1]
pnp 00:08: [io 0x00d4-0x00df]
pnp 00:08: [dma 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:09: [io 0x0061]
pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0b: [io 0x00f0-0x00f1]
pnp 00:0b: [irq 13]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0c: [io 0x0300-0x0307]
pnp 00:0c: [irq 10]
pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io disabled]
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io disabled]
pci 0000:00:17.0: bridge window [mem disabled]
pci 0000:00:17.0: bridge window [mem pref disabled]
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io disabled]
pci 0000:00:18.0: bridge window [mem disabled]
pci 0000:00:18.0: bridge window [mem pref disabled]
pci 0000:00:09.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:16.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:17.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:18.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1640k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
software IO TLB at phys 0x8bc00000 - 0x8fc00000
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1302716230.603:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7422
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/sda3
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
Initalizing network drop monitor service
Freeing unused kernel memory: 556k freed
udev[38]: starting version 166
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
ahci 0000:00:0b.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2399.988 MHz.
Switching to clocksource tsc
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev[632]: starting version 166
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
ath9k 0000:06:00.0: setting latency timer to 64
input: PC Speaker as /devices/platform/pcspkr/input/input1
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x3040
i2c i2c-1: nForce2 SMBus adapter at 0x2000
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
wmi: Mapper loaded
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: EC: GPE storm detected, transactions will use polling mode
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (60 C)
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
ACPI: AC Adapter [ADP0] (on-line)
usb 1-2: new high speed USB device using ehci_hcd and address 3
input: Dell WMI hotkeys as /devices/virtual/input/input7
acpi device:0c: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
acpi device:14: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
usb 2-1: new high speed USB device using ehci_hcd and address 2
firewire_core: created device fw0: GUID 424fc00010f09890, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: new low speed USB device using ehci_hcd and address 5
usb 1-1.2: new full speed USB device using ehci_hcd and address 6
usb 1-1.4: new high speed USB device using ehci_hcd and address 7
cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
cdc_acm 2-1:1.1: ttyACM0: USB ACM device
cdc_acm 2-1:1.3: ttyACM1: USB ACM device
scsi6 : usb-storage 1-2:1.0
cdc_acm 2-1:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
scsi7 : usb-storage 1-1.4:1.0
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ether
input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver uas
usbcore: registered new interface driver zaurus
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 7:0:0:0: [sdc] Attached SCSI disk
sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
hda-intel: Codec #1 probe error; disabling it...
firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
fuse init (API version 7.16)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:02:00.0: enabling device (0004 -> 0007)
nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
loop: module loaded
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
usb 3-4: new full speed USB device using ohci_hcd and address 2
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 3 ports detected
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
usb 3-4.1: new full speed USB device using ohci_hcd and address 3
input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
usb 3-4.2: new full speed USB device using ohci_hcd and address 4
input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
usb 3-4.3: new full speed USB device using ohci_hcd and address 5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
CE: hpet increased min_delta_ns to 11520 nsec
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
forcedeth 0000:00:0a.0: eth0: no link during initialization
ohci_hcd 0000:00:06.0: PCI INT A disabled
ohci_hcd 0000:00:06.0: PME# enabled
ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
ohci_hcd 0000:00:06.0: PME# disabled
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
i2c /dev entries driver
wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
wlan0: authenticated
wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Intel AES-NI instructions are not detected.
padlock_aes: VIA PadLock not detected.
wlan0: no IPv6 routers present
EXT4-fs (sda3): re-mounted. Opts: commit=0
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
ifconfig wlan0:
wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
I wonder why this is happening
Last edited by king.flasher.dave (2011-04-13 16:15:59)

Very slow download speed with intermittent halts

Need some help.
I run Apple os/x latest version and have since yesterday begun to experience constant very slow download speeds.
I have rebooted the router and I have reset it. I have tested with wireless and wired into router. No real change.
The results are below and are pretty consistent no matter when or with what computer I test it with.
This is very frustrating and I would like to know if anyone has experienced this and if there is anything I can do before calling for service.
Thank you in advance.
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [131768]
running 10s outbound test (client to server) . . . . . 5.44Mb/s
running 10s inbound test (server to client) . . . . . . 1.94Mb/s
------ Client System Details ------
OS data&colon; Name = Mac OS X, Architecture = x86_64, Version = 10.8.2
Java data&colon; Vendor = Apple Inc., Version = 1.6.0_37
------ Web100 Detailed Analysis ------
Client Receive Window detected at 359104 bytes.
10 Mbps Ethernet link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 22.89 msec; the Packet size = 1448 Bytes; and
There were 159 packets retransmitted, 288 duplicate acks received, and 394 SACK blocks received
The connection stalled 9 times due to packet loss
The connection was idle 2.01 seconds (16.75%) of the time
This connection is sender limited 35.49% of the time.
This connection is network limited 64.51% of the time.
Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: ON
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [71.100.xxx.xxx] but Client says [192.168.1.9]

Both wired or wireless.
auto - negotiate
Thank you.

Why i have very very slow downloading speed on wifi on iphone5

While on wifi I am experiencing very slow downloading speed on iPhone 5. My iPhone 5 is a brand new phone, I have to wait for hours to complete a running download of about 40mb or so. Please help me and tell me if there is any solution to that. On the same wifi network I have the new iPad and iPhone 4 and iPhone 4S, all are working perfectly getting perfect speed while downloading but I can't on iPhone 5.

What you did was fine. Leopard is a little different to 10.4.11, but:
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

Very slow download speeds with ATT U-Verse

Hello,
Experiencing very slow download speeds with Macbook Pro 2011, on Lion, and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
Any suggestions welcome!
Thanks

Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

Very slow upload speed via infinity 2 (business) u...

Very slow upload speed via infinity 2 (business) unlimited after phone line fix (street cabinet) ?
Had my line fixed today by engineer (no dial tone).
Download rate near normal but upload = 0.73Mbps!?
I reset modem and router after he left and appreciate my profile is probably in need of some TLC after a weeks line fault, but is this normal in this situation? I heard it can take some time to reprofile my line and before it was fixed it was even worse at 0.10Mbps
Just seems very low considered the line is now operational again.

48Hrs+ on from residential line reconnection my business infinity 2 broadband upload speed is now approaching normal speed levels.
What a 10 days that was all because some ass disturbed the cabling in the street cabinet!
Yes I'm aware I have business broadband and am talking about it in a residential based forum, but my actual phone line is still residential that it is supplied over and the business broadband product is much the same animal as that supplied to residential customers i.e. Infinity 2 Unlimited. Only the mail and option of static i.p. appear different - that is all.
Jeez.

VERY slow broadband speeds (0.76mbps) Phoneline?

VERY slow broadband speeds (0.76mbps)
Options
on 28-10-2012 12h38
ROUTER STATISTICS
System Up Time: 0:08:24
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLAN
MER
2351
2177
0
136
104
0:00:56
324
0
0
0
0
0:08:24
6762
6743
0
164
132
0:07:57
ADSL Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin
766 kbps
414 kbps
48.5 db
27.1 db
15.7 db
16.3 db
I'm with Sky, and have had very slow broadband for a while now. Above are the statistics from the test socket. Sky seem to think there is a problem with the line. I've now plugged the router into the main socket.
Any help would be appreciated.
**EDIT** My phone line is with BT, my broadband is with Sky. The problem Sky says is with the phone line it seems.

Hi Joe,
Try sticking your telephone number into this line tester page and let us know if it finds a fault. If it comes back clear, you'll need to go back to Sky as there'll be no issues with your telephone line. If it comes back with a line fault, we can get it progressed towards a fix
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Very slow connection speed

Very slow internet speed past 10 days. Have completed 1) VIOS recommended optimizer; 2) speed check (3.1 down, time out on upload); 3) diagnostic check (never completes analyzing); 4) turning router and devices off/on. Any other suggestions appreciated. Thanks

PLEASE NOTE MY LOCATION.
MY FiOS SERVICE MEETS MY NEEDS
Tom
Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
Data Object 39.45
Attachments:
FiOS Internet Speed Tests 1 5 2014.pdf ‏41 KB

E1200 router: very slow download speeds, ok uploady got

I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.
When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
What could the problem be?

So we could have this isolated, check how much speed you’re getting straight to the modem so we’ll have some point of comparison that from your internet provider. If through the router, you have struggles with not getting an acceptable value for download speed especially if it only happens with the wireless connection, you can try these: change the wireless channel and the wireless security on the router. If on the router, you have the channel set to auto by default change it to (3,6,9,11), just have to play around with it. Moreover, for the wireless security, select WPA2 Personal. If that doesn’t make any difference, update the firmware of the router, reset and have it reconfigured.

My Verizon iPhone 5 has very slow upload speeds that causes my apps to time out. Is anyone else experiencing this? It only happens on 4g.

My Verizon iPhone 5 has very slow upload speeds that causes my apps to time out. Is anyone else experiencing this? It only happens on 4g.

Then Restore your iPhone Firmware with iTunes on computer. See if better. If not, talk to Verizon and see if they know of the problem and if there is a fix. If not, then make Genius reservation and take iPhone to Apple for resolution under Warranty.

Very slow network speed

Similar Messages

Maybe you are looking for