Very slow network transfer (AFP, thunderbolt, nas, gigabit, lan, lion)

Hi,
When copying large files (100GB) from my macbook air to my Qnap NAS the transfer is very slow (100kB/s). It becomes immediately much faster (10MB/s) when I lock my session.
The MBA is connected via the gigabit port of the thundrbold display and a gigabit switch to the gigabit port of the NAS.
There is negligible other network activity shown when monitoring NAS or MBA bandwith usage.
So what can limit bandwith of a mac while in unlocked session?
Is the a bug in thunderbolt display dramtically deminishing bandwith when used? Bandwitdth is already high when locked and display shows login screen. It does not need to fall asleep.
Thx

I want to thank you for your help but I think I have to give up. I've been trying for days to get the MBP just to recognise the NFS share. I've tried adding a server in Finder with no luck. I tried Directory Utility with full R/W access setup on NAS, then tried accessing root NAS folder, then the specific share folders, then with specific user enabled on the specific share folders but whatever I try I get nothing. I've changed my local username and password and UID on the Mac to exactly the same one I use for my NAS but it still won't find it and none of the command line options that people suggest do anything at all. I've tried SMB and AFP but they're both sluggish and nowhere near the performance of XP on the same hardware. For an OS that supposedly 'Just Works' I've had a very complicated, tedious and fruitless experience (pun intended). Maybe it's just me because others seem to report no problems accessing their NFS shares or transferring at high speeds with AFP or even SMB but I've had no luck whatsoever. Very frustrating indeed.
Again, sincere thanks for your time and I'll tag the post as answered because for all intents and purposes you answered my question very well. Unfortunately, this Mac just doesn't like me and I don't think I'll be spending money on one anytime soon.

Similar Messages

  • Very slow network throughput since 2-3 days ago

    I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
    I see (from what I can tell) no relevant package updates during that period.
    Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
    I've been running this setup for many years now, without such issues.
    But now, it's as if throughput is capped around 100Mbps.
    Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
    ifconfig does not say anything.
    PS: netstat -i does not report any errors over the connection.
    Last edited by wantilles (2011-04-12 15:25:52)

    experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
    Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
    edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
    Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
    More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
    Any insights?
    edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
    How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
    My rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="de"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
    #MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
    #MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="davelab"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    # vboxnetflt
    eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !wlan0 !lo)
    #WIRELESS_INTERFACE="wlan0"
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
    dmesg output:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
    Command line: root=/dev/sda3 ro resume=/dev/sda3 5
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
    BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
    BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
    NX (Execute Disable) protection: active
    DMI present.
    DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x160000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DBFFF uncachable
    DC000-EFFFF write-through
    F0000-FFFFF write-back
    MTRR variable ranges enabled:
    0 base 0A0000000 mask FE0000000 uncachable
    1 base 0C0000000 mask FC0000000 uncachable
    2 base 000000000 mask F00000000 write-back
    3 base 100000000 mask FC0000000 write-back
    4 base 140000000 mask FE0000000 write-back
    5 base 09FF00000 mask FFFF00000 uncachable
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
    found SMP MP-table at [ffff8800000f7b50] f7b50
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-000000008fec0000
    0000000000 - 008fe00000 page 2M
    008fe00000 - 008fec0000 page 4k
    kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
    init_memory_mapping: 0000000100000000-0000000160000000
    0100000000 - 0160000000 page 2M
    kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
    RAMDISK: 37e56000 - 37ff0000
    ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
    ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
    ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
    ACPI: FACS 000000008fee4fc0 00040
    ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
    ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000160000000
    Initmem setup node 0 0000000000000000-0000000160000000
    NODE_DATA [000000015fffb000 - 000000015fffffff]
    [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00160000
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0008fec0
    0: 0x00100000 -> 0x00160000
    On node 0 totalpages: 982605
    DMA zone: 56 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3919 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 571128 pages, LIFO batch:31
    Normal zone: 5376 pages used for memmap
    Normal zone: 387840 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10dea301 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
    PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
    PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
    PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
    PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
    Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
    pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
    Policy zone: Normal
    Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 39321600 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2400.376 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20110112
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (9604.67 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    HEST: Table not found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
    pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
    pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
    pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
    pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
    pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
    pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
    pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
    pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
    pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
    pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
    pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
    pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
    pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
    pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
    pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
    pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
    pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
    pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
    pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
    pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
    pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
    pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
    pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
    pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
    pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
    pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
    pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
    pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:18.0: PME# disabled
    pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
    pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
    pci 0000:01:07.0: supports D1 D2
    pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.0: PME# disabled
    pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
    pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
    pci 0000:01:07.1: supports D1 D2
    pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.1: PME# disabled
    pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
    pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
    pci 0000:01:07.2: supports D1 D2
    pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.2: PME# disabled
    pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
    pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
    pci 0000:01:07.3: supports D1 D2
    pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.3: PME# disabled
    pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
    pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
    pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
    pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
    pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
    pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
    pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
    pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
    pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
    pci 0000:06:00.0: supports D1
    pci 0000:06:00.0: PME# supported from D0 D1 D3hot
    pci 0000:06:00.0: PME# disabled
    pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
    ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
    vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000008fec0000 - 000000008fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [mem 0xffc00000-0xffffffff]
    pnp 00:00: [mem 0xfec00000-0xfec00fff]
    pnp 00:00: [mem 0xfee00000-0xfeefffff]
    pnp 00:00: [mem 0xfed00000-0xfed00fff]
    system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:01: [bus 00-ff]
    pnp 00:01: [io 0x0cf8-0x0cff]
    pnp 00:01: [io 0x0000-0x0cf7 window]
    pnp 00:01: [io 0x0d00-0xffff window]
    pnp 00:01: [mem 0x000a0000-0x000bffff window]
    pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    pnp 00:01: [mem 0x000cc000-0x000cffff window]
    pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    pnp 00:01: [mem 0x000dc000-0x000dffff window]
    pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    pnp 00:01: [mem 0x000ec000-0x000effff window]
    pnp 00:01: [mem 0x000f0000-0x000fffff window]
    pnp 00:01: [mem 0xa0000000-0xfebfffff window]
    pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:02: [irq 0 disabled]
    pnp 00:02: [irq 8]
    pnp 00:02: [mem 0xfed00000-0xfed003ff]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:03: [mem 0xf0600000-0xf0607fff]
    pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
    system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:04: [io 0x1000-0x107f]
    pnp 00:04: [io 0x1080-0x10ff]
    pnp 00:04: [io 0x1400-0x147f]
    pnp 00:04: [io 0x1480-0x14ff]
    pnp 00:04: [io 0x1800-0x187f]
    pnp 00:04: [io 0x1880-0x18ff]
    system 00:04: [io 0x1000-0x107f] has been reserved
    system 00:04: [io 0x1080-0x10ff] has been reserved
    system 00:04: [io 0x1400-0x147f] has been reserved
    system 00:04: [io 0x1480-0x14ff] has been reserved
    system 00:04: [io 0x1800-0x187f] has been reserved
    system 00:04: [io 0x1880-0x18ff] has been reserved
    system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:05: [io 0x0060]
    pnp 00:05: [io 0x0064]
    pnp 00:05: [irq 1]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:06: [irq 12]
    pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Switched to NOHz mode on CPU #0
    Switched to NOHz mode on CPU #1
    pnp 00:07: [io 0x0010-0x001f]
    pnp 00:07: [io 0x0022-0x003f]
    pnp 00:07: [io 0x0044-0x005f]
    pnp 00:07: [io 0x0072-0x0073]
    pnp 00:07: [io 0x0074-0x007f]
    pnp 00:07: [io 0x0091-0x0093]
    pnp 00:07: [io 0x0097-0x009f]
    pnp 00:07: [io 0x00a2-0x00bf]
    pnp 00:07: [io 0x00e0-0x00ef]
    pnp 00:07: [io 0x04d0-0x04d1]
    pnp 00:07: [io 0x0080]
    pnp 00:07: [io 0x0910-0x0911]
    pnp 00:07: [io 0x0295-0x0296]
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [io 0x0910-0x0911] has been reserved
    system 00:07: [io 0x0295-0x0296] has been reserved
    system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:08: [io 0x0000-0x0008]
    pnp 00:08: [io 0x000a-0x000f]
    pnp 00:08: [io 0x0081-0x0083]
    pnp 00:08: [io 0x0087]
    pnp 00:08: [io 0x0089-0x008b]
    pnp 00:08: [io 0x008f]
    pnp 00:08: [io 0x00c0-0x00d1]
    pnp 00:08: [io 0x00d4-0x00df]
    pnp 00:08: [dma 4]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:09: [io 0x0061]
    pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:0a: [io 0x0070-0x0071]
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:0b: [io 0x00f0-0x00f1]
    pnp 00:0b: [irq 13]
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:0c: [io 0x0300-0x0307]
    pnp 00:0c: [irq 10]
    pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:00:09.0: PCI bridge to [bus 01-01]
    pci 0000:00:09.0: bridge window [io disabled]
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem pref disabled]
    pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io disabled]
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io disabled]
    pci 0000:00:17.0: bridge window [mem disabled]
    pci 0000:00:17.0: bridge window [mem pref disabled]
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io disabled]
    pci 0000:00:18.0: bridge window [mem disabled]
    pci 0000:00:18.0: bridge window [mem pref disabled]
    pci 0000:00:09.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
    pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
    pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
    pci 0000:00:15.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
    pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:16.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
    pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:17.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
    pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:18.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
    pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
    pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
    pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:03:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1640k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
    software IO TLB at phys 0x8bc00000 - 0x8fc00000
    Simple Boot Flag at 0x36 set to 0x1
    audit: initializing netlink socket (disabled)
    type=2000 audit(1302716230.603:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7422
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Linux agpgart interface v0.103
    i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    rtc_cmos 00:0a: RTC can wake from S4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Checking hibernation image partition /dev/sda3
    PM: Hibernation image not present or could not be loaded.
    registered taskstats version 1
    rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 556k freed
    udev[38]: starting version 166
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
    ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
    ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
    ahci 0000:00:0b.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
    ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
    ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
    ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
    ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
    ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
    ata2.00: configured for UDMA/133
    ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    Refined TSC clocksource calibration: 2399.988 MHz.
    Switching to clocksource tsc
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    udev[632]: starting version 166
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth 0000:00:0a.0: setting latency timer to 64
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    ath9k 0000:06:00.0: setting latency timer to 64
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
    forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x2000
    ath: EEPROM regdomain: 0x60
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x60
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    wmi: Mapper loaded
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: EC: GPE storm detected, transactions will use polling mode
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    ACPI: Battery Slot [BAT0] (battery present)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (60 C)
    ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    ACPI: AC Adapter [ADP0] (on-line)
    usb 1-2: new high speed USB device using ehci_hcd and address 3
    input: Dell WMI hotkeys as /devices/virtual/input/input7
    acpi device:0c: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
    acpi device:14: registered as cooling_device3
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
    ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    firewire_core: created device fw0: GUID 424fc00010f09890, S400
    firewire_core: phy config: card 0, new root=ffc1, gap_count=5
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    cfg80211: World regulatory domain updated:
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    usb 1-1.1: new low speed USB device using ehci_hcd and address 5
    usb 1-1.2: new full speed USB device using ehci_hcd and address 6
    usb 1-1.4: new high speed USB device using ehci_hcd and address 7
    cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
    cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
    usbcore: registered new interface driver cdc_wdm
    Initializing USB Mass Storage driver...
    cdc_acm 2-1:1.1: ttyACM0: USB ACM device
    cdc_acm 2-1:1.3: ttyACM1: USB ACM device
    scsi6 : usb-storage 1-2:1.0
    cdc_acm 2-1:1.9: ttyACM2: USB ACM device
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver cdc_acm
    cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    scsi7 : usb-storage 1-1.4:1.0
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
    cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
    usbcore: registered new interface driver cdc_ether
    input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    usbcore: registered new interface driver uas
    usbcore: registered new interface driver zaurus
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
    generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
    generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
    generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
    logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
    logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
    logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
    scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
    sd 7:0:0:0: Attached scsi generic sg3 type 0
    sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
    sd 7:0:0:0: [sdc] Write Protect is off
    sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
    sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc: unknown partition table
    sd 7:0:0:0: [sdc] Attached SCSI disk
    sdb: unknown partition table
    sd 6:0:0:0: [sdb] Attached SCSI disk
    hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
    hda-intel: Codec #1 probe error; disabling it...
    firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
    input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
    fuse init (API version 7.16)
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
    nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:02:00.0: enabling device (0004 -> 0007)
    nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:02:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
    nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:03:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
    loop: module loaded
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
    vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver wacom
    wacom: v1.52:USB Wacom tablet driver
    usb 3-4: new full speed USB device using ohci_hcd and address 2
    hub 3-4:1.0: USB hub found
    hub 3-4:1.0: 3 ports detected
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda3): re-mounted. Opts: (null)
    usb 3-4.1: new full speed USB device using ohci_hcd and address 3
    input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
    generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
    usb 3-4.2: new full speed USB device using ohci_hcd and address 4
    input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
    generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
    Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
    usb 3-4.3: new full speed USB device using ohci_hcd and address 5
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    CE: hpet increased min_delta_ns to 11520 nsec
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
    forcedeth 0000:00:0a.0: eth0: no link during initialization
    ohci_hcd 0000:00:06.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: PME# enabled
    ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
    ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
    ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
    ohci_hcd 0000:00:06.0: PME# disabled
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    NET: Registered protocol family 10
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Bluetooth: L2CAP ver 2.15
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    i2c /dev entries driver
    wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: authenticated
    wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    cfg80211: Calling CRDA for country: GB
    cfg80211: Regulatory domain changed to country: GB
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    Intel AES-NI instructions are not detected.
    padlock_aes: VIA PadLock not detected.
    wlan0: no IPv6 routers present
    EXT4-fs (sda3): re-mounted. Opts: commit=0
    warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
    ifconfig wlan0:
    wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
    inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
    TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
    I wonder why this is happening
    Last edited by king.flasher.dave (2011-04-13 16:15:59)

  • Very slow network directory listing - but fast data transfer speed once listed?

    Hello,
    I have really tried to sort this myself before opening up to the community, however I have run out of ideas, and hope someone can offer the magic solution I have missed.
    I am currently using the 3.4ghz i7 iMac on a 1GB LAN, running OSX10.7.2 - connecting to a Windows Server 2008 (Running Release 2) over ethernet.
    If i go to a network directory that i haven't recently accessed it can take up to 60 seconds to show the contents of that directory. Once i have accessed that folder, if i come out of it and go back in it will be instant again - but the first time it lists the directory it looks like i have opened an empty folder - which after anything from 10seconds to 1 minute will suddenly show the files that are there.
    Internet connectivity is fast through the network, and file transfers across the LAN are fast. (showing as approx 300mb per second) I can play and edit HD content across the network with no slowdown so I am confident that this issue is not related to the network speed itself, and is more to do with a setting on this mac.
    Symptoms are very similar to this post: https://discussions.apple.com/message/12245148?messageID=12245148&amp%3b#1224514 8 - however i understand that in OSX Lion - SMB was removed - so i cannot find this file to edit.
    I have tried bypassing additional hubs in the network by wiring direct cables to the switch that is connected to the file server, this made no difference.
    I have also tried disconnecting the ethernet cable, and running over wifi. This fixes the listing problem, but when editing HD content over a network drive, this connection is not fast enough to carry the data without interruption (some projects are linked to up to 900gb of hd video content!)
    Using ethernet, I have tried DHCP, DHCP with manual address, and manual mode. All reproduce this problem. i have tried using the windows workgroup, and tried without it.
    I have also followed this suggestion: https://discussions.apple.com/thread/2134936?threadID=2134936&tstart=45 and used OpenDNS. this did not fix the issue.
    For argument sake, I have also just tested a Macbook Pro running Snow Leopard to see if it was OS related. This reproduces the exact same problem, near instant directory listing on the wifi, a long and arduous wait on ethernet.
    I cannot work out why directory listing is instant over wifi, but not over ethernet on 2 different macs, running 2 different versions of OSX. I also do not understand why if the network is having trouble listing the directories - the data transfer speed is 300mbps when i copy files across the wired network from the file server to the mac.
    Does anyone have any other ideas as to what could be the problem here? We are about to start work on a very large project, where the content we are editing is spread out across around 200 different network folders (different shoots captured over the past 2 years). We really don't have the time to wait 60 seconds each time we need to access one of those directories to look for a file, and I am very close to pulling all my hair out!
    I really look forward to hearing from anyone who can offer any insight.

    If you are suspecting that the Windows update had something to do with your LAN going slow, then try the following:
    1.  Look for updates for your clients LAN NIC driver; or
    2.  Un-install the updates.

  • Hyper-v and very slow network

    Dear all,
    I have a big problem with my hyper-v server and network card. I've found a lot of topic around this question but none of them helped me.
    I have a Win 2008 R2 Server with only Hyper-V installed. I have 3 NIC , one is reserved to the host management and the others two are reserved for virtual machine .
    All NIC are Intel, one is integrated on the Intel motherboard and the others are Intel Gigabit ET Dual port .
    Before installing the role of Hyper-V all NIC worked perfectly with speed around 1Gb (file transfer average 90 MB/Sec, of course I have a Gigabit LAN) .
    After Hyper-V install, the host system  is going very slow and the network file transfer using the dedicated NIC is about ten time slower (9-10MB /sec) . Same problem with all VM off and also if I remove all VM !
    I tried all of suggestion found in old post (disabling TCP checksum / offload ...) but nothing happens.
    What is really strange is that by removing all network card all the Host operating system seems to improve the speed... but, of course, I can't use  my LAN :(
    I need help because every night I must make a full backup of Virtual hard disk from the host to a backup server in my lan.
    My configuration:
    - Server Win 2008 R2 SP1 with Hyper-V and no others role
    - 2 Virtual Machine (one Win 2008 R2 and one Win 7 Ultimate)
    - NAS Linux (access via SMB with no problem)
    - Various Windows 7 Pro client
    Thanks in advance to everybody,
    Luca M.

    I disabled the VMQ on the configuration of the HV physical machine, a LACP with 2 NICs, so i disabled on both.
    Before, i tried to disable  VMQ on the Multiplex adapter (connected to the vswitch and dind´t worked
    The ping times drop form 200ms to 6ms, normal in my environment
    Before and after:
    PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
    Name                      DisplayName                    DisplayValue                   RegistryKeyword RegistryValue
    SLOT 1 Port 2             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 2             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 4             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 4             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 1             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 1             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 3             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 3             Virtual Machine Queues         Enabled                        *VMQ            {1}
    PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
    Name                      DisplayName                    DisplayValue                   RegistryKeyword RegistryValue
    SLOT 1 Port 2             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 2             Virtual Machine Queues         Disabled                       *VMQ            {0}
    SLOT 1 Port 1             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 1             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 3             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 3             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 4             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 4             Virtual Machine Queues         Disabled                       *VMQ            {0}
    PS C:\Users\Administrator> Get-NetLbfoTeam
    Name                   : TeamMGMT
    Members                : {SLOT 1 Port 1, SLOT 1 Port 3}
    TeamNics               : TeamMGMT
    TeamingMode            : Lacp
    LoadBalancingAlgorithm : TransportPorts
    Status                 : Up
    Name                   : TeamVM
    Members                : {SLOT 1 Port 4, SLOT 1 Port 2}
    TeamNics               : TeamVM
    TeamingMode            : Lacp
    LoadBalancingAlgorithm : HyperVPort
    Status                 : Up

  • Very Slow Network access for some computers

    This has me baffled, I'll try my best to explain.
    We have an xserve g5 conected to xserve RAID, the xserve has gigabit ethernet.
    All Client computers are also on Gigabit ethernet.
    Users are all on network homes on the Server.
    Most users are getting descent speeds, transfering a file from the RAID to their (network) desktop takes around 40 seconds for a 1Gb file.
    However two users noticed transfer was much slower, 20 mins for the same file.
    I've ruled out cable problems and hardware problems because if I transfer to the local computer harddrive the speed is up to around 1 minute.
    But I've also ruled out a problem with the user account, because if the same user logs onto another mac the speeds are around 40 seconds.
    I tried logging other users into the problem macs and all users drop to 20 minutes.
    The only thing I can thing it could be is some problem with how those computers are binding with the server, I tried unbinding and resetting up directory access but that made no difference.
    What else can I try other than re-installing?

    I went ahead and did a fresh install, but this did NOT fix the problem.. I really can't think what else I can do!
    Noticed in Network utility there are a lot of received errors when copying a file.
    I replaced all the cables but again I don't think its can be a hardware problem because transfer rates are fine from local harddrive to server, but very slow between 2 network disks (unusually slow, considering all other computers are fast transfering the same file to the same place) HELP!

  • Aperture Library Very Slow Copy to LaCie Thunderbolt Drive

    Just installed new LaCie Thunderbolt drive and copying various media files to it. Music and video files copied like a rocket. My Aperture folder is copying as slow as molasses. Right now it says 2 days to copy 211GB. Any help would be appreciated.

    Sorry, I misread Mtn Ed's last note.  My USB2 was stalling out at 2-3 MB per second.  Quite a bit slower than the stated Thunderbolt rate to say the least.  There is a portion of the Aperture Library that copies at a very slow speed, but after an hour or so it kicks back up to normal file transfer rates.  Finder was originally estimating over 20 hours for the copy to complete.  Now the total elapsed time will be about 3 hours for 350GB.

  • Slow network transfer on 10.5.8

    Hello we have about a dozen machines running 10.5.8 and we have one windows file server running Grouplogic Extreme Z IP. The connection type is AFP.  On one of the machines, although it appears to work well, it tranfers files very slow from the server. It takes 5 minutes to transfer a 2mb file. The machine is a dual processor Mac Pro with Gig ethernet. All the other machines work perfectly and transfer files very fast.
    When I transfer files with SMB from another windows server  machine, the transfer is normal. I would love to think its the server but the other 11 machines work fine and they are all same hardware and software. All machines are joined to our Active Directory system.
    I tried almost all the troubleshooting I know, there are no errors on the switch, no dropped packets. Verified with Netowk Utility. I tried to unbing and rebing the machine to AD.
    Any help would be appreciated.
    Thanks
    Aristotle Zoulas

    That's correct the backup drive has 2 partitions one for the MBP and one for the powermac. I thought of that also, the drive is brand new and when the problem started I repartitioned the drive and switched the MBP and the PM partitions with no effect.

  • Very slow network printing in Mac os 10.6

    Hi,
    I am printing to a HP2035n.
    A networked printer.
    I bought it while I still had 10.5
    It worked like a charm - very fast.
    I upgraded to Snow Leopard (10.6) with a new hard disk in the laptop.
    After this, the printing is very slow. Painfully slow.
    The queue window says "Connecting to the printer..." for each and every print job, and this takes 1-2 minutes for each print job.
    Once a job gets started, the printer is very fast, 20 pages in a minute or so.
    But when I print several print jobs (e.g. bank transactions today) I have to print 40-50 different print jobs, and the printing time takes several hours!
    When I put back the old hard disk with the OS X 10.5, the printing goes very fast on the same hardware, network and wi-fi connection on the airport express.
    How can I improve this situation?
    It is unbearable.
    Kim

    Try resetting some of the hardware involved (PRAM~NVRAM). See this Apple KB for details, etc.:
    http://support.apple.com/kb/HT1379
    Can't hurt to try, and apparently this has helped others recently.

  • Very slow network send speeds

    I am getting very slow speeds while transferring from my computer to a server. I only have two accounts on this computer - my account and then an administrator account I use as a backup and clean user. With the admin account I am getting 25 MB/sec (limit of the firewire drive I tested with), but only ~10 MB/sec while logged in to my account. Would seem very odd but is there a preference somewhere that would effect the speed of only sending data? Pulling from the server I get ~65 MB/sec. Output of ifconfig shows that I am connected in 1000baseT full-duplex. I have tried both ethernet ports on the Mac, two ports on the switch, and two cables from the etherent port on the Mac to the switch, so the problem doesn't seems to be on the physical layer, but rather only when logged in to my account. Any ideas are appreciated as this is killing my performance during large file saves. Thanks!

    Tried again on the admin side. Seems that has slowed down now too. Getting about the same speeds on that account. Is it possible Vmware Fusion is causing any problems? Looks like it created a couple interfaces for network bridging to function, but I can't see how this would effect my network speeds on the host OS. Here is an output of ifconfig just in case it helps
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr 00:21:e9:ff:fe:c8:62:4a
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
    ether 00:1f:5b:39:ba:a8
    media: autoselect (<unknown type>) status: inactive
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21f:5bff:fe39:baa9%en1 prefixlen 64 scopeid 0x6
    inet 192.168.2.12 netmask 0xffffff00 broadcast 192.168.2.255
    ether 00:1f:5b:39:ba:a9
    media: autoselect (1000baseT <full-duplex>) status: active
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
    en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:22:41:d0:38:a1
    media: autoselect status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex>
    vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet 172.16.95.1 netmask 0xffffff00 broadcast 172.16.95.255
    ether 00:50:56:c0:00:08
    vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet 192.168.179.1 netmask 0xffffff00 broadcast 192.168.179.255
    ether 00:50:56:c0:00:01

  • Very slow network speed

    Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
    the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!

    Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
    the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!

  • Very slow network connection via LAN or Wifi problem

    Hello,
    I am running Windows xp MCE version on my Macbook 2.2. I have a very bothersome problem with my network speed at work.
    When I run Windows on my Mac and connect to the network of my workplace using LAN or Wireless, I can surf the local websites and Email by a very nice speed but when I try to open any page outside the companies website, it is very slow or sometime it does not even open it. In status bar it says "Waiting for www...".
    I tried almost everything. The problem does not come from my firewall(I even unistalled it). My network setting are like everybody else. I dissabled the auto Comunication speed. nothing seems to help.
    It seems to me that this is a problem with windows on Macbook.
    I was wondering has anybody a similar problem?
    Does anybody has any solution for that?
    Thanks

    Hello,
    I am running Windows xp MCE version on my Macbook 2.2. I have a very bothersome problem with my network speed at work.
    When I run Windows on my Mac and connect to the network of my workplace using LAN or Wireless, I can surf the local websites and Email by a very nice speed but when I try to open any page outside the companies website, it is very slow or sometime it does not even open it. In status bar it says "Waiting for www...".
    I tried almost everything. The problem does not come from my firewall(I even unistalled it). My network setting are like everybody else. I dissabled the auto Comunication speed. nothing seems to help.
    It seems to me that this is a problem with windows on Macbook.
    I was wondering has anybody a similar problem?
    Does anybody has any solution for that?
    Thanks

  • Very Slow network Timing

    My G4 is not handling the web too smoothly. It seams to be very slow on the net. Any ideas on how to speed it up?

    Hi!
    Are you running through a router to the modem? If you're using Mail on a POP account, how's that running? Any dropped connections that you're aware of? Did you use the same service and modem on the G3, and if so, was it satisfactory there? How's the connection while using Safari?
    You might launch Console from the Utilities folder and review your system and console logs, matching the time of the slowdowns to the entries in those logs which occured at about the same time. The entries there could provide a clue to the problem.
    Regarding the use of the G3's OS X install with the G4, this could have an impact on this and on other things as well... The computers are significantly different models, and as I understand it, the OS installs drivers tailored to the Mac it is installed on. It's best to install new onto the Mac that the OS is being used to avoid problems, using the OEM install disc which was shipped with a particular Mac model, which includes drivers tailored to it, or using a retail version of the install disk, which has universal drivers available.
    I've encountered a few DSL issues over the past few years. One was a failing router problem; another was an outside line problem, with outside telephone line interference causing data disruption and resulting in dropped connections and slow browser loads. The Ameritech DSL folks lowered the connection speed just a hair, and the problem disappeared. The other was a crossed wiring connection with a second, unused inside line, which caused an unfiltered phone/DSL line situation. Proper filtering corrected this.
    Gary
    1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30   Mac OS X (10.4.5)   5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

  • Very slow network file transfer speeds with WRT310 + Powerline PLS300

    Hi guys-Thanks for looking!
    I have Charter hi-speed (10MBS) with my wireless N router (WRT310).  Connected to my router is the PLE300 Linksys powerline adapter.  I have two PLS300 powerline adapters.  One feeds my computer and my wife's computer in the den and the other feeds the playstation, xbox, NAS Black Armor media server in the media room. 
    In running speed tests online, I get >10 MBS on both ends of the powerline adapters so surfing the internet is very fast on both ends.  I also have very fast file transfers from my wife's computer to my computer across the same PLS300 adapter
    However, in transfering files to my media server from my computers, I get speeds of 500 kbs.  If I try to stream video files (non-HD) to my PS3, the video stutters to where it is unwatchable.  I have also tried to bypass the powerline adapter by just using a wireless N gaming adapter and that yielded similar slow results.
    I am running Windows 7 on both computers.  I have removed the firewalls and McAfee. 
    Again, thanks for looking and happy new year!

    Reduce the MTU to 1350 on the router and check if that helps...

  • Very slow network file transfer speeds

    We just moved and I've now connected our imac and macbook to our network.  This time rather than running cables I thought we'd run the imac and the macbook off of our airport extreme.  After a bit of repositioning and fiddling I've got a strong signal throughout the house and the internet connection is great.  The problem I'm having though is network file transfers are really, really slow.  I can't get anything over 2MB/sec on either mac, and it is way slower on the macbook than it was previously.  From NetStat it looks like there are some bad connections and overflows, is there anything here that might point to a problem?  Thanks in advance for any suggestions.  NetStat results for tcp:
    tcp:
              2008646 packets sent
                        493362 data packets (220223075 bytes)
                        614 data packets (581572 bytes) retransmitted
                        0 resends initiated by MTU discovery
                        1209277 ack-only packets (660 delayed)
                        0 URG only packets
                        0 window probe packets
                        287951 window update packets
                        17519 control packets
                        0 data packets sent after flow control
              4266748 packets received
                        445311 acks (for 219872269 bytes)
                        6482 duplicate acks
                        0 acks for unsent data
                        3963598 packets (916287602 bytes) received in-sequence
                        833 completely duplicate packets (462217 bytes)
                        21 old duplicate packets
                        0 packets with some dup. data (0 bytes duped)
                        41154 out-of-order packets (54419239 bytes)
                        0 packets (0 bytes) of data after window
                        0 window probes
                        778 window update packets
                        388 packets received after close
                        0 bad resets
                        2 discarded for bad checksums
                        0 discarded for bad header offset fields
                        0 discarded because packet too short
              10085 connection requests
              322 connection accepts
              11 bad connection attempts
              21 listen queue overflows
              7976 connections established (including accepts)
              10720 connections closed (including 654 drops)
                        385 connections updated cached RTT on close
                        385 connections updated cached RTT variance on close
                        99 connections updated cached ssthresh on close
              2218 embryonic connections dropped
              444482 segments updated rtt (of 414903 attempts)
              2348 retransmit timeouts
                        61 connections dropped by rexmit timeout
                        0 connections dropped after retransmitting FIN
              4 persist timeouts
                        0 connections dropped by persist timeout
              39 keepalive timeouts
                        0 keepalive probes sent
                        29 connections dropped by keepalive
              11651 correct ACK header predictions
              3699704 correct data packet header predictions
              37 SACK recovery episodes
              176 segment rexmits in SACK recovery episodes
              228486 byte rexmits in SACK recovery episodes
              1598 SACK options (SACK blocks) received
              35961 SACK options (SACK blocks) sent
              0 SACK scoreboard overflow

    help?

  • Slow Network transfer

    I've just added a second Time Capsule to my home network as my first one is now pretty full. Its extended my network fine and I've renamed the TimeCapsule fine. I left my Macbook pro to drop a 170Gb TimeMachine backup onto the new Time Capsule overnight. And it completed in 7 ish hours. So I know the access is ok.
    I have a number of files I don't back up as part of Time Machine (iso images) and VMWare images of my dev PCs. I was planning on copying these over onto the shared storage on the Time Capsule but the file transfer rate is shockingly slow, even for a single file. Just starting the copy of a single file (they are pretty big at a couple of Gb each) takes a couple of minutes and stopping it takes a good 5 minutes to close the progress dialog.
    A single 0.7Gb file was listed as taking 39 hours. Now I'm not sure what the data rate is but its obviously pretty slow. This is all via a wired 10Gb connection using a 3Com switch as the hub.
    Now copying the same file from the same Mac to the old Time Capsule completes in under a minute. So what have I done wrong to end up with this rather odd situation? Has anyone got any pointers as to what I might look at or poke/prod to sort this out?
    many thanks
    Steve

    I left my Macbook pro to drop a 170Gb TimeMachine backup onto the new Time Capsule overnight. And it completed in 7 ish hours. So I know the access is ok.
    That is slow if that is over 10GB ethernet. The TC should do around 60GB/hr for backup.. so something isn't right even with what is apparently ok.
    A single 0.7Gb file was listed as taking 39 hours.
    That is very bad.
    I know it is a pain.. but I want you to pull the New TC out of the network.
    Plug it directly into the computer by ethernet.
    Do a factory reset on it. Very little else.. you are doing a file copy in full isolation from the network.
    Make sure you are copying the file to new directory you create under the root..
    Tell us the speed of transfer. (Also check that ethernet connected at gigabit.. you will see connect speed in network preferences or ifconfig in a terminal) And you can use activity monitor to check the file transfer speed.
    Super slow.. take the TC back.. it is faulty. There seems to be a lot of it going around.

Maybe you are looking for

  • Pricing procedure issue ..

    Hi Expert, I have assigned pricing procedure to sales org. 1500 so that i am able to create sales order through VA01. I have assigned it through view V_T683V. Now i want to create MAM order in sales org. 1500 but at the time of creation i am getting

  • Solaris 10 64-bit for intel processor

    Hi ALL, I want to install solaris 10 64-bit on vmware for test purpose. Do you know where I can find it. It seem that on the site we can only download x86 or sparc Thanks in advance

  • Explorer 5.0 Scrapbook files to view in a later version IE 5.2 on a G5

    I have a number of Web Archive files that I created from using the Scrapbook feature in MS Explorer 5.0 while using an old Mac PPC. I was looking for a way to successfully transfer and access my MS Explorer(v. 5.0) Web Archive files from this old Mac

  • Site won't follow CSS rule, horizontal line colour.

    Hi, I have made a CSS syle:- .hr {   border:0;   border-top: 1px solid #840017;   height: 0;   background: #840017; This makes a horizontal line to act as a break.  But in FF and IE it comes out grey and not claret (#840017) Any ideas what I have don

  • Multiple copies on LR3 import

    I have a new computer with LR3 installed. An import of files from a prior back up loaded as many as 28 copies of pictures with a CR2 original. Any idea why and if I can just delete the addtionals?