Very slow performance in Lightroom 3??

I just upgraded to Lightroom  3.0 and I am very suprised how slow it is!?!  I don't have a very large library and I'm on two reasonably new computers yet the difference from Lightroom 2 (snappy performance) to Lightroom 3 (VERY sluggish) is quite suprising..
I'm using it on a XP and a Vista system with the same results...
Is anyone else experiencing this???
Thanks,
Ken

I've noticed a slow down in performance with Lightroom 3 as well. As far a looking around the forum for older threads, ...found older lightroom 1 and 2 threads.
Your Title "Very Slow Performance in Lightroom 3??" fits what I'm looking for just perfectly.
Jim

Similar Messages

  • Acrobat very Slow performance (50% CPU usage)

    My acrobat 9 PRO (9.3.2) has suddently started to use 50% of my CPU usage everytime a *.pdf document is opened.
    It is the task Acrobat.exe which is the problem. This results in VERY slow performance and I cannot use the review function without adobe is crashing!
    This has not always been a problem!
    Does anyone know why this is happening?
    I have tried to uninstall and reinstall acrobat, without any luck!
    Thanks
    Peder

    You probably have the same problem as I do. I use version 9.3.3 on a fairly powerful machine with Windows vista. In my case, the problem is related to the weblink.api (http://forums.adobe.com/thread/675941?tstart=0). I also uninstalled, reinstalled, repaired - nothing helps.

  • Lion: very slow performance of my macbook pro

    very slow performance.
    went to terminal, did the top command, and got following results (mind you, ONLY have Safari and of course Terminal open):
    Processes: 96 total, 4 running, 9 stuck, 83 sleeping, 419 threads      19:07:17
    Load Avg: 1.99, 1.81, 1.59  CPU usage: 2.36% user, 5.21% sys, 92.41% idle
    SharedLibs: 1660K resident, 0B data, 0B linkedit.
    MemRegions: 15947 total, 2662M resident, 47M private, 209M shared.
    PhysMem: 695M wired, 2175M active, 1083M inactive, 3953M used, 13M free.
    VM: 250G vsize, 1093M framework vsize, 699065(68) pageins, 1724738(881) pageouts
    Networks: packets: 70104/55M in, 66648/10M out.
    Disks: 966630/9347M read, 327765/18G written.
    PID   COMMAND      %CPU  TIME     #TH  #WQ  #POR #MREG RPRVT  RSHRD  RSIZE
    4058  top          5.2   00:03.32 1/1  0    28   29    912K   216K   1620K
    4055  bash         0.0   00:00.02 1    0    20   23    356K   216K   1112K
    4052  CVMCompiler  0.0   00:00.30 1    0    30   69    7780K  220K   16M
    4051  login        0.0   00:00.08 2    1    33   63    928K   216K   2184K
    4049  Terminal     0.3   00:01.34 7    3    128+ 164+  7580K+ 13M    15M+
    4042  ocspd        0.0   00:00.02 1    0    26   33    420K+  276K   1376K+
    4041  WebProcess   0.0   00:04.35 7    3    119  201   16M-   10M    26M-
    4039  Safari       1.1   00:09.44 12   3    193  413   47M-   20M    81M-
    3958  spindump_age 0.0   00:00.02 2    2    38   55    356K   220K   1100K
    3956  spindump     1.3   00:42.93 16/1 13   228  145   46M+   15M    53M+
    3953  aosnotifyd   0.0   00:00.18 3    1    53   279   2064K  3532K  6156K
    3939  AddressBookM 6.8   06:59.11 4    1    68   4067+ 2131M- 3308K  1554M-
    3895  lsboxd       0.0   00:00.06 2    2    49   69    1156K  6820K  3292K
    3031  cookied      0.0   00:01.36 2    1    42   82    2028K  268K   3
    every minute or so the computer blocks, every 3 or 4 hours I have to restart etc.
    any suggestions?

    ok, stopped syncing in System preferences and even (horror) deleted the file which reappeared in seconds.
    now waiting to see if stopping the syncing helps - though computer is now working a bit better, the info on Activity Monitor would indicate it is not a real improvement
    473           AddressBookMobileMeSharingAgent          me          1,4          4          1.020,0 MB          Intel (64 bit)
    312           helpd          me          0,4          65          358,9 MB          Intel (64 bit)
    0           kernel_task          root          1,1          76          336,6 MB          Intel (64 bit)
    459           Mail          me          0,4          9          276,2 MB          Intel (64 bit)
    194           java          root          0,1          30          162,4 MB          Intel (64 bit)
    405           Safari          me          0,5          12          120,0 MB          Intel (64 bit)
    407           Safari Web Content          me          0,2          7          100,3 MB          Intel (64 bit)
    195           WindowServer          _windowserver          0,5          7          64,4 MB          Intel (64 bit)

  • InDesign CC 2014 very slow performance when dragging images and changing text

    InDesign CC 2014 very slow performance when dragging images and changing text.
    Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

    Have exact same issue on  my Windows 7 machine. Resetting preferences is a workaround.
    So I start InDesign whilst holding down these keys.
    Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
    Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
    I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

  • E50 very slow performance

    my E50 is giving very slow performance anyway to tune it up ?? dosn't hangs but its slow ?? any solution ps whats the best antivirus to install in E50 ?

    I don't use your same workflow, and I assume you're shooting RAW. However,  after I have built 1:1 previews in LR (which takes a LONG time), when I click on a file to decide if it's sharp or not, it still takes 5-10 seconds for each file to load. And my computer isn't slow, and I have the same issue on my laptop, which is new and fast. I haven't seen a satisfactory answer to this problem, nor much acknowledgement from Adobe. My files are from a Nikon D7100 with 24 megapixels, so the file size is likely a factor.
    If you are shooting the type of subjects where you use 1:1 previews primarily to determine sharpness, you could consider Photo Mechanic (unfortunately it costs $150) as the first step in your workflow. It uses the embedded jpg files in the RAW file, so it loads 1:1 jpg previews almost instantly. Sports and nature photographers use this product all the time, mostly to delete losers.

  • Formatted Search with DI  leads to a very slow performance - HELP....

    Hello There
    I have defined some formatted search in OPCH - everything is working fine.
    I have added some logic to this form via the DI.(handlling 1 item press_event), and I get a very very slow performance - the ADDON-EXE jumps TO 230MEGA of memory, and entering values to each row in the tables/item in the form takes about 15 seconds.
    Any suggestions?
    RGDS
    HAGAI

    Hi Hagai,
    Normally an addon written using the DI would take up 60-80MBs.
    Are you filtering out all events except for the item press event for the form? If you are not filtering events then this can have quite a drastic affect on performance.
    What logic have you got behind the press event? If the addon exe is ballooning out to 230MB then it suggests that there is either a problem with a memory leak or that an error is occuring in the code. I would recommend putting try/catch clauses at suitable places in the code and maybe specifically setting objects to null and calling the .NET garbage collector to try and minimise the potential for memory leaks.
    Are you sure that it is the combination of the formatted search and the addon that is causing the problem, i.e. if you take away the formatted search but leave the addon do you still get poor performance or does everything speed up?
    Hope this helps,
    Owen

  • Very slow performance, need assistance

    I have a program that has very slow performance (and I mean SLOW).  I was hoping somebody could tell me how to improve the performance.  I know where it hangs up (at LOOP AT it_detail INTO wa_detail.) but I'm not sure what I need to do to make it quicker.  Any help would be appreciated.
    TABLES: vbak,
            vbpa,
            adrc.
    TYPES: BEGIN OF ty_detail,
             vbeln TYPE vbak-vbeln,
             erdat TYPE vbak-erdat,
             vdatu TYPE vbak-vdatu,
             adrnr TYPE vbpa-adrnr,
             sa_name TYPE adrc-name1,
             sa_street TYPE adrc-street,
             sa_city TYPE adrc-city1,
             sa_state TYPE adrc-region,
             sa_zip TYPE adrc-post_code1,
             sa_tel TYPE adrc-tel_number,
             kunnr TYPE vbpa-kunnr,
             ag_name TYPE kna1-name1,
             ag_street TYPE kna1-stras,
             ag_city TYPE kna1-ort01,
             ag_state TYPE kna1-regio,
             ag_zip TYPE kna1-pstlz,
             ag_tel TYPE kna1-telf1,
             vkbur TYPE knvv-vkbur,
             we_num TYPE likp-kunnr,
             we_name TYPE kna1-name1,
             we_name2 TYPE kna1-name2,
             we_street TYPE kna1-stras,
             we_city TYPE kna1-ort01,
             we_state TYPE kna1-regio,
             we_zip TYPE kna1-pstlz,
             we_tel TYPE kna1-telf1,
           END OF ty_detail.
    DATA: it_detail TYPE TABLE OF ty_detail WITH KEY vbeln adrnr kunnr we_num,
          wa_detail LIKE LINE OF it_detail.
    DATA: addressnum TYPE vbpa-adrnr,
          temp_kunnr TYPE likp-kunnr.
    * S E L E C T I O N - S C R E E N
    SELECTION-SCREEN BEGIN OF BLOCK required WITH FRAME TITLE text-002.
    SELECT-OPTIONS:  s_vdatu FOR vbak-vdatu OBLIGATORY.    "Req delivery date
    SELECTION-SCREEN END OF BLOCK required.
    SELECTION-SCREEN BEGIN OF BLOCK temp WITH FRAME TITLE text-001.
    SELECT-OPTIONS:  s_auart FOR vbak-auart OBLIGATORY.
    PARAMETER:  p_parfun TYPE vbpa-parvw DEFAULT 'Z5' OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK temp.
    *INITIALIZATION.
    *  REFRESH s_auart.
    *  CLEAR s_auart.
    *  s_auart-sign = 'I'.
    *  s_auart-option = 'EQ'.
    *  s_auart-low = 'OR'.
    *  APPEND s_auart.
    *  s_auart-low = 'ZDT'.
    *  APPEND s_auart.
    * END OF SELECTION SCREEN
    * M A I N - B O D Y
    *Main select statement.
    SELECT a~vbeln a~erdat a~vdatu c~adrnr c~kunnr
        INTO CORRESPONDING FIELDS OF TABLE it_detail
        FROM vbak AS a
          INNER JOIN vbap AS b
              ON b~vbeln = a~vbeln
          INNER JOIN vbpa AS c
              ON c~vbeln = b~vbeln
    *          AND c~posnr = b~posnr
                   WHERE a~auart IN s_auart
                   AND a~vdatu IN s_vdatu
                   AND c~parvw = p_parfun.
    LOOP AT it_detail INTO wa_detail.
      SELECT SINGLE name1 street city1 region post_code1 tel_number
          FROM adrc INTO (wa_detail-sa_name, wa_detail-sa_street, wa_detail-sa_city, wa_detail-sa_state,
                            wa_detail-sa_zip, wa_detail-sa_tel)
          WHERE addrnumber = wa_detail-adrnr.
      SELECT SINGLE name1 stras ort01 regio pstlz telf1
          FROM kna1 INTO (wa_detail-ag_name, wa_detail-ag_street, wa_detail-ag_city, wa_detail-ag_state,
                            wa_detail-ag_zip, wa_detail-ag_tel)
          WHERE kunnr = wa_detail-kunnr.
      SELECT SINGLE c~kunnr INTO temp_kunnr
          FROM vbpa AS a
              INNER JOIN lips AS b
                ON b~vgbel = a~vbeln
              INNER JOIN likp AS c
                ON c~vbeln = b~vbeln
                WHERE a~vbeln = wa_detail-vbeln.
      wa_detail-we_num = temp_kunnr.
      SELECT SINGLE name1 name2 stras ort01 regio pstlz telf1
          FROM kna1 INTO (wa_detail-we_name, wa_detail-we_name2, wa_detail-we_street, wa_detail-we_city, wa_detail-we_state,
                            wa_detail-we_zip, wa_detail-we_tel)
          WHERE kunnr = wa_detail-we_num.
      SELECT SINGLE vkbur FROM knvv INTO wa_detail-vkbur
          WHERE kunnr = wa_detail-kunnr.
      MODIFY it_detail FROM wa_detail.
    ENDLOOP.
    PERFORM display.
    INCLUDE zpartner_displayf01.
    Regards,
    Davis

    Hi Davis,
      The culprit is the select inside the loop.
    YOu should use for all entries instead .
    I will show for one select, you do similar thing for others:
      SELECT addrnumber name1 street city1 region post_code1 tel_number
          FROM adrc INTO table itab_adrc
    for all entries in it_detail
          WHERE addrnumber = it_detail-adrnr.
    sort itab-adrc by addrnumber.
    LOOP AT it_detail INTO wa_detail.
    read table it_adrc with key addrnumber = wa_detail-adrnr.
    if sy-subrc = 0.
    move fiedls of it_adrc into wa_detail.
    endif.
    ENDLOOP.

  • Lightroom 5.5 Import from Catalog *very* slow performance.

    Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom.  It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
    Here are as many stats as I have:
    iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
    Master catalog has 117,000 images in it.
    The catalog I'm importing has 948 images in it.
    CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
    Lightroom is using 4.2G of RAM (10G free in activity monitor)
    Hard drive is fairly full, but still has 366G free on it (so about 10%)
    Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
    Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters).  Both are up to date with the latest OS software.
    How I did it was:
    Export the shoot as a new catalog on my iMac
    Transfer it to my laptop (smart previews only, no masters)
    Edit images, metadata, etc
    Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
    In my master catalog do an import from catalog
    Waited for ages for checking for dupes (which I can understand with such a big catalog)
    Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
    The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy.  In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range.  It's still working away, it's just crazy crazy slow.
    Anything to help out or debug would be greatly appreciated.  I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)? 
    Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate me

    Hi Jim,
    Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
    I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
    I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'.

  • Very, very slow performance

    Lightroom's performance on my computer has become, at times, intolerably slow.  After rebooting my iMac and not opening any other programs or browsers, it just took about eight minutes to import 23 files, and a few more minutes to build 1:1 previews.  When things are running fine this might take one minute.  (I always build 1:1 previews on import and this happens with recently imported files as well as older ones, so it's not a question of having to build previews on the fly.)  I've had extremely slow performance ("Loading") just moving from one photo to another in the Library and Develop modules or moving from one module to another, typically up to about 90 seconds, or when LR is "preparing the file" for export or edit in PS.  But not always -- sometimes it's quite zippy -- and there's no pattern that I can see.  Generally when this is occurring, memory "pressure" and CPU usage are normal, but it happens when usage is minimal as well.  Occasionally there is a spinning beach ball but not usually. 
    My catalog has about 30k photos and very few presets of any kind.  Probably 75% of these files have never been edited at all.  I don't make hundreds of local adjustment, rarely more than ten in one image.  I have about 40 Smart Collections with an average of several hundred images each.  I rarely use Smart Previews.  I optimize and back up the catalog every time I exit LR, which is a few times a week.  My file/folder structure is simple and clean:  /Pictures/year/day.
    I'm running LR 5.4 on a mid-2011 iMac, 3.4 GHz Intel Core i7, with 16GB of memory.  I have the Lightroom catalog and previews on the main drive, which is a 250GB SSD with about 100GB free.  (Problem happened when my catalog was on different internal drive, too.)  My pictures folder is on an internal drive with over 100GB available.  I have the maximum cache size set to 50GB.  I'm running Mavericks but it was just as slow under Mountain Lion.  It was just as slow in earlier versions of Lightroom, major and minor.  Other programs/apps run just fine on my computer, including Photoshop.  (Generally, LR's performance is the same whether or not PS is running.)  The only performance issue I've noticed since switching to Mavericks is that Finder stalls for several seconds every once in a while.
    I've seen this Lightroom problem referred to on various forums, including Adobe forums, for a long time now -- years -- and I've never seen a definitive fix.  I think I've answered all of the questions that are usually asked.  Is there any solution to this?  I use LR 30-40 hours per week.  I'm tearing my hair out and the option of moving to another program would be the very last resort, but I might have to do that. 

    I don't use your same workflow, and I assume you're shooting RAW. However,  after I have built 1:1 previews in LR (which takes a LONG time), when I click on a file to decide if it's sharp or not, it still takes 5-10 seconds for each file to load. And my computer isn't slow, and I have the same issue on my laptop, which is new and fast. I haven't seen a satisfactory answer to this problem, nor much acknowledgement from Adobe. My files are from a Nikon D7100 with 24 megapixels, so the file size is likely a factor.
    If you are shooting the type of subjects where you use 1:1 previews primarily to determine sharpness, you could consider Photo Mechanic (unfortunately it costs $150) as the first step in your workflow. It uses the embedded jpg files in the RAW file, so it loads 1:1 jpg previews almost instantly. Sports and nature photographers use this product all the time, mostly to delete losers.

  • Very slow 64 bit Lightroom Windows 7?

    I've recently switched over to Windows 7 64 bit Home Premium, running 8GB DDR3 RAM, 1GB ATI Radeon 4800 series video card, 1920px monitor and have found the performance in Lightroom 3.4.1 much slower than I did on Windows XP, 32 bit running 2GB of RAM with a 128MB motherboard card (laptop to boot).
    Why is this happening? The main issues are extremely slow imports (minimal previews set as default when importing), very delayed thumbnail (preview) rendering (the grid view sometimes sits with half the thumbnails rendered, and half not rendered, then all of a sudden, a minute or two later, all will be rendered...), and slow, in-consistent 1:1 rendering. I've tried all the different combos when it comes to preview rendering but nothing does the trick. I've even tried switching my 10GB ACR cache to different drives but nothing does the trick.
    Could this be an issue with the Catalyst Control Center (software controling my video driver)? It's all I've got left to consider but would very much like a resolution.
    Thanks in advance.

    Just to be clear, the 10GB cache is LR3's cache (not sure if it's the same as ACR cache...confusing!)

  • Fonction HR_INFOTYPE_OPERATION very slow performance in bacth job

    Hi all experts!
    Does any one having a problem with slow performance while using the fonction HR_INFOTYPE_OPERATION and running in batch mode for a big population of data ?
    I have tried to use          
        nocommit         = 'X' as parameter in the fonction HR_INFOTYPE_OPERATION
    and calling after each update.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
    And the performance is very long.
    I also remarque that if we run for a small population like less than 500 employees then it finish within 20 mins. But If I ran for a polulation of 5000 employees then it take more than 6 hours = 3600 mins. ?
    Thanks for your answer.
    Hugo Nguyen

    Call Function module 'HR_PSBUFFER_INITIALIZE' After each call to HR_INFOTYPE_OPERATION.
    Refer [link|http://brookshireconsulting.com/technical_update.html] for more information.
    I have tried it my own and it do improve the performance,.
    Hope this improves the performace for you as well.
    Regards
    Shital

  • Very slow performance; external boot drive the cause?

    Greetings.
    I bought a 500 GB Hitachi drive for my iMac intending to install it myself. But, alas, I have an iSight iMac and I think it's beyond my ability to do the job. A Mac dealer nearby can do it for me, but wants the computer for two or three days, even thought the installation takes about an hour. They will not make an appointment for me to come in with it and wait.
    So I installed it the drive in an OWC Mercury Elite case, cloned the original drive, and have been booting from the Hitachi via Firewire 400. Just about everything is running at well under previous speeds. Lightroom now takes as much as two to five minutes to spool a large file for printing and sometimes does not even send the file to the printer (in fairness, the latter issue happened sometimes with the internal drive – I wrote about it here before – but at least it didn't take a long time to spool the file, which has to happen each time I click "print" until at last it actually goes to the printer).
    I'm getting slow performance from Safari (4.1.3), Mail (2.1.3), Lighroom 2, Photoshop (CS3). I can't say I've noticed problems elsewhere, but I rarely use other applications.
    I have done all the usual maintenance tasks, besides those the computer does automatically. Repaired permissions. Emptied caches. Burned sage. Etc.
    If this is the inevitable result of running from an external disk, then I'll have to brave the installation or pay someone to do it (which I would do immediately if I knew someone who would do it "while-u-wait").
    If, however, this sounds like booting from the external drive should not be the problem, and there is something I might do to speed things up, I'd be grateful for your suggestions.
    As always, thank you.
    Leonard B.

    Too bad about the site redesign. I had a draft of this message started, then got busy. Now I have no idea where to look for it. (And what happened to the Preview function?)
    ANYWAY…  I talked to a tech person at Other World Computing about the problem. He was of the opinion that the iMac SHOULD be showing some slower response if booted from the external drive, but that maybe the sluggishness in this case was excessive. He had me run a hardware scan to see whether there were any bad blocks. After 24 hours, Speed Tools reported no problems. So now I have run every diagnostic and repair tool I know of and every one that was suggested (every one that I own, that is), and the computer is still hesitating so much that I just have to get up and walk away from it sometimes in order to stay sane.
    I am booting from the original hard drive when I have to do extended internet research (Safari being the biggest speed offender), but run the iMac from the external drive when I have to do photo editing, since all my preferences, Lightroom libraries, etc., are located there. If I had the time to figure out just where the essential, and relevant, system and application files are located, I suppose that I could copy them and move them onto the internal drive. Then I could just use the external for storage of the image files (can't do that on the internal; there's not enough space). However, if what is going on (slowness issue) is indicative of a faulty drive, I'd rather not use it at all, even as a storage or backup drive.
    Any thoughts? Do you suppose this might be a problem with the computer, not with the new drive? I'd hate to ask OWC to exchange it (even if they would do that) and then find out I've got the same trouble.
    Thanks again in advance.
    Leonard

  • Very slow performance running Mavericks - need troubleshooting help

    Hello folks:
    I have a MBP 2011 which was upgraded to Mavericks from Mountain Lion about 6 weeks ago. Since then I have had a major performance drop - slow machine, very slow window renderings, etc. I know a number of people have been facing these issues and have been recommended to clean up 3rd party extensions/agents. I ran Etrecheck (report below) and I need some help with fixing the failed kernel extensions and launch daemons. Thanks much!
    Pavan
    Hardware Information:
      MacBook Pro (13-inch, Late 2011)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 1.9 - SDK 10.9
      AppleAVBAudio: Version: 2.0.0 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
      OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
    Disk Information:
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information:
      Western Digital My Book 1148 3 TB
      EFI (disk4s1) <not mounted>: 209.7 MB
      disk4s2 (disk4s2) <not mounted>: 3 TB
      Boot OS X (disk4s3) <not mounted>: 134.2 MB
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Memorex TRAVELDRIVE 005B 16.01 GB
      EFI (disk2s1) <not mounted>: 209.7 MB
      Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Kernel Extensions:
      com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)
    Problem System Launch Daemons:
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.installd.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Problem System Launch Agents:
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist
      [loaded] com.adobe.versioncueCS3.plist
      [loaded] com.barebones.textwrangler.plist
      [loaded] com.cisco.anyconnect.vpnagentd.plist
      [loaded] com.google.keystone.daemon.plist
      [loaded] com.microsoft.office.licensing.helper.plist
      [loaded] com.oracle.java.Helper-Tool.plist
      [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
      [loaded] com.cisco.anyconnect.gui.plist
      [loaded] com.google.keystone.agent.plist
      [loaded] com.oracle.java.Java-Updater.plist
      [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
      [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
      [loaded] com.google.Chrome.framework.plist
    User Login Items:
      Flux
      iTunesHelper
      Google Drive
      Google Chrome
      AdobeResourceSynchronizer
    3rd Party Preference Panes:
      Flash Player
      Java
    Internet Plug-ins::
      o1dbrowserplugin: Version: 4.9.1.16010
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.2.0.49
      Loki: Version: 3.0
      net.juniper.DSSafariExtensions: Version: (null)
      RealPlayer Plugin: Version: Unknown
      FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
      DivXBrowserPlugin: Version: 1.3
      Silverlight: Version: 5.1.20513.0 - SDK 10.6
      Flash Player: Version: 11.9.900.170 - SDK 10.6
      AmazonMP3DownloaderPlugin: Version: Unknown
      googletalkbrowserplugin: Version: 4.9.1.16010
      npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
      iPhotoPhotocast: Version: 6.0
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
      JavaAppletPlugin: Version: Java 7 Update 45
    User Internet Plug-ins::
      Picasa: Version: 1.0
      Google Earth Web Plug-in: Version: 7.1
    Bad Fonts:
      None
    Old applications:
      Audacity: Version: 1.3.14.0 - SDK 10.4
      /Applications/Audacity/Audacity.app
      Hugin: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/Hugin.app
      Keynote: Version: 5.3 - SDK 10.5
      /Applications/iWork '09/Keynote.app
      Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
      Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
      /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
      Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
      Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
      Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
      Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
      Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Document Connection.app
      Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
      Microsoft Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Excel.app
      Microsoft Graph: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
      Microsoft Language Register: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
      Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
      Microsoft Outlook: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Outlook.app
      Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
      Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
      Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
      Microsoft Word: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Word.app
      My Day: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/My Day.app
      Open XML for Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
      PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/PTBatcherGUI.app
      Picasa: Version: 3.9.16 - SDK 10.4
      /Applications/Picasa.app
      SLLauncher: Version: 1.0 - SDK 10.5
      /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
      Solver: Version: 1.0 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
      Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
      /Applications/Spotify.app
      SyncServicesAgent: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
      calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/calibrate_lens_gui.app
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
      Destinations:
      Gasolina [Local] (Last used)
      Total size: 3 
      Total number of backups: 18
      Oldest backup: 2013-07-09 19:11:24 +0000
      Last backup: 2013-12-13 19:35:36 +0000
      Size of backup disk: Excellent
      Backup size 3  > (Disk size 697.84 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          22% storeagent
          2% WindowServer
          1% backupd
          1% Google Chrome
          1% EtreCheck
    Top Processes by Memory:
      119 MB Google Chrome
      102 MB Google Chrome Helper
      82 MB mds_stores
      57 MB Finder
      33 MB WindowServer
    Virtual Memory Statistics:
      45 MB Free RAM
      792 MB Active RAM
      748 MB Inactive RAM
      1.06 GB Wired RAM
      37.63 GB Page-ins
      1.98 GB Page-outs

    Here’s your report with some comments:
    Hardware Information:
      MacBook Pro (13-inch, Late 2011)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 1.9 - SDK 10.9
      AppleAVBAudio: Version: 2.0.0 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
      OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
    Disk Information:
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information:
      Western Digital My Book 1148 3 TB    WD drives are one of the worst things that can happen to a mac. They have software on the drive and also in the firmware of the drive enclosure that is incompatible with Mavericks. The software that they also want you to install on your mac (to run the drive with the shitware on it that is incompatible with Mavericks) is also incompatible with Mavericks. The best thing to do with this drive is to open it and remove the hard drive and put it into a new (non-WD) enclosure. Then smash the WD enclosure into little bits with a sledgehammer and mail it back to WD.
      EFI (disk4s1) <not mounted>: 209.7 MB
      disk4s2 (disk4s2) <not mounted>: 3 TB
      Boot OS X (disk4s3) <not mounted>: 134.2 MB
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Memorex TRAVELDRIVE 005B 16.01 GB
      EFI (disk2s1) <not mounted>: 209.7 MB
      Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Kernel Extensions:
    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)     This would be part of the shitware that you installed from WD. I would  uninstall the WD application that installs this driver. If the driver is still there after that, I'd look for the extension in /System/Library/Extensions and delete it from there. This may have damaged your kernel, though. If your performance is not improved after removing the WD app and this extension, you should probably back up your documents, erase your HD, and do a clean reinstall of Mavericks.
    Problem System Launch Daemons:
    [failed] com.apple.AOSNotificationOSX.plist    
    [failed] com.apple.installd.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist    These four are all apple software. I would try repairing your hard drive: Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery . Then restart, reassess your mac’s performance, and rerun Etrecheck. If that doesn’t work, I’d reinstall Mavericks over your current installation. If that doesn’t work, I’d do a clean install.
    Problem System Launch Agents:
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist
      [loaded] com.adobe.versioncueCS3.plist
      [loaded] com.barebones.textwrangler.plist 
      [loaded] com.cisco.anyconnect.vpnagentd.plist
      [loaded] com.google.keystone.daemon.plist    spyware from google
      [loaded] com.microsoft.office.licensing.helper.plist
      [loaded] com.oracle.java.Helper-Tool.plist
      [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
      [loaded] com.cisco.anyconnect.gui.plist
    [loaded] com.google.keystone.agent.plist
      [loaded] com.oracle.java.Java-Updater.plist
      [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
    [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist   see the suggestions above.
    [loaded] com.google.Chrome.framework.plist    This is why I prefer Safari. It doesn’t install all this extra junk.
    User Login Items:
      Flux
      iTunesHelper
    Google Drive   Last I heard Google drive was incompatible with Mavericks.
      Google Chrome
      AdobeResourceSynchronizer
    3rd Party Preference Panes:
      Flash Player
      Java
    Internet Plug-ins::   Way too many of these. If you have poor browser performance, get rid of these, and then only reinstall ones you absolutely need, and make sure they are mavericks compatible and up-to-date.
      o1dbrowserplugin: Version: 4.9.1.16010
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.2.0.49
      Loki: Version: 3.0
      net.juniper.DSSafariExtensions: Version: (null)
      RealPlayer Plugin: Version: Unknown
      FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
      DivXBrowserPlugin: Version: 1.3
      Silverlight: Version: 5.1.20513.0 - SDK 10.6
      Flash Player: Version: 11.9.900.170 - SDK 10.6
      AmazonMP3DownloaderPlugin: Version: Unknown
      googletalkbrowserplugin: Version: 4.9.1.16010
      npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
      iPhotoPhotocast: Version: 6.0
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
      JavaAppletPlugin: Version: Java 7 Update 45
    User Internet Plug-ins::
      Picasa: Version: 1.0
      Google Earth Web Plug-in: Version: 7.1
    Bad Fonts:
      None
    Old applications:
      Audacity: Version: 1.3.14.0 - SDK 10.4
      /Applications/Audacity/Audacity.app
      Hugin: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/Hugin.app
      Keynote: Version: 5.3 - SDK 10.5
      /Applications/iWork '09/Keynote.app
      Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
      Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
      /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
      Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
      Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
      Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
      Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
      Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Document Connection.app
      Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
      Microsoft Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Excel.app
      Microsoft Graph: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
      Microsoft Language Register: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
      Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
      Microsoft Outlook: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Outlook.app
      Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
      Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
      Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
      Microsoft Word: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Word.app
      My Day: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/My Day.app
      Open XML for Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
      PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/PTBatcherGUI.app
      Picasa: Version: 3.9.16 - SDK 10.4
      /Applications/Picasa.app
      SLLauncher: Version: 1.0 - SDK 10.5
      /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
      Solver: Version: 1.0 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
      Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
      /Applications/Spotify.app
      SyncServicesAgent: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
      calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/calibrate_lens_gui.app
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
      Destinations:
      Gasolina [Local] (Last used)
      Total size: 3
      Total number of backups: 18
      Oldest backup: 2013-07-09 19:11:24 +0000
      Last backup: 2013-12-13 19:35:36 +0000
      Size of backup disk: Excellent
      Backup size 3  > (Disk size 697.84 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          22% storeagent
          2% WindowServer
          1% backupd
          1% Google Chrome
          1% EtreCheck
    Top Processes by Memory:
      119 MB Google Chrome
      102 MB Google Chrome Helper
      82 MB mds_stores
      57 MB Finder
      33 MB WindowServer
    Virtual Memory Statistics:
      45 MB Free RAM
      792 MB Active RAM
      748 MB Inactive RAM
      1.06 GB Wired RAM
      37.63 GB Page-ins
      1.98 GB Page-outs  This is the highest amount of page-outs I have ever seen. I'd get rid of Chrome and Google Drive. Dropbox works fine and doesn't screw up my mac.

  • Smart collection very slow (performance)

    I have a problem with the Smart Collection. They are very slow in 3.2
    I did a little test and compared 2.7 with 3.2 with the same catalog.
    In 2.7 catalog all the smart collections are very fast.
    So I have the same catalog with the same smart collections. Often they take 5 - 10 seconds when clicked the first time.
    Even a Smart collection yielding 2 images can take up to 5 - 10 seconds.
    This is the Smart Collection
    Name:              Testing
    Match:             All
    Field:               Filename
    Expression:     contains
    Value              ANH_20090331_4253.JPG,ANH_20090331_4254.JPG,
    This should result in 2 image. The full names are given.
    In LR 2.7 the results are there in a split of a second. In 3.2 the first time you click on it it takes 5 - 10 seconds. The processor goes to 50% all the time.
    Even a normal collection (not smart collections) with 97 images takes more than 5 seconds when clicked. This is very slow.
    The second time it is within a second. But clicking another "difficult smart collection" and returning, then again it takes 5 - 10 seconds.
    For the record:
    Lightroom version: 3.2 [692106]
    Operating system: Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Version: 5.1 [2600]
    Application architecture: x86
    System architecture: x86
    Physical processor count: 2
    Processor speed: 2,9 GHz
    Built-in memory: 2047,0 MB
    Real memory available to Lightroom: 716,8 MB
    Real memory used by Lightroom: 150,8 MB (21,0%)
    Virtual memory used by Lightroom: 148,0 MB
    Memory cache size: 62,4 MB
    System DPI setting: 96 DPI
    Displays: 1) 1280x1024
    Serial Number: 116040017934919748523304
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.2
    Library Path: D:\Lightroom\FotoDatabase\FotoDatabase-3.lrcat
    Settings Folder: C:\Documents and Settings\Dick\Application Data\Adobe\Lightroom

    Smart collections are really slow for me also.
    It takes well over two minutes to populate the collection's images counts when first starting lightroom.  I have approx 80 smart collections, some quite complex, but even so, this seems very slow.  Once the inital counts have populated, showing the images is reasonably fast.
    The rest of LR is pretty fast, SC's are the only thing that bothers me.
    Using LR 3.3RC, high end PC:
         Win7x64
         i7/860
         16GB RAM
         SSD for boot
         SSD for LR
         45,000 images in catalogue
    Mike

  • Very slow performance transaction KKA2 - result analysis

    Hi
    I am running T.code: KKA2. The performance is very slow. What could be the possible causilities?
    Regards
    Uday

    Hi
    How to close or delete a thread?
    Regards
    Odaiah Pelley

Maybe you are looking for

  • Questions regarding TARGET DATA of a selection set and usage of extracts

    1. In iSetup Users Guide (121azug.pdf), pg5-4, under 'Viewing a Selection Set', it has the following lines: Supports Update: If the data object updates the target data during load, then the Support Update flag appears There is no explanation on "targ

  • FORM 16 NOT DISPLAYING IN PORTAL

    Hi Experts,                   I have encountered this error when trying to run form 16 in the portal, ( Screen output without connection to user.                           , error key: RFC_ERROR_SYSTEM_FAILURE   ) am only unable to run dis particular

  • Where is low battery warning in Mountain Lion?

    Lion used to give low battery power alerts which I do not find after Mountain lion upgrade. Is it still there or...???

  • Opening a RAW socket - how to become superuser to do so ?

    Hi, I'm writing my first test application, so I thought I'd convert an easy known quantity like ping. My problem here seems to be that to open a RAW socket I need to have a UID of 0, and I haven't got that or can I set it. So how is it done ? My vari

  • Using Bluetooth with Widcomm driver on PC

    I know that NI states that they only support BT devices that work with Microsoft driver. I am creating a BT "Hands Free" device but the MS drivers don't support the required functionality. Is there any way to hook the LV BT functions into Widcomm dri