Very slow response when working in MIDI

no matter what the action is my app is responding painfully slow when i work in midi. is there anyway i can optimize performance? the app responds about 20 secs late! agh!

Thank You! Thank You! Thank You! Thank You!
Removing RIghtZoom worked for me!
I only had it installed because I don't like the way windows in OS X don't fully maximize like windows. I much prefer Illustrator to work than have full screen... plus photoshop tool selection is much faster as well.

Similar Messages

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Random users getting very slow response when opening messages/attachments or sending email

I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
They see the spinning wheel and sit there until it decides to open or send. If the message is opened and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

Hi,
How about OWA?
If OWA works well, it seems an issue on the Outlook client side.
Please try to run Outlook under safe mode and re-create profile for testing.
Any related error/warning/information message left in App Log?
Also consider the network Bandwidth.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Table contained in a topic causes slow response when working with source

I am using RoboHelp V8.0.2 (I have applied the two fixes available from the Adobe product site).
Here is my issue:
I am documenting a product that has over 1,500 metrics.
I am trying to make a list of 1,077 metrics in one topic (all the metrics are of the same "type" so they are grouped together).
The table presenting these metrics has two columns, a Field Name column and a Description column.
There is not a lot of text within the table - most of the explanations and calculations are defined outside the table.
When I have more than about 400 table rows, the response time working with the topic in source is just horrible.
It took 3 minutes to open the topic in source, another 3 minutes to move the table over .425in from margin.
When I try to close the project, it gets hung up.
Has anyone else run into a problem working with tables within a topic?
I had a similar response time issue with V8.0.0 in general when I first installed it.
Once I installed the two fixes, that problem was (for the most part) eliminated.
I think the second fix specifically addressed response time issues when working in source.
I am going to try this on one of my other writer's machine to see if it is the age of my computer.
My computer setup is:
Dell Precision work station with an Intel Xeon 2.40GHZ processor and 2MB of RAM.
I am using Windows XP Professional 5.1.26 Service Pack 3.0.
I have a 110 GB hard drive with 18 GB available.
As always - thanks for any insight or information.
Michael F Weart

Hi Michael.
Interestingly the maximum number of rows you can use when you create a table via the Table > Insert > Table menu item is 100. That said, I've just created a 500 row table and whilst it is slower than a smaller table it is OK. I am also using RH 8.0.2 but on a higher spec PC.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Very slow response when selecting in Illustrator CS5 Mac

I am using Illustrator CS5 (15.0.1) on my brand new MacBook Pro with Core i5 processor and 8Gb Ram.
On this machine, Illustrator should behave very good, but when I do a selection of anything in an almost empty document, I get a beachball and have to wait a couple of seconds getting Illustrator to be responsive again.
This is very annoying.
This happens on anything I select (path, text, rectangle,...).
I have reinstalled the whole CS5 suite, but still the same problem.
Anyone got the same problem and know how to fix this.

Thank You! Thank You! Thank You! Thank You!
Removing RIghtZoom worked for me!
I only had it installed because I don't like the way windows in OS X don't fully maximize like windows. I much prefer Illustrator to work than have full screen... plus photoshop tool selection is much faster as well.

VERY Slow Respons When Changing Songs on iPod

My work computer is a Windows Vista machine, with Vista, SP 2 installed. I installed iTunes 8.2.0.23 this morning, upgrading from version 8.1.1.10. The new version works well when I play songs stored to the library on my hard drive, but I find that it has a VERY slow response when changing songs that I play from my iPod Touch. At one point, it took 17 seconds to change to the next song in the iPod's library. It changes instantaneously when I play songs from the library stored on my HDD. The iPod Software is version 2.2.1.
Can someone please offer insight?
Is there a way to download and install iTunes 8.1.1.10? I had no problems with that version.

Hi Ajrobin,
Welcome to Apple Discussions
[deleted because misread original post]
Jon
[btabz...funny...wait never... ;)]
Mac Mini 1.42Ghz, iPod (All), Airport (Origional & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..
Message was edited by: ~JB~

Bex input help (F4) very slow response times

When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option. We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help. We did not seem to have this problem before the upgrade to 2004s.
Anyone have any other ideas? The users are wanting it fixed.

F4 help behaviour has changed in 04s 3.5 web run time.
See attached thread for a solution (not very helpful in some cases.).
/thread/263372 [original link is broken]

VERY Slow Responses in iTunes When Deleting

Hi,
Can anyone help me with a problem of VERY slow responses in iTunes when I try to delete or amend track information. For example when I click on delete it can take several seconds or more to respond and again when I confirm the deletion or amendment.
I have had this problem for some time now and still occurs after a full re-install of the operating system (Leopard 10.5.8 on a PowerMac Quad processor and iTunes 10.6.3) All the remaining applications work fine just as they should do.
Blackrockguy

Does anyone have an answer for this question? Is there perhaps some outside plug-in that can help?

Very slow start up and very slow response

Hi guys,
SOS
My iMac is so slow to boot or start up. It takes about an 1-2 hours. It has very slow and very delayed response when doing tasks. I'm not sure what happened.
I have tried safe mode but it has not worked. I tried the disk utility but it was saying that my DVD (possibly because it is for snow leopard) is outdated. I think I updated to Lion.
Do you have any suggestions? I will try any other tricks. Do you recommend to back up before doing repair etc.?
thanks in advance!!

Tried to reset the RAM but did not get through. It went to disk utility again. Tried repair but it still saying to back up and restore files. Maybe the HD has been toasted. =(...
It says: Invalid key lenght. Volume Mac HD could not be verifried completely.. then it says Error: disk utilityu can't repair close back disk out, restoere etc..
In disk utillity as well, Mac OS X base system appeared- I dont know the purpose of this. It has some files on it. Dont know whether to restore it or what?..Mac HD seems like the it's empty..
Thanks again guys...It feels like I'm in a maze..

New OIF installation - Very slow response from OHS

Hi,
I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
If anyone here has any insight into this problem, please let me know.
Thanks,
Jim

Hi,
I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
Jim
======= POSTED to Application Server - General forum ============
I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
1) What's the effect of dms not working?
2) Is it possible to just disable dms?
I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
Jim

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Slow response when entering data to an empty cell?

Hey there...
I have this issue that when I start entering data into an empty cell or owerwriting one, the response is slow; when I press a button on the keyboard it takes roughly 1 second before anything visual happens in the cell, but when the data "makes it way through" the response is normal when hitting the keyboard.
Is anyone else experince a slow response when entering data to an empty cell in Number 09 or when overwriting one?/ Anyone familar with a similar issue, and is there anybody who knows how to fix this, or is it just normal for Numbers 09 to be a bit sluggish in the beginning when entering data?
I've recently swithced from Excel 2007 to Numbers 09, so sorry if the terminology is incorrect.

Question asked and answered several times.
Numbers was not coded by brains but by feet so, it behave sadly when the AutoSave Lion feature apply.
I posted a script getting rid of that.
Start from a template or duplicate the existing document just after opening it then close the original and work on the duplicate.
As it was never saved, AutoSave doesn't apply to it;
From time to time (say at least every ten minutes) call my script.
It wil duplicate the doc in progress and save it with a date_time stamped name.
this way, you will continue to enter datas in a never saved document.
Search for the string Auto_Save in the existing threads.
It's late and I'm too tired to search for you.
Yvan KOENIG (VALLAURIS, France) lundi 26 décembre 2011 12:03:51
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Very slow response when working in MIDI

Similar Messages

Maybe you are looking for