VERY Slow Responses in iTunes When Deleting

Hi,
Can anyone help me with a problem of VERY slow responses in iTunes when I try to delete or amend track information. For example when I click on delete it can take several seconds or more to respond and again when I confirm the deletion or amendment.
I have had this problem for some time now and still occurs after a full re-install of the operating system (Leopard 10.5.8 on a PowerMac Quad processor and iTunes 10.6.3) All the remaining applications work fine just as they should do.
Blackrockguy

Does anyone have an answer for this question? Is there perhaps some outside plug-in that can help?

Similar Messages

  • Very slow response when I click on a link, but almost instant response if I go back and click a second time.

    I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
    Sincerely,
    Al
    Version 26.0 Firefox, Windows XP, sp/3

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • VERY SLOW EVEN SYSTEM HANG WHEN RUNNING A REPORT URGENT HELP REQUIRED

    I am working on Oracle8 and i am running report3.0 with it. I have a Two-Tier Model.
    When I run a report then Server Response is
    very slow even Hang.But when I run the same
    Software on another machine it is very quick and not slow. What is the problem.
    Solution is required. Plese help in short time. Thank you
    Yours
    [email protected]

    It may be due to low number of implicit cursors which the system opens during run time.
    You can try opening the file 'initorcl.ora' in notepad and add a line at the end of the file, if not there,
    OPEN_CURSORS = 900
    and save it.
    restart the system, check your report.
    It is just by experience, try out your luck.
    null

  • Bex input help (F4) very slow response times

    When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option.  We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help.  We did not seem to have this problem before the upgrade to 2004s.
    Anyone have any other ideas?  The users are wanting it fixed.

    F4 help behaviour has changed in 04s 3.5 web run time.
    See attached thread for a solution (not very helpful in some cases.).
    /thread/263372 [original link is broken]

  • New OIF installation - Very slow response from OHS

    Hi,
    I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
    Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
    The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
    We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
    We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
    We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
    It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
    If anyone here has any insight into this problem, please let me know.
    Thanks,
    Jim

    Hi,
    I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
    Jim
    ======= POSTED to Application Server - General forum ============
    I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
    What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
    Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
    I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
    1) What's the effect of dms not working?
    2) Is it possible to just disable dms?
    I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
    Jim

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

    Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
    Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
    install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

    Thanks for the help
    I started on the installation CD OS X 10.4.2, I used Disk Utility
    to partition the disk according to the document that you have proposed. unfortunately
    I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
    does not keep the name and it shows disk0s3 instead. I did an erase on disk.
    When I mount the disk it tells me that I must repair. When I tried to repair, I got
    the following message:
    Volume check failed
    The underflying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    I also had a message:
    Invalid b-tree node size.
    Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
          I used a USB 2.0 to SATA cable to adjust the formatting.
    What to do to fix it?

  • Very slow response, stopping for seconds in the middle of typing an email

    I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.

    For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.

  • Trouble installing photoshop update, and very, very slow P.Shop loading when hit Edit.

    How do I install new update? When I go to my Programs, I can't find "Inspiration Browser", only "Elements 8". Directions say to uninstall Inspir. Browser but I can't find it in my programs. My Photoshop is VERY VERY slow to come up when I hit "Edit". Why is this?

    Did you read the comments, either on the AUR page or in the output that you posted? They explain it.

  • Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

    firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

    Do you have multiple keyboard layouts installed?
    It is possible that you have switched the keyboard layout by accident.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
    * Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

  • Random users getting very slow response when opening messages/attachments or sending email

    I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
    They see the spinning wheel and sit there until it decides to open or send. If the message is opened  and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
    These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
    I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
    This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
    none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
    have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

    Hi,
    How about OWA?
    If OWA works well, it seems an issue on the Outlook client side.
    Please try to run Outlook under safe mode and re-create profile for testing.
    Any related error/warning/information message left in App Log?
    Also consider the network Bandwidth.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Very slow start up and very slow response

    Hi guys,
    SOS
    My iMac is so slow to boot or start up. It takes about an 1-2 hours. It has very slow and very delayed response when doing tasks. I'm not sure what happened.
    I have tried safe mode but it has not worked. I tried the disk utility but it was saying that my DVD (possibly because it is for snow leopard)  is outdated. I think I updated to Lion.
    Do you have any suggestions? I will try any other tricks. Do you recommend to back up before doing repair etc.?
    thanks in advance!!

    Tried to reset the RAM but did not get through. It went to disk utility again. Tried repair but it still saying to back up and restore files. Maybe the HD has been toasted. =(...
    It says: Invalid key lenght. Volume Mac HD could not be verifried completely.. then it says Error: disk utilityu can't repair close back disk out, restoere etc..
    In disk utillity as well, Mac OS X base system appeared- I dont know the purpose of this. It has some files on it. Dont know whether to restore it or what?..Mac HD seems like the it's empty..
    Thanks again guys...It feels like I'm in a maze..

  • Why do I get kicked out of iTunes when deleting a video in my library?

    Every time I delete an old episode of a TV show from my Mac Pro library I get booted out of iTunes and have to reload. This goes on several times in a row when deleting several episodes.
    This problem started with the upgrade to OS Mavericks. This also happens on my iPhone too!
    An Apple employee at a retail store told me it does not happen to him and it may be what Apple wanted to do anyway...I thanked him and walked away!
    Thanks

    Hi flisflis,
    Thanks for visiting Apple Support Communities.
    If iTunes is quitting unexpectedly when you delete TV episodes, this is certainly not normal behavior for the application.
    You may find the information and steps in this article helpful for troubleshooting iTunes:
    OS X Mountain Lion: If an app quits unexpectedly
    http://support.apple.com/kb/PH10928
    Best Regards,
    Jeremy

  • I am using Thunderbird 24.4.0 and it is very slow in loading emails and deleting emails. Did not have this problem till recently. Running Windows 7

    With in the last 3 days my emails have been very slow to open and it takes about 20 secs. to delete an email.
    At times I see the message that Thunderbird is not responding. I am using Windows 7 and Bitdefender AV.
    I closed the firewall on the AV and this did not change anything. Any help will be greatly appreciated

    Disable Bitdefender's option to scan mail folders and see if the performance improves.

  • My printers have become all of a sudden very slow over my network when used with my Macbook. What could this indicate ?

    My two printers on my network (HP 8500 All in one Officejet and Lexmark Pro 805)  have become very slow with processing and printing my documents. When printing, they have also made it not possible to do other applications on my Macbook until finished printing. WHat does ths point in the direction of ?

    Empty your print queue of excess print jobs that didn't go through.
    If you are within 1500 feet (500 meters) of someone who might connect wirelessly, make sure any wireless network you have is WPA2 encrypted, and not using 802.11b.  Reboot the printers, and any routers they may be connected to.

Maybe you are looking for