Very slow Slow rendering time in cs3

My rendering time is extremely slow, for example it is taking over an hour to render a clip about 10 seconds long. the video settings are 50 fps, 1280x720, square pixels. I am running on a 32 bit vista OS with a 3gb ram memory and around 150gb free hard disk space . please help!

Type: MPEG Movie
File Size: 142.7 MB
Image Size: 1280 x 720
Pixel Depth: 1280
Frame Rate: 50.00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:01:26:13
Average Data Rate: 1.7 MB / second
Pixel Aspect Ratio: 1.0

Similar Messages

Adobe Photoshop CS6 Very Slow On Rendering Type

I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P
2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
Windows 7 Ultimate x64
AMD Radeon HD 7690 2GB
8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
The file size when blank is about 56.1 GB.
The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
Could you give me some tips to solve my problem?
Thanks

300 ppi for a banner that size is categorically not normal. Guaranteed.
Get specific instructions from the shop that is going to print it.
You keep confusing ppi with dpi. The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch. The precise terminology is as follows:
DPI = Dots per inch = units used to measure the resolution of a printer
LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
Here's a link to a discussion that may interest you:
http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
It includes the following chart and subsequent comments :
"The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
"Viewing Distance   Present Study
20 feet    greater than 10 LPI
18 feet    18.75 LPI or greater
16 feet    18.75 LPI or greater
14 feet    37.5 LPI or greater
12 feet    37.5 LPI or greater
10 feet    50 LPI or greater
8 feet     65 LPI or greater
6 feet     85 LPI or greater
4 feet     100 LPI or greater
2 feet     133 LPI or greater
1 foot     150 LPI or greater
6 inches   150 LPI or greater
"Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
Talk to your printer. I suspect they will want a file at under 75 ppi, or even much less. Follow the printer's advice/request.

HT1338 My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds. Can you help me?

My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds before the screen changes. This has been happening the past 24 hours. Any ideas?

First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Dreamweaver CS6 and CC both very slow page rendering under Mavericks

Dreamweaver CS6 and CC both very slow page rendering under Mavericks compared to 10.8.5
Any ideas?

One other thing I am seeing:
When I open any document (html, javascript) inside DWCC now, then close it without any changes, DW asks if I want to save changes.
I just tested this under 10.8.5 and there is no lag there, nor are documents mysteriously modified when opened.
Note: I have tested this both with and without other Apps or extensions running in Mavericks and 10.8.5

Adobe Premier pro running very slow when rendering a file

Adobe Premier pro running very slow when rendering a file

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Slow Rendering Time After Installing Final Cut Studio 2 Upgrade

I have a Mac Pro with two dual core processors, 8 GB of Ram, and 1 Terabyte of storage. I'm running the latest version of OSX. Ever since I upgraded to Final Cut Studio 2 my rendering time in Final Cut Pro 6 has become painfully slow. For example, it now takes at least an hour to render a short 5 minute video project. A project that size used to take just a few minutes. I uninstalled Final Cut Studio using AppZapper because I couldn't figure out how to remove the program any other way. Then, I reinstalled Final Cut Pro 6, but it didn't fix the problem. I called Apple's Final Cut Studio tech support, but they just had me upgrade Final Cut Pro 6 to 6.0.1. Unfortunately, this didn't fix the problem. Everything worked fine with Final Cut Pro 5, but ever since we upgraded everything has fell apart. Can anyone give us any insight into fixing this problem? So far, Apple's Final Cut tech support has been unable to find a solution.

Just a couple things to double check.
1. Repair Disk permissions, RESTART.
2. Try setting your RENDER DRIVE to something Different than the Media drive, RESTART.
3. Try Hosting your Media on a new Drive, RESTART.
Also, at this point since you are having system problems, I would backup all of your Media, Projects, etc. I just read a post of someone else that didn't have backup of their project and it became corrupted. I use Lacies SilverKeeper to automatically backup about 20 times a day, so we have dupes of at least all our Projects. And the first thing I do every morning is start the system up, repair disk permissions, and RESTART.
The reason why I suggest restarting after each attempt at changing preferences and such is so that the next time you load FCP it loads the settings that you have saved/changed as native settings as opposed to changed settings, this does make a difference. You will know what I am talking about if you have experienced the Log & Capture Input problem for FCP 5.
Let me know, I have some other suggestions if these don't work.

SLOW rendering times

Hi!
One of my biggest gripes is the slow rendering times with FCP. I know that it's some setting that I have wrong, but I can't figure it out for the life of me. I started with HD video captures using the ProRes 422 codec, but it would take a REALLY LONG time for it to render.
For simplistic sake, I started again with just a simple video I took of a screencast. The video is saved using Quicktime in 636x480, HD.264, and a SD (6-1-6) color profile. There is also no sound to the movie...just video. I figured that this would be a really simple way to try some things out, but I was wrong.
I setup FCP as a number of different codecs and resolutions. I imported the file by just dragging and dropping the .mov video into the Browser in FCP. I then dragged and dropped it to the timeline, and did a render/all.
Even by doing this, it is taking 8 minutes to render a 2 minute video. There must be something I'm doing wrong, and I can't figure it out. I was watching a youtube FCP demo and this guy rendered a video in about a minute on a g5. Being I have a dual-core intel, I can't imagine it taking as long as it is. I appreciate any help and I know there's a million threads out there...but I just can't seem to grasp this.
Thanks!

Hi! I suppose the information below would be helpful. I'd like to get started with a screen capture from Snapz Pro X. Here are some answers to the questions...
Program: Snapz Pro X Screen Capture v2.2.2
Record Settings Used:
- Compression Type: H.264
- 30 Frames Per Second
- Key frame every 500 frames
- Encoding Mode: Single-pass
- Compressor Quality: Best
FCP Version: 7.0.2
Within FCP, this is where I get confused because of all the options.
In the "Easy Video Setup" portion, I have...
Format: Apple ProRes 422
Use: Custom
- Sequence Preset: DV NTSC 48khz
- Capture Preset: DV NTSC 48kHz
- Device Control Preset: Non-Controllable Device
- Playback Output Video: Digital Cinema Desktop Preview - Main
- Playback Output Audio: Default
- Edit to Tape/PTV Output Video: Same as playback
- Edit to Tape/PTV Output Audio: Same as Playback
In the "Audio/Video" Settings, I have the following...
Sequence Preset: DV NTSC 48khz
Capture Preset: DV NTSC 48khz
Device Control PReset: Non-controllable device
Video Playback: Digital cinema desktop preview - main
Audio Playback: Default
Sequence Presets: Default settings for DV NTSC 48kHz
Capture PReset: Default settings for DV NTSC 48kHz
Device Control: Non-controllable device
a/v devices: digital cinema desktop preview - main
- mirror on desktop checked
- audio: default
- 'do not show external av device warning' is checked.
Now, if I right click on the project in the "Browser" window and choose "Sequence Settings", I have the following...
Frame Size: 640x480 NTSC 4:3
Pixel Aspect Ratio: NTSC - CCIR 601/DV 720x480
Field Dominance: None
Editing Timebase: 29.97
Quick Time Compressor: H.264
Quality: 100%
Audio Rate: 48khz
Audio Depth: 16 bit
Audio Config: Channel Grouped
Video Processing: All grayed out except 'normal' is selected for motion filtering quality.
================
Now, this is where I get really confused with FCP. Everybody says to set it up with the same settings you use to record. Does the "Easy Video Setup" work hand-in-hand with the "Audio/Video Settings"? Should you skip the easy setup and just jump into the A/V Settings?
WHile typing this message, I also noticed that the "Sequence Presets" in the Audio/Video Settings are set to 720x480 using millions of colors. In the settings for the file in the "Browser" Window, I have it set to 640x480, which is different than what's in the av settings. Should these be the same?
I'm just getting started with FCP, and these are just the questions I have. What is the 'workflow' one takes to do this? Start FCP, setup the 'audio/video settings' area, choose the preset, edit the sequence preset to something basic, and then drag and drop your mov files in? I suppose it's just confusing because you can set the video settings in FCP, in the 'easy setup', if you right click on the project and choose settings, etc... Which one has precedence over the entire project?
Sorry for so many questions.
Thanks in advance...

Mail has 16k messages, and performance is very slow, with loading times taking up to 5 seconds every time I open Mail. How can I increase performance?

Mail has 16k messages, and performance is very slow, with loading times taking up to 5 seconds every time I open Mail.
How can I increase performance?
I'm running a MacBook Air 4GB 1.7GHz 10.7.2.
Graham

One possible solution would be to organise your inbox into folders.
Its never relly good on any system to have one folder that has everything in it.
Try going to you web gui for that mail account and organise your folders and move mails from your inbox into corresponding folders for better organisation.
Several folders containing the same amount of one folder will usually load a little quicker as the folder may not be accessed to download its content unless veiwed.
So having 10 folders with organised content, and you inbox as an area thats to hold only new emails would work much much quicker with imap.
Most imap servers will only update the contents of a folder when its veiwed.

Firefox (3.6.10) is very sluggish/slow and hangs up

All of a sudden Firefox (3.6.10) is very sluggish/slow and hangs up
I've been using Firefox (very actively) for over a year now and all of a sudden (yesterday) it began to act very sluggishly. On sites I have always visited frequently it hangs up for periods of 15-90 seconds or more, won't scroll down, won't open hot links, slowly opens new tabs ...
I rebooted my PC (multiple times), powered down my modem and router, ran a Norton disk optimization - essentially making sure it was not an outside factor effecting Firefox's performance. (Note: I am using a cable connection.)
I then ran a side by side speed comparison with Internet explorer (on my 2nd monitor) going to the same web sites, and IE had no problems/hang-ups.
FYI I only have a couple of add ins/extensions (Java, Microsoft Framework, Norton, No Squint, & RealPlayer) and none of those are new within the past few weeks at least.
Any ideas on what could be causing this? How to fix? (As I much prefer Firefox to any Microsoft product.)
Thanks.

Yes, FF gets sluggish from time to time. Sorry but it's the fact! FF also cannot render some websites properly (especially v3.6.10). I'm a big fan of all Mozilla software but FF 3.6.10 makes me very disappointed.

Slow page rendering due to a LOV!

I was trying to figure out what the cause of my slow page rendering was and looking at the debug results I figured for one of my page items which is a LOV I get:
0.18800 13.98400 ...Session State: Save "P2_CATEGORY" - saving same value: "4"consistantly taking around 14 seconds.
I have even simplified the LOV to type static, and it only has 6 values. There is only one computation for this item which is static assignment only when the value of item is null.
I'm wondering if it's the item being saved in session really which is taking all this time or something else could be causing it to run slow. I mean, can the debug results be misleading me?
I'm using Apex 4.1 and Oracle 11g. I have 40 Shared_servers set.
I would appreciate any hints.

Hi,
set partialSubmit=true on the button
Frank

Slow Shut Down Time For Macbook Pro Retina Snow Leapord

Hello, I was hoping somoene could help me with the following problems.
I have brand new Macbook Pro Retina, 15inch, 16G RAM, 500G of SSD, running Mountain Lion, and lots of professional recording software. My macbook frequently shuts down after 30 seconds, that wonderful grey wheel spinning in the center of the screen as if it were an old PC.
I've contacted apple frequently. They check to see that I've repaired disk permission, they reset...the RAM i believe, they ask if i shut down all the programs. Even through doing all of this, usually my macbook takes 30 seconds to shut down. Sometimes it takes only 5, which is how it usually should be. ANd this occurence seems to be inconsistent with the apps I use. Sometimes it takes long to shutdown when i've barely used a thing. Other times it shuts down immediately when i've used a lot of different programs at once. So there's no constant.
The apple boys suggest reformatting the computer to make sure it isn't a hardware issue. I refuse to accept that after only 3 months of use I already have to reformat everything. It's not the most enjoyable experience because I'd have to reinstal all my audio software despite Time Machine's magic tricks. Any suggestions?
Here is a link I've found on the matter: http://thecustomizewindows.com/2013/02/fix-mountain-lion-slow-shut-down-time/

These terminal commands decrease the excecution time of a process that has caused slow shutdown times for many users. This resolved my slow shutdowns. IF you are comfortable using terminal you can give them a shot, but be VERY careful using terminal.
These terminal commands should also fix the problem then and kill the services after 2 seconds:
Code:
sudo launchctl unload /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist sudo defaults write /System/Library/LaunchDaemons/com.apple.coreservices.appleevents ExitTimeOut -int 2 sudo launchctl load /System/Library/LaunchDaemons/com.apple.coreservices.appleevents.plist

Slow page loading / Time outs

Hi guys,
I am getting very slow page loading times. This only started to happen today, before this my connection has been solid.
I have reset the router, all the other PCs in my house are having the same problem. I am not running any P2P/Downloading software.
Speedtest says I am connected at 12MBPs. It takes me a very long time to load a page and most of the time they just time out.
Router stats -
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 3.6 dB / 5.7 dB
Line attenuation (Down/Up) 29.5 dB / 12.7 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Cheers

Keith_Beddoe wrote:
There appears to be a problem with the BT DNS servers at the moment. They keep going offline.
Hopefully someone is aware and dealing.
Which ones are you using ? BT have LOTS of machines providing DNS services
I'm currently using:
Primary: 194.72.9.38
Secondary: 194.72.0.114
...and haven't really noticed anything untoward all day, and I've been online and active for most of the day. Not much longer though - soon finished, then it's beer
I have seen quite a few reports of slow loading pages etc elsewhere though.

J2SE 5.0 plugin and slow applet load time

Folks,
I have an applet (https), with about 5 MB of jar files. After we
moved to J2SE 5.0, the load time seems much slower. It used to load in
40 seconds. Now it loads in 4 min.
An odd thing I noticed is when I minimize my Internet Explorer window,
the applet seems to start up quickly again.
Is this possibly related to the "starburst logo" progress bar
animation that Sun now uses for applet start ups? I know that
animated gifs can sometimes chew up quite a bit of cpu time.
I think the progressbar property is no longer in 5.0
I'm running on a single proc laptop. When I run it on my 2 proc
server, it is not as obvious, and startup time seems reasonable.
Thanks,
Rob
[email protected]

I'm also seeing a similar slow applet startup time. CPU is 100% (IE is in high 90s). Works ok on my 3GHz P4, but is very slow (up to 16 minutes) on 400 MHz P2.
My problem seems to be related to how my .properties files (23 total, for internationalization support) are handled.
During start-up in JRE 1.5 I see the following for each .properties file:
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.properties with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.properties with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en.properties requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
The file (1 of 23) I supply is named fax.properties (the default file). Since my locale setting are English/US I guess the I18N code is trying to figure out if the regional files are present. Each of these requests is timing out 5-8 seconds for each - it builds up quickly.
I haven't been able to find out why this is happening or resolve the issue. I'm close to restricting my applet to only 1.4.2 as that was fine and posting this as a bug.

AIR application performance is very bad(slow)

I have an AIR application developed using Flash CS3. The
issue is application performance is very bad(slow) when the OS
(Windows XP) display property setting is in 16 bit color mode. When
the display property setting is changed to 32 bit color mode
applications performance is good and faster.
Application has used lots of color gradients, tween
animations.
System Configuration:
Windows XP (SP2)
1 GB RAM
INTEL P4 , 1.5 GHz Processor Speed.
Can any one explain that is there any issue with Flash Player
or AIR runtime.

quote:
Originally posted by:
cyberKafka
I also understand that creating windows via AS (not MXML)
could help a bit (apparently a lot with memory allocation. have not
tested myself thou.)
Do you have a link for any more info on this? Sounds
interesting.

Very slow Slow rendering time in cs3

Similar Messages

Maybe you are looking for