Very slow to open new window

How to fix very slow opening window. I have vista 64. Since the last foxfire update it is very slow to open new windows. It can take some windows opening over a minute to open. (yes minutes not seconds)
Once a window is open I can open in new tab with no problem, but not with new window. (I like to have many windows open at a time)
When l click to open a new window either from a link or new window, it seems that nothing is happening. Then clicking to open another one which seems to open faster. Then all of a sudden the first window decides to open after about a minute or so. Sometime it seems to hang longer than other times.

I did try the safe mode and didn't work. I did make iexplorer my default and then back again to foxfire and it somewhat worked. It was work not bad (but not as good as before) until I rebooted and it seemed the more I used it the better it became. Go figure :)
Well I just did another firefox update to 4 and it works perfect and maybe even better than before. (or I got use to how slow it was :) )
Thank You for you quick reply and I'm very happy for the new update... So far so good.

Similar Messages

8800 Very Slow At Opening New Messages

I have a 8800 running the 4.5.0.124 version of the software and it is very slow when opening messages.
This only happens when opening unread messages and can take 1 minute+ to open. Once an email has been opened once it is instant. (Even messages that have only been read in Outlook). When it is 'opening' the message the device is completly unresponsive then will suddenly either open the message or if it has been longer it will lock the device.
I have also tried using the 4.5.0.55 software and this still has the same issue.
There are no entries being put into the error log while this is happening.

Check these links:
Maximize memory and battery life
Optimize BB memory
Perhaps these article may help you to resolve your issue.
if your issue solved set "Solution" mark at the relevant post

CS4 apps are VERY slow to open Windows file browser with File Open or File Save As commands

We are running CS4 on Windows 7 with all available updates installed. Photoshop and the other CS4 applications are VERY slow to open a Windows file browsing window to select files when File Open or File Save As menu options are run -- it can take as long as a minute or two for the window to open. Once the window opens and a file is selected, then opening or saving the file is very quick. The location of the default directory, whether it is on a local drive or a network drive, makes no difference. Any suggestions as to what the problem might be?

Raphman02
The link that I posted earlier is off. Read this one
http://support.microsoft.com/kb/2501584. I discovered in my network that the MS Office File Validation Patch made excel crawl when opening over the network though nothing else changed. At the time I was opening Excel on Office 2003.
You can manually turn this off by editing the registry and tunring it off. Going forward I skipped the patch to keep my sanity. Not sure if this is the same as your issue, but the support article will go into detail how to either have Fix it
clear the issue or change the proper registry keys.
Hope this helps

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Open and Save Dialogs Very Slow to Open and Populate

In all of my apps, the Open and Save dialogs have become +very slow+ to open and populate since installing Snow Leapoard.
This only happens on one of my machines, and not others. (I've unmounted all connected drives, just to eliminate that possibility.)
Any thoughts on what this could be. The delay is significant (and feels like the old days of Windows, which I thought I'd left behind).

The problem now appears to have gone away. The only change I've made is that I replaced an external drive that had recently died with a new one and gave it the same name as the failed drive.
Could a the dead drive have left something behind (or failed to leave something behind) that is stumbled over (or looked for and not found) each time the file system was accessed, and that got cleaned up (or re-created) when the new drive was connected and renamed?

Excel very slow to open files

Recently installed Microsoft office 2010 pro and certain excel files are very slow to open. Every other program opens just fine, however when I open certain documents they can take up to 2-3 minutes to open. If I try to open multiple excel documents at the
same time my computer freezes. I disabled all of the add-ons, however it did not do anything. Does anyone have any ideas on how to fix this issue?
System information: Intel i5- 6GB Ram, Windows ultimate edition

Try this :
Go to a folder in Windows Explorer, then Tools ->
Folder Options, then the
File Types tab. For each of XLS, XLSM, XLSB, XLSX, etcetera, select it, then click
Advanced, (if Advanced doesnt show, click Restore first, then Advanced) select
Open in the
Actions list, then click Edit
Adjust the settings to:
Application used to perform action:
- "C:...\EXCEL.EXE" "%1"
Use DDE
- Checked
DDE Message *LEAVE BLANK*
Application
- Excel
Topic
- System
This is meant to open a new instance of Excel each time you double click on an Excel file. I had /DDE at the end of the command string and other garbage in
the DDE area below.
But the above worked for me.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

'Open New Windows In A New Tab' is not working when the popup is invoked by Flash

I surf a lot of porn sites. And some of them invoke a popup if you click the play button of their Flash player. Even though I have FF set to 'Open New Window In A New Tab', this isn't working if a window is invoked by a Flash object. For example, if I want to watch porn clip on tnaflix.com and click the Play button, then a popup window of livejasmin.com comes up. But it doesn't open in a new tab. It opens in a new window, even though I've set the above mentioned option. This is very annoying. Please, fix it.

Thanks for the responses and sorry for taking a while to get back. I have been looking around but not sure where is the "about: config page." When I click on Firefox "about" there is nothing to configure. What do I click on? TIA

Embedded links in emails won't open new window or tab in FF.

Running Mac OS X 10.6.6 and FF Version 3.6.12. I'm using Mail Version 4.4 as my email client and when I try and open an embedded link from an email, the link doesn't open a new tab or window. FF recognizes the link, but doesn't respond with a new tab or window. If I copy and paste the link into the browser the links work fine, so I feel like it's a setting or bug that has been changed somewhere somehow. This problem only happens when I try to click directly from the email. I've tried searching the preferences in both Mail and FF, but can't seem to find anything that fixes the problem. This issue started happening two weeks ago when I did the latest Mac OS X security update. Any thoughts or suggestions?

Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
:o)

Since installing OS X 10.8.2 Safari is very slow to open sites

Since installing OS X 10.8.2 Safari is very slow to open sites

Do you get a notice that Safari has quit unexpectedly? If so, please do the following.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Can't open new windows if clicking on a link!

For some reason I can't open new windows if I clic on a link. It's alright if it opens in a new tab, but if it opens in a new window, the window that opens is just blank. I have no idea why it's doing so, it started a couple of weeks ago, and it's very annoying. I guess it has something to do with securityoptions, but I haven't been able to sort it out. Would be very glad if anyone should have an answear to this!

Try These Possible Solutions:
1. Restart Firefox and your computer.
2. Use the keyboard shortcut CTRL+T to open a new tab.
3. Run firefox in safemode (no add-ons) Go to start>all programs>Mozilla Firefox

How do I tell Logic to open new windows always on my external monitor (when available)?

Hey guys
I finally got my own copy of Logic 9 from the App Store and I'm very happy with it.
I have a question though. Logic always open new windows (e.g. when opening a project or when opening a plugin, etc.) in my Macbook Pro's monitor, but at home I have a big external screen which I want to use as the main screen.
I already have set the external monitor to be the main screen in the System Preferences, so the dock and menu bar always display correctly on my external monitor when available. But Logic still uses my MBP's monitor as main monitor, so I have to move the windows to the external display every time I open them.
Is there a way to tell Logic to use my external monitor as default when it's availble?
Thanks, Josh

There is a thing in OSX that is called "key focus" or "focus".
When you type on your keyboard (text or any keyboard shortcut), the OS has to know where to send that command to if you have multiple windows open (or multiple applications). The answer is, it directs the command to the window that has "key focus".
The key focus window is the one with the active window title bar (not grayed out) and the colored three buttons in the upper left corner (unfortunately, Logic doesn't use colors).
Now to Logic:
Logic follows the same rules. However, you have to pay attention to multi-pane windows like the Arrange window. This is a window with more windows (panes) inside. Now the question is, which window pane inside that window has key focus. If you look closely, then you see that the window frame changes their shade slightly (sometimes very hard to see). Pay especially attention to plugins. They also have key focus when selected and can receive keystrokes.
Finally to your question.
You cannot set the preferences on which monitor screen Logic opens a window. This is determined by the location of the window that has currently key focus. Any new window and also alert windows and dialog windows (Save, Open) will open on that screen.
So if you want a window to open on you external screen, click on a Logic window on that screen.
I have five monitors on my Logic setup and I use a QuicKeys macro (push one button) that sets the key focus to my main monitor and now any new window will open on that screen screen.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar.
i already tired complete uninstall and reinstall, but the options are still missing.
print scr: http://www.freeimagehosting.net/9znkp
Thank You in advance for help. Best regards

Hello,
''jstavene wrote:''
can find nothing under the tools menu for private browsing?
Then it's not the same issue.
If Firefox is set to '''Never remember history''', then you're in “permanent private browsing” mode, in which case the menu item ''Stop Private Browsing'' will be grayed out. Perhaps that's the case, and you don't find the menu item easy to see?
* [[Settings for privacy, browsing history and do-not-track]]
If that's not the case, then menu items can be hidden using the userChrome.css file. Check if it exists, and if it's there, rename it, then restart Firefox.
* http://kb.mozillazine.org/UserChrome.css
In Firefox Nightly (what will become Firefox 20), per-window private browsing has been added, so the menu item under the Tools menu is gone. It's been replaced by New Private Window under the File menu. I don't suppose it's very likely that you're using such a cutting-edge test version of Firefox though.
If that doesn't solve the problem, since it's a different issue, it would be best if you would ask a new question.
* https://support.mozilla.org/questions/new

My computer suddenly stopped allowing me to open new windows in firefox, how do I reset it to do this

last week my computer (a thinkpad) stopped letting me open new windows by pushing the + key in a window, so now when I search it replaces the open window. what happened and how do I fix it?

The suggestion by TonyE will remove the toolbar from Firefox.
To remove the Ask Toolbar completely from your entire system, see:
*http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
 
 
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (Reader X)
**More info about version 10.0.1 (Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.0 r32
**Very old version
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

CS4 File info dialog very slow to open and respond.

CS4 File info dialog very slow to open and respond. Every click or or key stroke takes more than 1 second to record. I have try multiple changes in the performance preferences and nothing has an affect. This is the only dialog box in the program that has the problem. The problem started when I uninstalled and reinstalled because of problems with the program freezing. I have changed every setting in the preferences performance section back and forth including 3 different amounts of memory usage (lo hi and recommended) restarting PS every time and nothing works. I would appreciate any help, keeping in mind that there have been no changes to the PC and it worked fine for a long time (approx 1/12 years) previous to the reinstall. Lenovo H420 windows 7 64bit 8gb ram 1gb HDD

I've been having the same problem now for a few weeks and its killing me. Not sure what I can do, but in Photoshop and Bridge, the only programmes I use on a daily basis, it takes me forever to enter file information.
My specs are:
eMachines ET-XXXX
Windows 7 Home Premium
4GB RAM
500GB HDD

Very slow to open new window

Similar Messages

Maybe you are looking for