Very slow wireless internet for netcfg 2.5.4

Dear all,
Ever since I upgraded my entire system, including netcfg, wifi on my Thinkpad X61 (iwlagn driver) and my local home network had been dead slow. Thing is, on another network I'm not experiencing this problem at all with the latest netcfg version. Neither does it occur for netcfg version 2.5.4 and my local network. The configurations for both tried networks are identical and they are both WPA2 protected. I've looked at this: https://bbs.archlinux.org/viewtopic.php?id=119078, which seems to be describing my problem well, but I find the solutions quite vague and the OP eventually resorted to buying a new wireless card (which is virtually impossible for a notebook). Another note is that I'm using the latest version of netcfg without any issues on my wired desktop PC and local home network. So this makes me believe that the problem is isolated to some weird and as of yet unidentified correlation between my wireless interface, the latest netcfg version and my local home network.
For now, I downgraded netcfg to 2.5.4 on my Thinkpad, since this version works without issues everywhere, but I would obviously want to have the latest version eventually. Does anybody have even the slightest clue about what could be causing this issue? Thanks in advance...
Last edited by geniuz (2011-08-25 15:29:02)

Netcfg pretty much just configures wpa_supplicant and dhcpcd. The best way to go at solving this is to manually start wpa_supplicant and dhcpcd first the way netcfg 2.5.4 does, than again the way the latest netcfg does. Look at the differences, figure out which one is causing the problem.

Similar Messages

Very slow wireless internet when running on AC power

Since installing Leopard (and then updated to 10.5.5), I have been having really incredibly slow wireless internet access - however it is only like this when the AC power cable is plugged in. If I pull the power lead out and work on the battery, then the internet starts working again almost immediately. The airport signal isn't lost at any point, so I am a bit confused.
I have reset the PRAM, entered new DNS servers (opendns.org ones) and even set my RWIN lower as described here: http://discussions.apple.com/thread.jspa?messageID=5670430 but with no noticeable result.
My macbook pro is 2.33ghz Core 2 duo. I'm using a Belkin n1 router with WEP encryption. The idea that the power supply would affect my wireless internet like this seems really bizarre. I would be grateful if anyone has any idea what could be going on here.

Well l.e.o, since no one else is taking a stab: check your System Preferences > Hardware > Energy Saver settings. See if Settings for Power Adapter, Optimization, is not set for "Better Performance." It may be set for "Better Energy Savings," and the settings for Battery are set to Optimized for Better Performance?

Very slow wireless internet

I have had a macbook for about a month now and it has always gone pretty slow, it is hooked up wirelessly to a 2wire router. I then hooked it up to another router on vacation which i think was a d-link, and it went tons faster. I also recently added another pc to my wireless network and that also goes pretty slow so i think it is a problem with the router. If anyone could help walk me through some steps tp possibly fixing this problem that wold be great.
Thanks

What wireless speed is your 2wire? Those values are almost identical to what my Dell notebook (with 802.11g) gets with my 802.11b Netgear router.
Of course, that is on a good day. Hardwired, the Dell got a full 6 MB/sec. Since then, I've never gotten up to 1500 kbps on any machine. When it comes to broadband, your mileage may vary. If you have a cable modem, your speed is primarily dependent on wind speed, humidity, and pollen-count. If you have DSL, your speed is slower, but much more reliable.

Very slow wireless connection for me but not for others

I set my 12" powerbook next to my girlfriend's PC notebook and ran an online speed test on each of them. She gets a download speed of about 3mbps. I get a top download speed of about 200kbps. Why does my powerbook get only 1/15th the download speed that she does?
Thanks for your answers.

Are they both on the network at the same time? If one computer has heavy use of the Internet connection, other computers later on may not get as much of the available bandwidth.
Which speed test did you use? I use this one.

Very slow wireless internet on MBP 15"

My laptop has been working perfectly on wifi until around the last 2 weeks or so. Maybe it has something to do with an update.. When I connect my laptop to the internet with an ethernet cable it is blazing fast as it should be.. I'm very disappointed that I'm already having problems with the computer and I've had it around 3 months. I hope Apple can address this problem ASAP, because it is VERY frustrating...

Yes, perhaps you would want to do the update mentioned above before doing anything drastic. But, note that at least one is saying that some update from "last night" is causing him/her airport problems. I'll get the post reference and be right back. Here tis: http://discussions.apple.com/thread.jspa?threadID=2114759&tstart=0. I am not positive if the one referenced above and the "last night" update are the same. But, note that the one above apparently deals only with problems occurring while on battery power.
Message was edited by: donv (The Ghost)
Message was edited by: donv (The Ghost)
Message was edited by: donv (The Ghost)

Slow Wireless Internet (BT homehub)

Hello, I have a problem with slow, wireless internet with the BT Broadband Homehub 2 (black). I am using a 1g Macbook 2 running 10.4.11.
A quick summary of my problem: Recently, there was a fault on my line that was affecting my phone and my broadband. BT quickly repaired the fault and reset the broadband as I complained about the speed. Connection monitors and speed tests all say that everything is running fine although I Firefox and Safari are loading pages extremely slowly; streaming of media is impossible and it sometimes times out before I can even send webmail. When I first got the connection it was lightning fast (so much so that friends commented on it when they came over). I have see that lots of people seem to be having this problem with Macbooks and I am 99.9% certain that the issue is a mac software/hardware issue. I have tried EVERYTHING that has been suggested in other threads
1.I have manually entered different recommended DNS figures
2. I have changed the wireless channels
3. I have manually entered the DNS figures supplied by the ISP
4. I have rebooted with default settings
Nothing seems to work. I'm a little bit out of my depth with this sort of thing but I have noticed that the IP address supplied by my router to airport settings doesn't correspond with the IP address in the
ISP info. I tried changing that but then I couldn't connect at all. Somebody must know what is going on here as I've seen this problem quoted on this and other forums. Is it a problem that apple are aware of? Somebody please help as this is very very frustrating.
Thanks everyone.

Hi Jocksil, and a warm welcome to the forums!
BDAqua, what does you psot mean?
No idea if it worked for the OP, some never return to tell us what happened.
My suggestion should speed up a lot of connections, and never hurt anything, but not sure what the mentioned problem was, but my suggestion won't likely help connecting in the first place, unless it really is connecting, not just getting anywhere once connected.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.254.3.183 behind the scenes.
Feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=755

Airport Utility cannot find my Airport. It is nearby, no interference, and worked for about 9 months. The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

How can I get Airport Utility to find my Airport? It is nearby, no interference, and worked for about 9 months. The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

Are you using the latest version (5.5.2) of the AirPort Utility to access the new 802.11n AirPort Extreme Base Station (AEBSn)? Your tagline has it that you are running OS X 10.4.6. You would need at least 10.5.7 to run the utility. I assume that you are running the latest utility on another device ... correct?
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" reset on the base station.

WRT54G very SLOW Wireless

All-
I hope someone can help me with this problem. I have a WRT54G v8 router and a PC with Vista. My ISP is Comcast, and I am paying for 12 Mbps. When I plug my computer directly into the modem or router I get speeds usually about 6 Mbps, sometimes up to 8 or 10 Mbps. However, when I connect to the internet through my wireless connection it is VERY SLOW. The connection is only about 200-400 Kbps. I have all ready spoken to one of the technicians at Linksys. They advised me to change the following settings:
On the setup tab, Make MTU "Manual" and size 1365.
On the Wireless tab, set to Channel 11.
On the advanced wireless settings, set Beacon Interval 50 and Fragmentation Threshold and DTIM Interval to 2304.
In the Security Tab, uncheck "Block Anonymous Internet Requests" box.
I made these changes, but my connection is still very slow (380 Kbps).
Help!
Thanks!

As you have already made the changes on your router, and still its not working. Have you tried upgradeing the firmware of your router? If not then you can Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router : Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router, Below are the wireless settings which you can change on your router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Slow wireless internet connection using airport extreme

My wireless internet connection works but is very slow (<80kbs). The problem seems to be with the airport extreme (brand new, purchased in May 07) because my connection is very fast (>6mbs) when i connect by wire to the airport extreme base station. Signal strength is strong, so i can't figure out the problem. Any ideas?
imac Mac OS X (10.4)

BK37, I hope you've solved your problem by now. But if not, and for the benefit of others reading this post, let me share what I (finally) discovered when I had virtually the same problem, i.e. 8mbps wired speed, <50kbps wireless speed.
I tried literally <span style="font-style:italic;">every suggestion I could find in the Airport discussions. First, I can assure you that changing the channel can give you incremental speed improvements in some instances, but for radical drops like yours, it's not the answer. Nor is turning off ipv6, or changing to WEP, or turning off Remote Access, or moving the AEBS, or or or or or....
With such a radical drop in speed, it's most likely you have a hardware-related blockage somewhere. In my case it was my wiring configuration. My setup was France Telecom Livebox (ADSL modem / ethernet & 802.11g router) --> Ethernet cable --> Linksys RTP 3100 IP phone adapter / router --> Ethernet cable --> AEBS --> 3 Airport Express set up to extend network and run AirTunes. After eliminating every other possible problem, I narrowed it down to the Linksys router, which for reasons I have yet to figure out was trapping the speed to the AEBS. I ethernet cabled both the Linksys router and the AEBS directly to the Livebox and presto! Back to blazing speed.
Hopefully this info will be helpful to you or some poor soul in the same situation, as I would have loved to have had it myself before I pulled every hair out of my head!
iMac 21" Intel Mac OS X (10.4.9)

Very Slow Wireless Over Time Capsule

The background: I set up a Time Capsule for my wife's Mac Pro. It is set on full-time 'N'. And on the Mac Pro, it blazes (She gets wireless downloads of 8,000 to 10,000 kbps).
I have an old Powerbook G4. In order to keep that machine on the internet, I plugged our old Linksys 'G' Router into the back of the Time Machine via ethernet. Worked perfectly. We have two networks in the house one 'N' one 'G'. Both work beautifully.
The Issue: My new iMac arrived today. I immediately connected it to the Time Capsule via wireless and the internet connection was very slow. I then changed the iMac's network to the Linksys 'G' router and suddenly the internet connection was fast.
I did some tests using speakeasy.net (a free on-line speed test). They confirmed my subjective experience. My wireless 'N' Time Machine downloads were around 490kbps. When I connected to the Linksys 'G' router, my download speeds jumped to 11,000+ kbps.
I am perplexed. Since this problem is only on the iMac, not on the Mac Pro, it seems like it must be some setting deep in the bowels of OS X.
One last detail: the only reason I care is that our living room stereo is connected to the Time Machine 'N' network via an airport express. I need to be on that network if I want listen loud.
Thanks in advance for any suggestions.

I have a similar problem with the wireless function of my new Time Capsule. I have replaced an older Airport Base Station (802.11b) with a new Time Capsule, moved an Airport Express (802.11g) from Air Tunes use to remote printer use, and added a new Apple TV, all in the same network. I have high speed cable internet service (suitably fast through the old Airport Base Station) to the WAN port of the Time Capsule. My problem is that I am repeatedly having to perform a software "reset" on the Time Capsule in order to keep the wireless internet throughput above dial-up performance speeds. At the same time, speed is not a problem on my iMac, which is attached to the Time Capsule by an ethernet cable. Internet speed is also not a problem on the Apple TV. Performance on the Epson Stylus CX7400 attached to the Airport Express is also very slow, taking 2-10 minutes to print a simple page of text.
I would appreciate any ideas or suggestions.

N82 black - slow wireless internet connection

Hi
New to the group and just got N82 through Orange.
Really like the phone but disappointed with the wireless internet connecion - one of the features I was attracted to.
I have a Netgear wireless router connected to a cable modem, with a 2Mb cable internet connection. My laptop runs fine on this connecion.
My phone identifies and connects to the WLAN fine through the wizard (phones reports a 100% signal strength from the wireless router) however I get a few problems when trying to connect to the internet:
1) Very slow download of pages apart from the homepage (which I have changed to bbc.co.uk). Most of the time pages hang half way through.
2) Frequent "Internet timeouts".
As the router signal strength is very strong (I am trying this a few feet away from the router) and my laptop connects and downloads just fine I can only think that there is something with the phone that isn't quite right or a setting which needs adjusting.
My router has WPA2 security set up and I think my phone has the latest firmware (v. 20.0.062).
Can anyone help improve my internet experience with this phone?

15-Jun-2008 10:47 AM
eddie08 wrote:
14-Jun-2008 09:14 PM
vijaygunners wrote:
sounds a lot like what happened to my N95 and I finally sorted it out.
check here
/discussions/board/message?board.id=smartphones&message.id=93313#M93313
let me know if it worked
Thanks very much, it seems to have made a difference. Pages that previously hung now load.
I was hoping to post this reply using my phone but the discussions site doesn't seem to work properly!
Thanks again for your help.
no probs
Nokia N95-1
v30.0.015

Slow Wireless Internet Since 10.5.5 Update

Hi.
When I click any link or enter any URL in Firefox, the status indicates "Looking up (URL)..." for literally 5-10 seconds before loading the web page. This happens on all browsers (including Safari, FireFox 3, Camino, and Opera) and has started since the 10.5.5 update. I've tried it on my college's network and it does the same thing. Running Windows via Boot Camp does not suffer the same problem. I have many other computers and devices on the same network that do not experience this problem, thereby eliminating anything other than the Mac OS at fault.
What the heck did 10.5.5 do? Is there a fix for this other than running a restore with Time Machine and going back to 10.5.4 (which IMO is super stable and problem-free)?

Weird problem here too. I've had wireless problems of all kinds since Leopard. Then with 10.5.3, 10.5.4 things settled and worked fine. Now this!! Ahhhhh! I have full wireless signal, email is slow but works. But browsing is very slow. Funny thing: not to every site. There are some I used to visit which are now almost unreachable; they start to load, then they fall asleep with the browser saying "connecting to...". Once every 10 or 20 refreshes then succeeds in loading the page. But clicking the next link from there the problem is back. Definitely after 10.5.5. No other changes of any kind. Not a DNS problem, at least not directly: nslookup looks good, tracing routes is ok also (14 hops away). Connection to other machines in the lan ok. Connections from ethernet linked machines (and also from the iphone) to the internet no problem.
I'm looking for a way to go back to 10.5.4!!
P.S. By now I'm almost sure this is a hardware issue, some sort of incompatibility at a hardware level, which apple is aware of (but can obviously not admit) and at some time decided to patch somehow - using some sort of software hack...but then forgets about it at the following update, so here we go.

OS X 10.8.3 leads to VERY slow home sharing for Apple TV

Everything was fine, but as soon as I upgraded to OS X 10.8.3 Home Sharing on my Apple TV became unusably slow.
Internet is fine (I have a very speedy 40Mbps connection) on both my Mac Pro and my Apple TV (for example movie trailers streamed over the internet work fine). The issue is the Home Sharing connection between my Mac Pro and my Apple TV.
Some Tech Specs:
Mac Pro (Mid 2010)
24GB Ram
OS X 10.8.3 (12D78)
Connected via Ethernet
Apple TV 3rd Generation (three weeks old!)
OS "up to date"
Connected via Ethernet
Virgin Media Super Hub
Cable Modem
Connected to Mac Pro and Apple TV via Ethernet
Problem: viewing movies streaming from the Mac Pro, which until I updated to 10.8.3 worked flawlessly, now stream SO slowly, that the Apple TV is now useless for this purpose.
- Tried using Wi-Fi on the Apple TV. Same issue.
- Tried turning off Firewall on router. Same issue.
- Tried using Pro gigabit switch between Apple TV and Mac Pro to see if Cable Modem was at fault. Same issue.
- Restarted the Apple TV countless times, resetting the network settings on the Mac Pro, renewing the DHCP leases on Mac Pro and Apple TV. Same issue.
Curiously, I tried using Nullriver's MediaLink UPnP server to try and stream content from my Mac Pro to my PS3 so I could try and watch content that way. However, the content seemed to suffer from the same extremely slow download... Clearly something has changed with the network settings and it's made my Apple TV a useless lump of black plastic as I bought it for the sole purpose of streaming content from my Mac Pro to the TV downstairs.
Anyone else have this problem? Any comments or solutions would be welcome.
J

I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now. I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one.

Very Slow Wireless on New MacBook Pro

Hi just bought a 13' MacBook pro about a week ago. Immediatley from getting it my wireless internet is very slow. We have a few other pc's in the house that use the same router and they all run fine on the wireless, even our phones run great. When I am plugged in with the ethernet cable the internet seems to work fine but as soon as I am wireless it takes forever. Pages will take minutes to load up. I was on the phone with mac support and what they did didn't seem to fix the problem. I am getting so frustrated and would really like any help. Thank you.

In the Belkin config, have you got 'Protected Mode' On or Off? (Wireless > Channel and SSID > Protected Mode) It's generally faster Off unless a lot of 802.11b devices on your network.
Packet loss or packet re-ordering might cause that drop, as might a high MTU value, but it's hard to troubleshoot ...
(I'm using a Belkin G+MIMO and getting as fast/same performance as hard wired machines)

Slow wireless internet connection after 10.6.4 update

After the initial excitement switching from windows to mac, I'm now having a problem I can't figure out. This problem is mentioned many times in several forums, but I'am unable to find the proper solution.
After unpacking my new MacBook air last week everything worked simple, smooth an correct. Then an automatic update to OS X 10.6.4 was downloaded and installed. I'm having troubles with my wireless internet.
Airport seems to be functioning ok but most sites take ages to load. There's also problems with loading pictures, movies, dynamic contents, etc. Some sites function partially on Firefox, Safari seems to be hanging al the time.
Resetting router, starting MBA in safe mode didn't have any effect. On the ethernet connection the mac and internet is working as a dream. Other windows device also function normally. How do I get my wireless internet working properly??
Help!

I had exactly the same problem after updating my mac to 10.6.4. I did the usual and trawled the net but could not find a decent fix. It became very very frustrating so in the end I rang apple and luckily I spoke to a technician who had exactly the same problem with his machine. He explained it doesn't effect every mac for reasons I wont go into here but in order to fix this problem 100% guaranteed, you need to do a reformat and a reinstall. This should be done periodically anyway to keep your machine running in tip top condition. I wasn't happy to have to do it but in the end I'm glad I did.
For those who have not done this before see instructions below.
1. Back up your disk with time machine to an external HD
2. Boot from installation disk (holding down C)
3. After choosing english language select utilities from menu bar and select disk utilities.
4. Select your mac hard drive, erase, and in security options select "zero out disk" and erase.
5. Reinstall operating system with installation disk, when done update to 10.6.4 assuming that was the system you had installed when you backed up.
6. Reboot again holding C with installation disk, select utilities then restore option, choose your time machine backup and away you go. FIXED!
It takes a while but you will probably spend just as much time hunting the net for fixes that just wont work and anyway you end up with a clean install that will probably fix other little bugs you were unaware of.

Very slow wireless internet for netcfg 2.5.4

Similar Messages

Maybe you are looking for