Very slow working Satellite L30-10V

I've had my toshiba just under two years now and for pretty much as long as I remember its been very slow. Last week it died completly and kept telling me there was a harddisk error preventing windows from opening. I did the product recovery on toshibas advice and got my computer working again but its still as slow as ever, if not more! Theres nothing on here to even make it slow.
I've changed the power setting to a more efficient one, done a disk clean up and defragmented it but nothings changed. I have over 45GB free out of 59GB so I'm not sure that updating the memory would help?
I need advice please, HELP!

Satellite L30-10V
its been very slow. Last week it died completly and kept telling me there was a harddisk error preventing windows from opening. I did the product recovery on toshibas advice and got my computer working again but its still as slow as ever, if not more!
Sure sounds like the symptoms when a hard drive is dying.
The slowdown occurs because reads and writes to the drive must often be made multiple times before they are successful.
What does chkdsk have to say?
Check your hard disk for errors
-Jerry

Similar Messages

Very slow new Satellite L40

I'd be grateful for any help you guys can give me.
I have a new-ish Satellite L40 (bought last autumn). It's a dead basic machine -- Intel Celeron / 1.60GHz / 1015 RAM -- running Vista Home Premium. It was bought just to do word processing work + some very light internet use. The problem is that it runs very slowly (including taking forever to get going when I first turn it on).
I've virus tested it to death. I regularly run spyware detection / elimination programmes. I've cut the number of start-up programmes right back. All the results say I've got a clam machine. But still it's as slow as hell. And when I say slow, I can just about make a cup of coffee in the time it takes to access the net.
I've contacted Toshiba technical support, and the best they could suggest was that I reformat the hard disk, which is pretty drastic. If anyone out there has a better suggestion, I'd love to hear it. Right now, I'm rather regretting my initial purchase.
Thanks a lot -- Max
Message was edited by: ADMIN

> I've contacted Toshiba technical support, and the best they could suggest was that I reformat the hard disk, which is pretty drastic. If anyone out there has a better suggestion, I'd love to hear it. Right now, I'm rather regretting my initial purchase.
To be honest this drastic solution is not a bad proposal.
But what do you mean exactly with slow machine???
How long do you need for a booting?
Fact is that many applications are preinstalled on this notebook and this could be a main reason for a long booting. But fact is that many of these applications are necessary to run all the notebook features.
Furthermore a antivirus program which is running in the background and could affect the booting time. Long time ago I have used the Norton Antivirus and this software was a reason why my notebook was very slow... I changed it and now I'm use the freeware software like Antivir. It's much better...

Very slow working with eps files over new network

Please help!!!
Our IT has recently upgraded us from a OSX server to a 2 Terabyte SNAP SERVER 520.
I am using the only INTEL Mac in the department (we have another 10+ G5 PPCs running 10.4), and the only one using OSX 10.5. Since changing to the new server, I am also the only one with several file saving/opening issues.
I believe this is a network issue.
It is with mostly ADOBE products and we all know they will not support, working over the network. Due to the volume of files, I simply cannot drag files to my HD, and work locally. It is not practical. I also know that we have not had any issues in the past, and don't see why I can't get to the root of the problem.
**The most obvious issue is Illustrator .eps files.**
I can open and save .ai files in good time both locally, and over the network. There is no difference either way. HOWEVER, if it is an .eps file working over the network is not practical. I get the spinning wheel for about 2 minutes each time I open, save, or make a change. It is VERY slow. Working on eps files locally is fine (about the same speed as .ai files), but as soon as it hits the server, it is painfully slow to do anything.
Additionally, when saving Photoshop, Illustrator, InDesign AND Quark 7 files (direct to the network), I am regularly getting "Could not save because write access was not granted", or "Could not save becasue unexpected end-of-file was encountered", or "Could not save because the file is already in use or as left open" type errors.
I simply then click 'OK', and then hit save again, and it either gives me the same message, or it goes into 'save as' mode which lets me save the file (same name, and same location, but the original file has disappeared).
I am connected to the server IP address through afp:// but have also tried cifs://. IT have removed all access to the server through smb://, so I cannot try this.
ANY help is appreciated.

With regard to the EPS issue, I think I may have found the source of the problem for SMB users: the Suitcase Fusion plug-in.
Did you make any progress on these issues?

Black&white picture and very slow working HP Truevision HD

Hello!
Few days ago my webcam start working only in black&white and very slow - it's like slide-show.
Problem in any program (Skype, windows camera, youcam...).
I tried re-install drivers and even OS - nothing helps.

Hi @tcheshire ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY dv7-7255dx Notebook PC and issues with the WebCam in black and White and slow moving. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
When you look in the device manager do you notice anything with a yellow mark on it?
Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
Here is a document on how to troubleshoot and resolve issue with the Webcam.
Hope this helps you fix the WebCam.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Very slow working HDX18

Sorry guys, I am not sure if it is a hardware issue but since 2 months my HP HDX18 premium is working very slow. Originally it was working over vista. After it started working slow I changed last week to windows 7 home basic but it still runs very slow. Normally it becomes to be responsive after 10 minutes than booting and it takes very long times to run a program on it. try to install before as welll some performance check programs but they did not found anything. And there are only 2-3 programs on start up.

Metgun,
Welcome to the forum.
I have an HDX18. Not normal. Old girl is kind of a dog (only 4GB of RAM), the system cooks along just fine on Win7 Ultimate 64.
It is not normal for a system to run for ten minutes and then slow to a crawl.
Resource Hog!
I would suspect there is something in the file system - running and getting in the way of normal ops. See this link. It's a bit long - Check out the bit about how to run the Resource Monitor - Read about what gets in the way when things are not going well. There are links to Malwarebytes cleanup software, too.
Post: Freezing after Clicking on Desktop Icon
Resource Monitor:
Start > search / type "resour" > Click on "Resource Monitor
(You may also Right-Click and Send it to your Desktop as a Shortcut if you like)
NOTE: You can also get to the Resource Monitor from within the Task Manager.
Bad Disk?
Run some checks and Diagnositcs!
HP System Diagnostics (UEFI)
Description:   This package provides the HP System Diagnostics (UEFI) for the supported notebook/laptop models and operating systems. HP System Diagnostics is a UEFI-based hardware diagnostics program that is used to validate if a system is functional enough to start up the operating system. The diagnostics are accessed during startup by pressing F2 immediately after power on.
Hot System?
If you are running this old system on a bed, pile of clothes, on a carpet, and it's getting too hot, then you are baking it and it's suffereing heat-stroke. HDX18s don't run HOT like the new dv6-7s do, but they don't like to be smothered. Stick a Hercules X-stand under it and let it Breathe!
Too Much STUFF!
I don't know how much stuff you have on your HDX18. I finally overloaded mine. Just asked it to do more than it could do. Win7 (Ultimate) takes a bunch of resource... add some hefty photography software, a couple of monitors, a couple of external disks, Word (and the rest of the Office suite)... various other toys.. Web design tools for my web site. Poof! Flat system. Nothing WRONG, just couldn't DO it any more.   Add a poor, DCL internet connection (it is all I can get...) and I could-not-work.
Look at your system Load, your internet connection, your Anti-Virus, your drivers...
Consider turning OFF any fancy Backgrounds, any fancy pointers...
=========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Extremely slow working Satellite 1800 after OS reinstallation

I bought a second hand Satellite 1800. I collected all the drivers from the producers website, but when I formatted the HDD and installed WXP (my own copy, not any bundled software) the notebook works extremely slow... before during HDD read/write process you could hear that typical for it sound... now the hard drive is perfectly noiseless during operation as is slow as hell...
I tried to follow up with the web and it turns out that if I reinstalled the OS from Toshiba Recovery CD it should do the thing... too bad I didn't know I should have such CD when I was buying it... so now I don't have it... Is there anything I could do about it?
Plz Help
Q.

Hi
As far as I know this unit is delivered just with W98SE and WME. The recovery CD with WXP operating system for this unit is not created by Toshiba.
You can install WXP and use all drivers from Toshiba download site. I dont know how much RAM has your unit, but if the unit has under 128 MB RAM you can not expect that your unit runs fast.

LAN upload speed is very slow on Satellite C650D-108

Hey guys,
I have a problem with my Toshiba C650D-108 Notebook.
First, my english is a little bad... sorry for this.
My Upload-Speed via Ethernet is very very slowly (20 kb/s) , but via WLAN i have 14MB per Second! The driver and windows are new and reinstalled. The Ethernet-Cable etc. are fine. The Download-Speed via Ethernet AND WLAN is perfect (16 MB per Second)
But why? Please help me!
Thanks in advance!
Greets

Hello
How do you check the upload speed where do you upload something? Have you tested different browsers and different webspaces where you can upload files?
Usually the upload speed is depending on your Internet connection and not type of connection (WLAN/LAN).
Anyway, maybe updating the LAN driver would help. Just check the Toshiba website and reinstall LAN driver.

Satellite L30-10T - After XP downgrade it's very slow

Hello,
I have downgrade my Satellite L30-10T from Vista to XP Pro SP3 and I have installed all driver, but I have some problems:
All systems command are very very slow, isn't possible switch-off by XP command, install new programs is slow ....
thank you

Hi
Do you have yellow exclamation marks in device manager?
On the Toshiba website I have founded an installation instructions document. Did you follow this installation order for all drivers and tools?
Furthermore please check in device manager if you have enabled the DMA mode for the primary and secondary IDE controller.

MBP working very slow, rarely displays working wheel

Hi guys,
My MBP is working very slow.
I have taken off AVG, and in my user account I've stopped Soundflower from launching automatically. This seemed to help for a few days, then it's back to dragging.
I used Etre; but don't know the items mean...
Thanks so much in Advance.
EtreCheck version: 1.9.12 (48)
Report generated 16 August 2014 9:28:32 am GMT+7
Hardware Information:
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 16 days 1:7:35
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (76.15 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files:
/etc/sysctl.conf - Exists
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (1.0.1) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.1.1) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.1) Support
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sierrawireless.SWoCTool.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
Dropbox
Google Chrome
Notes
Messages
Calendar
Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.3.1 Support
Silverlight: Version: 3.0.50106.0 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
EPPEX Plugin: Version: 3.0.5.0 Support
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 226.37 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 77
Oldest backup: 2011-12-22 20:28:21 +0000
Last backup: 2014-08-11 11:05:24 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      4% WindowServer
      2% Image Capture Extension
      1% softwareupdated
      1% systemstatsd
      1% diskimages-helper
Top Processes by Memory:
292 MB Image Capture Extension
98 MB Finder
90 MB iPhoto
78 MB WindowServer
54 MB com.apple.quicklook.satellite
Virtual Memory Information:
21 MB Free RAM
824 MB Active RAM
798 MB Inactive RAM
635 MB Wired RAM
74.58 GB Page-ins
1.59 GB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Satellite L300-1BW - Is very slow

Hi, everyone!
Recently, I bought TOSHIBA SATELLITE L300-1BW (PSLB8E)
Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE&partNumber=PSLB8E-03F007EN&serialNumber=Y8805872q&USER_ACTION=Serial %20number
I need this for my study and home using. Computer working VERY slowly. Now I have a Windows XP Pro SP3 64-bit version. Programs what I have only Ms Office, Skype, Nero, antivirus - BitDefender. I do not play any games. Application Im using for my study only - Ms Word.
My computer was checked in service center and no any faults were wound - no any sofware and hardware damages, viruses, no any manufacture faults. Owners of these model please give me advice what to do. I stucked!
Do I need to install Windows XP 32bit or install Windows 2000 or any hardware upgrade (memory ... whatever)? I don`t want be disappointed by TOSHIBA!
Ill appreciate any HELP!

Hi buddy,
Can you be a little bit more detailed, please? What do you understand with very slow?
How long it takes to startup Windows?
How long it takes to start an application?
I have to say that Windows XP 64bit wasnt popular and there is no official support from Toshiba for this OS. If you want to use Windows XP, I can recommend installing the 32bit version.
Have you tested your notebook with factory settings? Does it work properly with preinstalled OS from Toshiba?
Im also Satellite L300 owner and I use the preinstalled Windows XP 32bit from Toshiba. Im very satisfied with this notebook, its pretty fast and need few energy. :)

Satellite A300-MM1 - start-up is very slow

I bought 3 Laptops (Satellite A300-MM1) a month ago but I noticed they were all very slow at start up (boot).
They took about 6 minutes till I saw the desktop and sometimes don't work.
Satellite A300 MM1 (harman/kardon)
Windows Vista Home Premium (Service Pack1)
Intel(R) Pentium(R) Dual T3200 @ 2.00 GHz 2.00 GHz
3.00 GB RAM
I thought it was the Antivirus but I put McAfee Antivirus in two of them and Kaspersky in the other but I faced the same problem.
What I should do?

I bought an A300 21H and start up was appauling so I took the following out and now I'm up and running in about 30 secs,
Tempro
Config Free
Toshiba power saver
Mcafee AV and now using Kaspersky
Chicony Tray
and disabled flash cards via control panel (can still use F keys)
When I first got my laptop it took 2 min to start up and battery life of between 1 hr 10min to 1 hr 30min
by removing the above my start up is under 30 secs and battery life is about 2hr 30 mins.
The programs were removed by using the RUN and typing msconfig
untick the boxes under the START UP tab that you dont want running
RESTART machine then CONTROL PANEL and uninstall them
Please note Mcafee needs a removal tool off their website to completely remove it..
Flash Cards was disabled only and not completely removed via CONTROL PANEL then PERFORMANCE ICON then top left hand corner MANAGE START UP PROGRAMS then DISABLE..........
Now your laptop will be very much quicker

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

Very slow working Satellite L30-10V

Similar Messages

Maybe you are looking for