Very slow write speed in SSD OCZ Vertex II (no Mac edition) in "Lion"

Hi guys
I have an iMac mid-2010: i7 2,93/8Gb/ATI HD 5700/1Tb HDD + OSX Lion 10.7.2
The SO seemed very slow, so I decided to add an SSD... In Apple authorized service center recomended OCZ Vertex II 120 SSD (no Mac Edition)...
Hardware instalation by Apple´s Service It´s OK, SSD show on Mac information (Spanish)
Before installing "Lion", I did a speed test, with these results
My surprise is that the SSD is very slow in writing... Read results speed It´s Ok...
FW up to update v1.35 (factory default)... And the install "Trim Enabler" because the result It´s the same...
What do you think is the problem?

I"m having the same (mostly) problem. Any thoughts?

Similar Messages

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!

For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting.

[Solved] Very slow write speeds to mounted partition

I have a separate partition for data which is set to automount on boot in fstab(I haven't gotten it to work any other way yet. Could be related?) and writing files from a download in Deluge to it was incredibly slow and affected the download speed grossly. I tested it by using the same download but selecting my local desktop as a save location. The download speed was at ~50KB/s using the data partition and 2MB/s using local desktop folder. Further, transfer speeds while trying to move the file to the partition after it was downloaded, resulting in a measily 70KB/s.
Is there something I'm missing, like some sort of buffer/write speed limit on the partition?
Here is how I have my fstab configured:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda6
UUID=bf68160f-aeb3-487c-9382-974fd5de5214 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda7
UUID=f0007457-bd8b-4e73-b794-e2474140af67 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda8 LABEL=Swap
UUID=4291c0ff-5bcb-48c5-b0cd-ecf08b428b2f none swap defaults 0 0
# /dev/sda5 LABLE=New Volume
UUID=48BEDF3ABEDF1F6E /media/Data ntfs rw,auto,user,sync 0 0
# /dev/sda2 LABLE=Windows Seven
UUID=01CD79C6BF162F00 /media/Windows ntfs rw,noauto,user,sync 0 0
Any clues? Thanks
Last edited by Kirito (2013-05-17 04:34:32)

WonderWoofy wrote:Yes, as it is an internal partition, and therefore forced removal is really not an issue, I am not sure why you are using sync in the first place. The way I understand it, the sync option is really to be used when you have some kind of removable drive. That way, when you copy things to it there isn't the usualy buffering, resulting in the process reporting completion instantly, when really there might be hundreds of megabytes waiting to be written.
Yeah, after reading up on it a bit more thats exactly it. I wasn't exactly sure how it was handled/where it cached or stored the file temporarily before writing to the disk and being on a relatively small partition space is of concern. Although looking back it was silly because it's not like I'll be transferring anything that large anytime soon
Anyway, this fixed it. You guys rock

Mac Pro slow write speed on Samsung SSD drive

Hi,
I am wondering why I get very slow write speeds on my Samsung SSD 840 Series 250 GB system startup drive in my Mac Pro (early 2008).
I get an average write speed of approx. 35 MB/s and not much more for top speed. I tested it by transfering a large file (8GB, .m4v) from my Mac Pro internal Raid 0 (4x 2TB Stripe Set) delivering up to 550 MB/s. The read speed of the SSD is around 270 MB/s which I consider to be OK for that I have just the 3 Gb/s internal SATA interfaces in my pretty outdated Mac Pro.
I don't see any Memory or CPU overruns or consuming system tasks while doing the tests and no other user programs except Activity Monitor is running. The following screen shots from the Activity Monitor should proove my findings:
Setup:
Samsung SSD 840 Series 250 GB (SATA 6Gb/s and 3Gb/s compatible) system startup drive. Free Space left on SSD is around 100GB of 250GB.
Mac Pro (early 2008, Model 3,1), 2 x 2.8 GHz Quad-Core Intel Xeon, 8 GB RAM, NVIDIA GeForce 8800 GT 512 MB.
OS X Mavericks 10.9.1
Samsung sais there should be 540 MB/s for Seq. Read and 250 MB/s for Seq. Write for their SSD drive.
Any hints what could be done to increase especially that low write speed of around 35 MB/s (average) on the SSD in my Mac Pro?

Really great 'The hatter' !!!
Thanks a lot for your exceptional support.
Next to my 4x discs in the 4 SATA II drive bays I have installed a additional OWC drive kit that allows me to have another 2 disks sitting in the empty bay below the CD/DVD drive and those are connected to the motherboard. So there is a lot to handle for that controller you mentionned ;-)
I will follow your guidance and boot from my 'maintenance' system on direct attached external drive, install the TRIM Enabler there as well and do the DU repair run. I always have a separate system available that gives me the chance to boot my Mac from there. And in addition I regularly use ONYX to keep my OS X clean and do the maintenance.
Anyway, you're the man of the day!
PS; I am looking forward to finally receive my new Mac Pro (late 2013) ordered on the 18th of December one of these days and then I hope that I can fly ;-)

Bluetooth issues on MBP 15 Mid 2012 with SSD OCZ Vertex 4

Hello,
I work on MBP 15 Mid 2012 with SSD OCZ Vertex 4 and I have problem with my bluetooth (mouse sometimes is very slow, laggy, the same problem with keyboard, keys are working with a delay) Unfortunately it happens only with SSD drive and when I have plugged oryginally, apple’s drive everythink it’s ok. Software, firmware are the latest, I tried each reseting (PRAM etc...) and nothing helped. Do you have any ideas?

Same combination and same issue. I see a thread about this here:
https://discussions.apple.com/message/21659917#21659917
My guess is that the SSD is causing interference with the bluetooth somehow.

Very slow broadband speeds

Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.

Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation.

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

Very Slow Download Speed

Hi,
I am experiencing very slow downloading speeds, when I am just normally downloading something in Safari, or downloading a torrent with upto 100 seeders.
The maximum download speed I have seen on my computer is 80kb/s, which is painfully slow for downloading the Adobe trials, when they reach about 1gb.
I have a router, connected to 2 computers, and speedtest.net has told me that my download speed is 1mb/s.
It seems like download speeds are being restricted to 80kb/s, so is there any way to 'unlock' full potential downloading speeds?
Any help much appreciated!
-Ollie
Message was edited by: Ollie A

I think you're making the same mistake a lot of people make.
The maximum download speed I have seen on my computer is 80kb/s
Safari reports downloads in kiloBYTES per second, not kilobits, so that 80KB/s translates to about 640 kilobits per second.
downloading the Adobe trials, when they reach about 1gb
Really? 1 gigabit per second? I assume that's a typo.
speedtest.net has told me that my download speed is 1mb/s
therefore your downloads are progressing at about 64% of maximum. That sounds about right - you won't get maximum throughput for every download - it will vary based on server location, network load and more.

Very slow download speeds with ATT U-Verse

Hello,
Experiencing very slow download speeds with Macbook Pro 2011, on Lion, and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
Any suggestions welcome!
Thanks

Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

Very slow upload speed via infinity 2 (business) u...

Very slow upload speed via infinity 2 (business) unlimited after phone line fix (street cabinet) ?
Had my line fixed today by engineer (no dial tone).
Download rate near normal but upload = 0.73Mbps!?
I reset modem and router after he left and appreciate my profile is probably in need of some TLC after a weeks line fault, but is this normal in this situation? I heard it can take some time to reprofile my line and before it was fixed it was even worse at 0.10Mbps
Just seems very low considered the line is now operational again.

48Hrs+ on from residential line reconnection my business infinity 2 broadband upload speed is now approaching normal speed levels.
What a 10 days that was all because some ass disturbed the cabling in the street cabinet!
Yes I'm aware I have business broadband and am talking about it in a residential based forum, but my actual phone line is still residential that it is supplied over and the business broadband product is much the same animal as that supplied to residential customers i.e. Infinity 2 Unlimited. Only the mail and option of static i.p. appear different - that is all.
Jeez.

VERY slow broadband speeds (0.76mbps) Phoneline?

VERY slow broadband speeds (0.76mbps)
Options
on 28-10-2012 12h38
ROUTER STATISTICS
System Up Time: 0:08:24
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLAN
MER
2351
2177
0
136
104
0:00:56
324
0
0
0
0
0:08:24
6762
6743
0
164
132
0:07:57
ADSL Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin
766 kbps
414 kbps
48.5 db
27.1 db
15.7 db
16.3 db
I'm with Sky, and have had very slow broadband for a while now. Above are the statistics from the test socket. Sky seem to think there is a problem with the line. I've now plugged the router into the main socket.
Any help would be appreciated.
**EDIT** My phone line is with BT, my broadband is with Sky. The problem Sky says is with the phone line it seems.

Hi Joe,
Try sticking your telephone number into this line tester page and let us know if it finds a fault. If it comes back clear, you'll need to go back to Sky as there'll be no issues with your telephone line. If it comes back with a line fault, we can get it progressed towards a fix
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Very slow connection speed

Very slow internet speed past 10 days. Have completed 1) VIOS recommended optimizer; 2) speed check (3.1 down, time out on upload); 3) diagnostic check (never completes analyzing); 4) turning router and devices off/on. Any other suggestions appreciated. Thanks

PLEASE NOTE MY LOCATION.
MY FiOS SERVICE MEETS MY NEEDS
Tom
Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
Data Object 39.45
Attachments:
FiOS Internet Speed Tests 1 5 2014.pdf ‏41 KB

Very slow download speed with intermittent halts

Need some help.
I run Apple os/x latest version and have since yesterday begun to experience constant very slow download speeds.
I have rebooted the router and I have reset it. I have tested with wireless and wired into router. No real change.
The results are below and are pretty consistent no matter when or with what computer I test it with.
This is very frustrating and I would like to know if anyone has experienced this and if there is anything I can do before calling for service.
Thank you in advance.
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [131768]
running 10s outbound test (client to server) . . . . . 5.44Mb/s
running 10s inbound test (server to client) . . . . . . 1.94Mb/s
------ Client System Details ------
OS data&colon; Name = Mac OS X, Architecture = x86_64, Version = 10.8.2
Java data&colon; Vendor = Apple Inc., Version = 1.6.0_37
------ Web100 Detailed Analysis ------
Client Receive Window detected at 359104 bytes.
10 Mbps Ethernet link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 22.89 msec; the Packet size = 1448 Bytes; and
There were 159 packets retransmitted, 288 duplicate acks received, and 394 SACK blocks received
The connection stalled 9 times due to packet loss
The connection was idle 2.01 seconds (16.75%) of the time
This connection is sender limited 35.49% of the time.
This connection is network limited 64.51% of the time.
Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: ON
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [71.100.xxx.xxx] but Client says [192.168.1.9]

Both wired or wireless.
auto - negotiate
Thank you.

E1200 router: very slow download speeds, ok uploady got

I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.
When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
What could the problem be?

So we could have this isolated, check how much speed you’re getting straight to the modem so we’ll have some point of comparison that from your internet provider. If through the router, you have struggles with not getting an acceptable value for download speed especially if it only happens with the wireless connection, you can try these: change the wireless channel and the wireless security on the router. If on the router, you have the channel set to auto by default change it to (3,6,9,11), just have to play around with it. Moreover, for the wireless security, select WPA2 Personal. If that doesn’t make any difference, update the firmware of the router, reset and have it reconfigured.

Why i have very very slow downloading speed on wifi on iphone5

While on wifi I am experiencing very slow downloading speed on iPhone 5. My iPhone 5 is a brand new phone, I have to wait for hours to complete a running download of about 40mb or so. Please help me and tell me if there is any solution to that. On the same wifi network I have the new iPad and iPhone 4 and iPhone 4S, all are working perfectly getting perfect speed while downloading but I can't on iPhone 5.

What you did was fine. Leopard is a little different to 10.4.11, but:
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.

Very slow write speed in SSD OCZ Vertex II (no Mac edition) in "Lion"

Similar Messages

Maybe you are looking for