Very slow, zaberaet all the RAM! I have a Macbook pro retina 8gb it does not pull Очень медленно работает,заберает всю оперативную память! У меня Макбук про ретина 8 гб его не тянет
Very slow, zaberaet all the RAM! I have a Macbook pro retina 8gb it does not pull
Очень медленно работает,заберает всю оперативную память! У меня Макбук про ретина 8 гб его не тянет
Agreed! This bug with the ringtone delay (№4.1) is really annoying
Similar Messages
-
I have a macbook pro retina and a macbook air which I just purchased, I want to share all of the music on the retina with the air.
The simplest way is to use an external USB drive. Copy the iTunes folder to the drive while it's connected to your MBP. When done eject the drive. Connect the drive to the MBA. Navigate in the Finder to the /Home/Music/ folder on the MBA. Copy the iTunes folder from the external drive into the /Home/Music/ folder.
OS X Mountain Lion- Drag and drop.
If you have a backup of your MBP, then you can use it to restore the /Home/Music/iTunes/ folder to the MBA. -
Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.
Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379 -
Very good. I have a macbook pro retina 15 "First Generatio.
Very good.
I have a macbook pro retina 15 "First Generation.
I read that you can not increase the memory or video card to me is worrying that neither the apple house can do that, because it is way too expensive equipment, not to increase capacity.
I do not think that's impossible, I would like to know about this is disturbing please.
Thank you.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?
Hello
I have a macbook pro 2.33 ghz intel core 2 duo with
2 GB 667 MHZ DDR2 SDRAM
What is the RAM limit i can install? 3GB or 4GB?, how do i know that? I dont have the manual.
thank you
Leo.What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?
3GB. You can install 4GB. The computer will only utilize approximately 3.3GB though.
http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .33-15-specs.html
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
Mac611 Mobile Mac Support - about.Mac611.com
iTunes:MacOSG Podcast | YouTube.MacOSG.com
An Apple User Group
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.' -
I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?
tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port. -
I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).
It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/
-
How long does it take to delete all the files in a lost MacBook Pro?
How long does it take to delete all the files in a lost MacBook Pro?
Quite a while since there may be 1/2 million files or more to delete. There is only one quick way, and that is to reformat the drive.
-
My macbook has suddenly started flickering. I hadn't updated any software. I did go and update to OS X but that didn't help. Is anyone else having the same problem?
Hello abmorgan646
Check out the article below to try out a few things to resolve issues with the flickering display on your MacBook Pro Retina. You may need to reset the NVRAM, if it does not resolve the issue, then there are links fur further assistance.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G. -
Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?
They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply?
Did you cause the nick? Or did it just appear one day? There are reports of the retina screen having exploding pixels which leaves a hole in the screen that can be felt when you rub your finger across it. If that is what happened then it should be covered under the warranty. If you caused the nick then it is not covered and the fix will be very expensive, somewhere in the $1000 range.
astets wrote:
I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply? -
Scratch on the Edge of the Aluminium cover on my Macbook Pro Retina 13"
I have a Macbook Pro Retina 13" just bought it in October 2013. I found there is a scratch on the edge of the aluminium cover. I am not asking for any replacement. But, is there any way to remove the scratch since it scratch my hand and it's possible my child will get hurt from this scratch.
No, not possible
If it "hurts your hand" its not really a scratch but a gouge or a BUR
removing a bur or a gouge is easy enough, the problem is youll be left with a nasty shiney spot, .....are you prepared to do that?
youd mask off the area with painter tape and take a thumbnail size of ultra-fine sandpaper and remove the bur or gouge just enough to not make it sharp
however this will make the spot look much larger and much worse
Having polished metal for many many years, I can tell you matte aluminum is extremely hard to buff out
Remove the scratch? EASY
matte aluminum, very very hard
1. remove scratch
blend it
raise it
blend it out
lower the whole blended area
These are professional skills and if you TRY to remove the scratch, youll make it look horrible, a big shiney spot. -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT
Maybe you are looking for
-
Will I lose my songs and pictures if i upgrade my iphone to the 5.0 version if the computer i am going to do it on is not the original computer i had itunes on, my old computer died!
-
Send bulk mail in oracle apps 11i with pdf/Xls attachment
hi, I have a task how can i send bulk emails in one go ( aprrox 150-200 emails in one go) in oaracle apps 11 with attachment pdf/xls thanks
-
Trave & Expenses: Credit Card Imports - alternative app to WD Java
Hi All, We've recently upgraded the portal from 7.0 to 7.4 and were using the Credit Card Imports WD Java application, which is not supported anymore since 7.3+ (SAP Note 1812863). I did take a look at the help site for T&E EhP2 and its not very obvi
-
Need help Flex Application and Dataservices
Hi, Is that possible to have two servers in 1 i will host my flex application in the 2nd i will host the data service application. ie my flex application talks to the remote object sitting in another server Thanks in advance..
-
Relay Server with a Http 500 error (SUP 2.2)
Hello experts, The history is the following, after upgrading my unwired server from SUP 2.2 SP 02 to SP 05 the aplication stopped working. We could get Register, but we could but not synchronize. We connected the device directly to SUP and it worked