Very Strange #1503 Script Timeout Error...

So I created an as3 flash 9 app under Windows using cs3.
Worked great ... until I tested it on Mac. It crashes both safari
and firefox only on macs.
I decided to load it up in cs3 on Mac. I received some errors
about the fonts not being available, so I changed them to default
_sans or whatever and thought I had solved my problem. I tried
"Test Movie" and got the following:
Error: Error #1503: A script failed to exit after 30 seconds
and was terminated.
at flash.errors::ScriptTimeoutError$iinit()
at flash.display::MovieClip$iinit()
The weird thing was that it wasn't even running 1 second when
this was output.
It gets better though, I delete all the actionscript, and
every layer (added a blank layer) in the movie, and all the assets
and I STILL GET THIS ERROR!
Whats going on? I'd rather I didn't have to recreate all the
layers and copy over the actionscript to a new movie .... maybe
there is a setting somewhere? Maybe its related to the font
problem? This is my first flash movie and I'm not sure where to
look at this point, google didn't help at all...
Thanks in advance!

Thanks OMW_Support. That was real neat support. Thanks, it worked!
Essentially, OMW gives an error if you try to install it into 7.3.4 home, so I had actually installed it into a different home. But while running the startOMW script, as you pointed out the ORACLE_HOME variable was set to 7.3.4; changed it to the second ORACLE_HOME and it worked.
Kind regards
Manu
<BLOCKQUOTE>quote:<HR>Originally posted by Oracle Migration Workbench Support:
If you are not running Oracle 8.1.7, then you need to install Oracle Migration Workbench 1.3.0.0.1 into a separate Oracle Home.
The installer will install the required 8.1.7. client libraries and you can then use it to migrate to an Oracle8 or Oracle8i database. The key issue here is that when the Installer asks you to select or enter an Oracle Home, that you enter a new Oracle Home. (If you already had 8.1.7, then you'd have been able to install into an existing 8.1.7 Oracle Home. However, because you are not, then you need to install into a separate Oracle Home).
ORACLE_HOME needs to point to this new Oracle Home when starting the Migration Workbench. Your log shows that it is pointing to an Oracle 7.3 home, which is incorrect.
Please note that the Migration Workbench only supports migrations to Oracle8 and Oracle8i.<HR></BLOCKQUOTE>
null

Similar Messages

Script timeouts (Error #1502) and WebService component

Hello Flex community,
I am getting a script timeout (error #1502) when I am calling a SharePoint Web Service (CopyIntoItems) when trying to upload large files (greater than 40 MB).
The error does not occur when using the Web Service for smaller files. The large files can be uploaded directly to SharePoint using the web interface therefore it is not a back-end SharePoint issue.
I believe the issue has to do with the logic in the WebService Flex component, however I am not sure how to optimize it and I cannot break down the file into smaller chunks as it needs to be together in order to upload with the SharePoint field information.
Anyone have any ideas on how I can resolve this issue?
Thanks,
Mauricio

I can't say exactly what is big binding because it depends on combination of factors: how fast your machine is, how big the Excel model is, how many components you have etc. Generally if you have bindings with several thousand cells it's going to cause the timeout problem. The problem is that we use Flash player in the application, and if some operation takes longer than a minute it times out. So, if getting data from the big bindings took too long, the flash player stops the operation and you have this timeout error.
You see the timeout error only if you have debug version of Flash player installed. If you have release version installed, you don't see any erors, but you notice strange things, for example selecting component on the canvas does not cause property sheet to display. Release version of Flash is faster, so you can try to remove debug flash player and install release and there is chance that it will work.
FP1 version is going to include some optimisations to reduce this problem and allow working with larger files.
Margaret

Script Timeout error in classic ASP

Hi ,
In classic asp , i am using Stored procedure to fetch the result from oracle database . my database have 85Lakhs records . approx. 30 records are being inserted into the table. at the same time some users trying to fetch the data from same table.now i am getting script timeout error after long wait .it was an intermittent issue (sometimes it is working and sometimes it is not working). i thought it was because of performance issue with stored procedures . but in oracle Readers cannot block writers and Writers cannot block readers.so no issues with database side.i couldn't replicate the issue . i am wondering what will be the rootcause for this issue. is there anything i need to modify with the script side.by increasing the timeout property is the only solution?i tried to modify the timeout property to 180 seconds in classic asp page. please give your valuable suggestion.
Thanks.
Regards,
Boss

Hi,
This error is thrown by the Flash Player when a script takes more than 15 seconds to execute i.e. if your script executes continously for 15 seconds with out letting the Flash Player render the UI, this error is dispatched. Probably the data returned is pretty huge, try splitting the data or use pseudo threading as explained in the URL below.
http://blogs.adobe.com/aharui/2008/01/threads_in_actionscript_3.html
http://www.actionscript.org/forums/showthread.php3?t=185320
Hope this helps.

VERY STRANGE Interactive Report Filter Error

I have a very interesting problem happening with an interactive report in my APEX application. The report runs just fine and has been in use for about 6 months. Just recently, the users have begun to run into problems when using the filter capability within the report. There is a specific column heading (RH Analyst) that they typically click on and select a specific analyst name (the list contains 10 entries). Most selections from the filter list work fine. However, when one specific name is chosen, they get the dreaded ORA-06502: PL/SQL: numeric or value error: character string buffer too small+* error.
I have been working to narrow the problem down and have found the following:
1. The filter error is related to the content of one specific column (not the one I am filtering on)
2. The column that is causing the error is a CLOB datatype
3. The data in the CLOB column was inserted into the database from a form utilizing an "HTML Editor Standard" type of item
4. The data in the CLOB column was copied and pasted from an email that was being viewed using Outlook 2007
5. If I try to recreate the problem with exactly the same information, but copied and pasted from Outlook 2003, I don't experience the problem.
6. The only people experiencing this problem are people who have upgraded their system from Microsoft Office 2003 to Microsoft Office 2007
7. When I try to load the form with the data that was stored in the database, I get a 404 page not found error. This is the same error that I get if more than 32k of data was saved into the CLOB.
The data pasted into the HTML editor from Outlook 2007 (_this is the data that causes problems_) and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) <meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<meta content="Word.Document" name="ProgId" />
<meta content="Microsoft Word 12" name="Generator" />
<meta content="Microsoft Word 12" name="Originator" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_filelist.xml" rel="File-List" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_themedata.thmx" rel="themeData" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_colorschememapping.xml" rel="colorSchemeMapping" /><!--[if gte mso 9]><xml>
<w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true"
DefSemiHidden="true" DefQFormat="false" DefPriority="99"
LatentStyleCount="267">
<w:LsdException Locked="false" Priority="0" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Normal" />
<w:LsdException Locked="false" Priority="9" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="heading 1" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9" />
<w:LsdException Locked="false" Priority="39" Name="toc 1" />
<w:LsdException Locked="false" Priority="39" Name="toc 2" />
<w:LsdException Locked="false" Priority="39" Name="toc 3" />
<w:LsdException Locked="false" Priority="39" Name="toc 4" />
<w:LsdException Locked="false" Priority="39" Name="toc 5" />
<w:LsdException Locked="false" Priority="39" Name="toc 6" />
<w:LsdException Locked="false" Priority="39" Name="toc 7" />
<w:LsdException Locked="false" Priority="39" Name="toc 8" />
<w:LsdException Locked="false" Priority="39" Name="toc 9" />
<w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption" />
<w:LsdException Locked="false" Priority="10" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Title" />
<w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font" />
<w:LsdException Locked="false" Priority="11" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtitle" />
<w:LsdException Locked="false" Priority="22" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Stro..."The data pasted into the HTML editor from Outlook 2003 and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) “Implementation and Compliance Update #2” addresses a concern that clearinghouses may be in some cases inappropriately charging providers for the use of a standard transaction. <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal"> In particular, we cite MN Statutes 62J.536, Subd. 1f, which states that: Group purchasers may not impose any fee on providers for the use of the transactions prescribed in this subdivision. The update explains that “payers (or their agents) may not charge for receiving a standard transaction” and provides additional information. The update is accompanied by a joint cover memo from MDH, the Minnesota Department of Commerce, and the Minnesota Department of Labor and Industry. Note: The Minnesota Department of Health (MDH) is charged with implementing and enforcing Minnesota Statutes, section 62J.536. In addition, the Minnesota Department of Commerce and the Department of Labor and Industry administer additional statutory requirements for electronic claims submission, consistent with MS § 62J.536. <o:p></o:p></li>
</ul>
“Implementation and Compliance Update #3” provides a reminder of the upcoming Dec. 15, 2009 effective date for rules for the standard, electronic exchange of health care remittance advices. It also clarifies that: <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal">Statutory requirements for standard, electronic remittance advices do not include requirements for electronic payment (electronic funds transfer – EFT) <o:p></o:p></li>
</ul>
<ul type="disc">
 <li style="" class="MsoNormal">Consistent with MDH’s enforcement policies and plans described in Update #1 (posted 6/5/09): <o:p></o:p></li>
</ul>
o Starting Dec. 15, 2009, group purchasers (payers) must be able to transmit – and providers must be able to accept - standard, electronic RAs via computer-computer electronic data interchange (EDI). So long as payers and providers are able to exchange the remittance advice standard transaction electronically, the Department does not take issue with payers making available additional mechanisms for communicating RAs to providers, such as access to portable document format (.pdf) files, or provider electronic mailboxes. <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal">The Department’s determinations of whether payers and providers are complying with the regulations will take into account several factors. However, we have determined that it is not realistic to require electronic remittance advices when claims ar..." I am using APEX version 3.2
Any help would be greatly appreciated. For now, my short term solution for them is to copy the information from Outlook 2007, paste it into a Wordpad, then copy it from wordpad and paste it into the HTML editor control. That seems to work fine but it is not a very nice solution for the users!
Thanks,
Dale

Roel,
Hey there! Hope you enjoyed your time off ;) Thanks for having a look...
Yes, of course I "could" update the functions, but this is NOT something I want to do. I'm one of those people that subscribes to Coding by Contract and the assertion routines at the beginning and end of my subprograms are an important part of that.
This may be a lack of understanding on my part with regards to the order in which Oracle does it's thing - or a bug in Apex... I'm able to duplicate the problem on apex.oracle.com: dmcghan/test/test.
Log into the demo app with admin/dmcghan. The home page has an interactive report, filter the name and you should get the error. When you look at the query you'll see a filter in the where clause that goes against the apex_collections table. This is populated from the post-authentication procedure. Let me know if you have questions.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur

Very strange error: unable to activate any messgae mapping in IR

very strange error,
i m unable to activating any message mapping in IR,
while activating the error thrown was:
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
My observation:
On looking at the error, i found that the folder Mapdddd0cb0100311dca6090012799eddc6 is not created at the proper place.....
Which i assume is created dynamically created on activating a message mapping,
Now, i saw that the directory in which these Map* folders were created, already contained 32765 folders....... since this machine is UNIX, the max no. of directories that can be inside a directory cannot be more than 32768(not confirm).....
hence the folder Map* cant be created at the proper place...and hence message mapping cant be activated.........
ever encountered this problem....................
pls help

solved by self,
solution: delete temporary folders created during any activation of message-mapping in IR, in the classpath_resolver folder of XID HOME directory......
solution is specific to file system/OS....

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Very strange error in text properties - AI CS6

Hello Everyone,
This morning I found very very STRANGE error in Adobe CS6 about text properties. Here you go.
In the picture one text 'ei and mosterd' was bold.
But after copy to new string the bold characters are changed to 'ig and mosterdz'.
This is very strange error I have seen ever.
Do you guys have any reason why CS6 act like this?
also do you have any option to fix this issue?
For your information:
I just done copy past. Nothing else.
All the properties are same for both.
No difference except the text string size
I tried the same file in different machines for check. But I still see the same error in all the machines.
System properties:
Mac os x: 10.8.5
Processor 2,8 Ghz Intel Core i5
Memory: 8 GB
Software: Adobe CS6
Regards,
FroQ

Wow, this is absolutely incredible... you try to parse an empty String to an int and it throws an exception... I'd never have thought.

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Why is my startup script getting a timeout error in FrameMaker?

Using FM 11
ExtendScript
Windows 7
I'm running an ExtendScript from the FM Startup directory, by starting FM from a batch file. The Extendscript opens multiple book files (one at a time) and does a save as pdf for each one. FrameMaker terminates the script with a timeout error at random points in the script after only one or two saves. The Extendscript runs fine when I run it from the FM Scripting window. It only times out when I run it as a startup script. Is there some workaround for this? Sadly, I find no documentation about this.

Thanks, Rick. Here is the body of the Extendscript that is in the FM Startup directory. The batch file starts FM and then this script gets kicked off.
main();
function main() {
 log("Starting the script.");
 var controlFile = File("G:\\fmToPdf\\fmToPdf.control");
 var controlContent = null;
 if(controlFile.exists === true) {
 // Open the file.
 controlFile.open("r"); // r means read only.
 // Read the file contents into a variable.
 controlContent = controlFile.read();
 // Close the file.
 controlFile.close();
 var bookRegEx = /^book="(.*)"/;
 var targetRegEx = /^target="(.*)"/;
 var pathRegEx = /([^\\]+)$/;
 var lines = controlContent.split("\n");
 for (i = 0; i < lines.length; i++) {
 var line = lines[i];
 if (bookRegEx.test(line) === true) {
 var result = line.match(bookRegEx);
 var inBook = result[1];
 var pathComponents = pathRegEx.exec(inBook);
 var fileName = pathComponents[1].replace("book", "pdf");
 for (i = i + 1; i < lines.length; i++) {
 line = lines[i];
 if (targetRegEx.test(line)===true) {
 result = line.match(targetRegEx);
 var outBook = result[1] + fileName;
 log("Starting to generate: " + outBook);
 fileId = openBook(inBook);
 saveBook(fileId,outBook);
 closeBook(fileId);
 log("Finished with: " + outBook);
 } else {
 break;
 // close FrameMaker
 Constants.FF_CLOSE_MODIFIED = 1;
 app.Close (Constants.FF_CLOSE_MODIFIED);
 log("We're done.");
 return;
function openBook(filename)
 var openProp = GetOpenDefaultParams();
 var retParm = new PropVals();
 var BookOpen=Open(filename,openProp,retParm);
 return BookOpen
// save as pdf
function saveBook(file, pdfName)
 var saveProp = GetSaveDefaultParams();
 var i = GetPropIndex(saveProp, Constants.FS_FileType);
 saveProp[i].propVal.ival = Constants.FV_SaveFmtPdf;
 //i = GetPropIndex (saveProp, Constants.FS_DontNotifyAPIClients)
 //saveProp[i].propVal.ival = true;
 var retParmspdf = new PropVals();
 // pdf settings
 file.PDFBookmark = true;
 file.PDFBookmarksOpenLevel = Constants.FV_PDFBookmarksOpenDefaultLevel;
 file.PDFConvertCMYKtoRGB = true;
 file.PDFDistillerAbsent = 0;
 file.PDFJobOption = "High Quality Print";
 file.PDFSeparateFiles = false;
 file.DocIsViewOnly = 1;
 file.Save(pdfName, saveProp, retParmspdf);
 return
// close file
function closeBook(filename)
 filename.Close (Constants.FF_CLOSE_MODIFIED);
function log(message, reset)
 var logfile = File("G:\\fmToPdf\\fmToPdf.log");
 var openMode = (reset === undefined) ? "a" : "w";
 logfile.open(openMode);
 logfile.writeln(getTimeStamp() + " " + message);
 logfile.close();
function getTimeStamp(){
 var d = new Date();
 var timestamp = d.getFullYear() + "." +
 zeroFill ((d.getMonth() + 1), 2) + "." +
 zeroFill (d.getDate(), 2) + " " +
 zeroFill (d.getHours(), 2) + ":" +
 zeroFill (d.getMinutes(), 2) + ":" +
 zeroFill (d.getSeconds(), 2);
 return timestamp;
function zeroFill( number, width )
width -= number.toString().length;
if ( width > 0 )
 return new Array( width + (/\./.test( number ) ? 2 : 1) ).join( '0' ) + number;
return number + ""; // always return a string

Shell Script Resource-Timeout error

Hi!!
I have an issue with the Shell Script Resource, the problem is as follows:
When I created a user in this resource and appears a error message:
com.waveset.util.WavesetException: An error occurred adding user 'user01' to resource 'Shell Script'. com.waveset.util.WavesetException: Script failed waiting for "_,)#+(:" in response "" com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "".
I added the timeout property = 300 000 in my shell script is as follows:
<ResTypeAction restype='Shell Script' timeout='300000'>
but it doesn't work.
I had the IDM 8 with the patch 4 but the problem beging when I did upgrade to patch 4 to 6.
Does anyone knows what could be the problem.
Thanks in advance!

Hello!
That isn't the problem the test connection works fine but when I try provisioning a user the shell script execute some instructions, in the shell script I need to set the timeout property in order to give more time to finish execute the instructions before the script execute the following command.
I tested the timeout property in the shell script and work to fine for IDM 8 patch 4 I upgrade to patch 10 and stopped to work.
Does anyone knows What could be the rigth way to set the timeout property in a resource action for shell script resource?
Thanks...

Shell Script: Timeout and return error if Sqlplus hangs

Shell Script: Timeout and return error if Sqlplus hangs
Dear all,
This morning, our production database hung with lots of ORA-600 and 7445. The issue has been escalated to Oracle Tech support but my monitoring script which tries to make a connection every 5 mins to the database to see if its up, did not alert me. The reason is that, it connected to the database and hung, never came out to report an error and so I never got alerted until a user called me.
Can any one tell me how I can exit from the sqlplus block if I dont get a response in x seconds? This sqlplus block is being called with in a shell script.
Any help is highly apprciated.

I don't know of anything built into any shell scripting language that would do this, no. I'm not a Perl programmer, but I have a vague recollection that Perl may have something useful here.
From the "separate thread" part of my comment, though, you could certainly spawn a separate thread (thread 2), have thread 2 wait a period of time, then look for a message from thread 1 and throw an error if the message hadn't been sent. I don't know that I'd be for writing multi-threaded shell scripts, though. The heartbeat also gives you a layer of redundancy so that something is monitoring the monitor in case that process stops working.
Justin

Firefox becomes unresponsive (has timeout error) when trying to print very long webpages (e.g. 100 pages).

I need to print off one long webpage containing a whole load of customer invoices. For anything up to about 40 pages this is not a problem. However, if the webpage contains more pages Firefox is unable to cope.
While data is being sent to the printer a little green progress bar appears. This bar continues for a while and then stops. Some sort of timeout error appears (i can't remember the wording) and firefox becomes unresponsive. I have to start task manager in order to close Firefox.
I then have to open a different browser in order to print the long webpage.
Anyone know of any settings I can play with to fix this?

Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

Very strange airport config error on MBA

Hello
I am experiencing a very strange problem on my MBA.
I am trying to setup some manual proxy settings on a particular WiFi network I connect to. Yet not only do my network settings not stay saved (and therefore do not work) but as I type sometimes it changes the screen to the pac file configuration option.
Even when I do get to actually type it in the system clearly doesn't save the settings. I can't connect to any website and when I open up network settings again the proxy settings are not saved and it brings me to the PAC file option straight away.
Any thoughts?

Resetting router, deleting all related prefs and deleting all (disabled) bluetooth devices has made no difference, it's so annoying to have to manually click the airport icon, let it find the router then click it everytime the machine starts up. I have no ideas!

VERY strange lag on a Dell Optiplex 760

I thought it would be a good idea to keep a 16GB flash drive on my keychain that booted Arch so I could work on HW for college in a consistent OS! Everything is working great so far, but I ran into a very strange problem with a Dell Optiplex 760. During the normal Arch init process, everything loads great, except for when it gets to the udev stage where everything hangs. But here's the strange part of this scenario: the problems go away when I start typing random keys or move the mouse! If I don't do this, the system hangs completely from what I can tell. This happens at the console and with X.
The service tag for this machine is FDCQQJ1, and the dell.com driver area brings up this list of hardware and (windows) drivers for it.
Here's the #lspci -vv of the system:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec90 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41d1
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 000000007e000000-000000007e1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 000000007e200000-000000007e3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 027f
00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at eca0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecb0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
I have googled around a bit, and I've read about others (surprisingly) having the same issue, but I've found no answers to my avail yet.

Here are the packages installed on my system, with versions (output of pacman -Qs):
local/a2ps 4.14-1
a2ps is an Any to PostScript filter
local/a52dec 0.7.4-4
liba52 is a free library for decoding ATSC A/52 streams.
local/acl 2.2.48-1 (base)
Library for filesystem ACL support
local/alsa-lib 1.0.22-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.22-2
An alternative implementation of Linux sound support
local/aspell 0.60.6-4
A spell checker designed to eventually replace Ispell
local/ati-dri 7.7-1
Mesa DRI drivers for AMD/ATI Radeon
local/atk 1.28.0-1
A library providing a set of interfaces for accessibility
local/attr 2.4.44-1 (base)
Extended attribute support library for ACL support
local/autoconf 2.65-1 (base-devel)
A GNU tool for automatically configuring source code
local/automake 1.11.1-1 (base-devel)
A GNU tool for automatically creating Makefiles
local/avahi 0.6.25-3
A multicast/unicast DNS-SD framework
local/b43-firmware 4.150.10.5-1
Firmware for Broadcom B43 wireless networking chips
local/b43-fwcutter 012-1
firmware extractor for the bcm43xx kernel module
local/bash 4.1.002-2 (base)
The GNU Bourne Again shell
local/beanshell 2.0b4-1
Small, free, embeddable, source level Java interpreter with object based
scripting language features written in Java
local/bin86 0.16.17-4 (base-devel)
A complete 8086 assembler and loader
local/binutils 2.20-3 (base)
A set of programs to assemble and manipulate binary and object files
local/bison 2.4.1-1 (base-devel)
The GNU general-purpose parser generator
local/bzip2 1.0.5-5 (base)
A high-quality data compression program
local/ca-certificates 20090814-2
Common CA certificates
local/ca-certificates-java 20090629-2
Common CA certificates (JKS keystore)
local/cabextract 1.2-2
A program to extract Microsoft cabinet (.CAB) files.
local/cairo 1.8.10-1
Cairo vector graphics library
local/cairomm 1.8.4-1
C++ bindings to Cairo vector graphics library
local/cdparanoia 10.2-2
Compact Disc Digital Audio extraction tool
local/cloog-ppl 0.15.7-1
Library that generates loops for scanning polyhedra
local/compositeproto 0.4.1-1
X11 Composite extension wire protocol
local/consolekit 0.4.1-2
A framework for defining and tracking users, login sessions, and seats
local/coreutils 8.4-1 (base)
The basic file, shell and text manipulation utilities of the GNU operating
system
local/cpio 2.10-1 (base)
A tool to copy files into or out of a cpio or tar archive
local/cracklib 2.8.13-2 (base)
Password Checking Library
local/cryptsetup 1.1.0-2 (base)
Userspace setup tool for transparent encryption of block devices using the
Linux 2.6 cryptoapi
local/curl 7.20.0-1
An URL retrival utility and library
local/cyrus-sasl-plugins 2.1.23-1
Cyrus Simple Authentication Service Layer (SASL) library
local/damageproto 1.2.0-1
X11 Damage extension wire protocol
local/dash 0.5.5.1-2 (base)
A POSIX compliant shell that aims to be as small as possible
local/db 4.8.26-1 (base)
The Berkeley DB embedded database system
local/dbus 1.2.20-1
Freedesktop.org message bus system
local/dbus-core 1.2.20-1
Freedesktop.org message bus system
local/dbus-glib 0.82-2
GLib bindings for DBUS
local/dcron 4.4-2 (base)
dillon's lightweight cron daemon
local/desktop-file-utils 0.15-1
Command line utilities for working with desktop entries
local/device-mapper 2.02.60-3 (base)
Device mapper userspace library and tools
local/dhcpcd 5.2.1-1 (base)
RFC2131 compliant DHCP client daemon
local/dialog 1.1_20100119-1 (base)
A tool to display dialog boxes from shell scripts
local/diffutils 2.9-1 (base)
Utility programs used for creating patch files
local/dmidecode 2.10-1
Desktop Management Interface table related utilities
local/dmxproto 2.3-1
X11 Distributed Multihead X extension wire protocol
local/dosfstools 3.0.9-1
DOS filesystem utilities
local/dri2proto 2.1-2
X11 DRI protocol
local/e2fsprogs 1.41.10-1 (base)
Ext2/3/4 filesystem utilities
local/ed 1.4-1 (base-devel)
A POSIX-compliant line editor
local/eggdbus 0.6-1
Experimental D-Bus bindings for GObject
local/eject 2.1.5-4
Eject is a program for ejecting removable media under software control
local/enca 1.13-1
Charset analyser and converter
local/enchant 1.5.0-3
A wrapper library for generic spell checking
local/eventlog 0.2.9-1
A new API to format and send structured log messages
local/exo 0.3.106-1 (xfce4)
Extensions to Xfce by os-cillation
local/expat 2.0.1-5
An XML Parser library written in C
local/faac 1.28-2
FAAC is an AAC audio encoder
local/faad2 2.7-1
ISO AAC audio decoder
local/fakeroot 1.14.4-2 (base-devel)
Gives a fake root environment, useful for building packages as a
non-privileged user
local/farsight2 0.0.17-1
Audio/Video conference software for Instant Messengers
local/ffmpeg 22511-1
Complete and free Internet live audio and video broadcasting solution for
Linux/Unix
local/file 5.04-2 (base)
File type identification utility
local/filesystem 2010.02-4 (base)
Base filesystem
local/findutils 4.4.2-1 (base)
GNU utilities to locate files
local/fixesproto 4.1.1-1
X11 Fixes extension wire protocol
local/flac 1.2.1-2
Free Lossless Audio Codec
local/flashplugin 10.0.45.2-1
Adobe Flash Player
local/flex 2.5.35-3 (base-devel)
A tool for generating text-scanning programs
local/fluidsynth 1.1.1-2
A real-time software synthesizer based on the SoundFont 2 specifications
local/fontcacheproto 0.1.3-1
X11 font cache extension wire protocol
local/fontconfig 2.8.0-1
A library for configuring and customizing font access
local/fontsproto 2.1.0-1
X11 font extension wire protocol
local/freeglut 2.6.0-1
Provides functionality for small OpenGL programs
local/freetype2 2.3.12-1
TrueType font rendering library
local/fribidi 0.19.2-1
A Free Implementation of the Unicode Bidirectional Algorithm
local/frozen-bubble 2.2.0-2
A game in which you throw colorful bubbles and build groups to destroy the
bubbles
local/fuse 2.8.3-1
A library that makes it possible to implement a filesystem in a userspace
program.
local/gamin 0.1.10-1
Gamin is a file and directory monitoring system defined to be a subset of
the FAM (File Alteration Monitor) system.
local/gawk 3.1.7-1 (base)
Gnu version of awk
local/gcc 4.4.3-1 (base-devel)
The GNU Compiler Collection
local/gcc-libs 4.4.3-1 (base)
Runtime libraries shipped by GCC for C and C++ languages
local/gconf 2.28.0-1
A configuration database system
local/gdbm 1.8.3-6 (base)
GNU database library
local/gdk-pixbuf 0.22.0-7
Image loading and manipulation library
local/gen-init-cpio 2.6.32-1 (base)
Program to compress initramfs images
local/gettext 0.17-3 (base)
GNU internationalization library
local/ghostscript 8.71-2
An interpreter for the PostScript language
local/giflib 4.1.6-3
A library for reading and writing gif images
local/git 1.7.0.2-1
the fast distributed version control system
local/gksu 2.0.2-2
A graphical frontend for su
local/glib 1.2.10-8
Common C routines used by Gtk+ and other libs
local/glib2 2.22.4-1
Common C routines used by GTK+ 2.4 and other libs
local/glibc 2.11.1-1 (base)
GNU C Library
local/glibmm 2.22.1-1
Glib-- (glibmm) is a C++ interface for glib
local/gmp 4.3.2-1
A free library for arbitrary precision arithmetic
local/gnome-icon-theme 2.28.0-1 (gnome)
Default icon theme for GNOME2
local/gnome-keyring 2.28.2-1
GNOME Password Management daemon
local/gnutls 2.8.5-1
A library which provides a secure layer over a reliable transport layer
local/google-chrome-dev 5.0.342.3-1
Google Chrome Developer preview channel for Linux
local/gparted 0.5.2-1
A Partition Magic clone, frontend to GNU Parted
local/gpm 1.20.6-5
A mouse server for the console and xterm
local/gqview 2.0.4-3
An image browser and viewer
local/grep 2.5.4-3 (base)
A string search utility
local/groff 1.20.1-4
GNU troff text-formatting system
local/grub 0.97-16 (base)
A GNU multiboot boot loader
local/gsfonts 8.11-5
Ghostscript standard Type1 fonts
local/gstreamer0.10 0.10.28-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.28-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.28-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-python 0.10.18-1
Python bindings for GStreamer 0.10
local/gtk 1.2.10-10
The GTK+ toolkit
local/gtk-aurora-engine 1.5.1-1
gtk-engine: latest member of the clearlooks family
local/gtk-xfce-engine 2.6.0-1 (xfce4)
A port of Xfce engine to GTK+-2.0
local/gtk2 2.18.7-1
The GTK+ Toolkit (v2)
local/gtkmm 2.18.2-1
C++ bindings for gtk2
local/gtkspell 2.0.16-1
GtkSpell provides word-processor-style highlighting and replacement of
misspelled words in a GtkTextView widget
local/gzip 1.4-1 (base)
GNU compression utility
local/hal 0.5.14-2
Hardware Abstraction Layer
local/hal-info 0.20091130-1
Hardware Abstraction Layer information files
local/hdparm 9.27-2 (base)
A shell utility for manipulating Linux IDE drive/driver parameters
local/heimdal 1.3.1-3
Implementation of Kerberos V5 libraries
local/hicolor-icon-theme 0.11-1
Freedesktop.org Hicolor icon theme
local/hsqldb-java 1.8.1.1-1
HSQLDB Java libraries
local/htop 0.8.3-1
Interactive process viewer
local/hunspell 1.2.8-2
Spell checker and morphological analyzer library and program
local/hyphen 2.4-1
library for high quality hyphenation and justification
local/icon-naming-utils 0.8.90-1
Maps the new names of icons for Tango to the legacy names used by the GNOME
and KDE desktops.
local/icu 4.2.1-1
International Components for Unicode library
local/ilmbase 1.0.1-1
IlmThread is a thread abstraction library for use with OpenEXR
local/imagemagick 6.6.0.0-1
An image viewing/manipulation program
local/imlib2 1.4.2-6
Library that does image file loading and saving as well as rendering,
manipulation, arbitrary polygon support
local/initscripts 2010.01-1 (base)
System initialization/bootup scripts
local/inputproto 2.0-1
X11 Input extension wire protocol
local/intel-dri 7.7-1
Mesa DRI drivers for Intel
local/iproute2 2.6.31-1
IP Routing Utilities
local/iptables 1.4.7-1
A Linux kernel packet control tool
local/iputils 20100214-2 (base)
IP Configuration Utilities (and Ping)
local/iso-codes 3.14-1
Lists of the country, language, and currency names
local/jack 0.116.2-1
A low-latency audio server
local/jasper 1.900.1-5
A software-based implementation of the codec specified in the emerging
JPEG-2000 Part-1 standard
local/jfsutils 1.1.14-1 (base)
JFS filesystem utilities
local/json-glib 0.10.0-1
JSON library built on GLib
local/kbd 1.15.1-1 (base)
Keytable files and keyboard utilities
local/kbproto 1.0.4-1
X11 XKB extension wire protocol
local/kernel26 2.6.32.10-1 (base)
The Linux Kernel and modules
local/kernel26-firmware 2.6.32.10-1 (base)
The included firmware files of the Linux Kernel
local/kernel26-headers 2.6.32.10-1
Header files and scripts for building modules for kernel26
local/ladspa 1.13-2
Linux Audio Developer's Simple Plugin API (LADSPA)
local/lame 3.98.3-1
An MP3 encoder and graphical frame analyzer
local/lcms 1.18-3
Lightweight color management development library/engine
local/less 436-1 (base)
A terminal based program for viewing text files
local/libarchive 2.8.3-1
library that can create and read several streaming archive formats
local/libass 0.9.9-1
A portable library for SSA/ASS subtitles rendering
local/libcap 2.19-1
POSIX 1003.1e capabilities
local/libcddb 1.3.2-1
Library that implements the different protocols (CDDBP, HTTP, SMTP) to
access data on a CDDB server (e.g. http://freedb.org).
local/libcdio 0.82-1
GNU Compact Disc Input and Control Library
local/libcroco 0.6.2-1
GNOME CSS2 parsing and manipulation toolkit
local/libcups 1.4.2-3
The CUPS Printing System - client libraries and headers
local/libdaemon 0.14-1
A lightweight C library which eases the writing of UNIX daemons
local/libdatrie 0.2.3-1
Libdatrie is an implementation of double-array structure for representing
trie, as proposed by Junichi Aoe.
local/libdca 0.0.5-2
Free library for decoding DTS Coherent Acoustics streams
local/libdmx 1.1.0-1
X11 Distributed Multihead extension library
local/libdrm 2.4.18-2
Userspace interface to kernel DRM services
local/libdvbpsi 0.1.6-3
MPEG TS and DVB PSI tables library (needed by vlc for streaming)
local/libdvdnav 4.1.3-2
The library for xine-dvdnav plugin.
local/libdvdread 4.1.3-1
libdvdread provides a simple foundation for reading DVD video disks
local/libebml 0.7.8-2
Extensible Binary Meta Language library
local/libevent 1.4.13-1
An event notification library
local/libexif 0.6.19-1
A library to parse an EXIF file and read the data from those tags
local/libfetch 2.30-1 (base)
URL based download library
local/libfontenc 1.0.5-1
X11 font encoding library
local/libgcrypt 1.4.5-1 (base)
a general purpose crypto library based on the code used
local/libgksu 2.0.12-1
gksu authorization library
local/libgl 7.7-1
Mesa 3-D graphics library and DRI software rasterizer
local/libglade 2.6.4-1
Allows you to load glade interface files in a program at runtime
local/libgpg-error 1.7-2 (base)
Support library for libgcrypt
local/libgraphite 2.3.1-1
SILGraphite - a "smart font" rendering engine - the libs and headers
local/libgsf 1.14.16-1
The GNOME Structured File Library is a utility library for reading and
writing structured file formats
local/libgssglue 0.1-2
exports a gssapi interface which calls other random gssapi libraries
local/libgtop 2.28.0-1
A library that read information about processes and the running system
local/libice 1.0.6-1
X11 Inter-Client Exchange library
local/libid3tag 0.15.1b-4
library for id3 tagging
local/libidl2 0.8.13-1
A front-end for CORBA 2.2 IDL and Netscape's XPIDL
local/libidn 1.16-1
Implementation of the Stringprep, Punycode and IDNA specifications
local/libjpeg 8.0.1-1
Library of JPEG support functions
local/libjpeg6 6b-9
Library of JPEG support functions
local/libldap 2.4.21-1
Lightweight Directory Access Protocol (LDAP) client libraries
local/libmad 0.15.1b-4
A high-quality MPEG audio decoder
local/libmatroska 0.8.1-2
Matroska library
local/libmikmod 3.1.12-3
A portable sound library
local/libmng 1.0.10-3
A collection of routines used to create and manipulate MNG format graphics
files
local/libmodplug 0.8.7-1
A MOD playing library
local/libmp4v2 1.9.1-1
MPEG-4 library
local/libmpcdec 1.2.6-2
Musepack decoding library
local/libmpeg2 0.5.1-1
libmpeg2 is a library for decoding MPEG-1 and MPEG-2 video streams.
local/libmspack 0.0.20060920alpha-1
local/libmtp 1.0.2-1
library implementation of the Media Transfer Protocol
local/libmysqlclient 5.1.45-1
MySQL client libraries
local/libnice 0.0.11-1
An implementation of the IETF's draft ICE (for p2p UDP data streams)
local/libnl 1.1-1
Library for applications dealing with netlink sockets
local/libnotify 0.4.5-1.1
Desktop notification library
local/libogg 1.1.4-1
Ogg bitstream and framing library
local/liboil 0.3.17-1
Library of simple functions that are optimized for various CPUs.
local/libpcap 1.0.0-1 (base)
A system-independent interface for user-level packet capture
local/libpciaccess 0.10.9-1
X11 PCI access library
local/libpng 1.4.1-1
A collection of routines used to create PNG format graphics files
local/libpng12 1.2.40-1
A collection of routines used to create PNG format graphics files
local/libproxy 0.2.3-1
A library that provides automatic proxy configuration management
local/libpurple 2.6.6-1
IM library extracted from Pidgin
local/librpcsecgss 0.19-2
Library for RPCSECGSS support
local/librsvg 2.26.0-2
SAX-based renderer for SVG files into a GdkPixbuf
local/libsasl 2.1.23-2
Cyrus Simple Authentication Service Layer (SASL) library
local/libsexy 0.1.11-2
Doing naughty things to good widgets.
local/libshout 2.2.2-3
Library for accessing a shoutcast/icecast server
local/libsigc++2.0 2.2.4.2-1
Libsigc++ implements a full callback system for use in widget libraries - V2
local/libsm 1.1.1-1
X11 Session Management library
local/libsndfile 1.0.21-1
A C library for reading and writing files containing sampled sound
local/libtasn1 2.4-1
The ASN.1 library used in GNUTLS
local/libthai 0.1.14-1
Thai language support routines
local/libtheora 1.1.1-1
An open video codec developed by the Xiph.org
local/libtiff 3.9.2-2
Library for manipulation of TIFF images
local/libtirpc 0.2.1-1
Transport Independent RPC library (SunRPC replacement)
local/libtool 2.2.6b-2 (base-devel)
A generic library support script
local/libusb 0.1.12-4 (base)
Library to enable user space application programs to communicate with USB
devices
local/libv4l 0.6.4-1
Userspace library for Video 4 Linux (1 and 2)
local/libvdpau 0.4-1
Nvidia VDPAU library
local/libvisual 0.4.0-2
Abstraction library that comes between applications and audio visualisation
plugins
local/libvorbis 1.2.3-1
Vorbis codec library
local/libwmf 0.2.8.4-7
A library for reading vector images in Microsoft's native Windows Metafile
Format (WMF).
local/libwnck 2.28.0-1
Window Navigator Construction Kit
local/libwpd 0.8.14-1
library for importing WordPerfect (tm) documents
local/libx11 1.3.3-1
X11 client-side library
local/libx86 1.1-2
Provides an lrmi interface that works on x86, am64 and alpha
local/libxau 1.0.5-1
X11 authorisation library
local/libxaw 1.0.7-1
X11 Athena Widget library
local/libxcb 1.5-1
X11 client-side library
local/libxcomposite 0.4.1-1
X11 Composite extension library
local/libxcursor 1.1.10-1
X cursor management library
local/libxdamage 1.1.2-1
X11 damaged region extension library
local/libxdmcp 1.0.3-1
X11 Display Manager Control Protocol library
local/libxext 1.1.1-1
X11 miscellaneous extensions library
local/libxfce4menu 4.6.1-1 (xfce4)
a freedesktop.org compliant menu implementation for Xfce
local/libxfce4util 4.6.1-1 (xfce4)
Basic utility non-GUI functions for Xfce
local/libxfcegui4 4.6.3-1 (xfce4)
Various gtk widgets for Xfce
local/libxfixes 4.0.4-1
X11 miscellaneous 'fixes' extension library
local/libxfont 1.4.1-1
X11 font rasterisation library
local/libxfontcache 1.0.5-1
X11 font cache library
local/libxft 2.1.14-1
FreeType-based font drawing library for X
local/libxi 1.3-2
X11 Input extension library
local/libxinerama 1.1-1
X11 Xinerama extension library
local/libxkbfile 1.0.6-1
X11 keyboard file manipulation library
local/libxklavier 4.0-1
High-level API for X Keyboard Extension
local/libxml2 2.7.6-2
XML parsing library, version 2
local/libxmu 1.0.5-1
X11 miscellaneous micro-utility library
local/libxpm 3.5.8-1
X11 pixmap library
local/libxrandr 1.3.0-1
X11 RandR extension library
local/libxrender 0.9.5-1
X Rendering Extension client library
local/libxres 1.0.4-1
X11 Resource extension library
local/libxslt 1.1.26-1
XML stylesheet transformation library
local/libxss 1.2.0-1
X11 Screen Saver extension library
local/libxt 1.0.7-1
X11 toolkit intrinsics library
local/libxtst 1.1.0-1
X11 Testing -- Resource extension library
local/libxv 1.0.5-1
X11 Video extension library
local/libxvmc 1.0.5-1
X11 Video Motion Compensation extension library
local/libxxf86dga 1.1.1-1
X11 Direct Graphics Access extension library
local/libxxf86misc 1.0.2-1
X11 XFree86 miscellaneous extension library
local/libxxf86vm 1.1.0-1
X11 XFree86 video mode extension library
local/licenses 2.5-1 (base)
The standard licenses distribution package
local/links 2.2-3
A text WWW browser, similar to Lynx
local/linux-api-headers 2.6.32.5-2 (base)
Kernel headers sanitized for use in userspace
local/linux-atm 2.5.0-1
Drivers and tools to support ATM networking under Linux.
local/logrotate 3.7.8-1 (base)
Rotates system logs automatically
local/lpsolve 5.5.0.15-1
a Mixed Integer Linear Programming (MILP) solver
local/lua 5.1.4-4
A powerful light-weight programming language designed for extending
applications.
local/lucene 2.9.2-1
A high-performance, full-featured text search engine library written
entirely in Java
local/lvm2 2.02.60-3 (base)
Logical Volume Manager 2 utilities
local/lzo2 2.03-1 (base)
Portable lossless data compression library written in ANSI C
local/m4 1.4.14-1 (base-devel)
m4 macro processor
local/mach64-dri 7.7-1
Mesa DRI drivers for ATI Mach64
local/madwifi 0.9.4.4100-2
Madwifi drivers for Atheros wireless chipsets. For stock arch 2.6 kernel
local/madwifi-utils 0.9.4.4096-1
Userspace tools of madwifi drivers for Atheros wireless chipsets.
local/mailx 8.1.1-7 (base)
A commandline utility for sending email
local/make 3.81-4 (base-devel)
GNU make utility to maintain groups of programs
local/man-db 2.5.7-1 (base)
A utility for reading man pages
local/man-pages 3.24-1 (base)
Linux man pages
local/mcpp 2.7.2-2
Matsui's CPP implementation precisely conformed to standards
local/mdadm 3.1.1-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as
Software RAID
local/meliae-svg-icon-theme 1.2-1
Here you are version n. 1.1 of the new Meliae Icon Theme (all icons are in
SVG format).
local/mesa 7.7-1
Mesa 3-D graphics libraries and include files
local/mga-dri 7.7-1
Mesa DRI drivers for Matrox
local/mkinitcpio 0.6.3-1 (base)
Modular initramfs image creation utility
local/mkinitcpio-busybox 1.15.3-5
base initramfs tools
local/mlocate 0.22.3-1
Faster merging drop-in for slocate
local/mobile-broadband-provider-info 0.20100301-1
Network Management daemon
local/module-init-tools 3.11.1-2 (base)
utilities needed by Linux systems for managing loadable kernel modules
local/mousepad 0.2.16-2 (xfce4)
Simple Text Editor for Xfce4 (based on Gedit)
local/mozilla-common 1.4-1
Common Initialization Profile for Mozilla.org products
local/mpfr 2.4.2-1
multiple-precision floating-point library
local/ms-sys 2.1.4-2
A tool to write Win9x/2k/XP/2k3/Vista/7/2k8 master boot records (mbr) under
linux - RTM!
local/mtools 4.0.13-1
A collection of utilities to access MS-DOS disks
local/nano 2.2.3-1 (base)
Pico editor clone with enhancements
local/ncurses 5.7-2 (base)
System V Release 4.0 curses emulation library
local/ndiswrapper 1.56-1
Module for NDIS (Windows Network Drivers) drivers supplied by vendors. For
stock arch 2.6 kernel.
local/ndiswrapper-utils 1.56-1
Binaries for ndiswrapper module
local/neon 0.28.6-2
HTTP and WebDAV client library with a C interface
local/net-tools 1.60-14 (base)
Configuration tools for Linux networking
local/network-manager-applet 0.8-2
GNOME frontends to NetWorkmanager
local/networkmanager 0.8-1
Network Management daemon
local/nfs-utils 1.2.2-1
Support programs for Network File Systems
local/nfsidmap 0.23-3
Library to help mapping IDs, mainly for NFSv4
local/notification-daemon 0.4.0-4 (gnome)
Notification daemon for the desktop notifications framework
local/nspr 4.8.3-1
Netscape Portable Runtime
local/nss 3.12.4-2
Mozilla Network Security Services
local/ntfs-3g 2010.1.16-1
Stable read and write NTFS driver
local/ntfsprogs 2.0.0-4
NTFS filesystem utilities
local/opencore-amr 0.1.2-1
Open source implementation of the Adaptive Multi Rate (AMR) speech codec
local/openexr 1.6.1-1
openexr library for EXR images
local/openjdk6 6.b17_1.7.1-1
Free Java environment based on OpenJDK 6.0 with IcedTea6 replacing binary
plugs.
local/openntpd 3.9p1-10
Free, easy to use implementation of the Network Time Protocol.
local/openoffice-base 3.2.0-1
OpenOffice.org - a free multiplatform and multilingual office suite -
testing branch leeding to next stable release
local/openssh 5.3p1-4
A Secure SHell server/client
local/openssl 0.9.8m-2
The Open Source toolkit for Secure Sockets Layer and Transport Layer
Security
local/ophcrack 3.3.1-4
A free Windows password cracker based on rainbow tables
local/orage 4.6.1-1 (xfce4)
A simple calendar application with reminders for Xfce
local/orbit2 2.14.17-1
Thin/fast CORBA ORB
local/pacman 3.3.3-1 (base)
A library-based package manager with dependency support
local/pacman-color 3.3.3-1
Command-line frontend for libalpm aka pacman with color patch
local/pacman-mirrorlist 20100131-1 (base)
Arch Linux mirror list for use by pacman
local/pam 1.1.1-1 (base)
PAM (Pluggable Authentication Modules) library
local/pango 1.26.2-1
A library for layout and rendering of text
local/pangomm 2.26.0-1
C++ bindings for pango
local/parted 2.2-1
A program for creating, destroying, resizing, checking and copying
partitions
local/patch 2.6.1-1 (base-devel)
A utility to apply patch files to original sources
local/pciutils 3.1.7-1 (base)
PCI bus configuration space access library and tools
local/pcmciautils 016-1 (base)
Utilities for inserting and removing PCMCIA cards
local/pcre 8.01-1 (base)
A library that implements Perl 5-style regular expressions
local/perl 5.10.1-5 (base)
Practical Extraction and Report Language
local/perl-error 0.17016-1
Perl/CPAN Error module - Error/exception handling in an OO-ish way
local/perl-locale-gettext 1.05-5
Permits access from Perl to the gettext() family of functions.
local/perl-xml-simple 2.18-2
Simple XML parser for perl
local/perlxml 2.36-2
XML::Parser - an XML parser module for perl
local/pidgin 2.6.6-1
Multi-protocol instant messaging client
local/pidgin-facebookchat 1.64-1
Facebook chat plugin for Pidgin and libpurple messengers.
local/pixman 0.16.6-1
Pixman library
local/pkgconfig 0.23-1 (base-devel)
A system for managing library compile/link flags
local/pkgtools 17-1
A collection of scripts for Arch Linux packages
local/pm-utils 1.2.6.1-4
Utilities and scripts for suspend and hibernate power management
local/polkit 0.96-2
Application development toolkit for controlling system-wide privileges
local/polkit-gnome 0.96-3
PolicyKit integration for the GNOME desktop
local/popt 1.15-1 (base)
A commandline option parser
local/postgresql-libs 8.4.2-4
Libraries for use with PostgreSQL
local/ppl 0.10.2-2
A modern library for convex polyhedra and other numerical abstractions.
local/ppp 2.4.5-1 (base)
A daemon which implements the PPP protocol for dial-up networking
local/preload 0.6.4-2
Makes applications run faster by prefetching binaries and shared objects
local/procinfo 19-3 (base)
Displays useful information from /proc
local/procps 3.2.8-1 (base)
Utilities for monitoring your system and processes on your system
local/psmisc 22.10-1 (base)
Miscellaneous procfs tools
local/psutils 1.17-2
A set of postscript utilities
local/pycairo 1.8.8-1
Python bindings for the cairo graphics library
local/pygobject 2.20.0-1
Python bindings for GObject
local/pygtk 2.16.0-2
Python bindings for the GTK widget set
local/python 2.6.5-1
A high-level scripting language
local/python-mpd 0.2.1-2
Python MPD client library
local/qt 4.6.2-1
A cross-platform application and UI framework
local/qwt 5.2.0-2
Qt Widgets for Technical Applications
local/r128-dri 7.7-1
Mesa DRI drivers for ATI Rage128
local/randrproto 1.3.1-1
X11 RandR extension wire protocol
local/raptor 1.4.21-1
A C library that parses RDF/XML/N-Triples into RDF triples
local/rasqal 0.9.19-1
a free C library that handles Resource Description Framework (RDF) query
syntaxes, query construction and query execution returning result bindings
local/readline 6.1.002-1
GNU readline library
local/recode 3.6-3
Converts files between various character sets and usages
local/recordproto 1.14-1
X11 Record extension wire protocol
local/redland 1.0.10-2
Library that provides a high-level interface to RDF data
local/reiserfsprogs 3.6.21-2 (base)
Reiserfs utilities
local/renderproto 0.11-1
X11 Render extension wire protocol
local/rp-pppoe 3.10-4 (base)
Roaring Penguin's Point-to-Point Protocol over Ethernet client
local/rpcbind 0.2.0-1
portmap replacement which supports RPC over various protocols
local/run-parts 3.2.2-1
run scripts or programs in a directory
local/savage-dri 7.7-1
Mesa DRI drivers for S3 Sraphics/VIA Savage
local/saxon 9.2.0.6-1
XSLT 2.0 / XPath 2.0 / XQuery 1.0 processor for Java - the open source Home
Edition
local/scrnsaverproto 1.2.0-1
X11 Screen Saver extension wire protocol
local/sdl 1.2.14-1
A library for portable low-level access to a video framebuffer, audio
output, mouse, and keyboard
local/sdl_gfx 2.0.20-1
SDL Graphic Primitives
local/sdl_image 1.2.10-2
A simple library to load images of various formats as SDL surfaces
local/sdl_mixer 1.2.11-2
A simple multi-channel audio mixer
local/sdl_net 1.2.7-3
A small sample cross-platform networking library
local/sdl_pango 0.1.2-2
Pango SDL binding
local/sdl_perl 2.2.6-3
A Perl wrapper for SDL
local/sdl_ttf 2.0.9-2
A library that allows you to use TrueType fonts in your SDL applications
local/sdparm 1.04-1 (base)
An utility similar to hdparm but for SCSI devices
local/sed 4.2.1-1 (base)
GNU stream editor
local/shadow 4.1.4.2-2 (base)
Shadow password file utilities
local/shared-mime-info 0.71-1
Freedesktop.org Shared MIME Info
local/silc-toolkit 1.1.10-1
Toolkit for Secure Internet Live Conferencing
local/sis-dri 7.7-1
Mesa DRI drivers for SiS
local/smbclient 3.5.1-1
Tools to access a server's filespace and printers via SMB
local/smpeg 0.4.4-5
SDL MPEG Player Library
local/sonata 1.6.2.1-1
Elegant GTK+ music client for MPD
local/speex 1.2rc1-1.1
A free codec for free speech
local/sqlite3 3.6.22-1
A C library that implements an SQL database engine
local/squeeze 0.2.3-2 (xfce4)
Squeeze is a modern and advanced archive manager for the Xfce Desktop
Environment.
local/startup-notification 0.10-1
Monitor and display application startup
local/sudo 1.7.2p5-1
Give certain users the ability to run some commands as root
local/sysfsutils 2.1.0-5 (base)
System Utilities Based on Sysfs
local/syslog-ng 3.0.4-3 (base)
Next-generation syslogd with advanced networking and filtering capabilities
local/sysvinit 2.86-5 (base)
Linux System V Init
local/taglib 1.6.1-1
library for reading and editing the meta-data of several popular audio
formats.
local/talloc 2.0.1-1
talloc is a hierarchical pool based memory allocator with destructors
local/tar 1.23-1 (base)
Utility used to store, backup, and transport files
local/tcp_wrappers 7.6-11 (base)
Monitors and Controls incoming TCP connections
local/tdb 1.2.1-1
A Trivia Database similar to GDBM but allows simultaneous commits
local/tdfx-dri 7.7-1
Mesa DRI drivers for 3dfx
local/terminal 0.4.4-1 (xfce4)
A modern terminal emulator primarly for the Xfce desktop environment
local/texinfo 4.13a-3 (base)
Utilities to work with and produce manuals, ASCII text, and on-line
documentation from a single source file
local/thunar 1.0.1-5 (xfce4)
new modern file manager for Xfce
local/ttf-dejavu 2.30-2
Font family based on the Bitstream Vera Fonts with a wider range of
characters
local/ttf-freefont 20090104-2
A set of free high-quality TrueType fonts covering the UCS character set
local/ttf-ms-fonts 2.0-2
Core TTF Fonts from Microsoft
local/ttf-vista-fonts 1-3
Microsoft Vista True Type Fonts
local/tzdata 2010e-1
Sources for time zone and daylight saving time data
local/udev 151-3 (base)
The userspace dev tools (udev)
local/unixodbc 2.2.14-2
ODBC is an open specification for providing application developers with a
predictable API with which to access Data Sources
local/unzip 6.0-5
Unpacks .zip archives such as those made by PKZIP
local/usbutils 0.86-2 (base)
USB Device Utilities
local/util-linux-ng 2.17.1-1 (base)
Miscellaneous system utilities for Linux
local/vbetool 1.1-1
vbetool uses lrmi in order to run code from the video BIOS
local/vi 050325-3 (base)
The original ex/vi text editor.
local/videoproto 2.3.0-1
X11 Video extension wire protocol
local/vigra 1.6.0-2
Computer vision library
local/vim 7.2.385-1
Vi Improved, a highly configurable, improved version of the vi text editor
local/virtualbox_bin 3.1.4-3
Powerful x86 virtualization (Personal Use Binaries Edition).
local/vlc 1.0.5-5
A multi-platform MPEG, VCD/DVD, and DivX player
local/vte 0.22.5-1
Virtual Terminal Emulator library
local/wget 1.12-1 (base)
A network utility to retrieve files from the Web
local/which 2.20-2 (base)
A utility to show the full path of commands
local/wine 1.1.41-1
A compatibility layer for running Windows programs
local/wireless_tools 29-3
Wireless Tools
local/wpa_supplicant 0.6.10-1 (base)
A utility providing key negotiation for WPA wireless networks
local/x264 20100312-1
free library for encoding H264/AVC video streams
local/xbitmaps 1.1.0-1
X.org Bitmap files
local/xcb-proto 1.6-1
XML-XCB protocol descriptions
local/xcb-util 0.3.6-1
Utility libraries for XC Binding
local/xchat 2.8.6-5
A GTK+ based IRC client
local/xcursor-themes 1.0.2-1
X.org Cursor themes
local/xcursor-vanilla-dmz-aa 0.4-5
Vanilla DMZ AA cursor theme
local/xdg-utils 1.0.2.20100303-1
Command line tools that assist applications with a variety of desktop
integration tasks.
local/xextproto 7.1.1-1
X11 various extension wire protocol
local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
local/xf86-video-apm 1.2.2-2 (xorg-video-drivers)
X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.2-1 (xorg-video-drivers)
X.org ark video driver
local/xf86-video-ati 6.12.4-3 (xorg-video-drivers)
X.org ati video driver
local/xf86-video-chips 1.2.2-2 (xorg-video-drivers)
X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-2 (xorg-video-drivers)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.2-2 (xorg-video-drivers)
X.org dummy video driver
local/xf86-video-fbdev 0.4.1-2 (xorg-video-drivers)
X.org framebuffer video driver
local/xf86-video-geode 2.11.6-1 (xorg-video-drivers)
X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.4-2 (xorg-video-drivers)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.3-2 (xorg-video-drivers)
X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-2 (xorg-video-drivers)
X.org Intel i740 video driver
local/xf86-video-intel 2.10.0-1 (xorg-video-drivers)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.8.2-2 (xorg-video-drivers)
X.org mach64 video driver
local/xf86-video-mga 1.4.11-2 (xorg-video-drivers)
X.org mga video driver
local/xf86-video-neomagic 1.2.4-3 (xorg-video-drivers)
X.org neomagic video driver
local/xf86-video-nv 2.1.17-1 (xorg-video-drivers)
X.org nv video driver
local/xf86-video-r128 6.8.1-2 (xorg-video-drivers)
X.org ati Rage128 video driver
local/xf86-video-radeonhd 1.3.0-1 (xorg-video-drivers)
Experimental Radeon HD video driver for r500 and r600 ATI cards
local/xf86-video-rendition 4.2.3-1 (xorg-video-drivers)
X.org Rendition video driver
local/xf86-video-s3 0.6.3-1 (xorg-video-drivers)
X.org S3 video driver
local/xf86-video-s3virge 1.10.3-1 (xorg-video-drivers)
X.org S3 Virge video driver
local/xf86-video-savage 2.3.1-2 (xorg-video-drivers)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.3-2 (xorg-video-drivers)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.2-3 (xorg-video-drivers)
X.org SiS video driver
local/xf86-video-sisusb 0.9.3-1 (xorg-video-drivers)
X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-2 (xorg-video-drivers)
X.org tdfx video driver
local/xf86-video-trident 1.3.3-3 (xorg-video-drivers)
X.org Trident video driver
local/xf86-video-tseng 1.2.3-1 (xorg-video-drivers)
X.org tseng video driver
local/xf86-video-v4l 0.2.0-4 (xorg-video-drivers)
X.org v4l video driver
local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
X.org vesa video driver
local/xf86-video-vmware 10.16.9-1 (xorg-video-drivers)
X.org vmware video driver
local/xf86-video-voodoo 1.2.3-1 (xorg-video-drivers)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86dgaproto 2.1-1
X11 Direct Graphics Access extension wire protocol
local/xf86miscproto 0.9.3-1
X11 XFree86-Miscellaneous extension wire protocol
local/xf86vidmodeproto 2.3-1
X11 Video Mode extension wire protocol
local/xfce-utils 4.6.1-2 (xfce4)
Utilities for Xfce
local/xfce4-appfinder 4.6.1-2 (xfce4)
Xfce application finder
local/xfce4-battery-plugin 0.5.1-2 (xfce4-goodies)
A battery monitor plugin for the Xfce panel
local/xfce4-diskperf-plugin 2.1.0-5 (xfce4-goodies)
Plugin for the Xfce4 panel displaying instant disk/partition performance
local/xfce4-icon-theme 4.4.3-1 (xfce4)
A set of icon themes for the Xfce window manager
local/xfce4-mixer 4.6.1-1 (xfce4)
The volume control plugin for the Xfce panel
local/xfce4-panel 4.6.3-1 (xfce4)
Panel for the Xfce desktop environment
local/xfce4-session 4.6.1-1 (xfce4)
A session manager for Xfce
local/xfce4-settings 4.6.4-1 (xfce4)
Settings manager for xfce
local/xfconf 4.6.1-3 (xfce4)
xfconf.. thingie
local/xfdesktop 4.6.1-1 (xfce4)
A desktop manager for Xfce
local/xfprint 4.6.1-2 (xfce4)
A print dialog and a printer manager for Xfce
local/xfsprogs 3.1.1-1 (base)
XFS filesystem utilities
local/xfwm4 4.6.1-1 (xfce4)
Xfce window manager, compatible with Gnome, Gnome2, KDE2, and KDE3
local/xfwm4-themes 4.6.0-1 (xfce4)
A set of additionnal themes for the Xfce window manager
local/xineramaproto 1.2-1
X11 Xinerama extension wire protocol
local/xkeyboard-config 1.8-1
X keyboard configuration files
local/xorg-apps 7.5-3
Various X.Org applications
local/xorg-docs 1.5-1 (xorg)
X.org documentations
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-100dpi 1.0.1-3 (xorg)
X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-3 (xorg)
X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.1-1
X.org misc fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.5.902-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.6-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.2.0-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-2
X.org keyboard utilities
local/xproto 7.0.16-1
X11 core wire protocol and auxiliary headers
local/xsel 1.2.0-1
XSel is a command-line program for getting and setting the contents of the X
selection
local/xterm 255-1 (xorg)
X Terminal Emulator
local/xvidcore 1.2.2-1
XviD is an open source MPEG-4 video codec
local/xz-utils 4.999.9beta-2
utils for managing LZMA and XZ compressed files
local/yaourt-git 20100319-1
A pacman wrapper with extended features and AUR support
local/zd1211-firmware 1.4-3
Firmware for the in-kernel26 zd1211rw wireless driver
local/zlib 1.2.4-1
Compression library implementing the deflate compression method found in
gzip and PKZIP
local/zvbi 0.2.33-2
VBI capture and decoding library
Output of lsmod
Module Size Used by
nls_cp437 4513 1
vfat 8348 1
fat 43888 1 vfat
ipv6 237596 22
snd_hda_codec_analog 51443 1
i915 267595 2
drm_kms_helper 21971 1 i915
i2c_i801 7122 0
drm 126556 3 i915,drm_kms_helper
i2c_algo_bit 4219 1 i915
ndiswrapper 172796 0
usbhid 33579 0
hid 61085 1 usbhid
i2c_core 15369 4 i915,i2c_i801,drm,i2c_algo_bit
iTCO_wdt 7577 0
ppdev 4882 0
lp 6616 0
video 14871 1 i915
e1000e 112803 0
ide_pci_generic 2008 0
button 3638 1 i915
iTCO_vendor_support 1453 1 iTCO_wdt
output 1404 1 video
ide_core 76951 1 ide_pci_generic
intel_agp 23225 1
agpgart 23331 2 drm,intel_agp
processor 26526 2
dcdbas 4440 0
thermal 9326 0
sg 21079 0
psmouse 56309 0
serio_raw 3620 0
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 18985 0
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_codec 56728 2 snd_hda_codec_analog,snd_hda_intel
parport_pc 27680 1
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57351 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
parport 26575 3 ppdev,lp,parport_pc
snd_timer 16117 2 snd_seq,snd_pcm
pcspkr 1347 0
evdev 6970 8
snd 43847 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
loop 11399 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext2 56463 1
mbcache 4278 1 ext2
sr_mod 13161 0
cdrom 31625 1 sr_mod
sd_mod 24101 3
usb_storage 34006 2
pata_acpi 2264 0
ata_generic 2235 0
ata_piix 17725 0
uhci_hcd 19156 0
libata 135579 3 pata_acpi,ata_generic,ata_piix
scsi_mod 78933 5 sg,sr_mod,sd_mod,usb_storage,libata
ehci_hcd 31594 0
usbcore 118921 6 ndiswrapper,usbhid,usb_storage,uhci_hcd,ehci_hcd

Very strange problem. Missing characters in QT applications

Hello all.
I'm trying to deal with a very strange issue since some time, that is driving me crazy, because I have no clue where the problem may lay:
In my Archlinux system, some, and only some QT applications (for example Skype, or Qtconfig) don't display properly certain characters in the unicode set (for example "ń" or "ł") when I use certain fonts (for example Terminus, Clean or Verdana), and those applications substitute those characters with the corresponding ones from the Bitstream Vera Sans font type.
So, when I write, say, the Polish word "Toruń", the four first letters (T, o, r and u) are rendereed in the desired font type (let's say Terminus). However, the last letter (ń) is rendered in Bitstream Vera Sans, thus making the writing appear really ugly and uneven.
However, this doesn't happen in Opera (the browser), which is a QT application, but where I get the whole unicode character set displayed properly in the desired font type (Terminus in this example).
Also, this doesn't happen in the rest of non-QT applications I have in my system: all of them render perfectly the whole unicode set of characters in the desired font type, no matter which.
But! it's not a problem of those QT applications, because I have another partition with Ubuntu installed, and when I boot that partition I don't have this problem: all applications, including Skype and Qtconfig, display correctly all characters in the whole unicode set, no matter which font type I'm using.
This is totally bewildering me.
Any clue?
Thank you.

The problem is not only in qt applications. I run openbox and this is the output I get when using the command-line script pdfmerge to merge pdf files:
GPL Ghostscript 8.71: Missing glyph CID=48, glyph=0030 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=49, glyph=0031 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=31, glyph=001f in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=38, glyph=0026 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=37, glyph=0025 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=34, glyph=0022 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=54, glyph=0036 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=44, glyph=002c in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=50, glyph=0032 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=77, glyph=004d in the font Verdana . The output PDF may fail with some viewers.
There are visible errors in the pdf output. For example, bold "C" is replaced by a square box, bold "b" is replaced by a space.
It looks like there's bug in the Verdana font or perhaps in Ghostscript 8.71

Very Strange #1503 Script Timeout Error...

Similar Messages

Maybe you are looking for