Very strange and very frustrating WiFI issue with U460 Ideapad.
I have been very happy with my U460 up until this point. A very good value I thought.
Problem:
Unit running well. One day my wife complains that the wifi is dropping on her. We reset the router and it seemingly went right back to normal operation.
This continued however, not more than 10 minutes later. I took a look at it and diagnosed it as a wifi router issue. I called my isp and they reccomended I started cycling the channels used on the router to avoid any interference. So I did that.
Absoulutely no improvement. About that time I brought other machines into the mix and they would have no issue at all while the u460 would drop the connection periodically.
So I called Lenovo and they had me remove some bloatware from the computer, I forget the name of the program. They also had me reinstall the drivers for the wifi. This did nothing, but I gave it a day or two to let it work itself out.
Next thing was to flash the hard drive completely. This did nothing. In fact, this made the situation somewhat worse for some reason, but it is hard to really quantify what is "worse". They then sent a box for me to return the machine.
Return 1: From all I can tell they just flashed the hard drive again and put it back in the box. The notes said they saw this issue I saw.
I almost immediately call them up again and they send me a RMR number to send the u460 back
Return 2: Replaced WIFI adaptor and flashed hard drive. Again they note on the RMR that they saw this issue.
This has had no improvement whatsoever.
Further debug steps:
I note that the closer I am to the router the longer the wifi will stay connected, but it will drop out eventually
Ethernet is totally ok. Bluetooth is OK
Seems to disconnect on other wifi access points other than my own.
I am worried to send this back again. I have a lot of consumer electronics experience as I work in support for a major technology firm. To me I have absolutely no idea what the heck is going on. I think the software is clean, and I can't even imagine what the hardware issue would be. From browsing this forum this problem is nearly completely unique except insofar as removing the bloatware which pertains to the wifi.
Any help would be appreciated before I call Lenovo again to send the machine back. The next option is just EBAY as a broken item to recoup some of the cost.
http://forum.lenovo.com/t5/IdeaPad-Y-U-B-V-and-Z-series/Y560-keeps-dropping-wifi/m-p/316715#M29893
Similar Messages
-
IPad 2 and iPad 3 WiFi issues with IOS6
I have both and iPad2 and iPad3 and since upgrading to IOS6 the WiFi connection does not work. Other devices work fine connecting to the same WiFi router. What I have found for the iPads is that name resolution is broken. My iPads get and IP address and DNS address from the router however you cannot connect to anything. Using Safari, if I browse directly to the IP address of a site it works fine.
When connecting with the internal 3G modems it works fine.
Anyone else having similar issues - very frustrating.For those interested, I stumbled across a solution here. I changed my WiFi ciphers from tkip to aes and it's working. Strange but true.
-
I cannot get decent reception on my 4s from Sprint. I understand there is a known WiFi issue with the 4s as well as antenna issues. Is this true and is it resoved in the 5 series?
I am aware that Sprint has network issues. I have learned that Apple does have reception issues with the 4s. The 5 series has more antenna area and a different protocol. I have owned at least 6 iPhones personally and over 30 as a company. The 4s is junk. Apple's attitude toward customer service is much more of a problem than Sprint's network. Apple sent me your non-answer to my questions instead of anything real. I asked about the iPhone, not about Sprint.
-
ITunes and iPhone 4 sync issues with Windows 7 64 bit
I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
4. The iPhone "iPhone" can not be synced. The required file can not be found.
5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
6. The iPhone "iPhone" can not be synced. An internal device error occured.
These errors keep appearing one after the other.
I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
I have tried changing time zones.
I have created a new user account on same laptop and still have same issues with iTunes.
Restore fails with error "Unable to read file or file is corrupt".
Yet iTunes works fine on a 32bit operating system of Windows 7.
The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
I have been trying for over a week with every piece of trouble shooting I can find to make this work.
Any help or further information would be VERY GREATLY APPRECIATED.
Thanks in AdvanceI too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
I've gotten a ton of errors, here's a sample.
iBooks couldn't be installed on my iPhone unknown error 0xE800000C
Textie couldn't be installed on my iPhone, unknown error 0xE8000013
"failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
unknown error 0xE8004006
"duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
I tried everything discussed in the following thread but it did not work.
http://discussions.apple.com/thread.jspa?threadID=2401822
Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
Just grasping at straws here.... -
Hi,
I am having major WiFi issues with my Curve 8530. Everytime I connect to my wireless router, it takes a long time to connect to BIS, and then if I try to use basically any data at all, my router drops my Curve 8530. Sometimes it stays connected, but I cannot use App World at all, and email, and web browsing is all over the place in terms of speed, sometimes it is fast, while sometimes it is slow, and most of the time it stalls while loading a page. How do I configure my router for use with BIS and have it not drop my Curve 8530 everytime I use data over WiFi? BIS works perfectly over my cellular carriers network, so BIS is activated on my device. I have tried giving my BB a static IP, but that did not solve anything. My router is a Netgear WNR2000. Also, I have the latest device software installed on my BB, and all of my apps are up-to-date.Hi,
Have you had any luck and resolving your problem?
We have a similar problem but it's with iOS devices where only one can connect at a time. We have about 10 that need to connect. All other laptops and tablets connect fine.
Power cycling the AX411 fixes it temporarly.
Darren -
Is Apple aware of the Wifi issue with the IOS8 upgrade?
Is Apple aware of the WiFi issue with the IOS8 update? If so, what are the doing about it?
Ipad, wifi stops working and I have to restart my iPad and log in again. It only stays logged into my wifi for a short while then it drops it again. I followed instructions from other threads to reset my IPad and my router...still having issues. The same thing happened the last time I updated my IOS.
-
I am facing WiFi issues with my S850 phone. It does connect to wifi network but browsing does not work. It is same for all the wifi networks. I am not able to browse internet or any other work which req net connectivity,
can you try do a factory restore then just use the phone without changing anything in settings. I am not sure if this is caused by settings or a hardware issue.
If after doing a factory reset and problem persist then bring it to the service center.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?
From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
i had to get an internet conection from a friend to download akll my apps evrytime i sync with my pc wich already had itunes all apps except statup are gone only thing left was an i tunes song i brought from itunes each time i use my apple id pass word it tells me to retry i do this 4 to 5 times and some times have no success my latest issue was my sim locking buy itself then asking me to put in a sim without a lock , i only have 1 sim i brought 2 phones and have had no issues with the other phone and when i do have the original startup apps i can not move or arange them thru itunes apps and i cannot use sim from other iphone pls help evry1 i ask wouldnt have a clue because there having there own dificulties
If you also backed up to your computer - you can restore from that backup - to retrieve the files. As far as I know- that should have no bearing on deleting them from iCloud - they should still be in that backup.
If you used iOS file sharing with your computer - and saved the files to your computer - you can retrieve them from there.
if the only place that the files were saved to was iCloud, I know of no way to get them back. -
I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market
The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
You will no longer receive security updates.<br />
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Part 2: Flat files and Business Contents: Any issues with this scenario?
I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advanceHallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike -
I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.
artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Since HTC is going to start unlocking thier phones and Verizon has no issue with that
Since HTC is going to start unlocking thier phones and Verizon has no issue with that
those who have unlocked their phones should have no issues with warranty unless they alter the OEM Rom or install a different rom
Most people want to root to get rid of all the bloatware
So we are back to why not let us remove what we want and put this to rest....
Behold, the Power of the Android Community: HTC to Unlock Future
Bootloaders
[Updated: Yes There Will Be] Verizon: There Won’t Be Any Unlocked Devices On Our Networkbudone wrote:
I think VZW has no issue (if that is actually true) is because if a phone pukes and it has been rooted, their hands are washed of providing a replacement.
You hit it right on the head, just because they do not lock down bootloaders still does not change that rooting and installing unarthorized firmware or OS violates TOS and voids warrenty which cleans Verizons hands to replace device if it gets damage while doing any of these things to device. -
I upgraded my iPad 3 to 7.0.4 and now I have wifi issues I never had before and apple customer support is no help. Does anybody know how to solve this issue?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
The requested feature DSC-Service is not found on the target machine.
Hi, I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine, While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-serv
-
Setting up a Document Mangement System Programme
I am setting up a DMS on my laptop (using Windows) and the DMS set up screen is asking for the database host and the port how do I find this. please note that I am a novice Thanks Alan Briggs
-
Things were going fine until about a month or so ago, now when I take files from older illustrator programs or other programs that ran fine with illustrator before, the colors change. This is a BIG problem for me right now! I tried the on line help t
-
How to set inputZ for control inputs ie: strobe, pfix?
RE: PXI-6551 Need to configure input control for inputZ (50/10k). ex: My app. requires strobe input and pfi 2 (input) to have 50 ohm input impedances. Default is 10k. Property node for input impedance doesn't like "STROBE or PFI 2" etc.
-
How do I restore the Photoshop Elements 13 welcome screen?
I recently opted to have Photoshop Elements launch in the Organizer. After doing so I realized that I prefer the default Welcome Screen. How do I restore the Welcome Screen?