Very strange behavior when on charge.

When on charge at night my 5s opens and plays random Utube videos from time to time. Last night as we were laying in bed just about to go to sleep we heard my phone clicking, it turns out it wrote a short text message to someone on my contact list, its nothing to do with siri as we were both silent and about to go to sleep when it happened. Has anyone else heard of this.

I had this very same problem when i did the switch. The thing was that there where two tools providing this functionality. The gnome power tool thing and some acpi feature started with systemd.
Try disabling one of them.

Similar Messages

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Very strange crash when displaying pdf tumbnails in iBooks 1.5

Hi,
Recently, I have experienced a very strange behavior in iBooks. The app opened normally and then, some seconds later, dispaly getts blak and the app closes abruptly.
I have traced back this behavior: It occurs just when the cover tumbnail of some pdf books is displayed in any iBooks' library view (both in bookshelf view and in Title view)
I removed the troubesome pdf, but found that some others ( wich worked fine fron a lot of time ago) produce just the same behavior.
When (using the painfully method of trial, and l, and trial again! And again,... ) i finally deleted all the crash - related pdf's, iBooks worked fine again.
The most intriging features related this behavior are: 1- It is related only with tumbnails. All the pdf are normally vieved using some other ipad psdf viever (such as Kdan Pdf Reader or Adobe Reader for ipad) 2- If yoy remove the cover as pdf first page ( even if you move such cover and put it as the second page, using software like pdf sam) the pdf works fine in iBooks.
I suppose this is a (annoying) bug, but,is there any suggestion? Is there any way to disable The tumbnail feature in iBooks?
Best regards

Somehow this bug came up on my radar yesterday later in the day: the first two comments indicate different plugins, and the third refers to the Acrobat plugin:
<blockquote>This seems to happen if Adobe Reader is used for displaying PDF documents (pdfjs.disabled set to true and Preferences > Applications > PDF to "Adobe Reader (in Firefox)").<br><br>Opening two tabs displaying PDFs and closing one crashes the other one.<br><br>Was able to reproduce with Firefox 36.0.1 and Adobe Reader plugin "Adobe Acrobat 11.0.10.32". When I tried to reproduce it later again in the same profile (or on Nightly and Beta), the tab didn't crash.</blockquote>
https://bugzilla.mozilla.org/show_bug.cgi?id=1113190
Sounds like your issue, but it's puzzling that they got a tab to crash and in your case only plugin-container.exe crashed.

Erratic power behavior when wall charging

Whenever I charge my iPad using the charging block and AC current, I like to turn the power off altogether, rather than just put the iPad into sleep mode.
As soon as I plug it into the wall, the iPad power comes back on. When I go to shut it off again, sometimes it stays off, but sometimes it powers off and then back on after a few seconds.
Is this normal behavior when wall charging?

The ipad cannot charge white it is off. So therefore when you plug it into the wall it turns on to charge and turn it off the ipad knows the power is there but needs to be on to keep it so it turns on..
You are actually damaging your ipad when you turn it off while charging. The reason the second time it stays off a little longer is because the ipad stopped connection until the next wave of electricity flows which is why it turns back on.

Strange behavior when opening ESS iview in new window

Hi all,
I have a problem that i find very strange. In ESS, when opening a iView in a new window, for some users the link to the ITS service gets corrupt..
An example:
http://XXXXXX:54500/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content/com.ericsson.Ericsson/com.ericsson.ESS/com.ericsson.roles/com.ericsson.EP_ESS_HRMS/com.ericsson.personal_information/com.ericsson.previous_employers/com.sap.pct.ess.persinfo.pz28&iview_mode=defaultNavPathUpdate=false&buildTree=false
If you look at this link you can see that the & sign between iview_mode and NavPathUpdate is missing and makes the launch of the iview will fail.
If I use the same link for opening the page in a new window this error does not appear.
I have tried to change the parameters that are passed on but this does not help..
Any ideas?
Cheers,
Max

Has anybody found a solution to this?
We have the same problem when calling BW Reports.
Best regards,
Manuel Schaffner

VERY strange behavior - HELP!

I don't know if anyone can help, but I have had some VERY strange Powerbook this afternoon while doing some Word processing. I was doing a quick search on the internet, when web pages would not load and applications became EXTREMELY SLOW. It was almost as if I had lost my internet connection, but everything was fully connected and fine. Anything action that I took brought up the spinning pinwheel of death. After force quitting all of my apps. and trying to restart, I continued to get the spinning wheel. After leaving the PB for nearly five minutes, the wheel was still spinning and restart did not happen.
I finally held down the power button until it shut down. After restart, I repaired permissions and received the following, which I thought was strange:
Disk Utility started.
Repairing permissions for Macintosh HD
Determining correct file permissions.
parent directory ./Users/Shared/SC Info does not exist
We are using special permissions for the file or directory ./Library/Widgets. New permissions are 16877
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
We are using special permissions for the file or directory ./usr/lib/php/build/acinclude.m4. New permissions are 33060
I understand the "special permissions" is due to the latest security update, but the secure.log concerns me. Any ideas?
Here is part of the system log as well. Any help would be much appreciated. Based on the sys.log towards the bottom, it almost looks as if there was some kind of attempted security breech on the system?
Thanks,
Joe B
Sep 24 18:46:44 localhost kernel[0]: [start] 1
Sep 24 18:46:44 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
Sep 24 18:46:44 localhost kernel[0]: Jettisoning kernel linker.
Sep 24 18:46:44 localhost kernel[0]: Resetting IOCatalogue.
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 0
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Sep 24 18:46:45 localhost kernel[0]: UniNEnet: Ethernet address 00:0d:93:2e:08:f6
Sep 24 18:46:45 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:0d:93:8c:43:18
Sep 24 18:46:45 localhost DirectoryService[43]: Launched version 2.0.2 (v350.2)
Sep 24 18:46:45 localhost diskarbitrationd[38]: disk0s3 hfs F03FF213-49C4-3229-9807-105BFEB2EF16 Macintosh HD /
Sep 24 18:46:47 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Sep 24 18:46:47 localhost lookupd[67]: lookupd (version 365) starting - Sat Sep 24 18:46:47 2005
Sep 24 18:46:47 localhost mDNSResponder: Adding browse domain local.
Sep 24 18:46:47 localhost configd[36]: WirelessConfigure: 88001003
Sep 24 18:46:47 localhost configd[36]: initCardWithStoredPrefs failed.
Sep 24 18:46:47 localhost configd[36]: WirelessConfigure: 88001003
Sep 24 18:46:49 localhost kernel[0]: ATY,Jasper_A: vram [b8000000:08000000]
Sep 24 18:46:50 localhost kernel[0]: ATY,Jasper_B: vram [b8000000:08000000]
Sep 24 18:46:50 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Sep 24 18:46:51 localhost loginwindow[70]: Login Window Started Security Agent
Sep 24 18:46:56 jbiedlin configd[36]: setting hostname to "jbiedlin.local"
Sep 24 18:46:57 jbiedlin kernel[0]: AirPort: Link Active: "ARM Wireless" - 00112402fb57 - chan 1
Sep 24 18:46:57 jbiedlin configd[36]: AppleTalk startup
Sep 24 18:47:00 jbiedlin launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
Sep 24 18:4

All,
Sorry, I couldn't get all of the sys.log on the last post, so here's the part above where the log failed.
Sep 24 17:42:55 jbiedlin configd[36]: AppleTalk startup complete
Sep 24 18:46:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 24 18:46:44 localhost lookupd[44]: lookupd (version 365) starting - Sat Sep 24 18:46:44 2005
Sep 24 18:46:44 localhost kernel[0]: vmpagebootstrap: 253637 free pages
Sep 24 18:46:44 localhost kernel[0]: migtable_maxdispl = 70
Sep 24 18:46:44 localhost kernel[0]: 95 prelinked modules
Sep 24 18:46:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 24 18:46:44 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[46]: starting
Sep 24 18:46:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 24 18:46:44 localhost kernel[0]: using 2621 buffer headers and 2621 cluster IO buffer headers
Sep 24 18:46:44 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Sep 24 18:46:44 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 000d93ff fe2e08f6; max speed s800.
Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::probe
Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Sep 24 18:46:44 localhost kernel[0]: ADB present:8c
Sep 24 18:46:44 localhost kernel[0]: Security auditing service present
Sep 24 18:46:44 localhost kernel[0]: BSM auditing present
Sep 24 18:46:44 localhost kernel[0]: disabled
Sep 24 18:46:44 localhost kernel[0]: rooting via boot-uuid from /chosen: F03FF213-49C4-3229-9807-105BFEB2EF16
Sep 24 18:46:44 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Sep 24 18:46:44 localhost kernel[0]: Got boot device =
IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiA
TA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBl
ockStorageDriver/FUJITSU MHT2080AT
Media/IOApplePartitionScheme/Untitled@3
Sep 24 18:46:44 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Sep 24 18:46:44 localhost kernel[0]: jnl: replay_journal: from: 6615552 to: 3109888 (joffset 0x8601000)
Sep 24 18:46:44 localhost kernel[0]: CSRHIDTransitionDriver::stop
Sep 24 18:46:44 localhost kernel[0]: [HCIController][start]
Sep 24 18:46:44 localhost kernel[0]: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
Sep 24 18:46:44 localhost kernel[0]: [start] 1
Sep 24 18:46:44 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
Sep 24 18:46:44 localhost kernel[0]: Jettisoning kernel linker.
Sep 24 18:46:44 localhost kernel[0]: Resetting IOCatalogue.
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 0
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: Matching service count = 4
Sep 24 18:46:44 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
[ Edited by Apple Discussions Moderator; wrap long lines ]

Strange behavior when compiled with Visual C++ 2005 Express Edition

I wrote a program for Berkeley DBXML 2.2.13 on Windows XP that executes a query 5 times and prints out the runtime for each execution. When I run the program using the Debug version of the libraries the queries take about the same time to execute for all 5 executions. When I run the program using the Release version of the libraries the execution time of the queries degrades significantly between each execution. One query takes 2 seconds to execute the first time and 20 to execute the last. I have tried recompiling the Release version without optimization and the strange behavior persists. I have run both the Release and Debug versions several times and gotten the same results, so I doubt it is a program running in the background that is slowing the execution.
This behavior does not happen when I compile the program under Unbuntu using g++, so I assume it is caused by some flag set in the Release version of Visual C++. Has anyone else experienced this behavior and know what flags I should or should not set?
Thanks for your time.
Lauren

Hi Lauren,
We've had users experience this before, and it seems to be a bug/"feature" of the default windows heap allocator. Please see this post for a bit more explanation and a solution:
Re: Performance Issue caused by XmlResults.next().asString();
John

Strange behavior when performing query

Hi all,
I'm getting some odd behavior when doing different kinds of queries and am hoping someone here can help out. I have a database with continuously updated PDML data (http://www.nbee.org/doku.php?id=netpdl:pdml_specification). I am opening anf querying the database from a seperate application. This appears to work fine for certain types of queries, and fails for other types with error messages that don't seem relevant. Specifically, some queries that use the attribute axis as the last leaf seem to get fouled up. Here are some example queries and the results I get:
First some queries that work:
Query: "string(collection()[1]/packet[1]/proto[1]/field[1]/@size)"
Result:
A valid number
Query: "collection()//proto[@name='geninfo']/field[@name='len']"
Result:
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
Now some queries that don't work:
Query: "collection()//packet/proto/field/@size"
Result:
Output to stdout - "Transaction specified for a non-transactional database"
and an Exception with message - "Error: Invalid argument"
Query: "collection()//proto[@name='geninfo']/field[@name='len']/@name" (notice it's almost identical to above working query except with @name)
Result:
Same as above, an stdout about transactions and an exception about invalid arguments
What I find most interesting is that both errors (the one printed to stdout and the one I get in my exception) don't seem to have anything to do with the problem. I know the transactional stuff isn't messed up because the exact same code works for certain queries. I'm not sure about the "Error: Invalid argument" exception, but it's not very helpful by itself. I'm using the Java library and DBXML version 2.4.16. Anyone have any ideas what's going on?
Thanks,
Dave

As a follow-up, it appears that I just needed to wrap my attributes in the XPath string() function. For example "collection()//packet/proto/field/@size" does not work while "collection()//packet/proto/field/string(@size)" works fine.
I'm still not sure why it's spitting out an error message to stdout about transactions not being enabled when the only real error is with the query, but at least it's working now.

Strange behavior when editing in full screen mode

Very recently, Aperture has been acting very strange when I edit in full screen mode. When I make adjustments, the histogram completely disappears. When I reverse the adjustment, the histogram reappears and if I make the same adjustment again, the histogram looks normal. After a a few more adjustments, half of my screen goes black making editing impossible. Anyone else ever experience anything like this?

col4bin wrote:
Very recently, Aperture has been acting very strange when I edit in full screen mode. When I make adjustments, the histogram completely disappears. When I reverse the adjustment, the histogram reappears...
yup. this usually means your system's graphic card is low on buffer cache, for example, you're running 256MB of cache on graphic card. graphic cards will run on 256MB of cache but if you're going to do photography/graphic work more buffer cache is better like 512MB or if you can afford it 1.5GB of cache, then your refresh rates will speed up
victor

Very strange sound when using VoiceOver

Hi I am using my apple tv with VoiceOver when I am whatcing one of my movies that whas both
from iTunes Store and I puch the upp bottom on my remote 2 times to get the more info about
the movie I get a very strange sound don't know how to desgribe the sound it dose only come up
when the info aout the movie is up or any popup like window or is my hearing to good for my.

And now the stranger things here... I didn't do much change to both the remote bean side and the client side, what I did is most like change it to something, and tried with failure, and change back.
But today 's morning, when I just change everything back to suppose to be, and it can find the homebean:
[2008-11-14 11:21:18,436] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) Looking up RepairEJB with JNDIName: RepairGatewayEJB_slsb
[2008-11-14 11:21:18,531] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) h is not null!!
[2008-11-14 11:21:18,532] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) got h: weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,533] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After ctx.lookup();
[2008-11-14 11:21:18,535] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) homeBean is weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,537] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After home bean;
[2008-11-14 11:21:18,589] [ INFO] [Thread-85] - Waiting for a request ...
but unfortunately again it just stopped at
remoteBean = homeBean.create();
with no errors and exceptions...
Does any experienced friends ever have this problem before?

Strange behavior when shutting down - only works once

Hi there,
I'm taking advice from around the forum to create a shutdown button for my VI. When the user sends the shutdown command, the loop stops all processes running and turns off all heaters. Then when this is complete it passes a shutdown variable to all loops allowing them to close. This seems to work perfectly once, but when I hit run again and test it again, it fails. If I abort the VI and restart again, the shutdown works. I can't quite figure out what the behavior is doing here.
Attached is my program, it's a little messy but everything works, and it has to be added to by someone who isn't me, so I tried to keep everything clear and seperate. If anyone's got any ideas as to what is causing this strange behavior I'd love to hear it.
Thanks,
Chris.
Attachments:
Main VI.vi ‏259 KB

First of all, your event loop should look something more like this. Otherwise you won't exit the loop until another event comes through.
Secondly, I think you are writing to the wrong control here (this is in your timed loop). I have no clue what is in the subVI, but I don't think it should be looking at the Shutdown PB control. That control should be in it's event case. But here you are trying to cause the shutdown event, but you are writing to the wrong control.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Event Structure issue.png ‏10 KB
wrong property node.png ‏3 KB

Strange behavior when "trying" to burn a disk.

At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)

Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8)

Strange behavior when resizing with 'Selection Tool'

Hello,
I have a really strange issue when using selection tool to resize object. I have several rectangles stacked and grouped inside a layer. When I select one of them (either in Layer panel or with Group selection tool) and switch to 'Selection Tool (V)' to resize it, this tool behaves diferently at diferent zoom levels. Only at 200% zoom it behaves as it shoul.. With 100-150% zoom result is diferent - like there's a invisible box around selected object and I'm resizing it.. I've tried to explain the issue in attached image.. Anyone knows why is this happening?
Thanks.

- make new document, size 16383x16383px
- create rectangle any width, hight say 200px (or anything less then 320px for 5% zoom)
- select rectangle and show bounding box
- try resizing hight by stretching bounding box
- this is how same selection looks at diferent zoom levels
- same zoom level as befor, hight 100px..

Strange behavior when pressing ENTER in a form page

Hi there
Please go to the address:
http://apex.oracle.com/pls/otn/f?p=20104:4
If you click the Create button, enter anything in the Name field and press ENTER while in the field, you will be taken back to the main page, the message Action Processed will be displayed, but no data will be inserted. If you click on the Create button though, it works fine.
Have anyone seen this? Any explanation for it? How to fix it? I could not find any reason for this behavior (the Name field is NOT an always submit page when enter pressed field type).
(btw the two pages are very simple, based on wizards without any customisation)
Thanks
Luis

i guess, trying the input form, the input text field for Name is an item 'textfield submit on enter'. But what happens is that when enter is pressed no additionally submit information is send, which is the case with buttons. Buttons call the doSubmit('<BUTTONNAME>') javascript function on click, allowing the process to run when thee are set conditionally.
Carl's answer by setting the process unconditional will also result this action will take place when another buton (without direct redirect) will fire this.).
So additionally when multple buttons and processes some new javascript kan be used to do the right submit on Enter. Example:
In Page header, or shared javascript import file create a JS function submitOnEnter
function submitOnEnter(submit,e){
var keycode;
if (window.event) keycode = window.event.keyCode;
else if (e) keycode = e.which;
else return true;
if (keycode == 13){
doSubmit(submit);
return false;
}else{
return true;
Then with you're item you define the js-event onKeyPress to call the function submitOnEnter
onkeypress="javascript:return submitOnEnter('CREATE',event);"

Strang behavior when creating folders

Hi all!
Ever since I went from my old tower with Snow Leopard to a new 12-core running Lion this summer, Logic has been acting strangely when I'm trying to create a new folder in the Save As... dialog window. The normal behavior would be that you end up in the new folder after creating it, while I'm now endig up in the root folder every time. Are anyone else experiencing this? It seems to be happening only in Logic.
Ginge

Yes, I'm experiencing this. Once you've created a folder you then have to go back and direct Logic to that folder before saving. Otherwise it jumps back to the root and will make another folder there thinking that there's no new folder.
No idea why but this is happening, but it started on my recent Macbook Pro upgrade too.

Very strange behavior when on charge.

Similar Messages

Maybe you are looking for