Very strange bug with my Apple Wired Keyboard

I have a very strange issue with my Apple Keyboard.
Sometimes my Apple Keyboard stopped working at my MacBook Pro Retina 15 inch late 2013. I doesn't give any input at all in all the usb ports. The strange thing is when I connect the Apple Keyboard extension cable it worked again and I can disconnect the extension cable and plug it back in with only the cable from the keyboard itself and it works as well. This happened every 2 to 3 months to me. It only happens when my MacBook is in sleep mode and I wake it up.
Can somebody please help me. What when I lose the Apple Extension cable?

Yes, a USB extension cable with a male and female end will work.
example: Amazon.com: Belkin USB Extension Cable (10-Feet): Electronics

Similar Messages

Will any usb extender work with my apple wired keyboard?

I'm about to buy a apple wired keyboard with the numeric keypad on ebay. I don't have an apple USB extender but I do have a normal usb extender that came with my old pc wifi dongle. Will this work with the apple keyboard? I've tried googleing but I've gotten many mixed answers, some saying yes some saying no.

Yes, a USB extension cable with a male and female end will work.
example: Amazon.com: Belkin USB Extension Cable (10-Feet): Electronics

Very strange bug with compareTo: returning incorrect results

Hello everyone! I have used the method compareTo many times to maintain my database project's entries. However recently I have discovered a bug, in which:
a and b both being Storage type objects:
private static class Storage {
object data
int nextData //an array stores the Storage objects
int previousData //this uses an integer to locate previous in array
Problem:
((Comparable)(a.data)).compareTo((Comparable)(b.data)) returns a 3, when a.data is clearly 5, and b.data is clearly 20.
This is very strange, as the compareTo should return a -1 instead of a positive number. Is this a known bug with the compareTo method? I have been using it reliably for many programs but this is the first time it ever occurs to me.

Problem:
((Comparable)(a.data)).compareTo((Comparable)(b.data))
returns a 3, when a.data is clearly 5, and b.data is
clearly 20.
This is very strange, as the compareTo should return a
-1 instead of a positive number. Is this a known bug
with the compareTo method? I have been using it
reliably for many programs but this is the first time
it ever occurs to me.Not really... comparing Strings "5" to "20"
is really the same as comparing "5" to "2"
being the first character of the string, difference
being, surprise, surprise = 3.
If you want the Strings to be comparable that way you should left-fill them with spaces or zeros.
Or, better still, override compareTo and make your Storage implement Comparable instead of all that casting of the data objects.

Very strange bug with AIR and native process (Windows 7, EXE)

Hello to everyone!
The situation is:
I've made an AIR Application, inside of that is running a native process - EXE file.
I'm using Flash CC as IDE and tried to use compile that as EXE with AIR 2.6 and 3.6 - results are same.
So I've insert inside a checking if Native Process is supported or not and the Native process is supported all the time.
When I've just installed the application and run it - the very first attempt is good - everything is working as a must: internal EXE is called by my Application with necessary parameters as many time as I'm need.
However if I'll close the App and then will run it again - internal EXE is not starting at all, doesn't depends on number of attempts to re-start of the App.
So only way is to uninstall, install it back and then you'll be one more session of successful internal EXE-requests, till the next re-start of the App.
That's it.
I've tried to "google it" but unsuccessful. Probably the bug is very rare.
Help me please?
Update: at compilation with Flash CC IDE it's working all the time with no any issues.
Update-2: when I'm running installator-EXE, there is going a notification "Same version is installed, etc." and then selected "Run Now" - there is also working with no problems.

Well, I've found the solution and answer by myself and here is it please:
In case with same situation as above you need to add just one line in your AS3-code
nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;
And you will be happy so much

Very strange bug: random keyboard disposition

Hi,
I just experimented a very strange bug. I have Arch installed with the XFCE desktop and Firefox3b05 from unstable. I was reading my favourite austrian newspaper online: http://derstandard.at. There's the possibility to post messages under the articles, so I clicked on "Post", and suddenly, within the posting window... my keyboard disposition went crazy. Instead of "a", I had a greek omega, instead of "s", I had a euro symbol, and so on. And more: all the other apps were suddenly affected too. I opened mousepad, same story.
I restarted X, went to the same site... and had the same experience. But after the third time, things seem to have returned to normality.
Anybody ever experienced something similar? What could this be related to? X going crazy?

Well, viewing the site is not the problem. You'd have to get an account and actually try posting a message on their message board. That's where the havoc begins.
JavaScript from hell, maybe...

Problem with ALT codes on Apple Wired Keyboard

May I just note, I have posted this in the "Boot Camp" forum, but run the normal Windows 7 on my computer. I was unable to find a forum purely for Apple hardware.
I am using a Apple Wired Keyboard (MB110B/B) -- British-bought -- on a Windows 7 PC, and I are having some issues with ALT codes. The array of symbols I have to type (pi, sigma, etc) becomes tiresome to insert via the Character Map (on Win7). Basically, entering "alt" (left handside) then 227 does not insert "π" but rather "Ò". alt + 228 (Σ) inserts õ
I don't know if this problem is common for Apple keyboard users on Windows, but is there a way to alter this.
Thanks, Jordan.

For a third opinion, be cautious of using a dishwasher as the temperature can get pretty high. If the spill is on the 456 on the number pad, you can try holding the keyboard vertically, soak just that part in distilled water for several minutes to disolve the spill material. Run some denatured (rubbing) alcohol over the numpad, then dry with a hair dryer.
You could also try to remove the key caps...slip dental floss under the key caps in two loops, one from the top one from the bottom. Pull the key caps off one at a time, the wipe the area clean...see if there is any material sticking that needs to be cleaned off.
I do not know what keyboard you have or how it does the switching, but most keyboards today do not use mechanical switches. The switches are sealed capacitance switches so if you clean all the material from the keyboard it may work again.
Or, if you don't feel like going to this much trouble, a visit to your friendly Apple Retailer to purchase a new one may be a good idea.

Apple wired keyboard - certain keys not working with shift

I treated myself to a new Apple wired keyboard MB110B/A for my mac mini.
My previous keyboard worked fine, however the new keyboard causes the computer to enter the Hardware Test mode every time the computer is restarted. The computer only starts normally without the keyboard connected (or with my old keyboard connected).
Once the computer has started, if I plug the new keyboard in, it appears to work normally with the following exceptions. The following keys do not register when the "shift" key is pressed: 2, w, s, x. This fault does not occur with my old keyboard.
As these keys are in a line, I think there may be a wiring fault inside the keyboard. If so, would this explain the computer entering Hardware Test mode every time it is started with the keyboard connected?
Thanks in advance.

Definitely sounds like a hardware fault in the keyboard to me. I assume it's the same whichever USB port it's connected to? (and if you plug it into another Mac, too)?
Of course, as that keyboard is glued together in final assembly, it's completely unrepairable.
If it's a reproducible fault (and new anyway): take/send it back for replacement. You shouldn't have any trouble with Apple arguing.

I got a external Apple Wired Keyboard (w/ NumPad), caps lock mapped to control doesn't work with tab + caps lock + shift

I got a external Apple Wired Keyboard (w/ NumPad) since I'm a developer. I have used control panel > keyboard > modifier keys to make the caps lock key the control key. I can't get it to work when I press caps lock (which maps to control) +shift + tab (which I use to change tabs backwards).
Any ideas? It works when I use the regular control key, and it works on my built-in MBPro keyboard. Thx!

Hi Steve, Welcome to apple discussions.
Hmm, that is a strange problem. Well, you've already done what I would suggest which is to go to the keyboard settings and click the "Restore defaults" button in the modifier keys window and try again. If that doesn't work then you can restart the computer and check. If that doesn't work you can try to reset the pram. Hold the optioncommand+PR buttons after you hear the startup chime, it should chime again, I let it chime a third time just for good measure and see if things look better.
If that fails then you can try making another account and seeing if the caps lock works in the new account. There might be some strange error on your account that would be corrected for in a new account. After that it gets more labor intensive. Do a system re-install, do an erase and install.
You might consider a trip to the apple genius bar there in Honolulu if can. The should be able to run through all that for you. You're still under warrantee so take advantage and get some help.
Oh, and just a disclaimer that I learned from Adam on the maccast podcast. Make a full, complete backup including a time machine and bootable (like superduper or carbon copy cloner) disk before you do any of the above or take the unit it for service.
Hope this helps.
John

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Can I use the apple wired keyboard with the iPad?

Will connecting an Apple wired keyboard through the USB connector work on a iPad?

Some people have reported success using a wired keyboard with the Camera Connection Kit. Never tried it myself, though.

Apple Wired keyboard with numeric keypad works for 10.5.6??

Hello!
I have a iBook G4 1 Ghz 256 mb of ram. I want the apple wired keyboard
With numeric keypad. My iBook is running 10.5.6. Would this work on leopard?
I don't care if the launch pad and mission control keys don't work since I have leopard.
However, on the box it says that the minimum requirements
Is 10.6.8 but some people say it'll work.
Please Help!!!
Thank You So Much

ok thanks for the tip and yes i admit i didn't see that...
but it seems a little weird to have to upgrade all the OS to Snow Leopard just to use a keyboard.
That kind of new device should be configured through a driver to download...shouldn't it ?
I presume there's no keyboard driver that can solve my problem.. ?
so you confirm that if i pay for Snow Leopard and upgrade my OS, my keyword will definitely work correctly with my Mac Mini ?
Thanks

IPod, iTunes Syncing on Leopard + Apple Wired Keyboard = Hang and problems

Sorry for the cryptic topic title but I search liked crazy and through several different sites I managed to hobble together a configuration that reproduces my problem. Maybe those terms will helps others...
Anyway, I have Mac Pro with OS X 10.5 (Leopard) and a 5G video iPod. Just recently during iTunes syncing it began to randomly hang quite early on in the process. No itunes is still responsive but it just stays on the same song forever, never making any progress. I did restore, auto vs. manual, disk space enable/disable every combination of iTunes and iPod settings I could try.
The crazy part is that I HAVE fixed the problem but I wanted Apple and others to know what to do and that is needs to be fixed correctly
Recently (same time iTunes started failing) I got the new Apple wired keyboard (love it!) but it IS the problem (or rather the combination of stuff). If I just unplug that keyboard during the iTunes sync it works every time, plug it back in and it hangs again next time iTunes syncs.
So maybe someone else is having this problem, I hope you find this forum and I hope Apple already knows about this glitch.
Thanks!

I'm only going to tackle one of your issues; that of "recently added" playlists being whacked out when added to iPhones/iPods.
Here's the issue: You set up a smart playlist with a "recently added" criterion. The playlist looks fine in iTunes, and it displays all the recent music you've added to your library properly.
You then sync to your iPhone, and low and behold, all the tracks in that playlist do not match anything that had shown in iTunes. Believe it or not, this is a really old iTune bug. If memory serves me, it goes back to iTunes 6 or maybe earlier.
There are two known work arounds:
1) you turn off "live updating." This is very poor work around, because most people use a recently added playlist to automagically add their newest music to their device. Turning live updating off defeats the point.
2)create a second smart playlist that points to the first one. What I mean is, if you have a playlist called "Newest 250 tracks" and that is the smart playlist that shows up incorrectly on your iphone, then set up a second smart playlist called "Newest 250 tracks iPhone" and the only criterion in it, is that is populates from playlist "Newest 250 tracks." It will then look identical to your first playlist, but because it doesn't contain a "recently added" criterion in itself, it will avoid the bug. So sync to that second tiered playlist, and all is well.
Yes it's stupid to have to make a second "meta" playlist for every recently added playlist, but c'est la vie.

Apple Wired Keyboard Causing Bootcamp Boot Freeze

Hello everyone,
I discovered a very serious issue with my late 2009 21.5" iMac. Whenever I would attempt to boot to my Bootcamp partition, the system would freeze on the selection screen. After months of trying various things, including a complete reformat of the drive, I have found that the issue is being caused by the fact that my Apple wired keyboard is plugged into a USB port. I have found a workaround, which is to set the Bootcamp partition as primary and unplug the keyboard before the system boots, but this is a very large pain in the neck. Can anyone suggest a fix?
Thank you in advance for any help!

Yes. It started out as an intermittent issue. A few reboots generally got Bootcamp to start. But it became worse over time. I deleted and reinstalled Bootcamp/Windows several times before this. Last week the issue came up again. I tried deleting the Bootcamp partition/reinstalling Windows again, but this time it would hang during the installation process. I went so far as to reformat my whole drive, but that did not resolve the issue either. All this took place over the course of several months, off and on. I dont use Bootcamp very often.
Thank you for the suggestion! I'll check it out.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

ITunes 10.5 playing/pausing when pressing enter or backspace on apple wired keyboard

As above really. I'm running Lion and iTunes 10.5
My apple wired keyboard plays a song (opens itunes and plays first song) when I press enter and backspace. Hugley annoying when word processing.
It's happened once before but I can't remember what I did to fix it.
Please help if you can.
Thanks,
Toby

Shift and w doesn't work either. Every other letter is fine and caps lock works correctly, even with w
Any help much appriciated.

Very strange bug with my Apple Wired Keyboard

Similar Messages

Maybe you are looking for