Very strange error, cannot reinstall or delete itunes

Hello, I'm havin some serious trouble reinstalling iTunes after i got the error that it wasnt installed correctly. seems there might be something screwy in my registry seeing as when i attempt to install it stalls it says this
could not open key :
HKEYLOCALMACHINE\software\classes\interface\{914DA835-02FE-4953-92FA-624BDF5D85AB}ProxySt ubClsid. Verify that you have sufficient access to that key, or contact your support personnel

I'm having the exact same error. Not only can't I upgrade iTunes to 7.5, but on my machine 7.4 is broken now. I was going to try a clean install, but I can't even uninstall iTunes.
When installing iTunes this is the error I get:
Then the install rolls back. When loading iTunes I get this error:
And when using regedit to edit any of the sub keys to that key I get this message:
I'm on an OEM version of Vista Home Premium.
I don't know if this uneditable registry key is an iTunes problem or a Vista problem, but I'm seriously frustrated with it. Any help would be appreciated.
Also, I don't know if this is connected but I've noticed that the last two times Adobe Reader tried to auto-update it failed, but doesn't say why. Could be connected to a locked registry entry like this?
Message was edited by: dmj2012

Similar Messages

Very strange error: unable to activate any messgae mapping in IR

very strange error,
i m unable to activating any message mapping in IR,
while activating the error thrown was:
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
My observation:
On looking at the error, i found that the folder Mapdddd0cb0100311dca6090012799eddc6 is not created at the proper place.....
Which i assume is created dynamically created on activating a message mapping,
Now, i saw that the directory in which these Map* folders were created, already contained 32765 folders....... since this machine is UNIX, the max no. of directories that can be inside a directory cannot be more than 32768(not confirm).....
hence the folder Map* cant be created at the proper place...and hence message mapping cant be activated.........
ever encountered this problem....................
pls help

solved by self,
solution: delete temporary folders created during any activation of message-mapping in IR, in the classpath_resolver folder of XID HOME directory......
solution is specific to file system/OS....

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Very strange error in text properties - AI CS6

Hello Everyone,
This morning I found very very STRANGE error in Adobe CS6 about text properties. Here you go.
In the picture one text 'ei and mosterd' was bold.
But after copy to new string the bold characters are changed to 'ig and mosterdz'.
This is very strange error I have seen ever.
Do you guys have any reason why CS6 act like this?
also do you have any option to fix this issue?
For your information:
I just done copy past. Nothing else.
All the properties are same for both.
No difference except the text string size
I tried the same file in different machines for check. But I still see the same error in all the machines.
System properties:
Mac os x: 10.8.5
Processor 2,8 Ghz Intel Core i5
Memory: 8 GB
Software: Adobe CS6
Regards,
FroQ

Wow, this is absolutely incredible... you try to parse an empty String to an int and it throws an exception... I'd never have thought.

TS1368 Has anyone found this article useful? Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

Hi paul.labiche,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

HT1923 how do I retrieve and reinstall a deleted iTunes song to the appropriate Album?

How to retrieve and reinstall a deleted iTune song to the appropriate album?

Please read before going through with this procedure.
If you really want your contact back and you did not do another iCloud backap since you deleted some of your contacts, you can do a hard reboot on both devices with iClouded contacts by holding down the home and lock buttons on each of them for 10 seconds ignoring the slide to turn off thing. Make sure you have iCloud contact services off before doing so. You can then go through the whole set up process until you get up to the backup part. You then press to restore from an iCloud backup (make sure you choose the right backup for the right phone). If you didn't make an iCloud backup before the contact incident, you will have to use your two-month-old iTunes backups. Each phone should have their contacts the way they were from your last backup. You then go into Settings>iCloud>and turn off contacts. You then can choose if you want to keep your current contacts or not. Turn this off on both phones just incase you add another iCloud device to the mix later on. Now your contact lists are no longer linked (Caution: side effect may include lack of edit button). You may now add and delete contacts as you please without it happening on your other phone.
Thank you for choosing Apple.

Strange error: cannot save jpg

I have a very strange problem with a jpg image. it's an RGB thumbnail of 135 pixels x 117 pixels.
I open an existing jpg.
I paste something in the image and flatten it...
then I try to save it under a new name but it will not save and give the following error: Could not save (pathname) because of a program error.
now the strange thing is: if I do an image size to 134 x 116 pixels. (or 136 x 118) the image saves fine!
If I then resize it back to 135 x 117 pixels...it won't save anymore and the error is back.
if I don't flatten the image.. i can also save it as a jpg. If I flatten the image and try to save: the error is back.
I can save other images as jpg without any problems.
any idea what may cause this?
(I use Photoshop CC on windows 8.1)

I've run into the same issue here...not all the time, but when it happens, it's easily replicable as soon as I paste as a new layer then flatten. Of course, today, I can't get it to misbehave.
The only workaround I figured out was to copy the whole flattened image and create a new document, which I was then able to save.
The only thing I can think of is that my Mac is bound to an Active Directory, so it's logged in as a "mobile" account. I know this caused permissions problems in previous versions.
Here is an excerpt from /Library/Logs/generator_2.txt
Scheduling change to layer 1 of 7485
Creating change context for layer 1
Updating layer 1 ("Background") of document 7485 { id: 1, pixels: true, atRootOfChange: true }
Not deleting directory "/Volumes/2TB/Thompson/thompson1453-assets": it doesn't exist
Photoshop event: messageID: 8, name: imageChanged, parsedValue: {"version":"1.1.0","timeStamp":1390949620.706,"count":2,"id":7485,"layers":[{"id":1,"pixe ls":true}]}
Emitting Photoshop event: [ 'PHOTOSHOP-EVENT-imageChanged',
{ version: '1.1.0',
    timeStamp: 1390949620.706,
    count: 2,
    id: 7485,
    layers: [ [Object] ] } ]
Image 7485 was changed: {
    "version": "1.1.0",
    "timeStamp": 1390949620.706,
    "count": 2,
    "id": 7485,
    "layers": [
            "id": 1,
            "pixels": true

Very very strange issue: no more activation possible (iTunes 8.2.1 on a G3)

At first, i came back to iTunes 8.2.1 because using 9.1 is no fun on a G3 PowerBook (the loudness adjustment makes the computer unusable for hours, then the vents roar and the machine crashes!).
OK, because i still wanted to remote the G3 with my iPod touch, i got iTunes 8.2.1 wich runs very good on such an old computer. I am pretty shure that i already had this version on this computer, because i made almost every update... I use this computer just for listening Music! This Computer was activated all the time and with all Versions of iTunes - from 4.0 to 9.0 !!!!
What happens now is very VERY strange and i am loosing my mind. The apple support can't help me (they also resetted all my activations).
It sounds simple, but i am no more able to activate this iTunes!!! Everything is typed well, but no chance. It says everytime that the name or password is wrong. I also can't activate Genius!
I promise, tried everything: my last attempt was to make a complete Reset of the machine (i erased the whole disk and installed everything(!!!!!) from scratch!)
But with no luck - this machine will not let me f*/("&§ng connect to my account were i payed lots of euros for my music!!!!!!!
This is in fact the strangest thing that i ever gone through on computers (and i've seen lots of strange things, believe me!)
I hope that somehone could give me a hint...

I actually found the window hiding at the bottom of my screen, being covered by my dock, and was able to drag it up.
You can also go into System Preferences, then dock and then move your dock to the left or right to find the window.

Very strange errors on newest WLC version (4.1.171.0)

Hello,
I have just finished upgrading my WLC 4404's to the newest version (bootloader and all), and am running into a series of strange errors.
The initial upgrade occured on May 8th, and ever since then my WCS (4.0.97.0) has been swarmed with minor security errors related to the access points.
I have 129 APs in my network, and so far about 60 have shown up with these errors.
The errors state:
"Client '<MAC1>' which was associated with AP '<MAC2>', interface '1' is excluded. The reason code is '1(802.11 Association failed repeatedly)'".
and
"Client '<MAC1>' which was associated with AP '<MAC2>', interface '1' is excluded. The reason code is '3(802.1X Authentication failed 3 times.)'"
I have tested some of the APs listed and am having no trouble associating or authenticating (though I have yet to test them all).
The strange thing is, <MAC1> on both error message types is actually my AP's MAC addresses, whereas <MAC2> is the Client's MAC (as far as I know). So it looks like the Mac's are being listed in the wrong order. I checked the caveat's on the release notes for this version but found nothing on this apparent bug.
I know it seems like a typical authentication error (with the odd MAC placements as the exception), but these just started coming up after the upgrade - mainly wondering if that's just coincidence or a bug in the version?
Thanks in advance for anyone's input.

To Ankur,
It's more than 2 clients, seems to be just random people trying to connect as far as I can tell - random APs also.
Unfortunately I can't confirm the security settings on the client laptops as they are not supplied by the education facility I work at (they're personal computers). I imagine it is possible that it could be a client misconfiguration problem.. we have just started a new term so there's a good possibility alot of new laptops are on campus. I'll have to look into it.
To Eric,
The AP's are the same software version as the WLC's, but they are on different Boot versions (since 4.1.171.0 the software and boot images are on different files). I loaded the new boot image this morning on the controllers but it doesn't look like it pushed through to the APs..do you think that could be the cause of the WCS thinking the AP's are clients?
The AP's boot image is still only 2.1.78.0 on all the AP's I looked at, are these supposed to update?
Thanks for the replies guys.

VERY strange error message and behavior from ipod and itunes software

Hi. I have two major issues with itunes 7.02 and ipod.
1) After a successful install, and after double-clicking my desktop itunes icon, the program opens, but it takes about 5 minutes to load (I kid you not, maybe longer)... I have tried uninstalling and reinstalling 5 seperate times and it never opens any quicker. Please help, extremely frustrating.
2)THE BIGGER PROB: I get the following error message when connecting my ipod (video) to my computer (itunes is already opened at this point, as it does NOT open automatically): " The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the ipod's software. Problem is, I have reinstalled itunes 5 or 6 times already! HELP! Thank you!

in sorry i cant help with the speed thing,
make sure you install all the software from the CD your ipod came with, if that dosent work, try updating your ipods firmware : http://www.apple.com/ipod/download/
Good luck and welcome to the forums
Joe

Insufficient privileges, permissions error, cannot authorise computer for Itunes

I am trying to authorise my computer to itunes and get this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
How do I add my computer to the devices on itunes if I do not appear to have the correct privileges or permissions?

Yes, this worked for me. I was hesitant to use terminal b/c I know that an error could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page you recommended and *pasted* it into terminal. In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal, and people who are not computer savvy or comfortable using a command line app will be intimidated by Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.
Also, before I could do anything in terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). People need to know how to do that, too. For the casual user who just wants to watch or listen to their iTunes purchases, this can all be pretty intimidating and frustrating. I like to experiment and see what different GUI commands do, and try out freeware, but even I am cautious about using Terminal.

DEP error- cannot resolve and use itunes

Desperate about not being able to use my Itunes due to this DEP error- data execution error.
Now 5 times and still no joy. I have uninstalled 5 times, but noticed i did not have in first uninstall, the QT part of Apple but it worked before without it.
I am using Vista windows and recently using Chrome Google as Internet Explorer has had some virus on it.
I would be pleased for a remedy to this, very much
much favour and thanks
Sian Sweden

Try installing the latest version of the QuickTime Player.
Here's a download location:
http://www.apple.com/quicktime/download/

Medium Write Error, cannot burn CD in iTunes (Toast works fine)

I have always used iTunes to burn my CDs. Today I keep getting a Medium Write Error. I tried buring the same playlist with Roxio Toast and worked fine. Then the error happened again on iTunes.
I have been using iTunes for years on this computer. Why would it suddenly give an error? The error happens while the disc is finalizing. There is nothing wrong with the drive, as evidenced by Toast writing fine. Is there any way to fix this or do I just need to use Toast from now on?

I'm having the same problem!! I've successfully burned 3 different CD's. Now I'm getting a 'burn cancel' unknown code. Very frustrating. All CD's are good, even new!
Can anyone share any thoughts??
Thanks in advance!!
Amy

Migration from 8i to 9.0.1(very strange error)

Hi All,
I have a really weird problem. I have 3 different 8i databases (8.0.5, 8.1.6, 8.1.7) and all of them work properly. I have an Oracle 9i (9.0.1) database on another server as well. I used Oracle 8i export(exp command line) to export 8i databases and then used Import 8i (imp command line) to import them to 9i database. Without any error & warning it's done. Everything seems ok on 9i database, but when I issue a very simple query in sqlplus as follow:
SELECT
Table1.column1
FROM
Table1
WHERE
(Table1.column1 = '01' or Table1.column1 is null )
It returns 1 row, which is true. But if I change the query as follow:
SELECT
Table1.column1
FROM
Table1
WHERE
(Table1.column1 = '01' or Table1.column1 is null )
AND (1=2 or 1 in nul)
again it returns one row which is wrong because of that false condition (1=2 or 1 in null), It shouldn't return any rows. But if I create a new table as select * from table1, then it works for new table. So conclusion is something happening at the time of importing to 9i. What is that!? I don't have any idea ! (I did this process for all three 8i databases and got the same result)
If anybody has any comments, I would appreciate it.
Thanks,
Arash
P.S. I did everything to fix the problem ( Reinstall Oracle 9i, create a new database from scratch,...)

Thanks for your time. I did all possible way, but still the same problem. I mean
EXP 8... IMP 8
EXP 8... IMP 9
EXP 9... IMP 9
Today I found that, NLS_LANG of two databases are different. Oracle 8i is : WE8ISO8859P1
AND Oracle9i is : WE8MSWIN1252
So I created a new database from scratch with Oracle 8i character set :WE8ISO8859P1 and then use imp9i to import the file. Still the same problem.
Thanks,
Arash

Very strange error "(Hex 0xBFFF003E) Could not perform operation because of I/O error"

Hi everyone! I've seen many similar threads but I haven't found an answer. I'm using labview 8.5 and through visa i'm controlling a USB controller which communicates with an FPGA. This pcb, is connected to a second pcb which also has another FPGA and the data are transmitted from the usb controller to the first FPGA and to the second FPGA (and vice versa). The really strange thing is that the system had been working fine for severall months but now this error appears when i remove from its connector the jtag i use to program the FPGA located on the second pcb (!!!) and everything goes back to normal when i place it back! Could it be a hardware problem?

Hi,
What protocole are you using to communicate to the board? If it is VISA then it could be a problem with the COM ports and resources on your computer. Is the session connecting to the FPGA still active when you are disconnecting it?
Regards,
Greg H.
Applications Engineer
National Instruments

Very strange error, cannot reinstall or delete itunes

Similar Messages

Maybe you are looking for