Very Strange K7n2delti ILSR Harddisk Issue
Not happy.
Purchased the system board barton 2500 1 gig 333ram
The ram makes the bois beeps, i'm getting it replaced but my real problem is now with harddisks
Started with a WD1200JB no problems, added a Seagate Serial ATA drive and all of a sudden this problem started happening.
In OS and drive would make this "whirrrr click" sound like it was trying to attempt to read something from the disk but couldnt
Thought it was a problem mixing serial ATA and my WD1200JB, removed the WD1200JB and just used the Serail Seagate.
Problem still happened.
Used just the WD1200jb installed os.. everything fine for a week again then..
Problem still happened.
Tried yet another regualr disk everything was fine for a while then
Problem still happened.
Removed all non essential power drains from the 450psu reset the bois reinstalled just using my usb modem and mouse.
Problem still happened.
This is not just a windows driver problem with the drivers being as the Whirr click sound can start as soon as boot.
There seems to be no way on the bois to completly disable the promise serial controller.
Think the problem could just be on IDE0 so im thinking is the onboard IO shot on the system board or what??
Is this a common problem?
post psu max amps 3.3 5 and 12v and make model
^^ Standard 450 job, no idea on details m8, the fact that everything was working for so long and i've removed devices makes me think this aint really the issue now.
is the wd jumperless if it has no slave on the ide
^^ the wd is set to master my other drive set to slave. However this problem happens whether i use one sata drive only, one ata133 drive only or any combination. I don't think its the drives.
did you install raid drivers when you tried the sata
^^ Setting up winxp you have to hit f6 to specify the xp promise controller drivers, the os ones were tripple checked. (However again this problem happened when using only ata133 drives also rules it out)
did you go in raid bios and create an array
^^ Did when using the SATA drive. when removing the sata drive i tried the ctrl f or whatever the button combo to enter the drive configuration to remove it, but it said bois is not installed etc. which i took to mean (no drive connected so im not gonna load)
I'm thinking its a problem with the promise controller itself or the onboard i/o ?(
Thanks for your help its appriciated.
Similar Messages
-
Very strange internet connection speed issue,
Good Evening all.
I have a strange issue. I got hooked up with a new ISP a few weeks ago and since that time I have had very slow PC connection speeds. I have done speed tests, and I get between 16 and 17mbps down, but the PC runs and acts like I am getting 4 to 5mbps. I have a Compaq Presario running Windows Vista Home Premium. Service Pack 2. There is 3 gig of ram and a 3ghz processor, with a 32 bit OS.
Here is how the setup looks. The netgear modem is plugged into a regular phone jack and then goes through a router and then it is hardwired to the PC. If I wire the PC direcly to the modem instead of going through the router, I get the same mbps no matter what. Between 16 and 17.
The wierd thing is that I can watch a movie on Netflix through my Wii with no issues. This is strange to me because I would figure there to be more issues with wireless connections rather than wired connections.
I have a netgear modem and a netgear router.
I am almost wondering if my PC is not processing the incoming speed correctly. I don't know if this is correct, because I used to have Xfinity internet before this new internet and had absolutely no problems. BTW my new ISP is called Edge Networks. The boast speeds up to 30mbps. I know that 16 to 17 is pretty good, I just do not know why It seems like I am not getting anywhere near that.
While on the subject, I also have another PC that I have gotten a USB adapter and am using wireless to access the internet. This PC gets 5 to 6mbps down. It is a Compaq running Windows 7 Home Premium Service Pack 1. It has 3 gig ram and a 64 bit OS with a 2.3ghz processor.
I do not have a clue why I have such slow inernet page loading speeds, other than the possibility that my PC's are just severly outdated.
Can anyone help explain this issue?Evadfa, welcome to the forum.
I suggest contacting your ISP for help with the problem. They should be able to help you since they know their product better than anyone. I don't believe that it is a computer problem, since it is happening on two separate computers.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Files transferred to external HD end up in trash - very strange issue
Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?
-
A very very strange issue on BlazeDS Deserializing
Hi all,
I run into a very very strange issue on BlazeDS Deserializing. Is there any hint or idea? Thanks a lot!
Scenario 1:
Both the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine.
Actual result:
Everything works fine. All the properties in the Flex Object could be mapped to the Java Class
Scenario 2:
The browser(firefox or IE) and the midtier (BlazeDS ,java) are on the different machine.
Actual result:
Sometimes it works fine.
And most of the time it does not work fine. Only the data in List is mapped correctly. All the values of simple data type such as int are mapped to 0 .
Let me simplify the problem.
The objects of Class B is always stored in the ArrayCollection assocItems of Class A
Flex side:
public class A {
public var id: int;
public var name: String;
public var assocItems: ArrayCollection=new ArrayCollection();
public class B {
public var id: int;
public var assocItems : ArrayCollection=new ArrayCollection();
The id , name in Flex Class A and assocItems in Class B could be deserialize to correct value . But the id of Class B is always mapped to 0. This is not correct.
The log level of BlazeDS is configured to Debug. From the log I can see that each value is passed from Flex side to Java server side correctly.
[BlazeDS][INFO] Channel endpoint my-amf received request.
[BlazeDS][DEBUG] Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/18)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
However, the Java object does not get the correct value of B.id.
In conclusion,
1. It’s an issue with only default types
2. It does not occur every time
3. It does not occur when the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine
Have you ever run into the similar problems? And what’s your solution?I checked, when I hard-code the constant in linq, the generated sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ('1062303212007000121' = "Extent1"."AA")
if I pass a variable to the query with same value, the sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ("Extent1"."AA" = '1062303212007000121' /* @p__linq__0 */) (@p__linq__0 is passed as parameter)
The only difference is a paramter. I can't figure out why there is such a impact on performance. -
Premiere Pro CS5.5 -very strange issue with the color tones and Preview-
I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!? -
Very Strange Touchscreen Issue
I recieved and activated my new 8GB iPhone about two days ago and it worked great up until just a few hours ago. I am experiencing the known issue of the bottom 1/2 inch or so of the touchscreen not responding to my touch, which in turn is affecting a lot of main elements of the phone such as SMS, e-mail, iPod, etc. Among that issue, I also encountered a very strange occurrence whilst I was testing the 'dead zone' on my iPhone: Certain sections of the dead zone work if I hover my finger about 2 -3 centimeters from the screen. It is a very strange thing but true, lol. I can even capture video footage of this if it's necessary.
Since I bought my iPhone from an AT&T store, should I return it to them for a new one on the spot or should I do it through Apple? I hope it doesn't come down to the latter since I do not live anywhere near an Apple Store (New Orleans, LA) and I just switched from T-Mobile to AT&T so I'd really hate to purchase a cheap temporary phone while my iPhone is being replaced/fixed.
Edit: Have a Merry Christmas, everyone!
Message was edited by: FiyerstormI just talked to Apple Support and they are going to repair it for me, it's just I need to wait til Friday since I am broke from Christmas! Once I get paid, then I can dish out the 30 dollars to get a rental iPhone to hold me over. The restore temporarily fixed the touchscreen issue since it happened again hours later.
Also, nobody I know who would have a spare AT&T phone doesn't come to mind so I can't just borrow a phone and start the repair process now, but the wait isn't too bad. At least they do not limit the iPhone rental to just physical Apple Store customers!
Thanks for the help, folks. :V -
At first, i came back to iTunes 8.2.1 because using 9.1 is no fun on a G3 PowerBook (the loudness adjustment makes the computer unusable for hours, then the vents roar and the machine crashes!).
OK, because i still wanted to remote the G3 with my iPod touch, i got iTunes 8.2.1 wich runs very good on such an old computer. I am pretty shure that i already had this version on this computer, because i made almost every update... I use this computer just for listening Music! This Computer was activated all the time and with all Versions of iTunes - from 4.0 to 9.0 !!!!
What happens now is very VERY strange and i am loosing my mind. The apple support can't help me (they also resetted all my activations).
It sounds simple, but i am no more able to activate this iTunes!!! Everything is typed well, but no chance. It says everytime that the name or password is wrong. I also can't activate Genius!
I promise, tried everything: my last attempt was to make a complete Reset of the machine (i erased the whole disk and installed everything(!!!!!) from scratch!)
But with no luck - this machine will not let me f*/("&§ng connect to my account were i payed lots of euros for my music!!!!!!!
This is in fact the strangest thing that i ever gone through on computers (and i've seen lots of strange things, believe me!)
I hope that somehone could give me a hint...I actually found the window hiding at the bottom of my screen, being covered by my dock, and was able to drag it up.
You can also go into System Preferences, then dock and then move your dock to the left or right to find the window. -
Very strange performance issue
Hi!
I've got a very very strange performance problem and I have no more ideas what it might be:
The following code fragment contains the useless line int count=0;
However, deleting the line reduces(!) the execution speed of the program by ~30%. This is not only weird because the line is absolutely useless, but also because the whole function only takes <1% total execution time in the program.
public void simuliere_bis_soll_erreicht()
int count=0; //????
while(welt.soll_simulationszeit>welt.ist_simulationszeit && simu_active)
simuliere_einen_schritt();
}The problem occurs both under Java 1.5 and 1.4.2, using the HotSpot-Client.
Cleaning and rebuilding the project does not help.
It occurs on different computers in the same way, too.
Thank you very much in advance! :-)
Mirko Seithewell, this is what you get:
1.) run totally interpreted since compilation threshhold is reached (1500 (client jvm) - 10000 (server-jvm)
2.) start background compilation, run further in interpreted mode till compilation finishes (depends on code, but about 1000-10000)
3.) run compiled code
so this is what you get:
~20.000 invokations interpreted (about 70-90%n of total time)
~80.000 invokations compiled (30-10% of total time)
maybe your int takes much longer to optimize, so the loop executes much longer in interpreted code.
I would not bet on such microbenchmarks, since they do not tell you real stories under real circumstances. Believe me, I am the programmer working on performance optimizations in the company I am employed.
lg Clemens -
Trying to do something very strange with layouts and painting components
I'm trying to do something very strange with changing the layout of a container, then painting it to a bufferedImage and changing it back again so nothing has changed. However, I am unable to get the image i want of this container in a new layout. Consider it a preview function of the different layouts. Anyway. I've tried everything i know about swing and have come up empty. There is probably a better way to do what i am trying to do, i just don't know how.
If someone could have a look perhaps and help me out i would be much appreciative.
Here is a self contained small demo of my conundrum.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.border.LineBorder;
// what is should do is when you click on the button "click me" it should place a image on the panel of the buttons in a
// horizontal fashion. Instead it shows the size that the image should be, but there is no image.
public class ChangeLayoutAndPaint
private static JPanel panel;
private static JLabel label;
public static void main(String[] args)
// the panel spread out vertically
panel = new JPanel();
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
// the buttons in the panel
JButton b1, b2, b3;
panel.add(b1 = new JButton("One"));
panel.add(b2 = new JButton("Two"));
panel.add(b3 = new JButton("Three"));
b1.setEnabled(false);
b2.setEnabled(false);
b3.setEnabled(false);
// the label with a border around it to show size in a temp panel with flowlayout to not stuff around
// with the actual size we want.
JPanel thingy = new JPanel();
label = new JLabel();
label.setBorder(new LineBorder(Color.black));
thingy.add(label);
// the button to make things go
JButton button = new JButton("click me");
button.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
//change layout
panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
panel.doLayout();
//get image
BufferedImage image = new BufferedImage(panel.getPreferredSize().width, panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
Graphics2D g = image.createGraphics();
panel.paintComponents(g);
g.dispose();
//set icon of jlabel
label.setIcon(new ImageIcon(image));
//change back
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
panel.doLayout();
// the frame
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(400,200);
frame.setLocation(100,100);
frame.getContentPane().add(panel, BorderLayout.NORTH);
frame.getContentPane().add(thingy, BorderLayout.CENTER);
frame.getContentPane().add(button, BorderLayout.SOUTH);
frame.setVisible(true);
}Looks like you didn't read the API for Container#doLayout().
Causes this container to lay out its components. Most programs should not call this method directly, but should invoke the validate method instead.
There's also a concurrency issue here in that the panel's components may be painted to the image before revalidation completes. And your GUI, like any Swing GUI, should be constructed and shown on the EDT.
Try this for size -- it could be better, but I've made the minimum possible changes in your code:import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import javax.swing.border.LineBorder;
public class ChangeLayoutAndPaint {
private static JPanel panel;
private static JLabel label;
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
// the panel spread out vertically
panel = new JPanel();
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
// the buttons in the panel
JButton b1, b2, b3;
panel.add(b1 = new JButton("One"));
panel.add(b2 = new JButton("Two"));
panel.add(b3 = new JButton("Three"));
b1.setEnabled(false);
b2.setEnabled(false);
b3.setEnabled(false);
// the label with a border around it to show size in a temp panel with flowlayout to not stuff around
// with the actual size we want.
JPanel thingy = new JPanel();
label = new JLabel();
// label.setBorder(new LineBorder(Color.black));
thingy.add(label);
// the button to make things go
JButton button = new JButton("click me");
button.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
//change layout
panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
//panel.doLayout();
panel.revalidate();
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
//get image
BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
Graphics2D g = image.createGraphics();
panel.paintComponents(g);
g.dispose();
//set icon of jlabel
label.setIcon(new ImageIcon(image));
//change back
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
//panel.doLayout();
panel.revalidate();
// the frame
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(400, 200);
frame.setLocation(100, 100);
frame.getContentPane().add(panel, BorderLayout.NORTH);
frame.getContentPane().add(thingy, BorderLayout.CENTER);
frame.getContentPane().add(button, BorderLayout.SOUTH);
frame.setVisible(true);
}db
edit I prefer this:import java.awt.BorderLayout;
import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.*;
public class LayoutAndPaint {
JPanel panel;
JLabel label;
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
new LayoutAndPaint().makeUI();
public void makeUI() {
JButton one = new JButton("One");
JButton two = new JButton("Two");
JButton three = new JButton("Three");
one.setEnabled(false);
two.setEnabled(false);
three.setEnabled(false);
panel = new JPanel();
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
panel.add(one);
panel.add(two);
panel.add(three);
label = new JLabel();
JButton button = new JButton("Click");
button.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
layoutAndPaint();
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(400, 400);
frame.add(panel, BorderLayout.NORTH);
frame.add(label, BorderLayout.CENTER);
frame.add(button, BorderLayout.SOUTH);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
private void layoutAndPaint() {
panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
panel.revalidate();
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
Graphics g = image.createGraphics();
panel.paintComponents(g);
g.dispose();
label.setIcon(new ImageIcon(image));
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
panel.revalidate();
}db
Edited by: DarrylBurke -
I have over 4000 songs in my Itunes library. I have 25-30 playlists set up. I just did a sync on my daugthers itouch and 85% of my playlists dissappeared. i rebooted my pc....playlists are still not there. The songs are still in my library. Very strange. Any Advice appreciated
Thanks, Michael. Itunes Match is not enabled on my daughter's Itouch. I have subscribed to it and have used the service to back up my song purchases. I merely did a sync via USB (as normal) to her Itouch. The sync wiped out 85% of the playlists that were on my home computer for the last seveal years. I have updated her itouch multiple times - both before and after I had subscribed to iTunes Match. After the last sync to her iTouch, the playlists just disappeared. My home computer is the main device I use to manage my Itunes library and my playlists. I am not sure what happened?
BTW - how are you affiliated with Apple? Are you? I feel like I have explained the issue pretty clearly, but your responses seem to focus on her iTouch and not my computer, where the playlists are managed. I want to know how to get the playlists back on my computer.
Thanks for your help. Rob -
VERY strange lag on a Dell Optiplex 760
I thought it would be a good idea to keep a 16GB flash drive on my keychain that booted Arch so I could work on HW for college in a consistent OS! Everything is working great so far, but I ran into a very strange problem with a Dell Optiplex 760. During the normal Arch init process, everything loads great, except for when it gets to the udev stage where everything hangs. But here's the strange part of this scenario: the problems go away when I start typing random keys or move the mouse! If I don't do this, the system hangs completely from what I can tell. This happens at the console and with X.
The service tag for this machine is FDCQQJ1, and the dell.com driver area brings up this list of hardware and (windows) drivers for it.
Here's the #lspci -vv of the system:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec90 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41d1
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 000000007e000000-000000007e1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 000000007e200000-000000007e3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 027f
00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at eca0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecb0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
I have googled around a bit, and I've read about others (surprisingly) having the same issue, but I've found no answers to my avail yet.Here are the packages installed on my system, with versions (output of pacman -Qs):
local/a2ps 4.14-1
a2ps is an Any to PostScript filter
local/a52dec 0.7.4-4
liba52 is a free library for decoding ATSC A/52 streams.
local/acl 2.2.48-1 (base)
Library for filesystem ACL support
local/alsa-lib 1.0.22-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.22-2
An alternative implementation of Linux sound support
local/aspell 0.60.6-4
A spell checker designed to eventually replace Ispell
local/ati-dri 7.7-1
Mesa DRI drivers for AMD/ATI Radeon
local/atk 1.28.0-1
A library providing a set of interfaces for accessibility
local/attr 2.4.44-1 (base)
Extended attribute support library for ACL support
local/autoconf 2.65-1 (base-devel)
A GNU tool for automatically configuring source code
local/automake 1.11.1-1 (base-devel)
A GNU tool for automatically creating Makefiles
local/avahi 0.6.25-3
A multicast/unicast DNS-SD framework
local/b43-firmware 4.150.10.5-1
Firmware for Broadcom B43 wireless networking chips
local/b43-fwcutter 012-1
firmware extractor for the bcm43xx kernel module
local/bash 4.1.002-2 (base)
The GNU Bourne Again shell
local/beanshell 2.0b4-1
Small, free, embeddable, source level Java interpreter with object based
scripting language features written in Java
local/bin86 0.16.17-4 (base-devel)
A complete 8086 assembler and loader
local/binutils 2.20-3 (base)
A set of programs to assemble and manipulate binary and object files
local/bison 2.4.1-1 (base-devel)
The GNU general-purpose parser generator
local/bzip2 1.0.5-5 (base)
A high-quality data compression program
local/ca-certificates 20090814-2
Common CA certificates
local/ca-certificates-java 20090629-2
Common CA certificates (JKS keystore)
local/cabextract 1.2-2
A program to extract Microsoft cabinet (.CAB) files.
local/cairo 1.8.10-1
Cairo vector graphics library
local/cairomm 1.8.4-1
C++ bindings to Cairo vector graphics library
local/cdparanoia 10.2-2
Compact Disc Digital Audio extraction tool
local/cloog-ppl 0.15.7-1
Library that generates loops for scanning polyhedra
local/compositeproto 0.4.1-1
X11 Composite extension wire protocol
local/consolekit 0.4.1-2
A framework for defining and tracking users, login sessions, and seats
local/coreutils 8.4-1 (base)
The basic file, shell and text manipulation utilities of the GNU operating
system
local/cpio 2.10-1 (base)
A tool to copy files into or out of a cpio or tar archive
local/cracklib 2.8.13-2 (base)
Password Checking Library
local/cryptsetup 1.1.0-2 (base)
Userspace setup tool for transparent encryption of block devices using the
Linux 2.6 cryptoapi
local/curl 7.20.0-1
An URL retrival utility and library
local/cyrus-sasl-plugins 2.1.23-1
Cyrus Simple Authentication Service Layer (SASL) library
local/damageproto 1.2.0-1
X11 Damage extension wire protocol
local/dash 0.5.5.1-2 (base)
A POSIX compliant shell that aims to be as small as possible
local/db 4.8.26-1 (base)
The Berkeley DB embedded database system
local/dbus 1.2.20-1
Freedesktop.org message bus system
local/dbus-core 1.2.20-1
Freedesktop.org message bus system
local/dbus-glib 0.82-2
GLib bindings for DBUS
local/dcron 4.4-2 (base)
dillon's lightweight cron daemon
local/desktop-file-utils 0.15-1
Command line utilities for working with desktop entries
local/device-mapper 2.02.60-3 (base)
Device mapper userspace library and tools
local/dhcpcd 5.2.1-1 (base)
RFC2131 compliant DHCP client daemon
local/dialog 1.1_20100119-1 (base)
A tool to display dialog boxes from shell scripts
local/diffutils 2.9-1 (base)
Utility programs used for creating patch files
local/dmidecode 2.10-1
Desktop Management Interface table related utilities
local/dmxproto 2.3-1
X11 Distributed Multihead X extension wire protocol
local/dosfstools 3.0.9-1
DOS filesystem utilities
local/dri2proto 2.1-2
X11 DRI protocol
local/e2fsprogs 1.41.10-1 (base)
Ext2/3/4 filesystem utilities
local/ed 1.4-1 (base-devel)
A POSIX-compliant line editor
local/eggdbus 0.6-1
Experimental D-Bus bindings for GObject
local/eject 2.1.5-4
Eject is a program for ejecting removable media under software control
local/enca 1.13-1
Charset analyser and converter
local/enchant 1.5.0-3
A wrapper library for generic spell checking
local/eventlog 0.2.9-1
A new API to format and send structured log messages
local/exo 0.3.106-1 (xfce4)
Extensions to Xfce by os-cillation
local/expat 2.0.1-5
An XML Parser library written in C
local/faac 1.28-2
FAAC is an AAC audio encoder
local/faad2 2.7-1
ISO AAC audio decoder
local/fakeroot 1.14.4-2 (base-devel)
Gives a fake root environment, useful for building packages as a
non-privileged user
local/farsight2 0.0.17-1
Audio/Video conference software for Instant Messengers
local/ffmpeg 22511-1
Complete and free Internet live audio and video broadcasting solution for
Linux/Unix
local/file 5.04-2 (base)
File type identification utility
local/filesystem 2010.02-4 (base)
Base filesystem
local/findutils 4.4.2-1 (base)
GNU utilities to locate files
local/fixesproto 4.1.1-1
X11 Fixes extension wire protocol
local/flac 1.2.1-2
Free Lossless Audio Codec
local/flashplugin 10.0.45.2-1
Adobe Flash Player
local/flex 2.5.35-3 (base-devel)
A tool for generating text-scanning programs
local/fluidsynth 1.1.1-2
A real-time software synthesizer based on the SoundFont 2 specifications
local/fontcacheproto 0.1.3-1
X11 font cache extension wire protocol
local/fontconfig 2.8.0-1
A library for configuring and customizing font access
local/fontsproto 2.1.0-1
X11 font extension wire protocol
local/freeglut 2.6.0-1
Provides functionality for small OpenGL programs
local/freetype2 2.3.12-1
TrueType font rendering library
local/fribidi 0.19.2-1
A Free Implementation of the Unicode Bidirectional Algorithm
local/frozen-bubble 2.2.0-2
A game in which you throw colorful bubbles and build groups to destroy the
bubbles
local/fuse 2.8.3-1
A library that makes it possible to implement a filesystem in a userspace
program.
local/gamin 0.1.10-1
Gamin is a file and directory monitoring system defined to be a subset of
the FAM (File Alteration Monitor) system.
local/gawk 3.1.7-1 (base)
Gnu version of awk
local/gcc 4.4.3-1 (base-devel)
The GNU Compiler Collection
local/gcc-libs 4.4.3-1 (base)
Runtime libraries shipped by GCC for C and C++ languages
local/gconf 2.28.0-1
A configuration database system
local/gdbm 1.8.3-6 (base)
GNU database library
local/gdk-pixbuf 0.22.0-7
Image loading and manipulation library
local/gen-init-cpio 2.6.32-1 (base)
Program to compress initramfs images
local/gettext 0.17-3 (base)
GNU internationalization library
local/ghostscript 8.71-2
An interpreter for the PostScript language
local/giflib 4.1.6-3
A library for reading and writing gif images
local/git 1.7.0.2-1
the fast distributed version control system
local/gksu 2.0.2-2
A graphical frontend for su
local/glib 1.2.10-8
Common C routines used by Gtk+ and other libs
local/glib2 2.22.4-1
Common C routines used by GTK+ 2.4 and other libs
local/glibc 2.11.1-1 (base)
GNU C Library
local/glibmm 2.22.1-1
Glib-- (glibmm) is a C++ interface for glib
local/gmp 4.3.2-1
A free library for arbitrary precision arithmetic
local/gnome-icon-theme 2.28.0-1 (gnome)
Default icon theme for GNOME2
local/gnome-keyring 2.28.2-1
GNOME Password Management daemon
local/gnutls 2.8.5-1
A library which provides a secure layer over a reliable transport layer
local/google-chrome-dev 5.0.342.3-1
Google Chrome Developer preview channel for Linux
local/gparted 0.5.2-1
A Partition Magic clone, frontend to GNU Parted
local/gpm 1.20.6-5
A mouse server for the console and xterm
local/gqview 2.0.4-3
An image browser and viewer
local/grep 2.5.4-3 (base)
A string search utility
local/groff 1.20.1-4
GNU troff text-formatting system
local/grub 0.97-16 (base)
A GNU multiboot boot loader
local/gsfonts 8.11-5
Ghostscript standard Type1 fonts
local/gstreamer0.10 0.10.28-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.28-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.28-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-python 0.10.18-1
Python bindings for GStreamer 0.10
local/gtk 1.2.10-10
The GTK+ toolkit
local/gtk-aurora-engine 1.5.1-1
gtk-engine: latest member of the clearlooks family
local/gtk-xfce-engine 2.6.0-1 (xfce4)
A port of Xfce engine to GTK+-2.0
local/gtk2 2.18.7-1
The GTK+ Toolkit (v2)
local/gtkmm 2.18.2-1
C++ bindings for gtk2
local/gtkspell 2.0.16-1
GtkSpell provides word-processor-style highlighting and replacement of
misspelled words in a GtkTextView widget
local/gzip 1.4-1 (base)
GNU compression utility
local/hal 0.5.14-2
Hardware Abstraction Layer
local/hal-info 0.20091130-1
Hardware Abstraction Layer information files
local/hdparm 9.27-2 (base)
A shell utility for manipulating Linux IDE drive/driver parameters
local/heimdal 1.3.1-3
Implementation of Kerberos V5 libraries
local/hicolor-icon-theme 0.11-1
Freedesktop.org Hicolor icon theme
local/hsqldb-java 1.8.1.1-1
HSQLDB Java libraries
local/htop 0.8.3-1
Interactive process viewer
local/hunspell 1.2.8-2
Spell checker and morphological analyzer library and program
local/hyphen 2.4-1
library for high quality hyphenation and justification
local/icon-naming-utils 0.8.90-1
Maps the new names of icons for Tango to the legacy names used by the GNOME
and KDE desktops.
local/icu 4.2.1-1
International Components for Unicode library
local/ilmbase 1.0.1-1
IlmThread is a thread abstraction library for use with OpenEXR
local/imagemagick 6.6.0.0-1
An image viewing/manipulation program
local/imlib2 1.4.2-6
Library that does image file loading and saving as well as rendering,
manipulation, arbitrary polygon support
local/initscripts 2010.01-1 (base)
System initialization/bootup scripts
local/inputproto 2.0-1
X11 Input extension wire protocol
local/intel-dri 7.7-1
Mesa DRI drivers for Intel
local/iproute2 2.6.31-1
IP Routing Utilities
local/iptables 1.4.7-1
A Linux kernel packet control tool
local/iputils 20100214-2 (base)
IP Configuration Utilities (and Ping)
local/iso-codes 3.14-1
Lists of the country, language, and currency names
local/jack 0.116.2-1
A low-latency audio server
local/jasper 1.900.1-5
A software-based implementation of the codec specified in the emerging
JPEG-2000 Part-1 standard
local/jfsutils 1.1.14-1 (base)
JFS filesystem utilities
local/json-glib 0.10.0-1
JSON library built on GLib
local/kbd 1.15.1-1 (base)
Keytable files and keyboard utilities
local/kbproto 1.0.4-1
X11 XKB extension wire protocol
local/kernel26 2.6.32.10-1 (base)
The Linux Kernel and modules
local/kernel26-firmware 2.6.32.10-1 (base)
The included firmware files of the Linux Kernel
local/kernel26-headers 2.6.32.10-1
Header files and scripts for building modules for kernel26
local/ladspa 1.13-2
Linux Audio Developer's Simple Plugin API (LADSPA)
local/lame 3.98.3-1
An MP3 encoder and graphical frame analyzer
local/lcms 1.18-3
Lightweight color management development library/engine
local/less 436-1 (base)
A terminal based program for viewing text files
local/libarchive 2.8.3-1
library that can create and read several streaming archive formats
local/libass 0.9.9-1
A portable library for SSA/ASS subtitles rendering
local/libcap 2.19-1
POSIX 1003.1e capabilities
local/libcddb 1.3.2-1
Library that implements the different protocols (CDDBP, HTTP, SMTP) to
access data on a CDDB server (e.g. http://freedb.org).
local/libcdio 0.82-1
GNU Compact Disc Input and Control Library
local/libcroco 0.6.2-1
GNOME CSS2 parsing and manipulation toolkit
local/libcups 1.4.2-3
The CUPS Printing System - client libraries and headers
local/libdaemon 0.14-1
A lightweight C library which eases the writing of UNIX daemons
local/libdatrie 0.2.3-1
Libdatrie is an implementation of double-array structure for representing
trie, as proposed by Junichi Aoe.
local/libdca 0.0.5-2
Free library for decoding DTS Coherent Acoustics streams
local/libdmx 1.1.0-1
X11 Distributed Multihead extension library
local/libdrm 2.4.18-2
Userspace interface to kernel DRM services
local/libdvbpsi 0.1.6-3
MPEG TS and DVB PSI tables library (needed by vlc for streaming)
local/libdvdnav 4.1.3-2
The library for xine-dvdnav plugin.
local/libdvdread 4.1.3-1
libdvdread provides a simple foundation for reading DVD video disks
local/libebml 0.7.8-2
Extensible Binary Meta Language library
local/libevent 1.4.13-1
An event notification library
local/libexif 0.6.19-1
A library to parse an EXIF file and read the data from those tags
local/libfetch 2.30-1 (base)
URL based download library
local/libfontenc 1.0.5-1
X11 font encoding library
local/libgcrypt 1.4.5-1 (base)
a general purpose crypto library based on the code used
local/libgksu 2.0.12-1
gksu authorization library
local/libgl 7.7-1
Mesa 3-D graphics library and DRI software rasterizer
local/libglade 2.6.4-1
Allows you to load glade interface files in a program at runtime
local/libgpg-error 1.7-2 (base)
Support library for libgcrypt
local/libgraphite 2.3.1-1
SILGraphite - a "smart font" rendering engine - the libs and headers
local/libgsf 1.14.16-1
The GNOME Structured File Library is a utility library for reading and
writing structured file formats
local/libgssglue 0.1-2
exports a gssapi interface which calls other random gssapi libraries
local/libgtop 2.28.0-1
A library that read information about processes and the running system
local/libice 1.0.6-1
X11 Inter-Client Exchange library
local/libid3tag 0.15.1b-4
library for id3 tagging
local/libidl2 0.8.13-1
A front-end for CORBA 2.2 IDL and Netscape's XPIDL
local/libidn 1.16-1
Implementation of the Stringprep, Punycode and IDNA specifications
local/libjpeg 8.0.1-1
Library of JPEG support functions
local/libjpeg6 6b-9
Library of JPEG support functions
local/libldap 2.4.21-1
Lightweight Directory Access Protocol (LDAP) client libraries
local/libmad 0.15.1b-4
A high-quality MPEG audio decoder
local/libmatroska 0.8.1-2
Matroska library
local/libmikmod 3.1.12-3
A portable sound library
local/libmng 1.0.10-3
A collection of routines used to create and manipulate MNG format graphics
files
local/libmodplug 0.8.7-1
A MOD playing library
local/libmp4v2 1.9.1-1
MPEG-4 library
local/libmpcdec 1.2.6-2
Musepack decoding library
local/libmpeg2 0.5.1-1
libmpeg2 is a library for decoding MPEG-1 and MPEG-2 video streams.
local/libmspack 0.0.20060920alpha-1
local/libmtp 1.0.2-1
library implementation of the Media Transfer Protocol
local/libmysqlclient 5.1.45-1
MySQL client libraries
local/libnice 0.0.11-1
An implementation of the IETF's draft ICE (for p2p UDP data streams)
local/libnl 1.1-1
Library for applications dealing with netlink sockets
local/libnotify 0.4.5-1.1
Desktop notification library
local/libogg 1.1.4-1
Ogg bitstream and framing library
local/liboil 0.3.17-1
Library of simple functions that are optimized for various CPUs.
local/libpcap 1.0.0-1 (base)
A system-independent interface for user-level packet capture
local/libpciaccess 0.10.9-1
X11 PCI access library
local/libpng 1.4.1-1
A collection of routines used to create PNG format graphics files
local/libpng12 1.2.40-1
A collection of routines used to create PNG format graphics files
local/libproxy 0.2.3-1
A library that provides automatic proxy configuration management
local/libpurple 2.6.6-1
IM library extracted from Pidgin
local/librpcsecgss 0.19-2
Library for RPCSECGSS support
local/librsvg 2.26.0-2
SAX-based renderer for SVG files into a GdkPixbuf
local/libsasl 2.1.23-2
Cyrus Simple Authentication Service Layer (SASL) library
local/libsexy 0.1.11-2
Doing naughty things to good widgets.
local/libshout 2.2.2-3
Library for accessing a shoutcast/icecast server
local/libsigc++2.0 2.2.4.2-1
Libsigc++ implements a full callback system for use in widget libraries - V2
local/libsm 1.1.1-1
X11 Session Management library
local/libsndfile 1.0.21-1
A C library for reading and writing files containing sampled sound
local/libtasn1 2.4-1
The ASN.1 library used in GNUTLS
local/libthai 0.1.14-1
Thai language support routines
local/libtheora 1.1.1-1
An open video codec developed by the Xiph.org
local/libtiff 3.9.2-2
Library for manipulation of TIFF images
local/libtirpc 0.2.1-1
Transport Independent RPC library (SunRPC replacement)
local/libtool 2.2.6b-2 (base-devel)
A generic library support script
local/libusb 0.1.12-4 (base)
Library to enable user space application programs to communicate with USB
devices
local/libv4l 0.6.4-1
Userspace library for Video 4 Linux (1 and 2)
local/libvdpau 0.4-1
Nvidia VDPAU library
local/libvisual 0.4.0-2
Abstraction library that comes between applications and audio visualisation
plugins
local/libvorbis 1.2.3-1
Vorbis codec library
local/libwmf 0.2.8.4-7
A library for reading vector images in Microsoft's native Windows Metafile
Format (WMF).
local/libwnck 2.28.0-1
Window Navigator Construction Kit
local/libwpd 0.8.14-1
library for importing WordPerfect (tm) documents
local/libx11 1.3.3-1
X11 client-side library
local/libx86 1.1-2
Provides an lrmi interface that works on x86, am64 and alpha
local/libxau 1.0.5-1
X11 authorisation library
local/libxaw 1.0.7-1
X11 Athena Widget library
local/libxcb 1.5-1
X11 client-side library
local/libxcomposite 0.4.1-1
X11 Composite extension library
local/libxcursor 1.1.10-1
X cursor management library
local/libxdamage 1.1.2-1
X11 damaged region extension library
local/libxdmcp 1.0.3-1
X11 Display Manager Control Protocol library
local/libxext 1.1.1-1
X11 miscellaneous extensions library
local/libxfce4menu 4.6.1-1 (xfce4)
a freedesktop.org compliant menu implementation for Xfce
local/libxfce4util 4.6.1-1 (xfce4)
Basic utility non-GUI functions for Xfce
local/libxfcegui4 4.6.3-1 (xfce4)
Various gtk widgets for Xfce
local/libxfixes 4.0.4-1
X11 miscellaneous 'fixes' extension library
local/libxfont 1.4.1-1
X11 font rasterisation library
local/libxfontcache 1.0.5-1
X11 font cache library
local/libxft 2.1.14-1
FreeType-based font drawing library for X
local/libxi 1.3-2
X11 Input extension library
local/libxinerama 1.1-1
X11 Xinerama extension library
local/libxkbfile 1.0.6-1
X11 keyboard file manipulation library
local/libxklavier 4.0-1
High-level API for X Keyboard Extension
local/libxml2 2.7.6-2
XML parsing library, version 2
local/libxmu 1.0.5-1
X11 miscellaneous micro-utility library
local/libxpm 3.5.8-1
X11 pixmap library
local/libxrandr 1.3.0-1
X11 RandR extension library
local/libxrender 0.9.5-1
X Rendering Extension client library
local/libxres 1.0.4-1
X11 Resource extension library
local/libxslt 1.1.26-1
XML stylesheet transformation library
local/libxss 1.2.0-1
X11 Screen Saver extension library
local/libxt 1.0.7-1
X11 toolkit intrinsics library
local/libxtst 1.1.0-1
X11 Testing -- Resource extension library
local/libxv 1.0.5-1
X11 Video extension library
local/libxvmc 1.0.5-1
X11 Video Motion Compensation extension library
local/libxxf86dga 1.1.1-1
X11 Direct Graphics Access extension library
local/libxxf86misc 1.0.2-1
X11 XFree86 miscellaneous extension library
local/libxxf86vm 1.1.0-1
X11 XFree86 video mode extension library
local/licenses 2.5-1 (base)
The standard licenses distribution package
local/links 2.2-3
A text WWW browser, similar to Lynx
local/linux-api-headers 2.6.32.5-2 (base)
Kernel headers sanitized for use in userspace
local/linux-atm 2.5.0-1
Drivers and tools to support ATM networking under Linux.
local/logrotate 3.7.8-1 (base)
Rotates system logs automatically
local/lpsolve 5.5.0.15-1
a Mixed Integer Linear Programming (MILP) solver
local/lua 5.1.4-4
A powerful light-weight programming language designed for extending
applications.
local/lucene 2.9.2-1
A high-performance, full-featured text search engine library written
entirely in Java
local/lvm2 2.02.60-3 (base)
Logical Volume Manager 2 utilities
local/lzo2 2.03-1 (base)
Portable lossless data compression library written in ANSI C
local/m4 1.4.14-1 (base-devel)
m4 macro processor
local/mach64-dri 7.7-1
Mesa DRI drivers for ATI Mach64
local/madwifi 0.9.4.4100-2
Madwifi drivers for Atheros wireless chipsets. For stock arch 2.6 kernel
local/madwifi-utils 0.9.4.4096-1
Userspace tools of madwifi drivers for Atheros wireless chipsets.
local/mailx 8.1.1-7 (base)
A commandline utility for sending email
local/make 3.81-4 (base-devel)
GNU make utility to maintain groups of programs
local/man-db 2.5.7-1 (base)
A utility for reading man pages
local/man-pages 3.24-1 (base)
Linux man pages
local/mcpp 2.7.2-2
Matsui's CPP implementation precisely conformed to standards
local/mdadm 3.1.1-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as
Software RAID
local/meliae-svg-icon-theme 1.2-1
Here you are version n. 1.1 of the new Meliae Icon Theme (all icons are in
SVG format).
local/mesa 7.7-1
Mesa 3-D graphics libraries and include files
local/mga-dri 7.7-1
Mesa DRI drivers for Matrox
local/mkinitcpio 0.6.3-1 (base)
Modular initramfs image creation utility
local/mkinitcpio-busybox 1.15.3-5
base initramfs tools
local/mlocate 0.22.3-1
Faster merging drop-in for slocate
local/mobile-broadband-provider-info 0.20100301-1
Network Management daemon
local/module-init-tools 3.11.1-2 (base)
utilities needed by Linux systems for managing loadable kernel modules
local/mousepad 0.2.16-2 (xfce4)
Simple Text Editor for Xfce4 (based on Gedit)
local/mozilla-common 1.4-1
Common Initialization Profile for Mozilla.org products
local/mpfr 2.4.2-1
multiple-precision floating-point library
local/ms-sys 2.1.4-2
A tool to write Win9x/2k/XP/2k3/Vista/7/2k8 master boot records (mbr) under
linux - RTM!
local/mtools 4.0.13-1
A collection of utilities to access MS-DOS disks
local/nano 2.2.3-1 (base)
Pico editor clone with enhancements
local/ncurses 5.7-2 (base)
System V Release 4.0 curses emulation library
local/ndiswrapper 1.56-1
Module for NDIS (Windows Network Drivers) drivers supplied by vendors. For
stock arch 2.6 kernel.
local/ndiswrapper-utils 1.56-1
Binaries for ndiswrapper module
local/neon 0.28.6-2
HTTP and WebDAV client library with a C interface
local/net-tools 1.60-14 (base)
Configuration tools for Linux networking
local/network-manager-applet 0.8-2
GNOME frontends to NetWorkmanager
local/networkmanager 0.8-1
Network Management daemon
local/nfs-utils 1.2.2-1
Support programs for Network File Systems
local/nfsidmap 0.23-3
Library to help mapping IDs, mainly for NFSv4
local/notification-daemon 0.4.0-4 (gnome)
Notification daemon for the desktop notifications framework
local/nspr 4.8.3-1
Netscape Portable Runtime
local/nss 3.12.4-2
Mozilla Network Security Services
local/ntfs-3g 2010.1.16-1
Stable read and write NTFS driver
local/ntfsprogs 2.0.0-4
NTFS filesystem utilities
local/opencore-amr 0.1.2-1
Open source implementation of the Adaptive Multi Rate (AMR) speech codec
local/openexr 1.6.1-1
openexr library for EXR images
local/openjdk6 6.b17_1.7.1-1
Free Java environment based on OpenJDK 6.0 with IcedTea6 replacing binary
plugs.
local/openntpd 3.9p1-10
Free, easy to use implementation of the Network Time Protocol.
local/openoffice-base 3.2.0-1
OpenOffice.org - a free multiplatform and multilingual office suite -
testing branch leeding to next stable release
local/openssh 5.3p1-4
A Secure SHell server/client
local/openssl 0.9.8m-2
The Open Source toolkit for Secure Sockets Layer and Transport Layer
Security
local/ophcrack 3.3.1-4
A free Windows password cracker based on rainbow tables
local/orage 4.6.1-1 (xfce4)
A simple calendar application with reminders for Xfce
local/orbit2 2.14.17-1
Thin/fast CORBA ORB
local/pacman 3.3.3-1 (base)
A library-based package manager with dependency support
local/pacman-color 3.3.3-1
Command-line frontend for libalpm aka pacman with color patch
local/pacman-mirrorlist 20100131-1 (base)
Arch Linux mirror list for use by pacman
local/pam 1.1.1-1 (base)
PAM (Pluggable Authentication Modules) library
local/pango 1.26.2-1
A library for layout and rendering of text
local/pangomm 2.26.0-1
C++ bindings for pango
local/parted 2.2-1
A program for creating, destroying, resizing, checking and copying
partitions
local/patch 2.6.1-1 (base-devel)
A utility to apply patch files to original sources
local/pciutils 3.1.7-1 (base)
PCI bus configuration space access library and tools
local/pcmciautils 016-1 (base)
Utilities for inserting and removing PCMCIA cards
local/pcre 8.01-1 (base)
A library that implements Perl 5-style regular expressions
local/perl 5.10.1-5 (base)
Practical Extraction and Report Language
local/perl-error 0.17016-1
Perl/CPAN Error module - Error/exception handling in an OO-ish way
local/perl-locale-gettext 1.05-5
Permits access from Perl to the gettext() family of functions.
local/perl-xml-simple 2.18-2
Simple XML parser for perl
local/perlxml 2.36-2
XML::Parser - an XML parser module for perl
local/pidgin 2.6.6-1
Multi-protocol instant messaging client
local/pidgin-facebookchat 1.64-1
Facebook chat plugin for Pidgin and libpurple messengers.
local/pixman 0.16.6-1
Pixman library
local/pkgconfig 0.23-1 (base-devel)
A system for managing library compile/link flags
local/pkgtools 17-1
A collection of scripts for Arch Linux packages
local/pm-utils 1.2.6.1-4
Utilities and scripts for suspend and hibernate power management
local/polkit 0.96-2
Application development toolkit for controlling system-wide privileges
local/polkit-gnome 0.96-3
PolicyKit integration for the GNOME desktop
local/popt 1.15-1 (base)
A commandline option parser
local/postgresql-libs 8.4.2-4
Libraries for use with PostgreSQL
local/ppl 0.10.2-2
A modern library for convex polyhedra and other numerical abstractions.
local/ppp 2.4.5-1 (base)
A daemon which implements the PPP protocol for dial-up networking
local/preload 0.6.4-2
Makes applications run faster by prefetching binaries and shared objects
local/procinfo 19-3 (base)
Displays useful information from /proc
local/procps 3.2.8-1 (base)
Utilities for monitoring your system and processes on your system
local/psmisc 22.10-1 (base)
Miscellaneous procfs tools
local/psutils 1.17-2
A set of postscript utilities
local/pycairo 1.8.8-1
Python bindings for the cairo graphics library
local/pygobject 2.20.0-1
Python bindings for GObject
local/pygtk 2.16.0-2
Python bindings for the GTK widget set
local/python 2.6.5-1
A high-level scripting language
local/python-mpd 0.2.1-2
Python MPD client library
local/qt 4.6.2-1
A cross-platform application and UI framework
local/qwt 5.2.0-2
Qt Widgets for Technical Applications
local/r128-dri 7.7-1
Mesa DRI drivers for ATI Rage128
local/randrproto 1.3.1-1
X11 RandR extension wire protocol
local/raptor 1.4.21-1
A C library that parses RDF/XML/N-Triples into RDF triples
local/rasqal 0.9.19-1
a free C library that handles Resource Description Framework (RDF) query
syntaxes, query construction and query execution returning result bindings
local/readline 6.1.002-1
GNU readline library
local/recode 3.6-3
Converts files between various character sets and usages
local/recordproto 1.14-1
X11 Record extension wire protocol
local/redland 1.0.10-2
Library that provides a high-level interface to RDF data
local/reiserfsprogs 3.6.21-2 (base)
Reiserfs utilities
local/renderproto 0.11-1
X11 Render extension wire protocol
local/rp-pppoe 3.10-4 (base)
Roaring Penguin's Point-to-Point Protocol over Ethernet client
local/rpcbind 0.2.0-1
portmap replacement which supports RPC over various protocols
local/run-parts 3.2.2-1
run scripts or programs in a directory
local/savage-dri 7.7-1
Mesa DRI drivers for S3 Sraphics/VIA Savage
local/saxon 9.2.0.6-1
XSLT 2.0 / XPath 2.0 / XQuery 1.0 processor for Java - the open source Home
Edition
local/scrnsaverproto 1.2.0-1
X11 Screen Saver extension wire protocol
local/sdl 1.2.14-1
A library for portable low-level access to a video framebuffer, audio
output, mouse, and keyboard
local/sdl_gfx 2.0.20-1
SDL Graphic Primitives
local/sdl_image 1.2.10-2
A simple library to load images of various formats as SDL surfaces
local/sdl_mixer 1.2.11-2
A simple multi-channel audio mixer
local/sdl_net 1.2.7-3
A small sample cross-platform networking library
local/sdl_pango 0.1.2-2
Pango SDL binding
local/sdl_perl 2.2.6-3
A Perl wrapper for SDL
local/sdl_ttf 2.0.9-2
A library that allows you to use TrueType fonts in your SDL applications
local/sdparm 1.04-1 (base)
An utility similar to hdparm but for SCSI devices
local/sed 4.2.1-1 (base)
GNU stream editor
local/shadow 4.1.4.2-2 (base)
Shadow password file utilities
local/shared-mime-info 0.71-1
Freedesktop.org Shared MIME Info
local/silc-toolkit 1.1.10-1
Toolkit for Secure Internet Live Conferencing
local/sis-dri 7.7-1
Mesa DRI drivers for SiS
local/smbclient 3.5.1-1
Tools to access a server's filespace and printers via SMB
local/smpeg 0.4.4-5
SDL MPEG Player Library
local/sonata 1.6.2.1-1
Elegant GTK+ music client for MPD
local/speex 1.2rc1-1.1
A free codec for free speech
local/sqlite3 3.6.22-1
A C library that implements an SQL database engine
local/squeeze 0.2.3-2 (xfce4)
Squeeze is a modern and advanced archive manager for the Xfce Desktop
Environment.
local/startup-notification 0.10-1
Monitor and display application startup
local/sudo 1.7.2p5-1
Give certain users the ability to run some commands as root
local/sysfsutils 2.1.0-5 (base)
System Utilities Based on Sysfs
local/syslog-ng 3.0.4-3 (base)
Next-generation syslogd with advanced networking and filtering capabilities
local/sysvinit 2.86-5 (base)
Linux System V Init
local/taglib 1.6.1-1
library for reading and editing the meta-data of several popular audio
formats.
local/talloc 2.0.1-1
talloc is a hierarchical pool based memory allocator with destructors
local/tar 1.23-1 (base)
Utility used to store, backup, and transport files
local/tcp_wrappers 7.6-11 (base)
Monitors and Controls incoming TCP connections
local/tdb 1.2.1-1
A Trivia Database similar to GDBM but allows simultaneous commits
local/tdfx-dri 7.7-1
Mesa DRI drivers for 3dfx
local/terminal 0.4.4-1 (xfce4)
A modern terminal emulator primarly for the Xfce desktop environment
local/texinfo 4.13a-3 (base)
Utilities to work with and produce manuals, ASCII text, and on-line
documentation from a single source file
local/thunar 1.0.1-5 (xfce4)
new modern file manager for Xfce
local/ttf-dejavu 2.30-2
Font family based on the Bitstream Vera Fonts with a wider range of
characters
local/ttf-freefont 20090104-2
A set of free high-quality TrueType fonts covering the UCS character set
local/ttf-ms-fonts 2.0-2
Core TTF Fonts from Microsoft
local/ttf-vista-fonts 1-3
Microsoft Vista True Type Fonts
local/tzdata 2010e-1
Sources for time zone and daylight saving time data
local/udev 151-3 (base)
The userspace dev tools (udev)
local/unixodbc 2.2.14-2
ODBC is an open specification for providing application developers with a
predictable API with which to access Data Sources
local/unzip 6.0-5
Unpacks .zip archives such as those made by PKZIP
local/usbutils 0.86-2 (base)
USB Device Utilities
local/util-linux-ng 2.17.1-1 (base)
Miscellaneous system utilities for Linux
local/vbetool 1.1-1
vbetool uses lrmi in order to run code from the video BIOS
local/vi 050325-3 (base)
The original ex/vi text editor.
local/videoproto 2.3.0-1
X11 Video extension wire protocol
local/vigra 1.6.0-2
Computer vision library
local/vim 7.2.385-1
Vi Improved, a highly configurable, improved version of the vi text editor
local/virtualbox_bin 3.1.4-3
Powerful x86 virtualization (Personal Use Binaries Edition).
local/vlc 1.0.5-5
A multi-platform MPEG, VCD/DVD, and DivX player
local/vte 0.22.5-1
Virtual Terminal Emulator library
local/wget 1.12-1 (base)
A network utility to retrieve files from the Web
local/which 2.20-2 (base)
A utility to show the full path of commands
local/wine 1.1.41-1
A compatibility layer for running Windows programs
local/wireless_tools 29-3
Wireless Tools
local/wpa_supplicant 0.6.10-1 (base)
A utility providing key negotiation for WPA wireless networks
local/x264 20100312-1
free library for encoding H264/AVC video streams
local/xbitmaps 1.1.0-1
X.org Bitmap files
local/xcb-proto 1.6-1
XML-XCB protocol descriptions
local/xcb-util 0.3.6-1
Utility libraries for XC Binding
local/xchat 2.8.6-5
A GTK+ based IRC client
local/xcursor-themes 1.0.2-1
X.org Cursor themes
local/xcursor-vanilla-dmz-aa 0.4-5
Vanilla DMZ AA cursor theme
local/xdg-utils 1.0.2.20100303-1
Command line tools that assist applications with a variety of desktop
integration tasks.
local/xextproto 7.1.1-1
X11 various extension wire protocol
local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
local/xf86-video-apm 1.2.2-2 (xorg-video-drivers)
X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.2-1 (xorg-video-drivers)
X.org ark video driver
local/xf86-video-ati 6.12.4-3 (xorg-video-drivers)
X.org ati video driver
local/xf86-video-chips 1.2.2-2 (xorg-video-drivers)
X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-2 (xorg-video-drivers)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.2-2 (xorg-video-drivers)
X.org dummy video driver
local/xf86-video-fbdev 0.4.1-2 (xorg-video-drivers)
X.org framebuffer video driver
local/xf86-video-geode 2.11.6-1 (xorg-video-drivers)
X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.4-2 (xorg-video-drivers)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.3-2 (xorg-video-drivers)
X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-2 (xorg-video-drivers)
X.org Intel i740 video driver
local/xf86-video-intel 2.10.0-1 (xorg-video-drivers)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.8.2-2 (xorg-video-drivers)
X.org mach64 video driver
local/xf86-video-mga 1.4.11-2 (xorg-video-drivers)
X.org mga video driver
local/xf86-video-neomagic 1.2.4-3 (xorg-video-drivers)
X.org neomagic video driver
local/xf86-video-nv 2.1.17-1 (xorg-video-drivers)
X.org nv video driver
local/xf86-video-r128 6.8.1-2 (xorg-video-drivers)
X.org ati Rage128 video driver
local/xf86-video-radeonhd 1.3.0-1 (xorg-video-drivers)
Experimental Radeon HD video driver for r500 and r600 ATI cards
local/xf86-video-rendition 4.2.3-1 (xorg-video-drivers)
X.org Rendition video driver
local/xf86-video-s3 0.6.3-1 (xorg-video-drivers)
X.org S3 video driver
local/xf86-video-s3virge 1.10.3-1 (xorg-video-drivers)
X.org S3 Virge video driver
local/xf86-video-savage 2.3.1-2 (xorg-video-drivers)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.3-2 (xorg-video-drivers)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.2-3 (xorg-video-drivers)
X.org SiS video driver
local/xf86-video-sisusb 0.9.3-1 (xorg-video-drivers)
X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-2 (xorg-video-drivers)
X.org tdfx video driver
local/xf86-video-trident 1.3.3-3 (xorg-video-drivers)
X.org Trident video driver
local/xf86-video-tseng 1.2.3-1 (xorg-video-drivers)
X.org tseng video driver
local/xf86-video-v4l 0.2.0-4 (xorg-video-drivers)
X.org v4l video driver
local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
X.org vesa video driver
local/xf86-video-vmware 10.16.9-1 (xorg-video-drivers)
X.org vmware video driver
local/xf86-video-voodoo 1.2.3-1 (xorg-video-drivers)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86dgaproto 2.1-1
X11 Direct Graphics Access extension wire protocol
local/xf86miscproto 0.9.3-1
X11 XFree86-Miscellaneous extension wire protocol
local/xf86vidmodeproto 2.3-1
X11 Video Mode extension wire protocol
local/xfce-utils 4.6.1-2 (xfce4)
Utilities for Xfce
local/xfce4-appfinder 4.6.1-2 (xfce4)
Xfce application finder
local/xfce4-battery-plugin 0.5.1-2 (xfce4-goodies)
A battery monitor plugin for the Xfce panel
local/xfce4-diskperf-plugin 2.1.0-5 (xfce4-goodies)
Plugin for the Xfce4 panel displaying instant disk/partition performance
local/xfce4-icon-theme 4.4.3-1 (xfce4)
A set of icon themes for the Xfce window manager
local/xfce4-mixer 4.6.1-1 (xfce4)
The volume control plugin for the Xfce panel
local/xfce4-panel 4.6.3-1 (xfce4)
Panel for the Xfce desktop environment
local/xfce4-session 4.6.1-1 (xfce4)
A session manager for Xfce
local/xfce4-settings 4.6.4-1 (xfce4)
Settings manager for xfce
local/xfconf 4.6.1-3 (xfce4)
xfconf.. thingie
local/xfdesktop 4.6.1-1 (xfce4)
A desktop manager for Xfce
local/xfprint 4.6.1-2 (xfce4)
A print dialog and a printer manager for Xfce
local/xfsprogs 3.1.1-1 (base)
XFS filesystem utilities
local/xfwm4 4.6.1-1 (xfce4)
Xfce window manager, compatible with Gnome, Gnome2, KDE2, and KDE3
local/xfwm4-themes 4.6.0-1 (xfce4)
A set of additionnal themes for the Xfce window manager
local/xineramaproto 1.2-1
X11 Xinerama extension wire protocol
local/xkeyboard-config 1.8-1
X keyboard configuration files
local/xorg-apps 7.5-3
Various X.Org applications
local/xorg-docs 1.5-1 (xorg)
X.org documentations
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-100dpi 1.0.1-3 (xorg)
X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-3 (xorg)
X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.1-1
X.org misc fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.5.902-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.6-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.2.0-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-2
X.org keyboard utilities
local/xproto 7.0.16-1
X11 core wire protocol and auxiliary headers
local/xsel 1.2.0-1
XSel is a command-line program for getting and setting the contents of the X
selection
local/xterm 255-1 (xorg)
X Terminal Emulator
local/xvidcore 1.2.2-1
XviD is an open source MPEG-4 video codec
local/xz-utils 4.999.9beta-2
utils for managing LZMA and XZ compressed files
local/yaourt-git 20100319-1
A pacman wrapper with extended features and AUR support
local/zd1211-firmware 1.4-3
Firmware for the in-kernel26 zd1211rw wireless driver
local/zlib 1.2.4-1
Compression library implementing the deflate compression method found in
gzip and PKZIP
local/zvbi 0.2.33-2
VBI capture and decoding library
Output of lsmod
Module Size Used by
nls_cp437 4513 1
vfat 8348 1
fat 43888 1 vfat
ipv6 237596 22
snd_hda_codec_analog 51443 1
i915 267595 2
drm_kms_helper 21971 1 i915
i2c_i801 7122 0
drm 126556 3 i915,drm_kms_helper
i2c_algo_bit 4219 1 i915
ndiswrapper 172796 0
usbhid 33579 0
hid 61085 1 usbhid
i2c_core 15369 4 i915,i2c_i801,drm,i2c_algo_bit
iTCO_wdt 7577 0
ppdev 4882 0
lp 6616 0
video 14871 1 i915
e1000e 112803 0
ide_pci_generic 2008 0
button 3638 1 i915
iTCO_vendor_support 1453 1 iTCO_wdt
output 1404 1 video
ide_core 76951 1 ide_pci_generic
intel_agp 23225 1
agpgart 23331 2 drm,intel_agp
processor 26526 2
dcdbas 4440 0
thermal 9326 0
sg 21079 0
psmouse 56309 0
serio_raw 3620 0
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 18985 0
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_codec 56728 2 snd_hda_codec_analog,snd_hda_intel
parport_pc 27680 1
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57351 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
parport 26575 3 ppdev,lp,parport_pc
snd_timer 16117 2 snd_seq,snd_pcm
pcspkr 1347 0
evdev 6970 8
snd 43847 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
loop 11399 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext2 56463 1
mbcache 4278 1 ext2
sr_mod 13161 0
cdrom 31625 1 sr_mod
sd_mod 24101 3
usb_storage 34006 2
pata_acpi 2264 0
ata_generic 2235 0
ata_piix 17725 0
uhci_hcd 19156 0
libata 135579 3 pata_acpi,ata_generic,ata_piix
scsi_mod 78933 5 sg,sr_mod,sd_mod,usb_storage,libata
ehci_hcd 31594 0
usbcore 118921 6 ndiswrapper,usbhid,usb_storage,uhci_hcd,ehci_hcd -
Very strange: can not enable root.
One of my old G4 behaves very strange, unless everything is running very well, I can't log in as root.
Also after enabling root in NetInfo manager, I can't login as root, neither as user nor using SSH.
I resetted the Pasword using the Install-DVD. But still no effect.
Finally i deleted the root account using NetInfoManager and deleted the root home dirctory /private/var/root.
So I was able to activate root in NIM again, restarted the local NetInfo-Domain and again: nothing.
It is complete impossible to log into this machine as root. But I have to.
Making a complete new install on this mac will cost me at least one day, so this is not an option.
Workin since ever with lots of macs, I never faced such a strange thing. Please help!Should the features and access you require not work in 10.4.11, you may have to
consider installing a new system folder and update that; if the issue really is one
of some unusual happening and the superuser or root user is inaccessible.
Are you sure you really need root user access? There are other ways to do stuff.
You appear to have already tried the basic steps to gain root level access:
"Enabling the Root User" - an Apple Help 10.4 support document:
- http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1549.html
This thread really does show more than one way to handle the issue...
"How do I enable root user? - 10.5.x"
{includes a 'command line editor" discussion - and other detailed options}
- http://discussions.apple.com/thread.jspa?threadID=1910434&tstart=0
There may also be some helpful access to command line and other
super user or unix baseline methods in the OnyX utility from Titanium
Software, the free-running user interface utility. I've seen this section
in there but have no need presently to experiment with it.
In any event, see if the second link above is helpful; it may be.
Good luck & happy computing! -
Very strange problem. Missing characters in QT applications
Hello all.
I'm trying to deal with a very strange issue since some time, that is driving me crazy, because I have no clue where the problem may lay:
In my Archlinux system, some, and only some QT applications (for example Skype, or Qtconfig) don't display properly certain characters in the unicode set (for example "ń" or "ł") when I use certain fonts (for example Terminus, Clean or Verdana), and those applications substitute those characters with the corresponding ones from the Bitstream Vera Sans font type.
So, when I write, say, the Polish word "Toruń", the four first letters (T, o, r and u) are rendereed in the desired font type (let's say Terminus). However, the last letter (ń) is rendered in Bitstream Vera Sans, thus making the writing appear really ugly and uneven.
However, this doesn't happen in Opera (the browser), which is a QT application, but where I get the whole unicode character set displayed properly in the desired font type (Terminus in this example).
Also, this doesn't happen in the rest of non-QT applications I have in my system: all of them render perfectly the whole unicode set of characters in the desired font type, no matter which.
But! it's not a problem of those QT applications, because I have another partition with Ubuntu installed, and when I boot that partition I don't have this problem: all applications, including Skype and Qtconfig, display correctly all characters in the whole unicode set, no matter which font type I'm using.
This is totally bewildering me.
Any clue?
Thank you.The problem is not only in qt applications. I run openbox and this is the output I get when using the command-line script pdfmerge to merge pdf files:
GPL Ghostscript 8.71: Missing glyph CID=48, glyph=0030 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=49, glyph=0031 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=31, glyph=001f in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=38, glyph=0026 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=37, glyph=0025 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=34, glyph=0022 in the font VerdanaItalic . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=54, glyph=0036 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=44, glyph=002c in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=50, glyph=0032 in the font VerdanaBold . The output PDF may fail with some viewers.
GPL Ghostscript 8.71: Missing glyph CID=77, glyph=004d in the font Verdana . The output PDF may fail with some viewers.
There are visible errors in the pdf output. For example, bold "C" is replaced by a square box, bold "b" is replaced by a space.
It looks like there's bug in the Verdana font or perhaps in Ghostscript 8.71 -
Very strange error : IDOC to jdbc scenario
Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE. -
Very strange error in text properties - AI CS6
Hello Everyone,
This morning I found very very STRANGE error in Adobe CS6 about text properties. Here you go.
In the picture one text 'ei and mosterd' was bold.
But after copy to new string the bold characters are changed to 'ig and mosterdz'.
This is very strange error I have seen ever.
Do you guys have any reason why CS6 act like this?
also do you have any option to fix this issue?
For your information:
I just done copy past. Nothing else.
All the properties are same for both.
No difference except the text string size
I tried the same file in different machines for check. But I still see the same error in all the machines.
System properties:
Mac os x: 10.8.5
Processor 2,8 Ghz Intel Core i5
Memory: 8 GB
Software: Adobe CS6
Regards,
FroQWow, this is absolutely incredible... you try to parse an empty String to an int and it throws an exception... I'd never have thought.
Maybe you are looking for
-
Is there a way to remove one or more words in the dictionary list of auto-completion?
Is there a way to remove one or more words from the dictionary list of auto-completion?
-
After Effects Color Grading Problem
I have imported some footage (about 3 minutes worth) into a single composition in After Effects in order to color correct with Color Finesse. Without even having loaded the plugin (or ANY plugins), the video plays at between 14 and 20 fps with the fo
-
I have a custom list called "Suggestions" with a field called 'Notes from Reveiwer'. Folks enter a new suggestion and kicks off a workflow to approvers. Approvers review the suggestions and add notes. When notes are added, I would like to have the
-
Today we came to know that system not generating the credit memo billing doc # & accounting doc # for those credit memo order raised on 24th march. approx 42 credit memo order raised. Actually once the credit memo order created in the system w.r.t or
-
Problem during uploading of Adobe form
when trying to upload a (editable)interactive PDF form using Adobe PDF interactive forms,an unknown error is occuring. see the sample code, its giving an error in ADS(Adobe Document Services)calling.... *lv_filename = p_pdf. CL_GUI_FRONTEND_SERVICES