Very Strange Logic Studio Installing Problem, please help !

Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lot

it is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010

Similar Messages

Very strange behaviour master-detail-detail please help

Very strange behaviour master-detail-detail please help
Hello,
I have a parent-child-grandchild report which show's some really strange behaviour.
The data template has 3 queries Q1, Q2 and Q3.
Q2 is bound to Q1 using a bind variable
Q3 is bound to Q2 using another bind variable
For a certain record in Q1 the output should be
2 records in Q2
and 1 record in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q2 record B
Q3 record BC
The results conforms to the expected output.
For another record in Q1 the output should be
2 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record AB
For another record in Q1 the output should be
5 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record EI
Q3 record EJ
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record DH
So for the last record of Q2 I don't get the appropriate records from Q3 when there are multiple records to be shown, but only the last record which belongs to the previous Q2
What is going on?
Please help me out...
Kind regards,
Jan-Marcel

Hi Tim,
Thanks for your reply. Below you will find the datatemplate on the scott/tiger schema.
Please help me out.
Kind regards,
Jan-Marcel
<dataTemplate name="scott" description="Template scott" dataSourceRef="otcy001" version="1.1">
<parameters>
    <parameter name="p_deptno" dataType="number"/>
</parameters>
<dataQuery>
    <sqlStatement name="Q1">
      <![CDATA[
        select empno            mgr_empno
             , ename            mgr_name
             , job              mgr_job
             , hiredate         mgr_hiredate
             , sal              mgr_sal
             , comm             mgr_comm
          from emp
         where deptno = nvl(:p_deptno, deptno)
           and mgr is null
      ]]>
    </sqlStatement>
    <sqlStatement name="Q2">
      <![CDATA[
        select empno            mgr2_empno
             , ename            mgr2_name
             , job              mgr2_job
             , hiredate         mgr2_hiredate
             , sal              mgr2_sal
             , comm             mgr2_comm
             , mgr              mgr2_mgr
          from emp
         where mgr = :mgr_empno
      ]]>
    </sqlStatement>
    <sqlStatement name="Q3">
      <![CDATA[
        select empno            emp_no
             , ename            emp_name
             , job              emp_job
             , hiredate         emp_hiredate
             , sal              emp_sal
             , comm             emp_comm
             , mgr              emp_mgr
          from emp
         where mgr = :mgr2_empno
      ]]>
    </sqlStatement>
</dataQuery>
<dataStructure>
    <group name="G_mgr1" source="Q1">
      <element name="q1_mgr_empno"    value="mgr_empno"/>
      <element name="q1_mgr_name"     value="mgr_name"/>
      <element name="q1_mgr_job"      value="mgr_job"/>
      <element name="q1_mgr_hiredate" value="mgr_hiredate"/>
      <element name="q1_mgr_sal"      value="mgr_sal"/>
      <element name="q1_mgr_comm"     value="mgr_comm"/>
      <group name="G_mgr2" source="Q2">
        <element name="q2_mgr_empno"    value="mgr2_empno"/>
        <element name="q2_mgr_name"     value="mgr2_name"/>
        <element name="q2_mgr_job"      value="mgr2_job"/>
        <element name="q2_mgr_hiredate" value="mgr2_hiredate"/>
        <element name="q2_mgr_sal"      value="mgr2_sal"/>
        <element name="q2_mgr_comm"     value="mgr2_comm"/>
        <element name="q2_mgr2_mgr"     value="mgr2_mgr"/>
        <group name="G_emp" source="Q3">
          <element name="q3_emp_empno"    value="emp_empno"/>
          <element name="q3_emp_name"     value="emp_name"/>
          <element name="q3_emp_job"      value="emp_job"/>
          <element name="q3_emp_hiredate" value="emp_hiredate"/>
          <element name="q3_emp_sal"      value="emp_sal"/>
          <element name="q3_emp_comm"     value="emp_comm"/>
          <element name="q3_emp_mgr"      value="emp_mgr"/>
        </group>
      </group>
    </group>
</dataStructure>
</dataTemplate>

Logic start up problems please help

Recently every time for no apparent reason at all when Logic 7.1.1 launches I seem to always get a Error code saying 'Error Code 1 was returned by Coreaudio.
I have downloaded the latest RME drivers for my Multiface version 1 but still i get the same problem.
I must say that once I click on the error continue button Logic opens as normal and I can proceed to have a good session with out any crashes.
I have also reinstalled logic a few times and trashed my prefs and caches but it still doesn't seem to matter.
if anyone can help please as I find it as very annoying

Hi,
Maybe you installed a new plug-in recently? I've gotten this message before when a plug-in is not quite compatible.
Cheers

Logic Studio Install Problems

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Can't get passed this install problem - Please help Adobe.

I've downloaded the TRIAL version of PRODUCTION PREMIUM CS6. Once running / installed and tested it I will purchase it.
But cannot get past this ERROR problem.
Here is my install ERROR log ADOBE.. Please help.
URGENT.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir6Qpuljrb/Assets1/Application/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" to "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" (Seq 1205)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1205)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure

You can try resolving your issue using following document :
http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
and
http://helpx.adobe.com/creative-suite/kb/error-unable-copy-file-tmp.html
Regards,
Sharath Holla.

Access Virus KC, Logic Studio & ARP Sync - Please help!!

Can someone please help out here.
Im using an Access Virus KC, via an external midi channel in Logic, connect to an AMT8.
When the I play an ARP patch iv created through the midi channel in logic, the ARP pattern doesn't play back. All I get is the single note and sometimes 3 notes of the pattern????
Similarly, when I have the external midi track selected in the arrange page, when I play the keys on the virus, I get the same problem. However if I move the selected track in logic to an audio channel, I can strike the keys on the access and hear the arp play back perfectly.
This may be a simple issue, however I cant seem to figure out what the problem is here.
All advice appreciated.

To help figure out where the problem is,
open both your reference movie and one of your bounced audio tracks in Quicktime pro, with the audio track in front. Hit ⌘⏎. If they play in sync, the problem is happening when you re-import into FCP. If out of sync, the problem is in Logic.
Also, the sync issue - is the audio or video playing slow, and how quickly does it fall out?

Very Very Urgent...Printing problem please help me.....

Hi there,
Today, i struggled with one printing problem. can anybody help me please!. We are preparing reports using reports 10g. I created a report with orientatin of Landscape and Paper size is 11.5*8.5 that is A4 size and right margin 0.2 left margin with 0.2 and top and bottom margins with 0.5.Report output is correctly coming in report builder runtime. Now the actual problem is, this report must linked to one server for example http://xx.xx.xxxx.main.html.we linked the report generated by me to this link.
when i run the report using this weblink, report is displayed in htmlcss(i opted) perfectly,now user can take the printout of this report by clicking print from file menu. The actual problem i faced is when i run this report in html link report is correctly displaying but paper size is letter and page margin are right 0.75 and left 0.75 defualtly. When i print the report with these setings date is truncating when user takes printout in html. User don't know the page margins i.e right o.2 both left and right (actually in report builder). So he cant adjust it correctly in file menu pagesetup in html page.He simply click print and it should come as with report builder margin settings. To solve this i change the default preferences in control panel ---printers, but no use. Is it possible to pass margins both right,left and top bottom margins as runtimeparameters in url of the this report. Is there any alternative way.
Please do reply urgent, becoz since this is my clients urgent requirement,help me
Thanks and regards
thanx in advance.
Jeevan

Hi,
Though HTMLCSS pages are created using the same page margins that you specify in the report definition, the problem may become more clear to you if you try to create PDF files instead of HTMLCSS. Set DESFORMAT=pdf, and see the output PDF file in Acrobat Reader. Do you see the margins that you want, or is the problem still the same? If you don't see the correct margins even in the PDF file, it probably means you need to modify your report definition to get the margins you want.
In case you see the correct margin in PDF output, it means that your report design is fine. The problem is with printing. In that case, I think what other people have suggested you is true - probably the printable area for your particular printer is less than what you want.
I'm afraid I may not be the best person to specify the printer or OS settings. Please consult your printer vendor.
The other option may be to get output in PDF format, and print PDF files.
Navneet.

TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

Hello,
I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
So, I can't actually even attempt to install with no destination.
any help would be most appreciated.
thankyou

suzannah-a:
Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
If your HDD shows up follow these directions to reformat and erase:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
Please do post back with an update on how it goes, and with further questions or comments, if any.
cornelius

Logic Pro X Problem please Help!

Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP

nenikos1 wrote:
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
A known problem with the latest Apple updates.
It's all over this forum, take a look around.

Z97M Gaming windows 7 installing problem, please help

hi everyone. I hope someone could help me. This is my setup I just built:
MSI Z97M Gaming (latest bios updated, v1.4)
Intel Core I5 4690S Cpu
2 sticks of Gskill DDR3 (2x4GB) 2400Mhz
Nvidia 970GTX 4GB PCIE video card
Samsung EVO 840 - 250GB SSD (latest firmware updated)
Corsair 750W PSU
And this is the problem: when i boot (from USB) Windows 7 SP1 setup, it runs fine until it asks me for a driver (which is missing) in order to proceed with installation. I suppose it's SATA driver, so I've copied last version of Asmedia SATA driver in my usb key. But when i point to it, windows setup says that no driver has been found! So it doesn't show the ssd and I can't proceed with setup. I've tried every subfolder of the "asmedia_sata_win78" main folder.
Also, I set LEGACY+UEFI mode in bios. I've also tried IDE mode for the sata controller, but nothing works
Any suggestion, please? Sorry for the bad english

do you have any other storage to try say standard HDD? to try it instead this SSD
Quote
Still, I boot from usb drive, still I point to intel 32bit storage drivers, still windows shows "Intel 9 chipset series SATA AHCI controller". But it doesn't find the hard disk
i suspect something isn't ok with your installation disk
since its unclear is it 32bit or 64bit and since accept 32bit drivers only
can you use a better one? and to make sure that it would have SP1 integrated

ITunes 9.2 + install problems please help.

hi guys i recently bought a new laptop and when i try to install itunes 9.2 or higher it shows an error.
error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
i really need itunes because i recently bought an ipod touch and i cant sync it to get any songs
any help is greatly appreciated.
thanks

error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
That's consistent with disk/file damage, tame.
Let's try running a disk check over your C drive. There's Windows 7 instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
[How to use CHKDSK (Check Disk)|http://www.w7forums.com/use-chkdsk-check-disk-t448.html]
Does the disk check find/repair any damage? If so, try another iTunes install. Does the install go through without the error this time?

!!instaling problem please help!!

hey i was trying to install starcraft on my macbook, it said that "you cannot open the application starcraft installer because it is not supported on this system. i want to know how to be able to install it, like what i have to do to fix it.
please reply with suggestions. thank you in advance

The System Requirements are PPC Looks like it may not install on Intel.
You could install Windows 98. I wouldn't but you could.
-mj
[email protected]

8.1.6 and designer 6i post install problem - please help

Hello all,
I installed designer following the install guide extremely closely. The install went off without a hitch. However, when I try to create and ERD, or any diagram, I receive this error:
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
RME-02124: Failed to execute SQL statement: insert into I$SDD_DIAGRAM_SEGMENTS (DIAGRAM_REF, SEQUENCE, GRAPHICAL_DATA, PARENT_IVID, PAC_REF) values (:diag_id, :seq, :data, :diag_ivid, :diag_id)
I'm fairly new to Oracle but I did have designer 6.0 working on 8.1.5.
Does anyone have any suggestions?
Thanks,
Damon

The same happened to me. It turns out that it had something to do with old windows registry entries that let the repository install program know that I had designer 6.0 previously installed on my system. The install apparently isn't wise enough to know that it is installing 6i. It checks the registry for the first Designer version identified and decides what repository components you need based on that. 6i uses the standard repository components (6.0 versions) and some new stuff.
If you read your install documentation carefully (Chapter 2, Step 14, Item 2), you will note that you need to select two components to install. If the repository
admin utility is <prior-version-aware> it neglect to even display one of those options and its easy to blow right past that screen without realizing something is amiss (that's what I did ;-P ).
Hope this gets you going,
As with any Oracle product install
-- Good Luck!! --
Sandi
null

EMU 1820m install problem please help me I'm going crazy

I've brought the EMU 1820m two days ago and for two days now I've been looking everywhere for an answer.
So I plugged the card in the computer, I turn the power on and... Windows doesn't detect the card. I look on the net and apparently it's because I have to delete the previous sound card in the bios and desinstall them. OK. I do it.
I reboot again and again and windows still doen't recognize it. Nothing. It's plugged but windows doesn't see anything.I look on the net for various solutions: trying a different PCI slot, changing where it's plugged to the power supply, nothing...
I was so excited to buy this card and now the disappointment is even greater...... Can anybody help me???

Windows doesn't detect anything... It's not listed in the device manager... I will try to find another computer to see if it works...
By the way, the power supply cable has three plugs, one for the card, one for the power supply and one for the hard drive (if you don't have any cable left on the power supply)... Where do I plug it on the hard drive? I'm trying everything, I'm desesperate....

How i can install my plugin in Logic X?! please help meeee :( i can't install all plugin in logic

How i can install my plugins in Logic X?! please help meeee i can't install all plugins in logic....Logic is original

4GB of RAM
Display with 1280-by-768 resolution or higher
OS X v10.8.4 or later
Requires 64-bit Audio Units plug-ins
Minimum 5GB of disk space. 35GB of optional content available via in-app download.

Very Strange Logic Studio Installing Problem, please help !

Similar Messages

Maybe you are looking for