Very Strange occurance when page with effect viewed in IE 7

I applied the spry (Fade/Appear) effect to a container.
The container contains text and images. When I test the page,
I noticed the images has strange white marks or scratches on them.
Has anyone noticed this? This only happens in IE 7. Not Firefox.
I also noticed a gap between the tabs at the bottom of the
page and the container when the effect (Fade/Appear) is applied.
There also appeared to be a latency when I click on the tabs
and when the effects happens.
Like you click on the tabs and the effects occurs after about
two seconds.
Can you adjust the time it takes for the effects to fire up
when you click on a tab?
Just wondering if anyone has experience any of these
problems.
Patrick

quote:
Originally posted by:
Newsgroup User
Webethics wrote:
> I applied the spry (Fade/Appear) effect to a container.
> The container contains text and images. When I test the
page, I noticed the
> images has strange white marks or scratches on them. Has
anyone noticed this?
> This only happens in IE 7. Not Firefox.
> I also noticed a gap between the tabs at the bottom of
the page and the
> container when the effect (Fade/Appear) is applied.
>
> There also appeared to be a latency when I click on the
tabs and when the
> effects happens.
> Like you click on the tabs and the effects occurs after
about two seconds.
>
> Can you adjust the time it takes for the effects to fire
up when you click on
> a tab?
You should post a link to your page so that others can see
what is going on, and potentially offer some suggestions.
I've not seen any "delay" options for starting effects. It
may be that something is interfering with start of the effect.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert
This is the URL
http://www.patrickjudson.com/weddingIndex.php,
The effect is on the first tab, not the others. you can click any
other tab and then click the first tab to see the effect. What I
mentioned above only happens in IE 7.
thanks again - Patrick

Similar Messages

Firefox is stumbling when pages with PDF content come up. how can i get my old version3.5.6 back?

Question
firefox is stumbling when pages with PDF content come up. how can i get my old version3.5.6 back?

Thanks for your response Cor el, I'll try that the next time it happens, it's completely random. One moment it functions normally then suddenly it changes its mind.
Restarting my pc usually brings it back to normal until next time.
One thing I've noticed, but not 100% sure there's a connection here.....I edit my websites online and log into cpanel which opens new pages in separate tabs, as it should do. It seems that this problem occurs when I'm logged into cpanel...if i'm logged in then open a new tab for regular browsing of other sites then all links on those sites also open in new tabs.
Ican't say for sure if it's always only happened when logged into cpanel, but certainly on the last 3 occasions.
At the moment it's behaving normally so much I can do to check your suggestions, but will try them the next time it occurs.
One other thing I forgot to mention too....since i've had the new firefox, I've noticed that when I log into yahoo and post comments, I often find myself having to log on for each new post. Everything was fine with old firefox and there have been no other changes to my pc .

SSL indicator disappears when page with video tag has been loaded

I have a strange bug in Firefox, that was detected when site moved to SSL.
There is single page site built on Backbone.
When page with video tag loaded SSL indicator disappears.
Firebug shows that Firefox create GET request connection to the server but it hangs.
All site logic work correctly. And video on this page works perfect, I can click play and new connection will be created and video played but first connection still hangs.
There is four page with video tag (four steps of wizard) and hanged connection appears randomly on this pages.
Actually this issue exists without SSL, but detected only when we moved to SSL and lock icon began to disappear.

The SSL indicator can disappear if there is mixed content on that page (i.e. coming via an unencrypted http connection).
Did you click the Site Identity Button (globe/padlock) and proceeded to the Security tab in Page Info?
*https://developer.mozilla.org/en/Security/MixedContent
*https://developer.mozilla.org/en/Tools/Web_Console

Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

I am having incredibly long lag times when working with effects in Premier Pro CC 2014. Like 60 seconds or more. This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point).
I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3.
I have seen that some people are having different versions of the same problem. I do have RedGiant plug-ins, but I am not using any of them in this project. The Red Giant plugs (again, not being used in the project) include MOJO and Universe. The previous version most certainly did not work like this. Any ideas? I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences. Still having same problems.
A specific example is I have an interview shot. I add brightness and contrast. Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays. I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect. Same deal -- ridiculously long times for effect changes to take place.
Does anyone have any clues as to how to fix these problems?
THANKS FOR ANYONE'S HELP!!!!!!!

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

I cannot open a new window for FireFox.
Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
The Downloads Window cannot be accessed either.
This is very annoying. Is this a bug? Or is there a fix.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19th. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

How to copy paste a new page with thumbnails view in Pages 5?

How to copy paste a new page with thumbnails view in Pages 5?

Feature removed along with over 90 others:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
Then rate/review Pages 5 in the App Store.
Peter

Very strange crash when displaying pdf tumbnails in iBooks 1.5

Hi,
Recently, I have experienced a very strange behavior in iBooks. The app opened normally and then, some seconds later, dispaly getts blak and the app closes abruptly.
I have traced back this behavior: It occurs just when the cover tumbnail of some pdf books is displayed in any iBooks' library view (both in bookshelf view and in Title view)
I removed the troubesome pdf, but found that some others ( wich worked fine fron a lot of time ago) produce just the same behavior.
When (using the painfully method of trial, and l, and trial again! And again,... ) i finally deleted all the crash - related pdf's, iBooks worked fine again.
The most intriging features related this behavior are: 1- It is related only with tumbnails. All the pdf are normally vieved using some other ipad psdf viever (such as Kdan Pdf Reader or Adobe Reader for ipad) 2- If yoy remove the cover as pdf first page ( even if you move such cover and put it as the second page, using software like pdf sam) the pdf works fine in iBooks.
I suppose this is a (annoying) bug, but,is there any suggestion? Is there any way to disable The tumbnail feature in iBooks?
Best regards

Somehow this bug came up on my radar yesterday later in the day: the first two comments indicate different plugins, and the third refers to the Acrobat plugin:
<blockquote>This seems to happen if Adobe Reader is used for displaying PDF documents (pdfjs.disabled set to true and Preferences > Applications > PDF to "Adobe Reader (in Firefox)"). Opening two tabs displaying PDFs and closing one crashes the other one. Was able to reproduce with Firefox 36.0.1 and Adobe Reader plugin "Adobe Acrobat 11.0.10.32". When I tried to reproduce it later again in the same profile (or on Nightly and Beta), the tab didn't crash.</blockquote>
https://bugzilla.mozilla.org/show_bug.cgi?id=1113190
Sounds like your issue, but it's puzzling that they got a tab to crash and in your case only plugin-container.exe crashed.

Strange Blank Services Page with a "Cancel" button

Hi All!
For some strange reason my Cisco IP Phone's "Services" button is associated, as default, to a blanck page with a single "Cancel" button as the 3rd softkey. For example, if I push the "Services" button, this default pag will be shown first and seconds later, the page I specified in Call Manager as associated to the "Services" button.
Usually this is not a problem, only that when I try to push a CiscoIPPhoneImageFile object to the phone, in the 2-3 second while the phone is downloading the image, this blank page will be shown and it stays there untill the image is fully downloaded. It is especially annoying as my ImageFile object has a 3rd softkey button called "Exit", so the user will witness a button first appeared as "Cancel", and then suddenly changes to "Exit"!
Any one know how do I remove this strange "default" blank page, or at least change its "Cancel" button to whatever I prefer? Thank you very much for your help!

Could it be that on the phone you're using, you have signed up for a service that turns the service list into something the phone cannot handle (e.g. the application name is too long)? The empty page with a cancel suspciously reminds me of what you get when the phone chokes on an xml element.

Very strange sound when using VoiceOver

Hi I am using my apple tv with VoiceOver when I am whatcing one of my movies that whas both
from iTunes Store and I puch the upp bottom on my remote 2 times to get the more info about
the movie I get a very strange sound don't know how to desgribe the sound it dose only come up
when the info aout the movie is up or any popup like window or is my hearing to good for my.

And now the stranger things here... I didn't do much change to both the remote bean side and the client side, what I did is most like change it to something, and tried with failure, and change back.
But today 's morning, when I just change everything back to suppose to be, and it can find the homebean:
[2008-11-14 11:21:18,436] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) Looking up RepairEJB with JNDIName: RepairGatewayEJB_slsb
[2008-11-14 11:21:18,531] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) h is not null!!
[2008-11-14 11:21:18,532] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) got h: weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,533] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After ctx.lookup();
[2008-11-14 11:21:18,535] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) homeBean is weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,537] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After home bean;
[2008-11-14 11:21:18,589] [ INFO] [Thread-85] - Waiting for a request ...
but unfortunately again it just stopped at
remoteBean = homeBean.create();
with no errors and exceptions...
Does any experienced friends ever have this problem before?

IC WC: Exception occured when combine with Custom Controller

Hi All,
I was trying to combine a context node in my application to the context node "CurrentContext" of custom contrroler CuCoBDC.do however the following exception occured when I tried to display the page: "BSP exception: The object CuCoBDC.do in the URL /sap(bD1lbiZjPTAwMQ==)/bc/bsp/sap/crm_ic_preview/root.do is not valid."
Can anyone please give me some hints?
Thank you
Heather

Hi heather,
can you please check the BOL entity used for both custom controller and view contex nodes are the same!.
also do check the binding code in the method create_context_node( ) in _CTXT class of the view!.
Regards,
sudeep.

Strange behavior when resizing with 'Selection Tool'

Hello,
I have a really strange issue when using selection tool to resize object. I have several rectangles stacked and grouped inside a layer. When I select one of them (either in Layer panel or with Group selection tool) and switch to 'Selection Tool (V)' to resize it, this tool behaves diferently at diferent zoom levels. Only at 200% zoom it behaves as it shoul.. With 100-150% zoom result is diferent - like there's a invisible box around selected object and I'm resizing it.. I've tried to explain the issue in attached image.. Anyone knows why is this happening?
Thanks.

- make new document, size 16383x16383px
- create rectangle any width, hight say 200px (or anything less then 320px for 5% zoom)
- select rectangle and show bounding box
- try resizing hight by stretching bounding box
- this is how same selection looks at diferent zoom levels
- same zoom level as befor, hight 100px..

Very strange behavior when on charge.

When on charge at night my 5s opens and plays random Utube videos from time to time. Last night as we were laying in bed just about to go to sleep we heard my phone clicking, it turns out it wrote a short text message to someone on my contact list, its nothing to do with siri as we were both silent and about to go to sleep when it happened. Has anyone else heard of this.

I had this very same problem when i did the switch. The thing was that there where two tools providing this functionality. The gnome power tool thing and some acpi feature started with systemd.
Try disabling one of them.

Very strange bug when using a view with a date

Hi,
Just thought I'd point out this bug I'd found and see if anybody has had similar problems.
I'm connecting to Oracle 9i from servlets using the thin client-side JDBC driver. In the Oracle schema I've got a few views to another schema set up. One of them looks like this:
select
blah
blah
from
projects
where
project_start_date between '1-Apr-2000' and '31-Mar-2010'
Nothing wrong with this, you'd think. And indeed, the view works fine and any valid queries on the view also work fine if they're performed from anywhere apart from my servlets. The servlets can perform queries on all my other views but they think that this particular view is completely empty.
As soon as I change the view to:
project_start_date > '1-Apr-2000'
the servlets can see the data in the view.
Hope all this made sense. Anybody else had any similar problems?
Chris.

Any time you want to do a date comparison, you really want to do an explicit to_date conversion rather than relying on Oracle to do it implicitly. I'll wager that if you change the view to
SELECT <columnList>
FROM projects
WHERE project_start_date BETWEEN to_date('1-Apr-2000', 'DD-MON-YYYY') and to_date('31-Mar-2010', 'DD-MON-YYYY')that everything will work.
Justin

Very Strange occurance when page with effect viewed in IE 7

Similar Messages

Maybe you are looking for